Need to disable users from using nquser and nqpassword in the url with SSO

Is this possible in OBIEE or do I need to creat a mod_rewrite rule to remove nquser= & nqpassword?

suggestion or two in here :
http://kr.forums.oracle.com/forums/thread.jspa?threadID=295697&messageID=3128576
I always thought there is tag that goes in either instanceconfig.xml or another config somewhere (SSO?) to disable this, cant seem to find the reference to it anywhere.

Similar Messages

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

In Editor, go to the expert tab.
Open picture B, the one you wish to select the "replacement" face from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the face. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the face from picture B to cover the face on A
In the layers palette you should see picture A as the background layer, and face B on a separate layer

Neo2: Which bios should I use? And what's the deal with SATA?

I'm fixing to put together a new box using the MSI K8N Neo2 Platinum. In taking various preparatory steps, I happened upon this forum. I'm very alarmed by the apparent fact that there is not a single good bios out there yet. 1.2 reportedly sucks. 1.3 reportedly sucks. Especially if one wishes to overclock, as I do. I intend to go to 250+ FSB, 1:1. People are reporting things like not even being able to increase the voltage adequately!
Well, it seems a safe bet that some people have been able to overclock all they want, or else the Neo2 would not have achieved its generally accepted status as the best possible socket 939 motherboard, particularly for overclocking. That means there's a bios out there that I'd be well-advised in using. If it's not 1.2 or 1.3, what is it? And what's this 1.52beta I've heard about which supposedly fixes everything? Is that for a competely different board?
Now, as for SATA. I am going to be using a single SATA drive. I've read something about how "3 & 4 are locked, but 1 & 2 aren't". I am not able to translate that sentence into anything especially meaningful to me, but the gist seems to be that using a drive on the 1&2 port will, because of an Nforce3 bug, prevent one from overclocking past 230 FSB. So, does this mean I will need to use the other SATA port for my single drive if I want to go past 230? Or is this old news, long since fixed somehow?
Thanks in advance!

Unfortunately I am not sure about the bios version.
But with SATA and overclocking the speed is not locked on ports 1 & 2 but 3 & 4 are locked. Basically when you overclock your system and your drive may run into problems. As far as I am aware from what I have read in the forum there is no limit on OC'ing with the drive in 1 or 2 but you can get sporadic issues
The general guideline is when overclocking use SATA ports 3 & 4.
Hope this made a little more sense (it was difficult for me to put into words)

GPO: CD and DVD: Deny write access prevents user from using their USB Pen drive, but other users or ok

My Users have secure pen drives that launch a CDROM partition with a secure logon app that decrypts the main USB mass storage element of the pen drive on successful logon. The problem I have is that users who install the usb pen drive cannot then
initialize the CDROM launcher app to input their password to access the mass storage element of the pen drive making it useless.
However, any other user that has the same type of pen drive who then plugs it in to the endpoint that already has the drivers installed is able to access their own pen drive or the other users pen drive (providing the know the password).
So I've isolated the problem being down to the presence of the GPO setting stated above on the Removable Storage Access Policy, and by not having this policy in place when a user installs the pen drive they have no issues, but I can't find a way to clean
up a user who is already broken even if I remove the GPO from that user, delete their local profile so that they logon as a new user (no roaming or other data) and use a variety of utilities such as USBOblivion to clear out the registry and file system of
the USB device and installation. When the original user logs back on and then installs the usb pen drive again they have the same issue, but no other users do. I have the same issue if I try this with an alternative user or admin as the first user after the
'clean up'. Everyone else can use the pen drive except the user that originally installed it when the GPO was in place.
If I move the user to a new endpoint or rebuild their endpoint then they have no problem being the installer of the usb pen drive and then using it since the GPO was removed, so what I need to know is what is it about the USB install and the GPO that
is tattooing in Windows somewhere and how do I remove it?

Hi,
In my opinion, this is probably not Windows GPO problem. To confirm the suppose, you can follow the path below to check GPO settings if there is any change after the software installed.
Computer Configuration\Administrative Templates\System\Removable Storage Access
User Configuration\Administrative Templates\System\Removable Storage Access
These two policy manage system and current user Removable Storage access.
If there is no change with these policy, it would be better to contact the manufacture of the driver for further assistance.
Roger Lu
TechNet Community Support

Have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,. Has anyone had this happen and if so what is the fix?

have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,. Has anyone had this happen and if so what is the fix?

Is it possible to post a sample page some place for us to try out (dropbox or acrobat.com)? Is your Acrobat updated? What version of WORD are you using?

I want to see list of Disabled user from AD and LDAP

Hi
i wan see the list of disabled user from AD and LDAP and it shows in the next page as Tabular format
having all the details of AD (Attributes)

Hi
i wan see the list of disabled user from AD and LDAP and it shows in the next page as Tabular format
having all the details of AD (Attributes)

How to restrict users from printing documents and exporting to local file

Hi SAP gurus,
I have two questions.
1. How can I restrict users from printing a document? i.e. billdoc? I would like to know if I could block it though authorization. If yes, what auth obj to use?
2. How to restrict certain users from exporting to local file? the System> List>Save-->Local File. I have tried restricting it using auth object S_GUI but it seems it is only applicable to older versions of SAP. im on ecc6.
Thank you in advance.

Hi,
Check this:
Create your own gui status and attach it to the list in the event START-OF-SELECTION.
In the menu painter extra -> adjust template.
Make it a list status and you will see all the standard list options appear including list->download
Deactivate the ones you don't want.
If you just want to prevent users from downloading the list you can achieve this with authorization object S_GUI, activity 61. Menu option will still be there though.
Please note that if you remove authorisation for S_GUI activity 61 then all downloads will not be possible.
If you just want to disable downloads only for a particular report, you can try this test program:
Code:
REPORT ztest.
DATA: PROGNAME LIKE SY-CPROG value 'Z_CHECK_AUTH',
        FORMNAME LIKE SY-XFORM value 'F_CHECK_AUTH'.
START-OF-SELECTION.
    CALL FUNCTION 'SET_DOWNLOAD_AUTHORITY'
         EXPORTING
              FORM    = FORMNAME
              PROG    = PROGNAME
         EXCEPTIONS
              OTHERS = 1.
WRITE: / 'TEST'.
You also need this:
Code:
PROGRAM z_check_auth.
FORM f_check_auth USING pe_result TYPE i.
pe_result = 5.
ENDFORM.
Also have a look at the exit SGRPDL00.
Hope this helps you.
Rgds,
Raghu

I migrated a user from another mac and cant get any updates to install!

Hi
I migrated a user from another mac and cant get any updates to install, for example it says iPhoto is intalled but its not, i never copied it from the older imac, and i cant download it to this one now
any help appreciated

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

I moved from an old macbook to a new one. I copied all my files onto a hard drive. On trying to setup my mail, i went into documents, microsoft user identities, office 2011 and it shows the database but wont let me select it. Urgent help pls

I moved from an old macbook to a new one. I have installed Office for Mac 2011. I copied all my files from my old notebook onto a hard drive. On trying to setup my mail, i went into my hard drive and accessed microsoft user identities, office 2011 and it shows the database but wont let me select it. Its almost as if the file is there but not accessable. I desperately need to access my old mail. How do I do this? I am fairly confident that I copied all files off my old notebook. Is there a way for me to search for the Database file? Maybe I copied it to a different location? Urgent help please.

Hello mafrerichs and welcome to Apple Support Communities,
Simplest way is to use Target Disk mode:
How to use and troubleshoot FireWire target disk mode - Apple Support
and hook to another Mac and use CCC or SuperDuper and clone your HD to another drive.
You could also pull the drive out of your MBP and use an external USB case or SATA - USB dongle to hook it to another Mac.
"MacBook Pro (15-inch Late 2011),... have a 15" 2012 Macbook pro with 2gb of ram, i7 processor"
That's a little confusing?

Need to restrict users from adding or modifying folders or reports

Requirement: Need to restrict users from adding or modifying folders or reports through Info view and to reflect the modifications only thriough LCM.
Issue: Customer wants to restrict users from adding or modifying existing reports from Infoview and need to force users to do make the changes through Life cycle manager tool.
As per my understanding LCM can only be used to to promote folders and objects from one environment to another and to schedule the promotion of these jobs on a daily basis.My query is:
Can we add or modify existing reports or folders using the LCM tool?
Could you please help me out in this issue and provide me your suggestions.
Thanks in advance.
Prashanthi Rayaprolu.

You can not restrict that using LCM. Need to modify the rights at the folder level.
Explicitly remove the following rights for the user group,
Add objects to the folder
Edit objects
Delete objects
Copy objects to another folder (check this if required)
Once the above four are denied then users wont be able to Edit/Add/Delete reports in that folder.

Is it possible to prevent users from using the ''Purge'' option from the ''Recover deleted items'' in Office 365?

Hi,
After speaking with a Microsoft engineer over the phone, I've been told that there is no way to prevent users to go to their OWA and manually Purge specific items from the ''Recover deleted items''. The Microsoft tech told us to place the desired mailboxes
on a litigation-hold and that all data will be recoverable... but only from the time you place the mailbox onto Litigation-Hold and previous items, which doesn't take effect for new-coming emails.
1- From what I understand, any new items coming in the mailbox after the Litigation-Hold is put in place will still be ''purgeable'', right?
2- Is there a way (PowerShell, Security group, etc.) that can prevent a user from using the Purge option?
We are very surprised that there is absolutely no thread that talks about this issue, which in our opinion, is a major legal and security flaw from Office 365. This is a main concern for us to actually go with Office365. For instance, this means that at
any given time, if a user exchanges emails with a competitor, they can manually purge emails sent and receive as soon as it is sent/received, even after Litigation-Hold is in place.
Thank you for your reply and let us know if you have more questions.
Normand Bessette, IT support technician, Newad Media

Thank you for the reply.
Is there still a way to prevent users from using the Purge option, like with a Powershell script to disable Purge?

Disabled users still on Lync and client contact list

Any way I could cleanup disabled users in Lync? I also realized such users are still on contact list of users. Any process to automatically clean users up when they are disabled in Active Directory. Am seeing terminated users in the Lync systems.
Any help will be appreciated.
Thanks!
Alert from TechNet Posting

You need to disable users for Lync Server, as the address book updates, the contact information updates, then non-existing contacts disappear automatically.
Lisa Zheng
TechNet Community Support

Restrict users from using Manual series

Hi SAP,
Is there a way to restrict users from using the Manual series?
Thanks,
Janice

Hi Rahul,
Ok, i have seen already the authorization for document manual numbering and it is available only for 8.8 versions and not on 2007 version of SAP.
Anyway, when im doing the testing i found out that for banking transactions like incoming, user can still use the manual series even if he has no authorization for manual document numbering.
Another concern from our client was the use of manual series only, is it also possible in SAP? I tried to give user authorization in the manual document numbering and no authorization to series group no but user cannot already open the transaction window. Let us know if their inquiry is possible so i could inform them that only manual series can be restricted.
Thanks for your help.
Regards,
Janice

My iphone broke and i need to enter in icloud from my pc and it sais the account hasn't been verified

My iphone broke and i need to enter in icloud from my pc and it sais the account hasn't been verified, how can i do it?

You need to respond to the verification email from Apple by clicking the Verify Now link. Make sure you check the email address you used to set up your iCloud account. Check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

To restrict a user from using a custom transaction

Hi,
I have a created a custom transaction ZTEST. Now i want only a few users to use this and not all. How can i achieve this. I see an authorization object in the SE93. But can anybody explain me in detail regarding the same ?
Regards,
Pramod

Hi
We can use authorization to restrict the access to a perticular transaction. Permitted Activity configurations are performed into it.
Before a User can be granted permission by the Authorization Object, the Users Master Record is assigned a Role, which includes a Profile.
The Profile contains what is simply called the Authorization and is where the specific data for the Authorization Objects field is assigned to the configured Permitted Activity.
You need to create a role or modify any existing role, using t code pfcg . On the authorizations tab in Maintain Authorization Data and Generate Profiles, press the Change Authorization Data button.
On the next popup screen named Choose Template, select the Do not select templates option.
Press the button Manually, and enter the authorization abject attached in your transaction.Select the Tick button to continue.
Expend all the nodes.
Press edit icon or line 'activity'. and choose the one which you want to allow to user.
Generate the Authorization using the generation.
Now all the users who has a role attached which you edited or created, will not be able to execute that t code.
go to t code su01 to attach role to perticular user.
Regards
Vishal Kapoor

Need to disable users from using nquser and nqpassword in the url with SSO

Similar Messages

Maybe you are looking for