Need to do any configuration settings in BES while implementing BO Mob ?

Hi All
We are implementing BO Mobile 3.1 SP3 for BlackBerry devices.We have implemented it and also setup OTA client application delivery and downloaded client application into our mobile and lauched the application by configuring with needed settings.But while trying to login from mobile ,its throwing the error as " Invalid credentials".I am using the same credentials which i used for accessing Enterprise server and CMS also.Basis team has no idea of where to create new credentials for mobile access.
They have done every required settings with reference from deployment guide provided in the BO site, except on the BES server for which they dont have authorization.
Do we need to do any configuration settings in BES server??
Thank you.
~Ravi
Edited by: ravindhar on Oct 3, 2011 10:40 AM

Hi,
I am exactly at a similar position. I followed a detailed steps from this tutorial
http://wiki.sdn.sap.com/wiki/display/BOBJ/SetUpSAPBI4.0MobilewithBlackBerrySimulator
But I am not able to log in. Were you able to resolve your issue. Can you help me to see if I need to perform any other configuration.
Please let me know,
Thank you

Similar Messages

  • Do we need to make any confif settings in the SAP R/3 system before replica

    Hi
    Can any one suggest me  do we need to do any config settings in the SAP R/3 before replicating material groups and materials from R/3 to SRM?
    Please suggest me.
    Regards
    Srujan.k

    Adding to Akash
    /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm - it is one of the best blog from Marchin's
    blog step by step procedure
    regards
    Muthu

  • Need help with 6300 configuration settings

    I can't get sms, email or web to work on my lovely new 6300 phone (an xmas present from my daughter) :-(
    I travel between England and France and have an Orange sim card for England and an SFR card and contract in France (Orange doesnt work in the mountains).
    I managed to text when in England with the orange card. On arriving in France I found the phone was locked to Orange (first headache, given that I live in the country, over 50 miles from any Nokia dealer). I got the phone unlocked, but SMS etc were still not working and local mobile outlets hadnt a clue. So I'm on my own.
    Rummaging around this site I realised I probably needed to additional settings, and downloaded these.
    Now for the real nightmare: how the hell to set these configuration settings. I seem to be going round in circles. Is there anybody out there who could help me make some sense of the following settings???!!!
    Although helpful, this site is not good at explaining the significance of the following (and whats more I feel they should probably be listed in the reverse order?)
    - default config setting
    - preferred access point
    - personal config setting
    DEFAULT CONFIG SETTING
    I have a choice of
    - orange (inherited with branded phone and presumably needed when back in the UK?)
    - personal config
    - SFR MMS (downloaded by me from Nokia)
    - Wanadoo (downloaded by me from Nokia)
    Ive chosen personal config (see below)
    ACTIVATE DEFAULT IN ALL APPS
    I have said no ??
    PREFERRED ACCESS POINT
    Ive created one called 'Fra access point' (see next) so as to have alternative to all the orange ones,
    PERSONAL CONFIG SETTING
    I've made three: FRA access point, FRA mailbox and Fra web
    The access point has data bearer as Packet data (dont ask me what this means!) and I made up my own user name and password
    Well, there you are. I would at least like to have the sms working (I suspect the email may be another hurdle as my pop and sms servers are different).
    I do hope someone can help me

    I was disappointed by the deafening silence which followed my cry for help - perhaps a bit too meaty for a Friday afternoon?
    Anyhow, amazingly, after a loooong and expensive phone call to SFR (Vodaphone) the problem has been resolved (sort of).
    I had been fiddling around with the configurations under Settings. It turned out there are MORE settings under Message settings and these included the need to specify a number for the Message Centre. (Nowhere on the SFR site is this number given, plus their link for downloading configurations is not working...)
    Be warned, I might be back in a week or two when I have more energy to tackle email.

  • Need info on BW Configuration settings

    Hi Experts,
    We are implementing new BW system (BI 7.0) along with ECC 6.0 for our client.
    As this is the first BI 7.0 implementation for me, I appriciate if anybody can send me the documents for configuration settings which we do in BI as well as in R/3 side.
    Also send me some blue print documents as well.
    My email id : [email protected]
    Thanks in advance

    hi nitin
    http://help.sap.com/bp_iasifrsv1470/BBlibrary/Documentation/I67_BB_ConfigGuide_EN_DE.doc
    check the above link
    jeeva

  • Any extra settings I need to make for Sql Server 2012 Install for the purpose of SP 2013

    Hi,
     I am going to install sql serevr 2012 Ent on a stand alone server Win 2012 box[ say Server2] and I want to make this machine as a db box and will make other box[say Server1] SharePoint box.
    [ On Server1 where there is no sql server installed ].
    Do I need to make any extra settings /any mappings/config entries in this box before I install sql on this  Server2 box.
    I mean, in terms of creation of a separate sql instance is required etc ....
    In my prev.installations as a standalone SP install with sql installed on the same box.
    I am facing issue with development with SP 2013. Because though I am having 16GB RAM in one of my dev machines,  with the s/ws like VS 2012, SP D 2013 along with SP 2013 & SQL SEREVR 2012, the debugging is almost NOT
    happening[ its taking "minutes" to hit a breakpoint] at all. 
    help is  appreciated!
    Das

    HI Shankar,Just to be sure with the following settings to configure sharepoint.
    Ensure both boxes in same domain and network
    ensure the connection \telnet is working.
    to instal sharepoint,farm account should have below rights on sql DB.
    db creator,securityadmin
    Check the below link for instaltion of sharepoint 2013.
    http://expertsharepoint.blogspot.de/2013/11/detailed-sharepoint2013-installation-i.html
    Anil Avula[Microsoft Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • ChangeConfigurationByName fails with "The specified configuration settings for Settings are invalid."

    Hello,
    I am tryint to update deployment and always have following error
    "The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers."
    Have found similar
    thread  and
    stack overflow - without any success. I am not chaning anyting. Just reading deployment configuration and tryint to update with the same settings. I use .net azure sdk  wrappers to generate requests. Code looks like:
    var deployment = client.Deployments.GetByName(location.DataCenter, location.Cluster);var result = client.Deployments.ChangeConfigurationByName(location.DataCenter, location.Cluster, new DeploymentChangeConfigurationParameters{  Configuration = deployment.Configuration});
    Catched request response from fiddler:
    POST https://management.core.windows.net/[subscription-id]/services/hostedservices/[service-name]/deployments/[deployment-name]/?comp=config HTTP/1.1
    x-ms-version: 2013-11-01
    User-Agent: Microsoft.WindowsAzure.Management.Compute.ComputeManagementClient/0.9.0.0
    client-tracking-id: 2
    Content-Type: application/xml
    Host: management.core.windows.net
    Content-Length: 544
    Expect: 100-continue
    Connection: Keep-Alive
    <ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
    <Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
    <ExtendedProperties />
    </ChangeConfiguration>
    Response
    HTTP/1.1 400 Bad Request
    Cache-Control: no-cache
    Content-Length: 351
    Content-Type: application/xml; charset=utf-8
    Server: 1.0.6198.51 (rd_rdfe_stable.140226-1543) Microsoft-HTTPAPI/2.0
    x-ms-servedbyregion: ussouth
    x-ms-request-id: dcb1c5aedb5872d4aaf90acfede2de0b
    Date: Tue, 04 Mar 2014 13:38:10 GMT
    <Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Code>BadRequest</Code><Message>The specified configuration settings for Settings are invalid. Verify
    that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message></Error>
    the same data returned by operation status. Decoded base-64 encoded string looks like
    <ServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration">
    <Role name="yauhen-ccis2">
    <Instances count="1" />
    </Role>
    </ServiceConfiguration>
    Have tried without new line symbols, without xmlns, updating by production. without any success

    Hi,
    The configuration file is a file with extension .cscfg. If you have Visual Studio, the file is automatically generated when you create the project, and automatically updated when you modify the project's properties.
      >> Not sure were could I get content of this file from api?
    It's needed to encode this file's content use base64, and put the result in the body of your request. (Please refer to
    http://msdn.microsoft.com/en-us/library/windowsazure/ee758710.aspx for more information.) 
      >> <ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
    <Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
    However, may I know how you find the body for your request? (It seems you do a base64 decoding, you find it is a valid configuration file, but it doesn't have any configuration settings.) Actually, the settings defined in csdef needed to
    be contained in the configuration file.
    Best Regards,
    Ming Xu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • CELL/LINE configuration settings

    Hi all,
    Can someone tell me what steps of the <b>CELL/LINE configuration settings</b> are while designing document window in SEM/BPS? I went to SAP Libary but couldn't find any information about it.
    Thank you.
    J.

    John
    Check these links. I am not sure whether it is useful or not.
    http://help.sap.com/saphelp_sem60/helpdata/en/d6/b13edf8b8211d3b7360000e82debc6/frameset.htm.
    http://help.sap.com/saphelp_sem60/helpdata/en/28/56b63e1734e16fe10000000a114084/FrameMaker_EN.pdf.
    Thanks
    Sat

  • VLAN - require any configuration on server side/host level ?

    Hi all,
    I always thought VLAN separate broadcast domain, and create "virtual" LANs across 1 physical switch.
    Also, it is a configuration to be done on the network switch side, any packet that goes into a VLAN interface, will be tagged automatically according to the VLAN it is connected.
    ==============================================================
    However from the link below ->
    http://www.linuxhorizon.ro/vlans.html
    It seems like VLAN is done on the server side/host OS as well.
    ===============================================================
    Q1) can i confirm if we need to set any configuration on OS level for VLANs ? If no, what is the link above trying to achieve ?
    Regards
    Noob

    With a normal client connection, as CF says, there is no need for any special vlan configuration on the host.
    However I think that link is referring to using a trunk from the host to the switch.
    Hopefully you read my other response before this one but when I talk about trunk above I'm not talking about how Unix refers to a trunk, I am using Cisco terminology.
    A trunk in Cisco terminology is a link that can carry traffic for multiple vlans. And you can run a trunk to a host device and then that device can send and receive traffic for multiple vlans.
    It's not often done with PCs but it is more common with servers although a lot of servers still are only a member of one vlan.
    Without wishing to confuse you a common setup in the Cisco world is an etherchannel trunk between switches ie. a single logical link made up of multiple physical links that can carry traffic for multiple vlans.
    Jon

  • How do I remove All OS X Server data and configuration settings

    My server app crashed and I deleted the app using app cleaner and removed the server file from the Library folder, owever when I try to reinstall the setup defults to the setting from the initial install.  Is there a way to remove all the stored data, profiles and OD included) as well as any configuration settings, such as those for AEBS and host name and ip address.  Essentially, I would like to perform an install that is the same as the initial, a truly cela install.  I am using a Mac Mini 2013 model as the server and MBP 15" as the main client.

    Completely clean install?  Wipe and install OS X, and then reload Server.app and configure that.
    Might want to report the error to the App Cleaner folks, too.

  • HT201304 I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?

    I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?
    This is so our guests cannot tamper or disable the device. We are already using Apple Configurator but their does not seem to be a way to lock down settings without a PIN.

    There's a lot of restrictions information in Chapter 19 of the 4.2 User Guide.
    http://support.apple.com/manuals/#ipad
    By the way, a more extensive version of the User Manual is available at no charge through iBooks.

  • I am running my first time machine backup onto a Western Digital MyBook Live.  It is taking forever.  Is there antivirus software running in the background or any other settings I need to change to speed it up?  Also I am on a wireless network.

    I am running my first time machine backup onto a Western Digital MyBook Live.  It is taking forever.  Is there antivirus software running in the background or any other settings I need to change to speed it up?  Also I am on a wireless network.

    The initial Time Machine backup can certainly take a long time over wireless. Days, possibly. It's impossible for anyone here to be able to predict how long it will take, and wireless environmental conditions can change at any time.
    Is there antivirus software running in the background
    Only you can determine that. If you're using third party AV software, anything is possible.
    NAS devices may not be compatible with Time Machine, regardless of what their manufacturers may claim. Even after the Time Machine backup completes, your backup may be unreliable. You may not discover that until you need to rely upon the backup for some reason, and corruption can occur months or years from now.
    Time Machine supports the following backup configurations:
    A locally mounted volume
    Time Capsule
    A volume resident on a USB hard disk connected directly to a Time Capsule or current production AirPort Extreme Base Station.
    That's it. Any configuration other than the above list places you in an experimental category. If your backup fails, you're on your own.

  • Do I need to change any settings to connect my mac book pro to my tv?

    Do I need to change any settings on my mac book pro to connect to my tv

    Almost certainly, yes. Did you want to know which settings?
    Exactly what settings you would need to change, where, and to what would depend on many factors, including at least the following:
    * what model MBP you have (which will tell us the connector available),
    * what version of Mac OS X it runs (which will tell us the settings available),
    * what sort of TV you have (resolution, what connectors it offers, how they are switched, etc.),
    * what connecting facilities you have (like wires or an AppleTV),
    * how you want to use the TV (primary screen, secondary screen, mirror screen, sole screen),
    * whether you want to play audio through the TV,
    and even
    * where the TV is located with respect to the MBP.
    Simple case: New enough MBP to have HDMI output, running a recent OS X, TV new enough to have an available HDMI input, an HDMI cable on hand, using the TV as a secondary screen, and you don't care about how the screen positions relate or where the audio plays. You might be able to get away with default settings on the computer, but you'll still probably have to switch the TV to the HDMI input, and you'll have to drag windows onto the new screen.

  • I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

    I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

    Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
    The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
    (Error code: ssl_error_cert_domain)
    This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
    If you have connected to this server successfully in the past the error may be temporary and you can try again later.
    I have tried many many times!

  • I have Configured SSL,  Do we need to make any further changes ??????

    Hi all,
    I am new to SSL.
    I have a question.
    We have just configured SSL in our Web Server to make the site secure.
    We have a Registration Form in our site and Customer fills it and submit the form so we want to
    make Registration Form secure.
    I want to know that do we need to make any further changes in
    our program (Servlet/JSP).
    I mean, do we need to use/implement JSSE package API in our program.
    Please help me in this way.
    amitindia

    Your engine may or may not use JSSE - nbut unless
    you're opening your
    own Sockets, you don't care.
    What's this mean......
    We are not using Socket Connection in our program (in
    our database driven website).Then you're all set. What I meant was, if you're creating new Sockets in your Servlet (which is not typical, but I've seen it done), then you'd need to worry about how to make an SSLSocket. Since you're not, you're all set.
    As u explain that we have to replace http to https.
    Is this is the only changes we have to make or any
    other changes tobe made?No - change your URLs, and then read up on how to set up your ServletEngine so that it supports SSL, and you should be all set.
    Grant

  • Need quick TIP: remove "Copy access and configuration settings" from added package

    I added a modified package in APPVMAN with the option "Copy access and configuration settings".
    Package is unpublished. But shows AD groups as a current package because I used the option "Copy access and configuration settings"
    QUESTION:
    How to Remove (and then add) the option "Copy access and configuration settings" from added package.
    Cannot find it.
    Thanks.
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

    sorry for the panic :)
    before publishing an updated package to existing groups of initial package I hit the option
    "Copy access and configuration settings".
    But first I wanted to test it for TEST group. Didn't think that AD settings will be applied (do it first time).
    Just to confirm:
    1. I will remove current groups from updated(unpublished package)
    2. Will add Test group and test the package.
    3  In case it is OK I can then add removed(needed) groups.
    I want to be sure that after removing and adding needed groups all other settings will be intact.
    Thanks.
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Maybe you are looking for