Need to enable Transform Panel to enter info.

New at Indesign. Have a course assignment to complete - need help.
Trying to set up a new document. double clicked rectangle tool. selected top L circle in grid but transform panel is not enabled.
How do I get it to allow me to enter my W/H/X & Y values?

annam,
If you are talking InDesign, the forum is over here:
https://forums.adobe.com/community/indesign

Similar Messages

I need to enable my password to make purchases from I tunes. It was disabled because I entered it incorrectly too many times.I reset it but that didn't help. The message is "your apple ID has been disabled". Customer support will only help if I pay $29.00

I need to enable my password. It was disabled due to too many wrong entries. I reset it several times and I can log on to my account info but can't make purchases. The message is " your Apple ID has been disabled" Apple support will only help if I pay $29.00. Help!

Hi David , Contact your bank they may have disabled your credit/ debit card because of an unusual amount of small purchaches of APPS , ALBUMS etc....... Has your name been changed if so create a new Apple ID and RELAX. BANKS TREAT THIS AS FRAUD they may need you to confirm you purchased them APPS.
davidfrommohrsville wrote:
I need to enable my password. It was disabled due to too many wrong entries. I reset it several times and I can log on to my account info but can't make purchases. The message is " your Apple ID has been disabled" Apple support will only help if I pay $29.00. Help!
Jack
<Edited by Host>

Inconsistent values in Info Panel and Transform Panel

Does anyone know what circumstances would cause inconsistent values for Width and Height to be shown in the Info Panel vs the Transform Panelin AI CS6? For instance, I have a vector object selected and the Transform Panel has "80 in" for the width value and the Info Panel shows "96.8654 in". Height is likewise screwy. Should this ever be happening? Is it possibly an AI bug?

That's not normal. Try a restart.
If that doesn't help, try and trash the preferences. Or try this method http://www.bugge.com/Family-and-friends/Illy/illy.html

Need to extend the visible character field in the Transform panel y axis

Just a minor thing, but in the Transform panel, the Y axis text entry field only really allows four visible characters. My vertical site I'm working on may be a bit long, but it's into the five-digit realm at this point, and that last hidden digit keeps me awake at night. ;-)
For example, in the pic below, the coordinate is actually y=12005.
I know, there are bigger fish to fry. ;-)

I suggest you purchase a case and have a dedicated support engineer work with you directly:
http://www.sdn.sap.com/irj/boc/gettingstarted
Or
http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=jFmmLgoBAlcAAALO-iYAAAAP&rests=1278687224728

Firefox freezes on sites into which I enter info, like survey site and especially facebook.

Firefox freezes on sites into which I enter info, like survey sites and especially facebook. On a particular survey site, I filled in the dots for how much I like or disliked their product. After I was done, my firefox screen went grey and my computer became unresponive. I had to shut it down via task manager. The biggest problem is with face book. If I write long messages then I am okay... most of the time. It's inconsistent. But the result is usually a grey screen and I must follow the procedure above. I tried the same thing on myspace and oddly I didn't have this problem. Also, on facebook, while typing a message it will not scroll down when I get to the end of the page, such as this page just did now. Therefore I can't see what I'm writing at certain points. I recently reinstalled Vista Premium Home edition and then installed the newest version of firefox. Everything was fine til yesterday. So I reinstalled firefox and change my lag time to -1, but that didn't help either. Had a problem with adobe earlier too, so I don't know if that has anything to do with it. That's all I can think to tell you. Thanks for the help!
== URL of affected sites ==
http://http://www.facebook.com/
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET4.0C; .NET CLR 3.0.30618; Creative AutoUpdate v1.10.10)

Hello Kelly.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.

Need to enable admin acct with user permission..

I have change the acct type and made ID that is disable an admin.. is the only admin acct in my desktop... when ever i tried anything with admin permission. the AUC will pop up but no where to enter my admin Password... run as does not work either.. because
the only admin acct is disabled..... please help... and I have the computer to login automatic on start...

Hi,
Since all administrator account was disabled in your system, there is no way to run a program that need admin rights.
You do need to enable administrator account in Computer Management.
Roger Lu
TechNet Community Support

Need to enable html snippet insertion in CS4

The insert html snippet option is disabled on my insert menu and I need to enable it. Please help. Thanks.

Hi,
The website administrator has to enable the permission for inserting HTML snippet, for your role, for the Insert HTML Snippet menu to be enabled. If you are the website administrator, you can follow these steps to enable the Insert HTML snippet menu item:-
Launch Contribute and select Edit -> Administer Websites, and select your website.
The Administration dialog for your website will be shown.
Select a role (for ex, Administrator), and click Edit Role Settings button.
The Edit Role Settings dialog will be shown.
In this dialog, select Editing from the left panel, and check the check box for 'Allow HTML Snippet Insertion'.
For more information, click the following link http://blogs.adobe.com/contribute/2009/06/are_you_a_power_user_try_using.html
Hope this helps. Cheers.

HT201343 I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confuse

I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confused.

To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X

Actions which include Set Reference Pt via Transform Panel failing consistently during playback

The title pretty much says it all. I have two different Windows XP machines, both got upgraded to CS 6 (the x.0.0 release, the Release Notes for the x.0.1 don't directly address this, but if this topic pulls up blank, I may go that route... it requires running an approval gauntlet via IT, otherwise I'd already have done it).
Repeatable problem is this:
0. Create and select an object. Even a basic rectangle will do.
1. Creat a new Action.
2. Begin recording.
3. In the Transform Panel, specify a new Reference Point that isn't the lower right (if your machines are like mine, you will get a "double hit" of the same Action step, no matter how gently you click on the new Reference Point). I say "not the lower right" for a reason in a second.
4. Feel free to make a couple other numeric transforms in the Transform Panel. I tried adjusting Width and Height.
5. Stop recording.
6. Undo back to the original state (though I suppose it isn't necessary to deomnstrate the point)
7. Run the Action.
First thing, the Set Reference Point seems to be utterly ignored, *or* sometimes it sets to the lower right and stays stuck there. I made one Action that was just a series of moving the Reference Point around a rectangle clockwise. The Action failed after the first Set and then stayed locked on the lower right for no discernible reason.
In an attempt to revisit some old Actions that were working without fail under 5.5, I loaded those. For those imported Actions, every time playback hit a step calling for a "Transform Panel," it would return an error dialog "The object "Transform Panel" is not currently available."
What in the blue blazes is going on here? Needless to say, this is taking a wrecking ball to our dozen mission-critical Action Sets, which all rely upon setting transforms to fit particular spaces automatically, precisely and consistently, and which, I might add, worked fine under 5.5.
On the positive side, the bug where movement of objects by their X,Y coordinates via the Transform Panel during Playback seems to be fixed. So, I guess there's that.
Help?
P.S. Addendum: if anyone on CS6 (16.0.0 and/or 16.0.1) can at least run through the test case above and either confirm or deny that I am crazy to be witnessing this, that would be helpful, too.

I FIXED IT!!!
How? I made a simple Action that just recorded my changing the reference point around an object clockwise, saved the Action, then cracked it open in a text editor (Wordpad, in my case).
Most of the items aren't terribly useful (for instance, Adobe, why are dialog texts in machine code rather than human-readable strings? That's be darn handy), BUT at the end of each step of the Action (called Events), I noticed that there was a variable being set to "8" every time. Yes, there are 9 possible reference points, but you need to think like a programmer/computer here. Yep, the first point isn't "1," it's "0." So, counting left-to-right, top-to-bottom gives you...
0 = Top Left
1 = Top Middle
7 = Bottom Middle
8 = Bottom Right
So it isn't the playback that's at fault, it's THE ACTION RECORDER getting it wrong. I changed that last "8" variable to a "1" and brought it back into Illustrator and ta-da! My reference point gets accurately set at the Top Middle and proceeds from there! YAY! HAPPY DANCE!
PS Adobe, YOU'RE WELCOME.

When trying to get onto my email, the following statement comes uip: "We are sorry, but you will need to enable cookies and Javascript to use your Username with this site. I click "here" but nothing happens. How do I enable cookies amd Javascript?

Trying to get t my email, this comes up: We are sorry, but you will need to enable cookies and Javascript to use your Username with this site.
How do I do this?
George Szanto<br />
[email protected]

see similar question answered at https://support.mozilla.com/questions/836913
To be notified of updates to a question whether it is your problem or not simply click on the "Get email notifications" and follow directed choice. Only the original poster can mark as solved, so there should be a slight difference in choice as an original poster and where you latch onto another question. The notifications only apply to the specific question where entered.

I need to 'enable download pictures/graphics' in my Comcast email.

I get no images or graphics in my Comcast email. I need to 'enable download pictures/graphics' I believe to fix this. Text within a blank graphics box stated this. I'm using Firefox version 27. Windows XP. Comcast email server. Graphics quite showing in my email several months back all of a sudden. I've cleared the cache and cookies. I believe I tried resetting Firefox to default settings. I could try this again. Don't remember if I did this before or after email graphic problems. Comcast tech support could not help me. Thank you.

Cor-el, there are no links to the email images in Tools>Page Info>Media that I can see. When I right click the image placeholder and click Inspect Element, It shows line after line of what looks like code. No images loading are only a problem in my Comcast email. I've had three tech reps at Comcast try to solve it. None could. Websites load fine. Could the problem have something to do with my graphics card and driver? Thanks.

When I go to a Pages document, I can't get a cursor to enter info.

Why no cursor to enter info in Pages?

Pages creates two types of document: Word processing documents and Page layout documents.
Word processing documents include a default Text layer into which text can be entered directly.
Page layout documents do not contain a Text layer. Those created with either of the Blank Canvas templates contain nothing except an empty canvas onto which objects, including Text boxes, may be placed. To enter text on a Page layout document, you will first need to insert a Text box (or a Shape) using the Text button or the Shapes button in the Toolbar. Click inside the Text box, and you will see the insertion point and be able to enter txt from the keyboard or from the Clipboard.
Regards,
Barry

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's mom

Sami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot.

I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone I need to enable. Thanks.

Question
I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone and I think I need to enable. I can't log on to Citibank to pay my bills using Firefox or Safari for that matter. Citibank says cookies must be enabled to access their on-line bank. I wonder if this is the problem...cookies that is?

Yes, I found the cookies, and thanks for taking the time to help out. I called Citibank. They told me that they will not support Firefox or Safari for Mac because our user group is too small for them and the expense too high. The person that I spoke to said in the past, Firefox has worked with Citi, but that was just by accident. At the moment they have no plans to help Mac people using the latest OS log onto their website or enable programs like my Quicken or Mint.com to access. They don't work anymore either. I think all the problems happened after the last OS update.

I have a plug in called unity player 3.4 do I need it enabled, same thing with google update 1.3.21.69 on laptop running windows 7

I just bought my laptop & was checking add-on for updates all of the other plug ins updated, & I've installed all up to date, but not sure, I have no knowledge about if I even need to enable the- Unity Player 3.4.0.27242, ( I'm not a gamer) nor do I know what the Google update 1.3.21.69 is use for. Or can it be disabled as well?

For unity player you can see there:
http://en.wikipedia.org/wiki/Unity_%28game_engine%29
http://unity3d.com/webplayer/
i think you can disabled if you are not a gamer
For Google update look here:
http://forums.mozillazine.org/viewtopic.php?f=7&t=841905
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Need to enable Transform Panel to enter info.

Similar Messages

Maybe you are looking for