Need to exclude leading zeros from ACCOUNTS

Hi
I have certain accounts like this in BI - BT0500000181. i want to exclude the leading zeros in between the code and should display in BPC like BT05181. is there any way out to convert this.
I think we can use java script in conversion file for some data transformation.
Any advice plz

Hi,
We can use java scripts. However, I am not sure whether something like this can be achieved or not.

Similar Messages

How to remove leading zero from Material Number

Hello Everyone,
I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
Is there any setting in query desinger to handle this issure or in the backend.
Need your inputs.
Thanks,
Lasya.

Hi
you can use the function Module
CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
to test this go to SE37 --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
>display -
> F8
in the input give 000000456
and execute
the out put will be 456
for getting Zeros you can use
CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
Santosh
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM

How to remove leading zeros from a string

Hi,
I have a situation here where i need to remove the leading zeros from the incoming data.
i.e if 0009 then it should be taken as 9
   if 0230 it should be taken as 230
Regards,
Ashish

Hi ,
Write UDF to parse data .
                String dataVal="0230";
          int parseVal = Integer.parseInt(dataVal);
          System.out.println("parseVal is "+parseVal);
result.addValue(parseVal); or return parseVal;
Nanda

How to remove Leading zeros from MATNR "at Database Level"

Hi,
When we create a material in MM01 , we can either create material as Internal Material No. or External Material No. (By Explicitly entering a material No.)
Our requirement is that: When we create an Internal Material , there should NOT be any Leading Zeros in MATNR.
and for External Material No. , Leading Zeros Should be there. (In Database)
1) Now , we can create the No. Range for material in such a way that it will allow only AlphaNumeric entries for Internal Material , and Only Numeric Entries for External Material No.
This should slove the Purpose.
But According to the Client's requirement , Material No can be Numeric OR Alphanumeric for Internal As well as External Material No.
2) We can Add or Remove leading zeros from MATNR at application level. i.e. we can find some BADI / Enhancement where we will Use the Conversion FM (CONVERSION_EXIT_MATN1_OUTPUT or CONVERSION_EXIT_ALPHA_OUTPUT) and remove Leading Zeros from MATNR. But these changes will NOT reflect at Database Level , Because in MATNR Domain , there is a conversion Routine , That will Add Leading Zeros in MATNR While saving in the Database.
3) While Displaying the Material In SE11 , we can also set the "Display Format" as With leading Zeros OR Without Leading Zeros.
But we dont want to Just "Display" material with OR Without Leading Zeros. we want to actually create materials in that way.
What can we do , so that at Database Level our changes are Reflected.
Thanks and Regards,
Anand Gore
Edited by: anandgore on May 18, 2011 3:47 PM

That will Add Leading Zeros in MATNR While saving in the Database.
That is because you have it configured that way. You can configure the storage as you desire. The default is the behavior you are describing. You, or your functional analyst, need to review the documentation on the MM config settings for material master number storage.
Never use CONVERSION_EXIT_ALPHA_OUTPUT for material conversion. Also keep in mind that the MATN1 functions have their own BADI for extended formatting...

Removing leading zeros from a string value

Hi All,
i have a Requirement like , i need remove leading zeros from a string value,
like , 00Raj00Shekar==>Raj00shekar,
how can i do this ?
if it is only with the custom functions ,where can add the fuction in Jdeveloper and SOA Middle ware?
Thanks in Advance,
Raj

Hi Raj,
you can use below function to get the desired output in xsl.
<xsl:value-of select='translate(oraext:left-trim(translate(<inpString>,"0"," "))," ","0")'/>
HTH,
Regards,
Vikas Manchanda

Removing Leading zeros from query output.

Hello Experts,
Is it possible to remove leading zeros from the query output for a particular column?
I have a characteristics 'Reference Document' which has values like '000001386'. The users just need '1386' to be displayed and have asked us to remove the leading zeros.
Is there something that can be done for this at a query level? I can't modify the underlying InfoProvider because this requirement is just for one set of users, the other users need the document nmber in the original format.
Thanks
Arvind

Hi,
you can use ALPHA conversion option in the definition of that particular characteristic.
Try this code in a routine.,in query designer;
data a(9) value '000001386'.
SHIFT a LEFT DELETING LEADING '0'.
write:/ a.
Output will be : 1386
Or use this method also
data a(9) value '000001386'.
Call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
Exporting
input = a
Importing
output = a.
write a.
output:
1386
Regards
CSM Reddy

Removal of leading zero from &*BSIS-SGTXT&

Hi ,
*I need to remove the leading zero from my sacscript fileld &BSID-SGTXT&. When its &BSID-SGTXT& I can put &(Z)BSID-SGTXT&.
*Since i am using &BSID-SGTXT& insertion of Z before is not compressiving zero.
How to compress leading zero in &BSID-SGTXT&. case.*Thanks *

Hi,
Please try
&SYMBOL(Z)& Suppress leading zeros &SYMBOL(C)& Compress blank spaces
Hope it helps.
Regards
Hiren k.Chitalia

How to Use COLUMN NOPRINT - need to exclude one column from Select *

Dear Friends,
I need to exclude one column from a SELECT * query. Everytime the column data type is BLOB, I dont' want it to be part of my SELECT. After googling I found some info about NOPRINT but it doesn't seem to be working in my case. May be I am using it incorreclty.
COLUMN FILE_DESC NOPRINT
SELECT * FROM FILES;
Where FILE_DESC is of BLOB datatype.Can I use it in my SELECT or it has to be used in Dynamic SQL? Is there any other option to achieve this?
Thanks in advance.

Hi,
COLUMN FILE_DESC NOPRINT
affects all queries in the same SQL*Plus session (unless you cancel it with a COLUMN FILE_DESC PRINT command.) It doesn't matter if those queries are static or dynamic. As mentioned before, COLUMN is a SQL*Plus command. If you using a different front end, then it may have a different way to hide specific output columns.
Did you have a poroblem when you tried it? Post a complete test script that the people who want to help you can use to re-create the problem and test their ideas.
See the forum FAQ: https://forums.oracle.com/message/9362002

How to remove leading zeros from variable

hi,
   how to remove leading zeros from variable like it_vbap-matnr.
value in it_vbap-matnr is 000000000000000358
i want to remove leading zeros so that it become 358
regards
deepak

You can use Function Module <b>'CONVERSION_EXIT_MATN1_OUTPUT'</b>
This Function Module will eliminate leading Zeros.
For each MATNR Value read form DB Table,u can eliminate Leading zeros and then modify ur Internal table.
I think u will not get leading Zeros into utr Internal table when u read from VBAP.
Bcoz MATNR in VBAP itself have Conversion routine.
If u r getting leading zeros,U can use following Logic.
tables:
vbap.
data:
   t_vbap like standard table of vbap.
select matnr
from vbap
into corresponding fields of table t_vbap.
loop at t_vbap into vbap.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_OUTPUT'
      EXPORTING
        INPUT         = vbap-matnr
      IMPORTING
        OUTPUT        = vbap-matnr
modify t_vbap from vbap transporting matnr.
endloop.
Hope this will work.....

Conversion routine to remove leading zeros from nonnumeric values.

Hi,
Can anybody tell me any conversion routine while can remove leading zeros from a character value.
Eg :
input : asdfe
        output : 0000asdfe and vice versa
I tried with Alpha conversion routine but that is useful only with numeric values.
Please help.
Regards,
Deepti Jain.

Hi,
See the following program, and the same logic you can apply in Transfer Rules/Transformations. Take ABAPer help.
REPORT ZALPHA_INPUT.
DATA: ZI(18) TYPE C,
      ZO(12) TYPE C.
DATA: ZS(12) TYPE C,
      ZR(18) TYPE C.
      ZI = '000000099999889925'.
      ZS = '099999889925'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT         = ZI
   IMPORTING
     OUTPUT        = ZO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
    EXPORTING
      INPUT         = ZS
   IMPORTING
     OUTPUT        = ZR .
Write:/   ZI.
Write:/   ZO.
Write:/   ZS.
Write:/   ZR.
Thanks
Reddy

BAPI to remove leading zeros from the serial number

Hi All ,
plz can anybody suggest me the alternative BAPI for 'BAPI_SERVNOT_MODIFY_DATA ',whose function is to delete the leading zeros,from the serial number.
Thanks.

Perhaps instead of using a BAPI you can code it like this.
DATA:serial(10) TYPE n VALUE '0000340078',
pos TYPE i VALUE 1.
START-OF-SELECTION.
WHILE pos <= 10 AND serial+pos(1) = 0.
pos = pos + 1.
ENDWHILE.
REPLACE ALL OCCURRENCES OF '0' IN serial(pos) WITH space.
WRITE serial.

Remove leading Zeros from the mapped context node(Table)

HI,
I have he following requirement:
In the Leave approval application , in the Approver worklist we have the coloumn to display the resuqester's Perner.
The perner starts with leading zeros. We have to remove these leading zeros.
I have refer the following threads:
Removing leading zeros in a column
How to remove leading zeroes of string
and wiki document:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/java/remove%252bleading%252band%252btrailing%252bzeros%252bfrom%252ba%252bstring
but I am not able to create the calculated attribute in the Mapped Node( NWDS is not allowing indicating it is not allowed for mapped nodes.)
Any pointer how I can remove leading Zeros from existing column?
If I create the calculated attribute outside the mapped node then it is taking only the first value of the mapped node.
Please note we do not want to modify the RFC.
_vishal

Hi,
Thanks for inputs,
Now I created a test application where the original structure is as follows in the View Controller:
1) Context -> Z_Portal_Test_Input (mapped Node/folder) -> IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
note: this attribute Eid has the values (01, 02,03,04,05)
2)Context -> Z_Portal_Test_Input (mapped Node/folder) -> Output(mapped Node/folder) ->IT_Tab_Input(mapped Node/folder) -> Eid(Mapped attribute)
Now as per your suggestion I created another node like this
Context -> Z_Portal_Test_Input (mapped Node/folder) ->testnode(value node) ->testValue(value attribute)
testnode cardinality is 1..1 and singlton = false
In the Layout
The tablecell editor of one coloumn is mapped to text     Z_Portal_Test_Input.testnode.testvalue
It is expected that this will show the values like(1,2,3,4,5) but it is showing value(1,1,1,1,1)
The code of get method is:
public java.lang.String getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement element)
    //@@begin getTestnodeTestvalue(IPrivateTestpernerView.ITestnodeElement)
      String msg =wdContext.nodeZ_Portal_Test_Input().nodeOutput().nodeIt_Itab().currentIt_ItabElement().getEid();
        return removeLeadingZeroes(msg);
    //@@end
the functon removeLeadingZeroes(msg) is implemented as per the wiki link.
What wrong I am doing/ missing....
_vishal

Remove leading zeros from a string

Hi,
I have a string with some numeric value.
e.g.
String a = 54890001
I want to make it 10 digits long by padding zeros at the begining
Now a = 0054890001 ( this is for display purpose ) I know how to do it.
Now How can strip these leading zeros from this number to get back the actual number. The user sees this 10 digit number and he can change it to something like 0067490001. Now I want to strip these leading zeros.
and i shd get 67490001.
In other words, how to strip leading zeros from a string ?
Thanks for help
Vinod

I would try two things: First, just try a straightforward parsing of your String using the Integer.parseInt() method. This is only my first suggestion because the number could be interpreted as octals; only testing will really tell. Second, try a method like this:
public static String removeLeadingZeros(String str) {
    if (str == null) {
        return null;
    char[] chars = str.toCharArray();
    int index = 0;
    for (; index < str.length; index++) {
        if (chars[index] != '0') {
            break;
    return (index == 0) ? str : str.substring(index);
}Shaun

Remove Leading zeros from column

How can I remove leading zeros from a column?
The data looks like *00-04-071*
The output should display 4071

user10876532 wrote:
How can I remove leading zeros from a column?
The data looks like *00-04-071*
The output should display 4071try
select to_number(replace('00-04-071','-','')) from dual

Leading zeros from Adobe form web service data connection

I created a web service for BAPI_PRODORD_GET_DETAIL and used it as a data connection in an Adobe form. When executing the connection using request parameters of:
Number = [Production Order #]
OrderObjects.Operations = 'X'
no production orders are found.
I debugged and discovered the BAPI only found production orders when the Number importing parameter contained padded leading zeros. After searching the forums, I suspect (1) I have the wrong field type and / or pattern for the production order number input field or (2) SAP Note 1050826 may apply.
Does anyone have suggestions on which field types and patterns to use? I have tried each of Text, Numeric, and Decimal. When using Numeric, I set the data format to Float instead of Integer. I tried data patterns such as: num , the data displays with leading zeros but does not pass to the BAPI with them.
I was also thinking a Formcalc or Javascript may be the solution.
Livecycle version: 8.1.2
Component SAP_APPL: 603 (for SAP note relevancy)
Thank you,
--- Scott

Hello,
maybe it would be the fastest approach here to work with the value as a string and check the length of the "string" and if needed add some leading zeros. You may try some validations, so the value entered by the user is denied if not in the respective format.
For a smooth start with scripting start here:
http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf
http://help.adobe.com/en_US/livecycle/es/FormCalc.pdf
Regards, Otto

Need to exclude leading zeros from ACCOUNTS

Similar Messages

Maybe you are looking for