Need to execute bat file by GPO with admin rights
Hi all
I created a specific bat file that run regini.exe with specific parameters to set a specific permission in a specific registry key.
I can execute this bat file from GPO but I need that this bat runs with domain admins rights otherwise script not set the permission in user's registry key.
Have you any ideas?
Thanks
Chris
> Yes I tested this solution but it's not possible set permission to the
> key :-(
Which key are we talking about?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))
Similar Messages
-
Execute .bat file using cfexecute tag...
Hello,
I am trying to execute a batch file using cfexecute tag. This
batch file needs 1 command line arguement, which I am passing using
arguments
Text attribute.
When I run my batch file directly from command prompt, it
works perfectly. but while using cfexecute, it doesn't seem to do
anything.
Note:- I am trying to encrypt a txt file using GPG algorithm
in the batch file.
Thanks in advance!
ManjuHello,
you have probally worked this out but if any of this helps :)
I run an application that needs to print via dos command, so
my cfm page makes a batch file writes some arguments to it then
calls it with a cmd. the code is below if any of it helps im glad.
(creates name for my bat file)
<cfset BFname = '#namevariable#' & '.bat'>
(sets up the text I need in the bat file)
<cfset content = 'copy
"c:\inetpub\wwwroot\mct\picklist.txt"
\\MyPrintServer\ThePrinter'>
(writes the bat file with the text in the content var)
<cffile action="write"
file="c:\inetpub\wwwroot\mct\#BFname#" output="#content#">
(calls cmd to run the bat file)
<cfexecute name="c:\windows\system32\cmd.exe"
arguments="/c c:\inetpub\wwwroot\mct\#BFname#"
outputfile="c:\inetpub\wwwroot\mct\log_output.txt"
timeout="1"></cfexecute>
Regards Guy -
Executing *.bat file from PL/SQL
Is there anyway for Executing *.bat file from PL/SQL ?
ThanksTry here:
asktom.oracle.com/pls/ask/f?p=4950:8:15427268967155079552::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:952229840241 -
User with admin rights can't access files through the command prompt
I have a strange situation where I have 2 users both setup exactly the same with admin rights on a 2003 (32 bit) server through an AD group membership, but one can do everything as expected but the other can't.
The one that can't is trying to execute a program is a command prompt and keeps getting access denied or invalid directory when trying to cd into the folder. I double and tripled check the permissions and they are correct, this person should have
full admin. In fact I did a effective permissions through explorer and it states full rights. Along those lines this person can also access the folder in question through explorer just not a command prompt.
Has anyone seen this before ? and if so what can be done about it.
ThanksHi,
Can the user execute the program through explorer? In Windows Server 2003, the Users group does not have Read and Execute permissions to the command processor (Cmd.exe).
You could refer to the article below to resolve the issue:
"Access is denied" error message when you run a batch job on a Windows Server 2003-based computer
http://support.microsoft.com/kb/867466
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Firefox Silent updater will not work unless I launch Firefox.exe one time with Admin rights
I am building a Firefox 17.0.4 ESR package to use for my Enterprise. Everything is working great except for the updater piece. I am using the configuration.ini file during the install with the command MaintenanceService=true turned on, and a mozilla.cfg file with updates enabled, pref("app.update.enabled", true). I am running the install both manually, and through SCCM with Admin rights, including the maintenance service. After the install runs, I open Firefox as a limited user and go to Help->About, and it says Updates are available at www.firefox.com, and that the browser is set to the ESR release channel.
In all my troubleshooting, the only 2 sure ways I have found that make the auto updates work for a user were to run firefox.exe as an admin 1 time, or to install the base esr package as an admin after my install package. That will fix it for the logged in user only, but another user would run into the same issue. It appears that something is not installing correctly, but I cannot determine the cause.
My install command is:
Firefox Setup 17.0.3esr.exe /INI=%INST%\Configuration.iniIn my organization, we have removed Admin rights from all users, but use a product that can elevate any .exe with create a policy for to run with Admin rights. We have a policy set for updater.exe and it does work for future updates, just not this first update after install until Firefox itself is run as Admin for the first time. My thought is that when Firefox and the Maintenance service are installed with Admin rights through SCCM, the maintenance service should have inherited rights from that install. Forgive me if I am wrong in my conclusion.
-
Hello,
I have developed a COM-Addin for word 2013 by VS 2013 and installed it under the HKLM with Admin rights. Now from an non-admin account, ie Standard User I'm able to uncheck that addin from the COM-Addins dialog and remove it also. Previously I have done the
same thing for word 2007 addins and if a non-admin user tries to uncheck it the warning "The
connected state of Office Add-ins registered in HKEY_LOCAL_MACHINE cannot be changed" pops
up. But this is not happening for office 2013 apps(basically word, excel and powerpoint).
This is happening for all Add-Ins installed under HKLM.
How can a Standard User be restricted from unchecking and removing the Office Addins registered under HKEY_LOCAL_MACHINE with same warning "The
connected state of Office Add-ins registered in HKEY_LOCAL_MACHINE cannot be changed" in
a pop-up box?
Regards, SayanHi,
The behavior is changed since Office 2010. Office 2010 and Office 2013 allows a standard user to turn a per-machine add-in off by unchecking the add-in in the COM Add-ins dialog.
To restrict Standard User from not removing the COM Add-ins, we can try to add the add-in to
the Group Policy option: List of managed add-ins in the Office Group Policy template.
Word for example, the policy is under:
User Configuration\Administrative Templates\Microsoft Word 2013\Miscellaneous
To enable this policy setting, provide the following information for each add-in:
In "Value name", specify the programmatic identifier (ProgID) for COM add-ins, or specify the file name of Word add-ins.
To obtain the ProgID for an add-in, use Registry Editor on the client computer where the add-in is installed to locate key names under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Word\Addins.
To obtain the file name of an add-in, click the File menu in the application where the add-in is installed. Click Options, click Add-ins, and then use the Location column to determine the file name of the add-in.
In "Value," specify the value as follows:
To specify that an add-in is always enabled, type 1.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support -
Additional User with admin rights
Hi all,
i checked the documentation but i could not found a possibility to create an additional user with admin rights to access the Vibe Management Console.
Does anybody know if this is possible and how to do this?
Thanks in advance
AlexHi Willem,
thank you for the great post. It did the job very well.
Alex
>>> <[email protected]> schrieb am 1.8.2013 um 07:46 AM:
> arlorenz;2275156 Wrote:
>> Hi all,
>>
>> i checked the documentation but i could not found a possibility to
>> create an additional user with admin rights to access the Vibe
>> Management Console.
>> Does anybody know if this is possible and how to do this?
>>
>> Thanks in advance
>>
>> Alex
>
> Hey Alex,
>
> Yes, that's possible. It's somewhat a twofold/threefold process, as
> you have to give an accounts right to administer the zone, and then also
> have to give that account rights to the personal workspace root (to be
> able create/delete user accounts) and any workspaces that need to be
> administered.
>
> I always create an vibe-admins group (local group) that gets the rights
> to the zone and workspace roots. Then add the needed users to that
> group.
>
> Access for the zone can be set within the administration console:
> https://www.novell.com/documentation...ata/bk4saug.ht
> ml
>
> Then add the needed rights on the workspace roots, Global, personal &
> team workspaces.
>
>
> !Do note that admin is the only user that is not allowed to get
> blocked. Other admin users can be filtered out via ACL's.
>
>
> Cheers,
> Willem -
Install SCCM client remotely with admin rights
Hi,
I want to deploy SCCM 2012 R2 clients remotely via PowerShell script running on an admin computer with the following commands :
$Computers = Get-Content C:\Computers.txt
$Computers | % { Copy-Item -Path C:\Temp\ccmsetup.exe -Destination \\$_\C$\RemoteTemp\ }
Invoke-Command -ComputerName $Computers -ScriptBlock {\\$_\C$\RemoteTemp\ccmsetup.exe /mp:MP01}
When I run the PS script, the client is not installed on remote computers. When I run the ccmsetup via command line locally, there is a popup displaying if I want to allow the EXE execution. When I click on YES, the client is well installed. So I want to
know if there is a solution to do it from my PS script with admin right bypassing UAC on remote computers ?
Thanks.If that's really the road you want to take then this will probably help:
http://jeffwouters.nl/index.php/2011/11/having-some-fun-with-uac-and-powershell/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Execute bat file with cfexecute
Hello,
this is a newbie question but I'm stuck. I have a .bat that
runs fine through the command prompt but won't run with
<cfexecute>, it merely seems to read the .bat but not execute
it. The .bat reads:
java -classpath
".;C:\CFusionMX7\wwwroot\i-recall\javaClasses\GATE-3.1\bin\gate.jar"
AnnieAPI
When I run <cfexecute
name="C:\CFusionMX7\wwwroot\i-recall\javaClasses\GateClasspathRun.bat"
variable="myVar" timeout="100">
</cfexecute>
The output looks like this:
C:\CFusionMX7\runtime\bin>java -classpath
"C:\CFusionMX7\wwwroot\i-recall\javaClasses\GATE-3.1\bin\gate.jar"
AnnieAPI
It simply reads it and doesn't execute the java AnnieAPI
command. I didn't write this .bat file so maybe I need to add
something to make it run. Any help is appreciated.
-Kalen GSame thing, just without the classpath in the output:
C:\CFusionMX7\runtime\bin>java AnnieAPI
Even if I remove the class path and simply leave java
AnnieAPI it doesn't run. It should get an error message without the
classpath or something but I don't And the page loads so quickly
it's obvious that Coldfusion is just reading the code and not
executing it.
Thanks -
Is it possible to execute .bat file located in package ?
Hi,
in my application i execute a print.bat file using Runtime.exec(), i'd like to place this .bat in package, let's say com.me.testpackage. How is it possible to execute the batch file from that location?
thanksjschell wrote:
sabre150 wrote:
jschell wrote:
>Simple 'for' loops seem to work OK but still more research needed.
There is escaping in the for loops which is necessary in a bat file and not needed at the command line.
It seem to be that any command spanning more than one line fails. Fail? The example that gave shouldn't fail. It should simply run both echos.As I understand it, the command sequence
@echo off
goto XXX
echo out
:XXX
echo last
should just output 'last' and not 'out so if it prints both 'out' and 'last' then in my view it 'fails'. Am I missing something?
>
>>
Makes me even more pleased that I work mainly with Linux.Looking up syntax - what about getopts (bourne and korn)? You can also create 'functions', which can be defined later (if I recall correctly) in the script and called multiple times. I don't know how that would work streaming it in.I don't know about consequences of the streaming approach forward definitions in 'bourne' and 'korn' though I was not aware that 'bourne' allowed them. For 'bash' where forward definitions do not seem to be allowed (could I be mistaken in this?) then using Process process = Runtime.getRuntime().exec("bash", null, new File(System.getProperty("user.home")));the following very simple 'bash' script (which contains loops, if statements and functions but no goto or forward definitions) can be executed without problems - # Simple bash script
function sayHello {
echo "Hello" $1
sayHello "World" ;
for i in $( ls /tmp ); do
echo file - $i
done
for i in `seq 1 10`;
do
echo "seq" $i
done
i=0
while [ $i -lt 6 ]; do
if [ $i -eq 4 ]; then
echo "then" $i
else
echo "else" $i
fi
let i=i+1
done
i=12
until [ $i -lt 10 ]; do
echo "until" $i
let i-=1
doneIn the past, I have also published examples of how to run Perl scripts using the same basic approach. The heart of the examples is final String perlScript = "#!/bin/perl\n" +
"print \"PID $$\\n\";\n" +
"print \"UID $<\\n\";\n" +
"print \"EUID $>\\n\";\n" +
"print \"GID $(\\n\";\n" +
"print \"\\nProcessing the command line arguments\\n\";\n" +
"foreach (@ARGV) {\n" +
" $n = factorial($_);\n" +
" print \" $_! = $n\\n\";\n" +
"}\n" +
"print \"\\n\".'@INC'.\"\\n\";\n" +
"foreach (@INC) {\n" +
" print \" $_\\n\";\n" +
"}\n" +
"print \"\\n\".'%ENV'.\"\\n\";\n" +
"foreach (keys %ENV) {\n" +
" print \" $_==$ENV{$_}\\n\";\n" +
"}\n" +
"$x = theAnswerToTheUltimateQuestion();\n" +
"print \"\\nThe answer to the ultimate question is ... '$x'\\n\";\n" +
"sub theAnswerToTheUltimateQuestion()\n" +
"{\n" +
" return 3*2*7;\n" +
"}\n" +
"sub factorial()\n" +
"{\n" +
" my ($n) = @_;\n" +
" return ($n > 1) ? $n * factorial($n-1) : 1;\n" +
"}\n";
System.out.println(perlScript);
* The perl source can be from any InputStream. Here I use a
* ByteArrayInputStream just as a demonstration.
final InputStream perlSource = new ByteArrayInputStream(perlScript.getBytes());
* The '-' indicates that the Perl script comes from stdin. The "a","b","c" etc
* are the command line arguments passed to the Perl script.
final String[] command =
"perl", "-", "5", "6", "7", "8", "9", "10"
final Process process = Runtime.getRuntime().exec(command);piping the 'perlSource' stream to the process stdin.
This runs as expected on both Linux (FC9 and Ubuntu 8.04) and on Windows using Active Perl.
Please don't take my use of a String to hold the Perl script to mean that I in any way endorse this approach - I just wanted a simple means to create a self-contained example.
>
And the c shell has a goto also.One day I might find some time and investigate 'c' shell goto in this context - since I have not used csh for at least 8 years I am very rusty.
I can't say that the 'streaming' approach will work with all Linux shells but I can say that on Linux I have had no problem with Perl and Bash. If anyone needs to use the 'streaming' approach with another shell then it takes just a few minutes to setup a test harness. If any problems are found then people can always resort to the 'Plan B' approach.
I am still pleased I work mainly with Linux and Unix. -
How to execute .bat file within pl/sql block
Hi,
I want to execute a batch file (.bat) file withing a pl/sql procedure. Please guide me for it.
RegardsThere are several possible ways to make a call-out from a PL/SQL program to the OS on the database server (but not to the client computer).
You could use java or an external procedure (you'll need to code it in C) for example.
You might be able to make use of UTL_HTTP to talk HTTP to another server or UTL_TCP to talk TCP to another server.
What is it you are trying to do? -
Problem in executing bat files
hi all
I developed one console application which has two components;one utility componet and a main componet and both are developed as maven project.i successfully build the componets by successfully set the dependencies.
i got two jar components.
then i did the following things
1.Create one folder ,Say Application
2.create lib,resources,log folders under Application
* resources is for logconfiguration file and propertiesfile
* log folder is for log fles
* lib is the folder where i place my two jar files
3.create a .bat file by editing a text file with the following contents and give a .bat extension
java -cp
/lib/mainModule.jar;/lib/utilityModule.jar com.my.package.Starter
Problem:-i got the following message while i was trying to execute the bat file
"Failed to load Main-Class manifest attribute from /lib/mainModule.jar"
Do i need to do more configuration on that.....please help
mobiso you use bat, why you use -cp option?
you can write it as:
set classpath=%classpath%;/lib/mainModule.jar;/lib/utilityModule.jar
java com.my.package.Starter -
Hiding the command prompt when executing bat file
Hi,
I hava a bat file which contains following
java -jar MyJar.jar
When I execute the bat file, the jar file is executed. But a command prompt also opens along with it. I dont want to display the command prompt to the user. Is there any way to hide that command prompt ?
regards,
Jatin.Is your problem solved?
If not then
insted of creating a batch file create a form file in visual basic and write following code in it
shell "java -jar MyJar.jar"
Endand then create its exe file.
It will just launch your jar file and then exit. -
Problem executing .bat file from within Java class
I'm stumped: I have no problem executing a .bat file that sets classpaths and executes a Java jar, but when I try to execute other executables first and then the .jar, my application hangs and since the DOS box doesn't come up over my GUI, I can't see what's going on.
This works:
public void execute() throws Exception {
String s = "c:\\cs47auxs\\omnijar\\omni.bat";
Process p = Runtime.getRuntime().exec("\"" + s + "\"");
p.waitFor();
JOptionPane.showMessageDialog(frame,
"The Database Has Been Successfully Reloaded.",
"Information Message",
JOptionPane.INFORMATION_MESSAGE);
Here's the .bat 'omni.bat'
set JAVA_HOME=c:\j2sdk1.4.2_04\bin
%JAVA_HOME%\java -jar C:\CS47AUXS\OMNILOADJAR\OmniLoad.jar
This doesn't work:
public void execute() throws Exception {
String s = "c:\\cs47auxs\\omnijar\\jobomni.bat";
Process p = Runtime.getRuntime().exec("\"" + s + "\"");
p.waitFor();
JOptionPane.showMessageDialog(frame,
"The Database Has Been Successfully Reloaded.",
"Information Message",
JOptionPane.INFORMATION_MESSAGE);
Here's the .bat file 'jobomni.bat'
SET NETX_HOME=C:\CS47AUXS
SET COBOL_HOME=C:\CS47AUXS\OFFLINE
CD %NETX_HOME%
CALL SET-NETX.CMD
CD %COBOL_HOME%
SSBPPC10 JOBOMNI X
SET JH=C:\J2SDK1.4.2_04\BIN
SET OMNI_HOME=C:\CS47AUXS\OMNILOADJAR
CD %OMNI_HOME%
%JH%\java -jar omniload.jar
Can anyone shed some light here? Even when I execute the application from the command line the new DOS box doesn't become visible nor can I see any errors. If I could just get that visibility, I could probably figure out what is going wrong.Same problem with me as well.... Badly looking for a solution...
I predict the following:
- If your batch file has pretty less number of dos/shell commands then it gets executed fine with exec() and proc.waitFor();
- If you increase the number of dos/shell commands in the bat file then try executing it then it definately hangs at proc.waitFor();
Even "cmd.exe /C C:\\test.bat" hangs... if the commands are more...
Is this some sort of bug? or am i doing anything wrong? I tried searching for solution on the net and search forums... but couldnt find a solution for the same.. not sure where i missed, what i missed...
Incase some one finds a solution.. do post it here...
Message was edited by:
amadas -
Hi..
how can we execute a bat file in file..
like batch file containg notepad .exe
now executing the batch file from flex and notepad opens i want this
thanksWell guys thanks for your response..
i got an api named MERAPI that do this work..it has code written in java..and acts as a bridge between java and air
http://www.merapiproject.net/index.php?option=com_content&view=article&id=47&Itemid=64&lim itstart=3
now what i found here was that for executing the exe from flex it provides a function named systemExecute(array as parameter);
I tried to implement this but was stuck somewhere with java..then got a help from the google groups..
http://groups.google.com/group/merapi-project/browse_thread/thread/34db7ed7f0187b29?pli=1
where the person saysin order to do this you have to run the bootstrap file..but how to do that
Please help
Maybe you are looking for
-
Problem in the package or classpath
Hello every body I want to add a module at "jhove" which is open source: http://hul.harvard.edu/jhove/index.html When I launch jhove like this: ./jhove -k file.pdf, it shows me more informations about this pdf. I want that it re-knows me anathor type
-
Hi, I have rented a few movies through iTunes. The first handful all downloaded in about 20mins, they were all between 1.0-1.5g. Recently the same size movies have started taking ~2hrs?? My connection and speed have not changed, everything else I dow
-
Can't access Internet via Ethernet port of 'n' Express in 'Extend' mode
I just purchased the new Airport Express (AXp) n version for the purpose of extending my Airport Extreme (AXt) n version wireless network so that I can connect my old MacBook Pro (MBP) 17" core duo, running Mac OS X 10.5.2, to the AXp via an Ethernet
-
Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standa
-
Engage 2008: Line Graph, can't start 2nd series @ different X value
Using Xcelsius Engage 2008 Created line chart w/ 2 series 2nd series does not start at the same X value as series 1. How do I generate the second series so the initial part of my 2nd series line does not show all 0s? Thank you Nancy Griffin