Need to find all clips to which a certain filter has been applied

Other than going through the entire timeline and opening each of my clips in the viewer, is there a way to determine all the clips on the timeline to which a certain filter has been applied?
Thanks,
John Link

Not really John, at least not that I can think of off the top of my head ... but you can make the task easier by changing your Playhead Sync mode to Open (View menu > Playhead Sync > Open) that way you can zip through the timeline and as the playhead moves from clip to clip it will automatically open the clip under the playhead into the Viewer window. If you set the Viewer window so that it is showing the Filters tab then you can pretty easily see at a glance whether a specific filter is applied on a specific clip.
Or, if there are no other filters applied, then you can turn on the timeline's Clip Keyframe overlays (toggle on/off with Option T) ... wherever you see a green line displayed then you know that a filter is applied.

Similar Messages

A command to analyze all clips onto which a warp stabilizer has been added?

Ahoi gente!
We are working on a 90 minute piece -and getting through the project manager took time and nerves. Clips are still missing in the collected project created by the project manager...
Anyway - the real question is: Is there a way to filter the clips in the timeline to only show the ones with a warp stabilizer on it? Or a command to analyze them all?
Otherwise I have to look through all of the clips and click analyze again....
Recommendations? Thanks a LOT!

Hm, I did learn some lessons in all this - but not using an NLE to manage the files...?
I thought next time we should give unique names to files instead of building up a structure of folders on the external hds, work with proxies, dividing the project in more sub projects more often to increase performance etc.
But how would you get rid of not used files instead of using the project manager? Manually?

Need to find All Custom Reports which are based on SAP standard reports

Hi Specialists,
I would like to find out all the customized reports which are a copy of SAP standard reports in the client's system.
For Eg. RPCP11G0 is the SAP standard report which has been customized & it's code has been re-written into a Custom report i.e. ZGBPPYMP001_P11D.
I would like to know all such occurences in the system.
Steps already done:
1) Tried searching with RPR_ABAP_SOURCE_SCAN & RS_ABAP_SOURCE_SCAN.
Please suggest .
Thanks
Abhinav.

it's only possible with an tool-program
when your developers have not change the line with the REPORT-command.
e.g.
standard-report is RAGITT01
copy is ZC_RAGITT01 or sth like this
but report line is unchanged in copy: "REPORT RAGITT01 MESSAGE-ID AB..."
solution:
select all reports from TRDIR/TADIR from your Z/Y-device classes
and analyse the reports with
read report ZC_RAGITT01 into wa.
and use find for searching 'report-command'.
and check whether the result of that finding is an standard abap
hope that helps
Andreas

Help needed in accessing the url from which a swf file has been loaded

Hi All,
Can anyone help me out in finding the url of the swf file
from which it has been loaded? The purpose of the url is, I am
loading some flv files using relative path. I just want to achieve
the same by appending the relative path to the parent swf url from
where the parent was loaded.
I am a newbie to AS3, So please don t mind if this is a silly
question.
Can anyone help me on this.
Thanks in advance,
Prabakaran Srinivasan.

Hi,
Thanks for the reply. I think the option you gave is only
applicable when the AS3 class comes in the DisplayObject hierarchy.
I want this information in an AS3 class which does not extend any
of the Sprite or its super class hierarchy. Can you let me know the
possibility of fetching the value from such a class which i
specified???
Thanks,
Prabakaran Srinivasan.

Need to find out the queries which did not executed in 2014

Hi All,
I need to find out the queries which start from YY and did not executed in 2014, earlier we used to find out by looking into the technical content cube 0TCT_C02 but now its giving dump as number of queries increases. I tried to find out using table RSZCOMPDIR but not able to trace it exactly. Please suggest some alternative solution to find out the queries which did not execute in 2014 so that we can delete it.
Thanks,
Asim.

Hi,
RSDDSTAT_OLAP : This is the table which contains query execution details
CALDAY field in that table gives you query execution date
OBJNAM gives the query name
As you said RSZCOMPDIR gives list of all queries. doing a lookup between these tables will identify the queris which are not executed in particular period.
-Sriram

Finding all clips with a specific effect applied? (CS6)

I'm just wrapping up a long (2-hour) multi-cam edit and applied the warp stabilizer effect on several clips in the project. As I was skimming the video marking chapters, I discovered some of the clips with that effect had the blue "Analyzing (Step 1)" bar across the clip. Not sure why it didn't complete the analysis and stabilization on those clips originally, but I reran the analysis/stabilization effect and those clips are clean now.
However, I'm worried I might have missed other instances of the "blue bar" in my skimming. Is there a way to search and find all clips in my timeline that I applied the warp stabilizer effect to so I can check them all?
Thanks.
roorider

Not exactly.
Any clips with an effect applied have a purple line through them. But you'll have to click the clip to see which effects are used.

How can i find all included pictures which are not in a album? (only in the Library)

How can i find all included pictures which are not in a album? (only in the Library)

Hi there,
I'm afraid I don't quite understand your question. All images are in your Library and only those you specifically select from that Library would be in an Album. What platform are you using? Revel Mac, Elements, web browser, etc?
Here is a link with some helpful information:
FAQ: File Basics: How do I Upload, Download, Share, and Delete files in Revel?
Thank you,
Glenyse

Satellite Pro L40 PSL43E I need to find all the XP drivers

I need to find all the XP Drivers for this particular notebook. Any ideas where i can find them. on this site i only get the "how to downgrade" Pease Help ASAP

If such drivers are available then you will be able to find such drivers on the Toshiba European driver page.
If the drivers are not available on the Toshiba European driver page, then the drivers were not released.
But Ive got one hint; I found some XP drivers for Sat L40 series. Some series supports the same devices and therefore the drivers should run too.
Check some single XP drivers from different L40 series and maybe it would run.
Ciao

Find all Z programs which are being modified in last month

hii all,
I want to find all Z programs which are being modified in last months.Is this possible??.is there any standard or z-program which can give me the detail of all Z-program which are modified.
It is possible if i get last month Request but suppose if there are more than 100 request per month then it is not possible to go through each individual Request and find Z-programs.
Waiting for ur reply.
<removed_by_moderator> ... read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]!
Thaking You.
Edited by: Julius Bussche on Jul 17, 2008 7:16 PM

Hello
REPORT ZCHPROG.
TABLES: D010SINF.
DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: PROGTXT1(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA:
   BEGIN OF MT OCCURS 0,
PROG LIKE D010SINF-PROG,
EDTX LIKE D010SINF-EDTX,
R3STATE LIKE D010SINF-R3STATE,
UNAM LIKE D010SINF-UNAM,
CNAM LIKE D010SINF-CNAM,
UDAT LIKE D010SINF-UDAT,
UTIME LIKE D010SINF-UTIME,
END OF MT,
N(4),
PROG(20) TYPE C,
MIN(10) TYPE C.
RANGES: UDAT1 FOR D010SINF-UDAT.
RANGES: UTIME1 FOR D010SINF-UTIME.
SELECT-OPTIONS: PROG1 FOR D010SINF-PROG,      "
                UNAM1 FOR D010SINF-UNAM,      "
                CNAM1 FOR D010SINF-CNAM.      "
PARAMETERS DEN(4) TYPE C DEFAULT '1'.
PARAMETERS SEC(5) TYPE C DEFAULT '30'.
PARAMETERS DOP AS CHECKBOX DEFAULT ' '.
START-OF-SELECTION.
IF DOP NE SPACE.
MIN = SEC * 60.
      UTIME1-SIGN = 'I'.
      UTIME1-OPTION = 'BT'.
      UTIME1-LOW = SY-UZEIT - MIN.
      UTIME1-HIGH = SY-UZEIT.
   APPEND UTIME1.
ENDIF.
      UDAT1-SIGN = 'I'.
      UDAT1-OPTION = 'BT'.
      UDAT1-LOW = SY-DATUM - DEN.
      UDAT1-HIGH = SY-DATUM.
   APPEND UDAT1.
SELECT PROG UNAM UDAT UTIME R3STATE EDTX CNAM
INTO (MT-PROG, MT-UNAM, MT-UDAT, MT-UTIME, MT-R3STATE, MT-EDTX,MT-CNAM )
         FROM D010SINF WHERE PROG IN PROG1
                                     AND UDAT IN UDAT1
                                     AND UTIME IN UTIME1
                                     AND CNAM IN CNAM1
                                     AND UNAM IN UNAM1.
APPEND MT.
ENDSELECT.
N = 1.
WRITE: / 'from', UDAT1-LOW, 'to', UDAT1-HIGH.
SORT MT BY UNAM UDAT UTIME.
LOOP AT MT.
WRITE: / MT-CNAM,MT-PROG,MT-UNAM,MT-UDAT, MT-UTIME,
MT-R3STATE, MT-EDTX.
N = N + 1.
ENDLOOP.
WRITE: / N.

I need to find all XML elements and add a line break to the text of each of them

I need to find all XML elements and add a line break to the text of each of them.
Is this possible with a script?

I need to go from this ...
to this...
but looking for the XML elements (not paragraphs) and then adding text ...
Thanks for your attention !!!

WRH$** tables, Need to know by which user SQL Query has been executed

Hi,
From the AWR data (WRH$) tables , I need to know how many sql code is using some specific indexes, I found that information by using the mentioned code. but I need to find out by which user this code has been executed ( not the PARSING_SCHEMA_NAME). Can someone please help me, how can I get that info?
select a.operation,a.OBJECT_OWNER,a.OBJECT_NAME ,dbms_lob.substr(b.SQL_TEXT,4000,1) from WRH$_SQL_PLAN a,WRH$_SQLTEXT b
where a.operation='INDEX' and a.SNAP_ID=b.SNAP_ID and a.SQL_ID=b.SQL_ID and a.OBJECT_NAME in (
'I_CUSTORDER_STAT_CHG_DTM',
'I_LINE_ITEM_STAT_CHG_DTM',
'I_SHOPCART_MODIFIEDDTM',
'I_VISITOR_CART_UPDATED_DTM',
'R_ORDER_LOG_EVENT_DTM',
'I_LI_STATUS_HISTORY_EVENT_DTM',
'I_SHOPPING_CART_CREATEDDTM',
'I_VISITOR_CART_CREATED_DTM',
'I_LINE_ITEM_CREATED_DTM_FTM')

872903 wrote:
Hi,
From the AWR data (WRH$) tables , I need to know how many sql code is using some specific indexes, I found that information by using the mentioned code. but I need to find out by which user this code has been executed ( not the PARSING_SCHEMA_NAME). Can someone please help me, how can I get that info?
select a.operation,a.OBJECT_OWNER,a.OBJECT_NAME ,dbms_lob.substr(b.SQL_TEXT,4000,1) from WRH$_SQL_PLAN a,WRH$_SQLTEXT b
where a.operation='INDEX' and a.SNAP_ID=b.SNAP_ID and a.SQL_ID=b.SQL_ID and a.OBJECT_NAME in (
'I_CUSTORDER_STAT_CHG_DTM',
'I_LINE_ITEM_STAT_CHG_DTM',
'I_SHOPCART_MODIFIEDDTM',
'I_VISITOR_CART_UPDATED_DTM',
'R_ORDER_LOG_EVENT_DTM',
'I_LI_STATUS_HISTORY_EVENT_DTM',
'I_SHOPPING_CART_CREATEDDTM',
'I_VISITOR_CART_CREATED_DTM',
'I_LINE_ITEM_CREATED_DTM_FTM')consider enabling AUDIT SELECT FROM TABLE upon which INDEX is based.

InCopy workflow in InDesign: Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?

The situation:
We are working with the InCopy feature (checking in and checking out ICML files).
The problem:
I might have saved a document with an ICML file still checked out.
The question:
Is there a way to find out which document was saved with the ICML file still checked out?
or in other words:
Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?
Thanks for any help!

Hello Sumit Singh,
thank you for your answer and your reasonable recommendation. Unfortunately, this only works when the ICML content is used in one INDD file. In our case, we use ICML content in multiple docs (various manuals with the same safety instructions, warranties, adresses etc.).
So, is there a way to trace back where an ICML has been used?
Is it possible to find out in which document the ICML is still checked out?

How to find out when a folder or a file has been renamed?

I need to find out when a folder and some files have been renamed.
This happened when Mac OS X was 10.6 (Leopard Snow), now the Max OS X is Lion.
I use standard HFS+ filesystem format.
In Lion apparently there is a file property "Date Added" that change if a file is renamed, but the same property seems to be unused (e.g. -/-) before Lion.
I have Time Machine backups that help me to know that rename happened within a certain week, but I was looking for something more accurate (at least day accuracy).
If file system metadata can't help, I'm wondering if there is some log that track the first time spotlight indexed a specific file.
Thank you
/Andrea

Maybe you could keep tabs of the file size. If the file size grows (which it will do each time the writing process flushes that files output buffer), then the file was written to.
What I'd like to know is if there is some way to monitor the entire drive for changes and respond to stuff like that. I know that the Win32 API provides services that monitor the file system for changes, but I don't know if other OS's do... or if Java provides an interface to those features.

Which are the quires has been build by using this ODS.

Hi,
Please some one tell me how to find out The any ODS has been using in which are the queries .
Or which are the quires has been build by using this ODS.
Thanks,
GAL

Hi GAL BI,
You check in the meta data repository, you can get the list of queries build on that particular DSO.
The table RSRREPDIR (directory of all queries) - it will display the queries developed on the top of IC and MP.
If you want to know particular query where it is used click on where used list it will display .
Regards
KP

I have music stored and it wont let me transfer them over all i get is your apple id has been disabled, i have re set my pasword and this has not solved the problem

i had a iphone in 2010, i purchased music which is still stored on my original apple id, but when i try to transfer the music ,and download apps all it says is your apple id has been disabled, i have tried re setting a new pass word but this has not solved the problem can any one help please

Contact itunes support

Need to find all clips to which a certain filter has been applied

Similar Messages

Maybe you are looking for