Need to find excel template for project manager to track a project
need an informationon excel templates for tracking projects
You just need to install Traditional DAQ language support for Visual Basic, and you'll get the header files. I've attached it below for your convenience. (had to rename it to a txt file to be able to attach it here).
Joe
Attachments:
wdaq_vb.txt 19 KB
Similar Messages
-
Cannot find CFML template for custom tag SELECTDATE
Hi,
I am not a ColdFusion developer and just moved a site from one server to another. That site is developed by someone else not me and I just moved the site to ColdFusion server. Site is working fine except a few pages where I am getting this error:
Cannot find CFML template for custom tag SELECTDATE
I read a little bit about custom tags. These are files that needs to be placed in a certain folder from where ColdFusion reads them.
So that means I will need to ask the developer who developed this site to provide me with this custom tag file, which when I will place in appropriate folder, this page will start working? And without that file I cannot do anything about it?
ThanksAs Dan says, they're just CFM files. Usually one can identify them as follows:
* they're in the same directory as a file calling <cf_somefilename[...]>, wherein there is a somefilename.cfm is the name of the file
* they're in one of the directories set as custom tag directories (in CFAdmin, or Application.cfc)
* they have references to "thistag" or the attributes scope in them (although the latter can produce false positives on Fusebox sites)
By the sounds of it, your issue is - like I said before - you haven't got your custom tag dirs set up in CFAdmin (or in Application.cfc, which I didn't mention before). Investigate that.
Adam -
Oracle VM and Oracle VM Template for Enterprise Manager Cloud Control 12c M
Hello!
After installation of *"Oracle VM 3.1.1 Media Pack v1 for x86_64 (64 bit)"* to bare hardware
can I install Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack ?
Is it the wrong plan ?
What to do if I need to set VLAN №1 ? (according note of installer I have to choose number between 2 and 4094 )
Thanks and regards,
Pavel
Edited by: Pavel on Jul 30, 2012 5:01 AMYes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent. -
Find the Employees for whom Manager is not available
Hi
I wish to find all the Find the Employees for whom Manager is not available?
Can anyone Pls throw some light how I can?
Regards,
SreeramHi
Get all the Positions without "A002 - Reports" Relationship from table HRP1001 (excluding A002 from input screen).
After finding the positions, get ee no.s for those positions from table PA0001.
Hope this helps.
Best Regards
Reddy -
Cannot find CFML template for custom tag
Why am I getting this error when my code looks like this?
Cannot find CFML template for custom tag UPSPrice.
ColdFusion attempted looking in the tree of installed custom tags but did not find a custom tag with this name. If you are using per-applica
<Cfif NOT form.shipzip IS "">
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.shipzip#" WEIGHT="#getshipweight.totwei#">
<cfelse>
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.zip#" WEIGHT="#getshipweight.totwei#">
</cfif>UPSPrice.cfm file:
<!---
NAME:
CF_UPSPrice
DESCRIPTION:
Cold Fusion custom tag obtain UPS shipping costs from ups.com.
ATTRIBUTES:
CALLTAG - (optional) Electronic or basic call tag issued, valid options
are NONE BASIC or ELECTRONIC, defaults to NONE.
COD - (optional) Package is being sent C.O.D., valid options are YES
and NO, defaults to NO.
FROM - (required) Source (ship from) postal code.
HANDLING - (optional) Requires special handling (eg. - any article that
is not fully encased in an outside shipping container,
or any package that exceeds 60 inches in length).
HAZARD - (optional) Package contains hazardous material, valid options are YES
and NO, defaults to NO.
HEIGHT - (optional) Height (in inches) of oversized package.
LENGTH - (optional) Length (in inches) of oversized package.
OVERSIZED - (optional) Package is oversized, valid options are YES and NO,
defaults to NO.
RESPONSE - (optional) Delivery confirmation service, valid options are
NONE BASIC SIGNATURE ALTERNATE or ALL, defaults to
NONE.
SATDELIV - (optional) Saturday delivery, valid options are YES and NO,
defaults to NO.
SATPICKUP - (optional) Saturday pickup, valid options are YES and NO,
defaults to NO.
SERVICE - (required) UPS Service ID, valid service IDs are:
1DM - Next Day Air Early AM
1DML - Next Day Air Early AM Letter
1DA - Next Day Air
1DAL - Next Day Air Letter
1DP - Next Day Air Saver
1DPL - Next Day Air Saver Letter
2DM - 2nd Day Air A.M.
2DA - 2nd Day Air
2DML - 2nd Day Air A.M. Letter
2DAL - 2nd Day Air Letter
3DS - 3 Day Select
GNDCOM - Ground Commercial
GNDRES - Ground Residential
SHIPNOT1 - (optional) First ship notification, valid options are NONE
DOMESTIC or INTERNATIONAL, defaults to NONE.
SHIPNOT2 - (optional) Second ship notification, valid options are NONE
DOMESTIC or INTERNATIONAL, defaults to NONE.
TOCOUNTRY - (optional) Destination country code, defaults to US if not
specified. Visit the UPS site for a complete list of
valid two letter country codes.
TO - (required) Destination (ship to) postal code.
VALUE - (optional) Declared value for carrier liability, carrier assumes
$100 by default.
VERBCONF - (optional) Verbal confirmation of delivery, valid options are YES
and NO, defaults to NO.
WEIGHT - (required) Weight (in pounds) of package, fractions may be used.
WIDTH - (optional) Width (in inches) of oversized package.
NOTES:
This tag submits a shipping cost request to UPS for processing, and returns
price and shipping information. CF_UPSPrice sets the following variables that
you may use within your template after the call to CF_UPSPrice:
UPS_BaseCharge - Base shipping charge.
UPS_Charge - Total charge.
UPS_Error - Error message, if there was one.
UPS_ErrorCode - Error code, if there was one.
UPS_FromCountry - Source country code.
UPS_FromPostal - Source postal code.
UPS_GuaranteedBy - Guranteed delivery time.
UPS_OptionalCharge - Total of optional charges.
UPS_Service - UPS service ID.
UPS_Success - YES if request was successful, NO if not.
UPS_ToCountry - Destination country code.
UPS_ToPostal - Destination postal code.
UPS_ToZone - Destination zone.
UPS_Weight - Billed weight.
USAGE:
To use just call <CF_UPSPrice> from within your Cold Fusion template,
passing at least the required attributes TO FROM SERVICE and WEIGHT.
EXAMPLES:
Obtain price for next day package from NY to CA:
<CF_UPSPrice SERVICE="1DA" FROM="11213" TO="90046" WEIGHT="1.5">
<CFOUTPUT>Cost is #DollarFormat(UPS_Charge)#</CFOUTPUT>
Sending a oversized package C.O.D. via second day air:
<CF_UPSPrice SERVICE="2DA" FROM="11213" TO="90046"
WEIGHT="1.5" HEIGHT="13" WIDTH="12" LENGTH="20" COD="Yes">
Using form fields:
<CF_UPSPrice SERVICE="#service#" FROM="#from#" TO="#to#" WEIGHT="#weight#">
AUTHOR:
Ben Forta ([email protected]) 10/14/97
With help from Dave Beckstrom ([email protected])
--->
<!--- Initialize variables --->
<CFSET proceed = "Yes">
<CFSET error_message = "">
<!--- Get UPS service --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.service")>
<CFSET product = ATTRIBUTES.service>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "SERVICE must be specified!">
</CFIF>
</CFIF>
<!--- Get destination postal code --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.to")>
<CFSET destPostal = ATTRIBUTES.to>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "TO postal code must be specified!">
</CFIF>
</CFIF>
<!--- Get source postal code --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.from")>
<CFSET origPostal = ATTRIBUTES.from>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "FROM postal code must be specified!">
</CFIF>
</CFIF>
<!--- Get weight --->
<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.weight")>
<CFSET weight = ATTRIBUTES.weight>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "WEIGHT postal code must be specified!">
</CFIF>
</CFIF>
<!--- If all okay, process other options --->
<CFIF proceed>
<!--- Get destination country --->
<CFSET destCountry = "US">
<CFIF IsDefined("ATTRIBUTES.tocountry")>
<CFSET destCountry = ATTRIBUTES.tocountry>
</CFIF>
<!--- Get oversized --->
<CFSET oversized = "0">
<CFIF IsDefined("ATTRIBUTES.oversized")>
<CFIF ATTRIBUTES.oversized>
<CFSET oversized = "1">
</CFIF>
</CFIF>
<!--- Get COD --->
<CFSET cod = "0">
<CFIF IsDefined("ATTRIBUTES.cod")>
<CFIF ATTRIBUTES.cod>
<CFSET cod = "1">
</CFIF>
</CFIF>
<!--- Get hazard --->
<CFSET hazard = "0">
<CFIF IsDefined("ATTRIBUTES.hazard")>
<CFIF ATTRIBUTES.hazard>
<CFSET hazard = "1">
</CFIF>
</CFIF>
<!--- Get handling --->
<CFSET handling = "0">
<CFIF IsDefined("ATTRIBUTES.handling")>
<CFIF ATTRIBUTES.handling>
<CFSET handling = "1">
</CFIF>
</CFIF>
<!--- Get calltag --->
<CFSET calltag = "0">
<CFIF IsDefined("ATTRIBUTES.calltag")>
<CFIF ATTRIBUTES.calltag IS "BASIC">
<CFSET calltag = "1">
<CFELSEIF ATTRIBUTES.calltag IS "ELECTRONIC">
<CFSET calltag = "2">
</CFIF>
</CFIF>
<!--- Get Saturday delivery --->
<CFSET saturdaydelivery = "0">
<CFIF IsDefined("ATTRIBUTES.satdeliv")>
<CFIF ATTRIBUTES.satdeliv>
<CFSET saturdaydelivery = "1">
</CFIF>
</CFIF>
<!--- Get Saturday pickup --->
<CFSET saturdaypickup = "0">
<CFIF IsDefined("ATTRIBUTES.satpickup")>
<CFIF ATTRIBUTES.satpickup>
<CFSET saturdaypickup = "1">
</CFIF>
</CFIF>
<!--- Get response --->
<CFSET response = "0">
<CFIF IsDefined("ATTRIBUTES.response")>
<CFIF ATTRIBUTES.response IS "BASIC">
<CFSET response = "1">
<CFELSEIF ATTRIBUTES.response IS "SIGNATURE">
<CFSET response = "2">
<CFELSEIF ATTRIBUTES.response IS "ALTERNATE">
<CFSET response = "3">
<CFELSEIF ATTRIBUTES.response IS "ALL">
<CFSET response = "4">
</CFIF>
</CFIF>
<!--- Get vcd --->
<CFSET vcd = "0">
<CFIF IsDefined("ATTRIBUTES.verbconf")>
<CFIF ATTRIBUTES.verbconf>
<CFSET vcd = "1">
</CFIF>
</CFIF>
<!--- Get first ship notify --->
<CFSET firstshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot1")>
<CFIF ATTRIBUTES.shipnot1 IS "DOMESTIC">
<CFSET firstshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot1 IS "INTERNATIONAL">
<CFSET firstshipnotify = "2">
</CFIF>
</CFIF>
<!--- Get second ship notify --->
<CFSET secondshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot2")>
<CFIF ATTRIBUTES.shipnot2 IS "DOMESTIC">
<CFSET secondshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot2 IS "INTERNATIONAL">
<CFSET secondshipnotify = "2">
</CFIF>
</CFIF>
</CFIF> <!--- End process params --->
<!--- If have all params, process request --->
<CFIF proceed>
<CFHTTP
URL="http://www.ups.com/using/services/rave/qcostcgi.cgi"
METHOD="POST"
>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="accept_UPS_license_agreement" VALUE="yes">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="10_action" VALUE="3">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="13_product" VALUE="#product#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="15_origPostal" VALUE="#origPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="19_destPostal" VALUE="#destPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="22_destCountry" VALUE="#destCountry#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="23_weight" VALUE="#weight#">
<CFIF IsDefined("ATTRIBUTES.value")><CFHTTPPARAM TYPE="FORMFIELD" NAME="24_value" VALUE="#ATTRIBUTES.value#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.length")><CFHTTPPARAM TYPE="FORMFIELD" NAME="25_length" VALUE="#ATTRIBUTES.length#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.width")><CFHTTPPARAM TYPE="FORMFIELD" NAME="26_width" VALUE="#ATTRIBUTES.width#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.height")><CFHTTPPARAM TYPE="FORMFIELD" NAME="27_height" VALUE="#ATTRIBUTES.height#"></CFIF>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="29_oversized" VALUE="#oversized#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="30_cod" VALUE="#cod#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="33_hazard" VALUE="#hazard#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="34_handling" VALUE="#handling#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="35_calltag" VALUE="#calltag#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="37_saturdaydelivery" VALUE="#saturdaydelivery#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="38_saturdaypickup" VALUE="#saturdaypickup#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="39_response" VALUE="#response#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="43_vcd" VALUE="#vcd#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="44_firstshipnotify" VALUE="#firstshipnotify#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="45_secondshipnotify" VALUE="#firstshipnotify#">
</CFHTTP>
<!--- Check if succeeded --->
<CFIF ListFirst(CFHTTP.FileContent, "%") IS "UPSOnLine3">
<!--- Success, set variables --->
<CFSET CALLER.UPS_Success = "Yes">
<CFSET CALLER.UPS_Service = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_FromPostal = ListGetAt(CFHTTP.FileContent, 3, "%")>
<CFSET CALLER.UPS_FromCountry = ListGetAt(CFHTTP.FileContent, 4, "%")>
<CFSET CALLER.UPS_ToPostal = ListGetAt(CFHTTP.FileContent, 5, "%")>
<CFSET CALLER.UPS_ToCountry = ListGetAt(CFHTTP.FileContent, 6, "%")>
<CFSET CALLER.UPS_ToZone = ListGetAt(CFHTTP.FileContent, 7, "%")>
<CFSET CALLER.UPS_Weight = ListGetAt(CFHTTP.FileContent, 8, "%")>
<CFSET CALLER.UPS_BaseCharge = ListGetAt(CFHTTP.FileContent, 9, "%")>
<CFSET CALLER.UPS_OptionalCharge = ListGetAt(CFHTTP.FileContent, 10, "%")>
<CFSET CALLER.UPS_Charge = ListGetAt(CFHTTP.FileContent, 11, "%")>
<CFSET CALLER.UPS_GuaranteedBy = ListGetAt(CFHTTP.FileContent, 12, "%")>
<CFSET CALLER.UPS_Error = "">
<CFSET CALLER.UPS_ErrorCode = "">
<CFELSE>
<!--- Failed, set variables and error message --->
<CFSET CALLER.UPS_Success = "No">
<CFSET CALLER.UPS_Service = "">
<CFSET CALLER.UPS_FromPostal = "">
<CFSET CALLER.UPS_FromCountry = "">
<CFSET CALLER.UPS_ToPostal = "">
<CFSET CALLER.UPS_ToCountry = "">
<CFSET CALLER.UPS_ToZone = "">
<CFSET CALLER.UPS_Weight = "">
<CFSET CALLER.UPS_BaseCharge = "">
<CFSET CALLER.UPS_OptionalCharge = "">
<CFSET CALLER.UPS_Charge = "">
<CFSET CALLER.UPS_GuaranteedBy = "">
<CFSET CALLER.UPS_Error = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_ErrorCode = ListGetAt(CFHTTP.FileContent, 3, "%")>
</CFIF>
<CFELSE>
<!--- Failed, display error message, and abort --->
<CFOUTPUT><H1>Error: #error_message#</H1></CFOUTPUT>
<CFABORT>
</CFIF> -
i need to find the download for ACR 7.3 to use my nikon d600 raw files. i have cs5 running on macbook pro with mountain lion OS.
Hi,
Unfortunatly the 7.x series of camera raw plugin is not compatible with photoshop cs5.
You could download the 7.4 DNG Converter and convert your d600 files to dng copies which then photoshop cs5 will open.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5568 -
Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1
Hello
I download Oracle VM Template for Enterprise Manager Cloud Control 12c Media Pack v1
I was checking the structure and I found this
[oracle@em12c bin]$ cd /u01
[oracle@em12c u01]$ ls
app lost+found OracleHomes oracle-template.sh scripts
[oracle@em12c u01]$ cd OracleHomes/
[oracle@em12c OracleHomes]$ ls
checkpoints db11g Middleware
[oracle@em12c OracleHomes]$ pwd
/u01/OracleHomes
[oracle@em12c OracleHomes]$ cd db11g/
[oracle@em12c db11g]$ ls
admin cfgtoollogs checkpoints diag fast_recovery_area oradata product
[oracle@em12c db11g]$ cd ..
[oracle@em12c OracleHomes]$ cd Middleware/
[oracle@em12c Middleware]$ ls
[oracle@em12c Middleware]$
The Database has all binaries but Middleware is empty
Same body knows about this issue.
RegardsYes, you can install Oracle VM Manager, create a server pool with the one parent Oracle VM server in it, and then deploy the Oracle VM template in the pool. Once EM VM is up and running, you can register the same Oracle VM Manager with EM, to manage the pool.
In general, it is not recommended that you use the OVM server backend directly. But for bootstrapping the EM environment, you can also try the following:
Download the OVM Template on the Oracle VM server. From the OVM server terminal itself you can do "xm create" to spin a new virtual machine using the Oracle VM teamplate. Once the VM comes up, VNC into the VM and configure the EM OMS and agent. -
Need to find a BAPI for the below requirement
Hi All,
Need to find a BAPI for the below requirement.
We are assigning roles to users using SU01 T-Code and we are in the process of automating this and since we need a BAPI which can do this. Apart from assigning roles to users, SU01 T-code is doing many functionalities, but if we can get a BAPI which can perform assigning roles to users will suffice the requirement.
Thanks in advance,
Srilakshmi.Hi SreeLakshmi
see the list of BAPIs given below.
1065 Business Object Employee
BAPI_JOBROLE_CLONE Create a User Role in Another System By Copying
BAPI_BUPA_ROLES_GET SAP BP, BAPI: Determine All Roles
BAPI_BUPA_ROLE_ADD SAP BP, BAPI: Add Role
BAPI_BUPA_ROLE_EXISTENCE_CHECK SAP BP, BAPI: Check Existence of Role
BAPI_BUPA_SET_ROLE SAP BP: Set Object Part / Roles
BAPI_GET_EVENTTYPE_FOR_ROLE Determine Business Event Types Using Standard Role
BAPI_EMPLOYEET_CHANGEPASSWORD Change employee password
BAPI_EMPLOYEET_CHECKPASSWORD Check employee password
BAPI_EMPLOYEET_CREATE_PW_REG Create entry for employee password
BAPI_EMPLOYEET_DELETE_PW_REG Delete entry for employee password
BAPI_EMPLOYEET_DEQUEUE Unlock employee
BAPI_EMPLOYEET_ENQUEUE Lock employee
BAPI_EMPLOYEET_GET_PW_REG Read entry for employee password
BAPI_EMPLOYEET_INITPASSWORD Initialize employee password
Reward if helpful
Regards
Lakshman -
Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this
you can link
OOH.invoice_to_org_id=CUST.cust_account_id -- invoice customer
OOH.sold_to_org_id=CUST.cust_account_id -- sold to customer
OOH.ship_to_org_id=CUST.cust_account_id -- ship to customer -
Create an excel template for a report and open it always in that template
Hi,
I've a question. I have a report in BI Answers. I would export it in BI Publisher and create for it an excel template which contains any text and a macro. Then I would associate report to the template so that when i open report in BI Publisher, it appears in my template document and i can apply macro.
It's possible?
All regards
GiancarloWith a new account, you'll need to rebuy the games.
Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want. But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account. This only disconnects the device from that account, no data is lost on icloud. Then enter the account ID that you want to use.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/ -
Help needed in Finding Download location for Sun One Portal 7
Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AMtry edelivery.oracle.com under sun products.
-
I need help in finding my IDUD for my iPad2 to be able to change my password for a game TouchPet Dogs. I have forgotten the password and the support people say I need to prove my ownership by submitting the IDUD. I haven't been asked for it before and I've checked all the instructions and can't get it to work.
Please help because I am hooked on this game and my virtual dog ":Theodore". LOL!Check this link out:
http://support.apple.com/kb/HT4061 -
Need info on BI content for "Hedge Management"
Hii Guys,
Can anybody help me in finding right BI contents for Hedge Management (Transaction banking)?
I can see some hedge related chars and key figures in 0CFM_DELTA_POSITIONS but no records are coming for those fields.
Am i looking at the right data source ?
Regards,
Ashu.
Edited by: Ashu Gupta on Mar 9, 2010 11:27 AMHi Martin,
I have already checked that but I am unable to get the desired information.
Thanks for your help.
Regards,
Ashu. -
I need a sample excel data for practicing Dashboards
Hi Experts ,
I am new to SAP BO Dashboards. i need sample excel data for practicing and designing a dash boards . kindly help me to get sample excel files from any where .Please suggest me where i can get sample excel files.
Regards
AbhiHi,
open the samples in the dashboard which come with source data as excel.or search on google you will get the dashboard files with sample excel data.or try to create own sample data and use in dashboard for learning.
Amit -
Need to find user exit for Auto TO creation
Dear SAP WM experts
I need to filter the TR getting converted into TO automatically
I can see, in configuration, that an exit is suggested for the same:
This configuration refers to OMKZ transaction, package LVSC
When I search using the same in SMOD, I do not get any entries
Any help would be appreciated!
Thanks
Yogesh.Hi Yogesh!
For "Automatic TO creation (background processing)", the following user exits are available:
MWMTOAU1 Selection of requirements for automatic creation of orders.
MWMTOAU2 Reference number assignment.
MWMTOAU3 Selection of posting change notices for automatic creation of transfer orders.
See Develop User Exits for Warehouse Management - Warehouse Management - SAP Library
My guess is, that the MWMTOAU1 user exit is the one you are looking for.
The SAP documentation says:
"With this user exit, you can select transfer requirements for the
automatic TO creation according to your own criteria by means of report
RLAUTA10."
Best Regards!
Tim Lutz
Maybe you are looking for
-
Since with the new update on 6-8-10 my firefox starts up and opens 3 tabs. reg mozilla google page, the themes page, and a download helper add on main page. I change me homepage and change me theme but when I close firefox it never saves the theme an
-
Calling LDB (logical Database) into ALV output
h1.Dear Experts, h3.I have called LDB AFI in my Z program. h3.My requirement is in program i have to call LDB and output it in ALV display. h3.But in output only one entry get displayed . h3.Here is my code...... REPORT ZLDB_PROGRAM1
-
Problem with Managing Subscriptions (URL)
The problem consists of which I cannot create the sindicador, entrance the URL of the subscriber and the respective user, but at the time of Get Catalogue sends the following message: Error: Error en la conexión con el sindicador (No ICE server) I ho
-
Oracle Express install and use
Hi I am having some problems after the installation I can not get the "go to database home page" to load, Ikeep getting an error any help would be appreciated. Thanks - Rich http://127.0.0.1:8080/apex Internet Explorer cannot display the webpage Most
-
Imported photos not showing thumbnails
I'm brand spankin' new to iMovie and can't seem to get my photo thumbnails to show. I want to drag and drop folders into iMovie but when I do, all I get is a generic icon and no thumbnail of the image., They do show up when I preload them into iPhoto