Need to find impact of Vertex O series upgrade on ECC and changes required?

Hello experts,
My client is upgrading Vertex series to O from Q.
As part of Q series, additional fields such street will be used to identify correct tax jurisdiction code in system.
Also, zip code used will be 9 digits (zip+4) instead of 5 digits.
We need to correct existing master data and open transactions in system with new jurisdiction code along with supporting new data in system.
Below are the questions:
1. What changes are required in ECC side to support new vertex series in interface etc?
2. How can we achieve integration of vertex O series with new master and transnational data getting created in system to have right TXJCD value?
3. What all possible solutions are available to correct master data and transnational data in system with correct TXJCD value?
Any pointers to experience with Vertex will be rewarded.
Thank you,
Gouri.

Hi,
> 1. is there any dependency for the remaining systems in the landscape (SRM 5.0 SPS15, NW 7.0 SPS18, PI 7.1 SPS8, >SOLMAN EHP01 SPS22)?
As such there is no dependency between component you specified but SAP always says to be on latest patches. As far as solution manager is concerned you should have minimum support pack level Solman 7.0 SP17 but anyway you are more than that.
> 2. we are using AIX Version 5.3 and "DB2 v9.5.0.2", does it support ECC 6.0 EHP04 or do I need to upgrade?..
It is fine with your upgrade.
> 3. Java version for NW 7.0 is as follows:
> java version "1.4.2"
> Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
> Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20080122 (SR10) (JIT enabled: jitc))
> Does it support my requirement or any upgrade is required?
>
Java version is also fine.
Thanks
Sunny

Similar Messages

Is there a way to find out who keeps signing onto my apple ID and changing my password?

Is there a way to find out who keeps signing onto my apple ID and changing my password?
Every so often I get an email saying my password has been changed (when I don't change it). Is there anyway to find out an IP address, or a phone number or something of who keeps signing into my account? It's really annoying.

Change your password, and do not tell anyone the new password.

I need to find out how to contact upeer management to try and resolve an issue before I open a complaint with the Attorney Generals Office as well as the Better Business Bureau and social media.

I have been with Verizon for 15 years. I have a family share plan with 2 smart phones a standard phone and a jetpack for wireless access. I pay for insurance on the 2 smartphones. Approximately a year ago I made a payment arrangement to continue service on my account even though I had some business difficulties. I was told that while the arrangement was in place I could not make any changes to my account. However, since then I have had the following issues and when I try and contact Verizon to try and resolve them I am place on eternal hold or disconnected.
Issue #1: My daughter lost her phone in June 2014. (The contract on this phone was up in 2013) I have been told that I cannot replace the phone even though I pay the insurance premium of $9.95 a month. I have been billed for it and have also been charged $54.87 for the monthly service as well. The phone has not made or received a call since June 4, 2014 yet I have been charged $274.38 I just was able to have the service suspended at the store today, 11/29/2014
Issue #2 My phone has intermittent flaws, locking up and reuring rests, dropping calls, failing to receive calls etc along with horrible battery life. I went into the local verizon store and they ordered me a refurbished replacement phone which was subsequently sent to me. When I received it I took it to the store to have them assist me in setting it up properly. I was told that I should NOT set it up but send it back due to some physical damage present on my old phone that would most likely result in a $150 charge...it was recommended that I just upgrade my phones as they were all out of contract and that would be the best solution. I asked the manager if that would be possible due to the "terms" on my account and she said "it would not be a problem". I was interested in an Iphone 6 which was not in stock so I sent the replacement phone back and left, to wait for the phone to become available.
Issue #3 I had a JetPack that was recently stolen from my car. I stopped in to ask what to do about it (it is no longer under contract either) They suspended the service and recomended I wait until I upgraded my other phones and then get a new Jet Pack. I just received noticed that they were going to continue billing me for it this week, even though it has been out of contract for several months??????
I recently went to Best Buy to take advantage of their Black Friday deals and was told that based on the status of my account I was ineligible for any upgrades. We called Verizon from the Best Buy and they told me that I needed to address my account status (I just made the scheduled payment on the 23rd of Nov) either with Financial Services or go to a Corporate Store. I went to the store and was told there was nothing that could be done at that level, I would need to talk to financial services (which was closed)
So, I am extremely frustrated and upset with this whole situation and wanted to make one more attempt to resolve it with Verizon before I make a full blown complaint to the Attorney Generals Office, the Better Business Bureau as well as post this incredibly BAD customer service story on social media. I hope that I hear from someone ASAP as this is critical that I get things resolved immediately. I can be reached at [removed].
Personal information removed as required by Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Complain to the Attorney General about what? There is nothing in your story worth any such complaint. They will tell you the same.
First you have payment difficulty so credit and the Edge program are not available to you. You have to be credit worthy to get any upgrade, unless you can pay full price for all those new devices.
Can you?
You are trying to get new contract plans, but since you are having paying on time and in full issues you will not get extended credit from any carrier.
What I would do is go and port out to Boost or Virgin Mobile where you pay a reduced cost for each device and get unlimited everything for $40 to $50 a month, it is pre pay so if you don't pay you get cut off.
Verizon although with the best coverage is also the highest priced.
Good Luck

Need to Find a Very Responsive Mouse for Use w/ MP and Photoshop

I have a Logitech mouse that came with my Logitech keyboard for Mac and the Kensington Studio Mouse - both wireless. But they don't work that well with Photoshop CS2 especially because the software for the Kensington doesn't work with Intel Macs and I haven't found an update for it.
So, is there a very responsive wireless Mouse with software that will work with an Intel MP?
Thanks.
Ashley
MacPro 2.66 ghz., Macbook Pro, Macbook, Powerbook G4, PowerMac G5 Dual Core Mac OS X (10.4.8)

I certianly can't complain about the Logitech MX-1000 I'm using.
For mice I shy away from Bluetooth versions as the response is rather pathetic. There was a wired mouse that I saw someone recommend (I think it was Guy Mancuso) which seems to be an extremely goo performer although for the life of me I can't recally whay it was called or where it were from.
By the way, have you tried configuring the Mac OS X or LCC software? A bit of configuration can go a long way in getting the response you want.

Cannot find daqmx control task.vi after upgrading computer, OS and LabVIEW

Hello,
I have recently upgraded both my computer, OS and my LabVIEW version and I am having some issues.
My old system was:
LabVIEW 8.6 Professional Development System running on Windows XP SP3 (Dell Desktop computer)
My new system is:
LabVIEW 2014 SP1 Professional Development System running on Windows 8.1 Pro (MS Surface Pro computer)
I did a clean install of the LV 2014 which went smoothly. I then copied my old projects from the old machine to the new.
The simpler projects load without problem.
Some of the bigger project begin loading but hang on "Find the VI Named "DAQmx Control Task.vi" which does not seems to exist on the new computer.
There are several other DAQmx VIs that the project loader wants and do not appear to exist on the computer also.
I'm guess this could be because of the new OS, new LabView version, or because the new PC is a "tablet", or some combination of those?
Any ideas?
adTHANKSvance,
Bob

Hi bob,
when the old PC could load these VIs without complaining abut missing DAQmx functions it had DAQmx installed. Point.
Start the DeviceDriver DVD and install DAQmx.
Hint: Whenever you want to replicate your LabVIEW installation on a different computer you should check the "Software" section in MAX. It will list all needed parts/toolkits/drivers you have installed!

Need Help Pasting Key Frames from one still image to others, and Changing the duration of multiple still images.

I'm working on a stop motion project, and I have at least a thousand still images to work with.
I have adjusted several Key Frame settings on the 1st still image in my project, such as
Brightness
Cropping
Scale
Position
I now want to apply these exact settings to hundreds of still images at a time that make up one scene in the project (but not all still images in the entire project).. Is there a way to paste or easily transfer them?
Also, there are scenes I'm working on in which I want to change the image duration of hundreds of photos at once, but not change to duration of all images in the project, is this possible?
I've looked at several different web-links, but none of them have what I'm looking for. If you can please help me, I'd be willing to send you $10 through paypal. Knowledge is power; the solution to these problems would save me hours of time. If you don't fully understand my questions I can send you a pictures or a video, pointing out my needs.

Stan,
Thanks again for your input.
When the project is created, I don't recall seeing the preference settings until after the project opens the first time. In that case if certain media was imported into the project panel but not in the sequence, after the duration was changed, it would be necessary to remove the media from the project panel then re-import again. If there is a workaround to this please let me know. It also doesn't appear that creating a new sequence would prevent the re-importing. Could you confirm?
Thanks for the link on automating to sequence--I remember that from CS4.
The application of identical effects to media on the timeline in a sequence was something I had learned back in CS3 or maybe earlier CS4 where the effected, in this case a transition between images was applied then copied then using the paste or (Control V) command, applied to all other stills. That worked fine but with lots of images, it ends up being a lot of "point and clicks" since the CTI must be moved to each transition insertion point before the paste is applied.
I actually thought that I had seen someone select the remainder of the images in the sequence then apply the paste command but I was never able to make that work. Have you heard of such a short-cut?
Much thanks again!!

Find out which component on the UI is listening and changing to the click event?

Hello Forum,
Is there a way in flex to know which component is taking the click event which is being bubbled to the topLevelApplication. I'm clicking it and some container in the parent hierarchy is invalidating/refreshing the screen on click, so the child ficker's on click.

You need to put traces or alerts for each container till topLevelApplication, in order to know which is flickering the click...
Hope you got my point!!!
If this post answers your question or helps, please kindly mark it as such.

Need sql query to find out same item is used in open po and closed po

Hi Experts,
I have an requirement is that, i need to find out the item is used in open po and closed po.
example: A is the item is used in closed PO and Open PO.
i need to write down the scripts how many same items is used in open po and closed po.
if any sql script is there please share.
Please let us know if any concerns.
Thanks
bmn

Hi
Please try below query
select
distinct c.segment1
from
po_lines_all a,
po_line_locations_all b,
mtl_system_items_b c
where
a.po_line_id= b.po_line_id
and a.item_id=c.inventory_item_id
and b.closed_code='OPEN'
and a.item_id in ( select
item_id
from
po_lines_all d,
po_line_locations_all e,
mtl_system_items_b f
where
d.po_line_id= e.po_line_id
and d.item_id=f.inventory_item_id
and e.closed_code in ('CLOSED','FINALLY CLOSED','CLOSED FOR INVOICE','CLOSED FOR RECEIVING'));

Need to find all Virtual Comports with VID 403 and PID 6001

   I program in AutoIT. In a nutshell I need to find the Comport Number
(not parsed from the FriendlyName and will explain) for all Virtual Serial Ports
having VID 403 and PID 6001. It is a FTDI Virtual Serial Port.
   I was using the WMI call to Win32_PnPEntity and excluding ports not having
DeviceID "FTDIBUS\VID_0403+PID_6001". The $oItem.name would than yield something
like "USB Serial Port (COM17)". This is the Device Manage description. I could then
parse out the "COM17" and start communicatin with that port via RS232. The problem....
COM17 is the FriendlyName and the actual port was 25. Yes that is correct.
Device Manager shows "USB Serial Port (COM17)" butif you right click on it and
go to properties the actual port number is 25. I verified it by using putty and indeed
it was COM25. So the "FriendlyName" does reflect the true Comport Number.
   I found a little utility by uwe-sieber ComPortMan which comes with a little
utility called listports.exe. Here is the output:
PortName          : COM25
KernelName      : \Device\VCP0
DeviceID           : FTDIBUS\VID_0403+PID_6001+A901R735A\0000
ParentDeviceID  : USB\VID_0403&PID_6001\A901R735
DriverKeyName : {4D36E978-E325-11CE-BFC1-08002BE10318}\0088
FriendlyName    : USB Serial Port (COM17)
   As you can see the true Comport is 25 yet the firendly name is "USB Serial Port (COM17)".
So... I need to find a way to retrieve the actual "PortName" and not parse the "FriendlyName".
As mentioned the WMI call to Win32_PnPEntity returns the FriendlyName. A WMI call to
Win32_SerialPort wont work with Virtial ComPorts. I am at a loss. I know it can be done
because the listports utility does it. I have no idea where to start at this point. Help!

Quote from:
http://stackoverflow.com/questions/4061345/how-to-get-the-actual-com-port-number-with-setupdigetdeviceregistryproperty
You can use SetupDiOpenDevRegKey to
open the device's registry and query the "PortName" value; this will give you back something like "COM4". There are a few more ways
to query COM ports.
Best Regards,
Please remember to mark the replies as answers if they help

HT4759 I NEED TO FIND MY IPOD BUT I DON'T HAVE THE ICLOUD UPDATE , BUT I HAVE THE IPOD ON "FIND IPOD TOUCH" ?

iCloud won't let me sign in unless i update my iCloud System? i need to find my iPod it's very important too me and my familia. Any Ideas ?

Why can't you update iCloud?

Possible bug in inDesign CS5 with find and change

This could be a problem with my script or it may be a bug, not sure.
The script is used for finding a double space in a fragment of text and changing it to single space.
It works only once when it is executed.
To make it work again you have to close and reopen inDesign.
Here's the code:
app.findTextPreferences.findWhat = " ";
app.changeTextPreferences.changeTo = " ";
app.documents[0].changeText();

This one worked, Harbs also works but I think I'll go the unicode grep route for find and change on this one.
I like the use of the positive lookbehind GREP character. (?<=)
thank you

Need to find professional income tax preparation software, capable of handling 1065, 1120, 1041, 990, etc. preferably PPR compatible with Mac's OS

Need to find pro tax prep software compatible w/Macs. My software maker, Drake, does not have Mac version. I've checked Pro-Series (no) and maybe 1 other. I don't want to spend Lacert kind of $$ (neither do the majority of longtime Lacert users apparently). Obviously, no Turbo Tax, Tax Cut or any other commercial, deduction & crdit missing commercial software. They would ned to have the ability to 1) convert a few years of Drake to their program, 2) Covert files created on PC to files that 10 OS could use. Also, would like them to have reasonable PPR program, free efile, free unlimited states, capable of 1040, 1065, 1120, & (S), 1041, 990. Built in tax knowledge base. I'd be eternally indebted to you if you found sometghing as intuitive and value oriented as Drake but for OS 10. BEGINNING TO THINK APPLE bends over backwords for artistic tools but not so much business tools. Too bad, I've had a few tax returns that have bordered on art.
I will likely need to add Parallels & Windows 7 OS, preferably 64-bit to this Macbook Air. If so, I do not think I have sufficient memory or storage so would like to download & install onto NFTS (sp?) formatted 1TB HD. I do not know if hard drives, USB hubs, Optical drives etc. that work w/ Windows (as long as you choose correctly btwn SATA & IDE) will work on MacBook Air. Help greatly appreciated. So if you happen to know any pro tax prep software ompatible w/ OS 10 and/or, you could give me some info on what characteristics peripherals would need to have to use on MacBook (I'm hoping that most are inrterchanheable but my hoping ain't gonna make it so. OR if you know any great deals on Parallel-I saw some promos but not from reliable places. If I could find on Bradsdeals or Coupon Cabin I'd feel safe. I've seen an Apple ad for a bundle of software w/ some other decent parts (Snagit) . I'd love to find a promo that applies to the bundle and download all 9programs for $9.99 (right). Too many questions, sorry for any protocol violations. As you might have noticed, a keyboard is high on my agenda- I hate laptop keyboards though Apple's seems better than most. I also hate using scroll pads. Much rather have mouse. Real challenge is to find Bluetooth OS 10 keybrd that has numeric keypad. I wonder if the financial dept. @ apple uses keyboards w/ no numeric keypad, saw one that started at $99. I spent all the $$ I have on a MacBook, none leftover for overpriced peripherals, esp. w/ 2 kidfs going off to college in Sept.
Thanks for allowing me to whine & ramble. Feel free to call me on any breach of protocol as I am 1st time poster.
Thanks for your time and consideration, I HOPE I'M CORRECT IN MY GUT FEELING THAT I've joined the forces for good by switching. Too many PCs ruined by malware.
Bill S

Bill I've also run into a very similar problem, I own many Macs but I've had a PC for Tax Stuff. My PC broke and I refused to buy another one so I began to search for an alternative. Window's Emulators have given me so much trouble with my Tax Software.
However, I've since found out that Intuit has a cloud based tax solution that works with a MAC because it's all done online. Which means you'll need a reliable internet connection whenever you want to prepare a client's return.
It's suppose to support all of the major returns (1040, 1041, 1065, 1120, 1120S and 990)
I've yet to use this solution, but it's the best thing that I've been able to find so far. This is what I'll be using this upcoming Tax Season.
So I figured that it would be worth mentioning. Good Luck!
http://accountants.intuit.com/tax/online/?s_cid=SEM&s_ev1=SEM_TOE_Brand_Lower-ke yword_proline_tax_online

Need to understand impact on workflows during upgrade from EBP 3.0 to SRM 5

Hello experts,
Greetings to all and a Happy New Year!!
I am new to the workflow concept, though i have a fair idea of EBP.
We are using EBP 3.0, classic scenario. Very soon, we would be upgrading from EBP 3.0 to SRM 5.0. I have a few questions which i need to knw before I take up the upgrade part:
1) The impact on the worflows like Shopping cart approval, purchase contract approval etc when we upgrade from EBP 3.5 to SRM 5.0...
2) Does EBP have their own release strategies or are the release strategies defined in R/3 and applied to the shopping cart when it is ordered in EBP? As in classic scenario, POs are created in R/3, then how does the appoval process happen?
3) What are the necessary things, if any, that I should make sure of before upgrading?
4) Does all workflows also get upgraded or is there any tool to upgrade the workflow?
I am not clear with the approval concept in EBP. I know there are workflows that get triggered when a shopping cart is ordered but the approval process in this workflow is something which i want to understand. Please forward me a document, if possible, or a link will also do.
Please let me know the necessary details.
Thanks in advance.
Regards,
Ayush

Hi Ayush,
Most workflows will be the same, but if you have modifications on these workflows' then i'd suggest reverting back to the standards for the upgrade.
Im not quite sure what you mean about the release strategy. What can be done though, is creating Purchase Requisitions in the R/3 and pass them to the SRM system. From here PO's can be created and the approval process will take place in accordance with your workflow rules in tcode: swb_cond.
Before upgrading, try to have the system as clean as possible. When i say clean, i mean make sure that users are consistent, SC's, PO's etc arent left hanging. Try to avoid carrying documents over to the new system. I'd suggest archiving anything you can too.
I don't have any documents to give you but the basic process and transactions are as follows:
SWB_COND: Your workflow start conditions. Which WF's are on/off (defined by green/red light)
SWI6: This will let you examine a document and its relevant WF by its object id. (SC No, PO No etc..
SWUD: Allows for Consistency checks on your workflow and will find any inconsistencies which are occuring. (Use Test Environment and WF Tech Name i.e 14500015)
SWDD: The workflow builder, will let you build, activate, create new version and modify the worklows in your system.
Approval itself is simply the chain of approval which a workflow is defined to follow. You need your managers to approve/reject and the conditions for which Managers should be called for approval. Its works from Possible Approvers for workitems and Excluded Approvers for workitems.
Understanding the WF log is the most essential thing of all. The understanding of BADI is quite important too.
Hope this info helps you. Check help.sap.com cause everything is documented there too!
Cheers
Will

Need to Find A Laptop That Lets Me Play Sims 3 With Ease

I will be going off to college soon and I will need something to help me pass time between studying, homework, socializing, and class. My favorite game ever is Sims 3! I love the game since I was in grammar school. The thing is I could never find a laptop that successfully let me play. When I got my first laptop I wanted it to play sims 3 right away, but I didn't do any research. So the game kept lagging and what not. I definitely do not want to make that same mistake again. I will have enough money to buy a laptop that will let me play Sims 3 WITH Sims 3 Generations (I hope to get for christmas). So does anyone have an idea of what laptop that can meet my requirements?

The Sims 3 is not very demanding... so if you run across a laptop with a dedicated video chip you will probably be okay. This is a very generic question as you will get a generic answer. Just find a laptop with a Nvidia chip for video as an example as opposed to "Intel HD Graphics". Get a mid-range or higher rated chip as well. Using the Nvidia 500 series as an example: the 510M would barely be pulling its own weight. 550M Would probably run The Sims 3 more than fine with everything maxed. And 580M+ would be for if you were serious about mobile gaming and wanted higher setting in more demanding games. AMD also has graphics chips with the same concept (They are not bad but I am not going into a lot of detail). Keep in mind these consume more power and will decrease battery life. You can also look into if the laptop can switch inbetween video chips to save on power consumption when you are not playing games.

Satellite Pro L40 PSL43E I need to find all the XP drivers

I need to find all the XP Drivers for this particular notebook. Any ideas where i can find them. on this site i only get the "how to downgrade" Pease Help ASAP

If such drivers are available then you will be able to find such drivers on the Toshiba European driver page.
If the drivers are not available on the Toshiba European driver page, then the drivers were not released.
But Ive got one hint; I found some XP drivers for Sat L40 series. Some series supports the same devices and therefore the drivers should run too.
Check some single XP drivers from different L40 series and maybe it would run.
Ciao

Need to find impact of Vertex O series upgrade on ECC and changes required?

Similar Messages

Maybe you are looking for