NEED TO FIND MP4 IMPORT AND EXPORT PLUGINS FOR PREMIERE 6.0

DOES ANYBODY KNOW WHERE TO GET
SUCH ITEMS FOR THIS DINOSAUR?
ALSO WOULD LIKE TO FIND OPEN SOURCE ITEMS FOR PREMIERE 6.0
DO THEY EXIST?
WOULD LIKE TO FIND MJPEG PLUGINS AND FX OR OTHER EXPORT FORMAT PLUGINS, OR ?
THANKS FOR THE HELP WES

Wes,
I could be wrong, but IIRC, it was not until PrPro 2.0 that H.264 was added. Check me out on this.
Pr/PrPro uses installed CODEC's. There are three popular H.264 CODEC's, Apple's, Lead's and MainConcept's. Some have had issues with Apple's, but mainly with Export. I'd install one of those, and test. Let's hope that my memory is faulty on version numbers, and that Pr 6.0 CAN use the CODEC, when installed properly.
Good luck, and please report. I would be happy to be proved wrong on this one.
Hunt

Similar Messages

Importing and exporting from cc premiere pro is very slow

importing and exporting from cc premiere pro is very slow, the system has i7 processor and memory is 64 gb and has internal raid storage. what could be the issue.

If you would like to test the tuning and setup of your Premiere installation go to our Premiere Pro BenchMark PPBM, the Instructions page has the download file. This single download can test Premiere 6, 7 or 8 with the identical benchmark. We maybe able to tell you why you are having problems.

Need to find all Bugs and QF created for 8.0.0.13

Hi all,
I kneed to know how to find all bugs and possibly patches/QF created on top of 8.0.0.13 for bugs found in 8.0.0.13 after its release on Jan 2012. This is for my Customer that needs to know if they have to plan some QF in proactive way.
I can access to Internal Support Portal, so if there is any place where Support people can go I can access.
Thank you in advance
Chiara Scarafiotti
ACS TAM

Hi radhika,,
This the the way to go..just modify the col according to your table col names...
You can do a CONNECT BY query without a START WITH clause to link every node with each of its ancestors.
Getting the total is just a matter of GROUP BY.
SELECT emp_id, employee_name, manager_id
, CASE
          WHEN COUNT (*) = 1
          THEN 0
          ELSE COUNT (*)
     END               AS cnt0
,     COUNT (*)      AS cnt1
FROM employee
CONNECT BY emp_id     = PRIOR          manager_id
GROUP BY emp_id, employee_name, manager_id
ORDER BY emp_id;
output:
Output:
. EMP_ID EMPLOYEE_N MANAGER_ID CNT0 CNT1
1 Mark 0 5 5
2 John 1 3 3
3 Stella 1 0 1
4 Karen 2 0 1
5 Andrea 2 0 1
I made this a bottom-up query (going from each node to its ancestors) rather that a top_down query (node to descendants) because you can't GROUP BY CONNECT_BY_ROOT.
In your description you implied that each node would be counted among its own descendants, but in the sample output you had 0, not 1, as the count for all the leaves, that is, managers counted as their own descendants, but non-managers did not. The column called count0 in the query above does that; the column count1 counts each node as its own descendant, leaves included.
Regards
Onenessboy

Format of file Exported by SDK Exporter plugin for premiere pro cs4

Hi
I am trying to build a plugin which can use a custom codec to export an imported video to h264 format.
The codec which i have to use converts a YUV420 raw video to h264 format. As given in the Premiere SDK Guide
the SDK Exporter supports uncompressed 8-bit RGB with or without alpha, and packed
10-bit YUV (v410). The initial rendering is performed by the RenderVideoFrame() function call which is called in RenderAndWriteVideoFrame().
This is then converted using various calls like ConvertFrom8uTo32f(), ConvertFromBGRA32fToVUYA32f(), and ConvertFrom32fToV410().
The problem i m facing is that i m not able to verify if the RenderVideoFrame() is working correctly and the format in which it writes.
Is there any way to check using any media player that can play the exported video. Unless i know the exact(correct) exported format
i wont be able to convert it to the required YUV420 format that i need.
Also if i dont use the ConvertFrom functions and use only the video stream written by RenderVideoFrame, can u specify clearly the format
and any media player which can play it, so as to check the working.
Thanks
Agam

Zac do you have any charts on what the pixel formats each filter supports?
If you use quirky filters (Adobe or 3rd party) you know they implemented with the mandated pixel format (BGRA_4444_8u) but probably no others. The result is that no matter what the importer/workflow/compiler combo you think you're working in you are forced to use BGRA_4444_8u from that point on in the workflow. - so much for "native" DV, HDV, MPEG2, MPEG4, CineForm, RED, etc etc etc.
Can you provide a list of what PixelFormats the Adobe filters support?
It would great to see it for CS5|4|3 & Prem Pro 2.0*
Eg:     FILTER      PIXELFORMATS
     MOTION     BGRA_4444_8u   YUVA_4444_8u   V410   DV etc etc
     BLUR          BGRA_4444_8u   YUVA_4444_8u   V410   DV etc etc
     XXXXXX     BGRA_4444_8u   YUVA_4444_8u   V410   DV etc etc
     YYYYYY     BGRA_4444_8u   YUVA_4444_8u   V410   DV etc etc
That would be a fantastic table for the user to have. That way you know when you're forcing the workflow from the native import pixelformat type (and colorspace for that matter) back to 8bit RGBA. (and potentially loosing 10bit quality and screwing up the colorspace of rec601 and rec709).
I mention Premiere Pro 2.0 because it was the last version that processed the Timeline single threaded and thus the last version that single-threaded filters can be used on. 'fortunately plugins intended for later versions of Premiere will work with it because Prem Pro 2.0 understands the version 8 API of CS3 and CS4.
For this reason (legacy plugins) I'm in the process of pulling some plugins from CS3 into the Prem Pro directory to see it they work. I'm willing to do that even though the filter I want to use is BGRA_4444_8u only. - the filter is THAT important to me.
Sidenote: this is why I'm SO disappointed with CS5. Forcing plugins to be 64bit has killed the use of hundreds of 3rd party plug-ins created over the last 20 years - many of which are End Of Life and thus will only ever be 32bit. I would have been a lot happier to have CS5 implement proxy editing (ie OffLine editing) and then on Export click a button to use the Online (ie full res) material instead. That feature would have allowed v fast timeline rendering (with or without CUDA) and much lower requirements on cpu/gpu and storage. In the few instances that you need to edit in native 2k or 4k etc then sure do it but I bet 90% of the time you can work in 1080p or lower to get your movie produced.

Exported Interlaced Video by SDK Exporter plugin for premiere pro cs6

Adobe Premiere Pro CS6 for Project Setting Sequence is XDCAM HD422 1080i25(50i)
I tested the Plugin AVI(Uncompress) ,output interlaced video OK no problem.
I use Premiere Pro CS6 r2 SDK
I am trying to build a plugin for interlaced video.
Problem occured when I modified by the program below:-
SDK_Exporter.cpp at subroutine RenderVideoFrame
for interlaced video with PrPixelFormat_BGRA_4444_8u or PrPixelFormat_VUYA_4444_8u
and set
renderParms.inRenderQuality = kPrRenderQuality_High;
fieldType.value.intValue = prFieldsUpperFirst;
mySettings->exportParamSuite->ChangeParam(exID, 0, ADBEVideoFieldType, &fieldType);
renderParms.inDeinterlace = kPrFalse;
renderParms.inDeinterlaceQuality =kPrRenderQuality_High;
SequenceRender_GetFrameReturnRec renderResult;
    resultS = mySettings->sequenceRenderSuite->RenderVideoFrame(mySettings->videoRenderID,
                                                                videoTime,
                                                                &renderParms,
                                                                kRenderCacheType_None,
                                                                &renderResult);
    mySettings->ppixSuite->GetPixels( renderResult.outFrame, PrPPixBufferAccess_ReadOnly, &frameBufferP);
In frameBufferP is only progressive frame not intelaced frame
Please advise what should I do in order to get interlaced frame.
Regards,
Putaporn

Adobe Premiere Pro CS6 for Project Setting Sequence is XDCAM HD422 1080i25(50i)
I tested the Plugin AVI(Uncompress) ,output interlaced video OK no problem.
I use Premiere Pro CS6 r2 SDK
I am trying to build a plugin for interlaced video.
Problem occured when I modified by the program below:-
SDK_Exporter.cpp at subroutine RenderVideoFrame
for interlaced video with PrPixelFormat_BGRA_4444_8u or PrPixelFormat_VUYA_4444_8u
and set
renderParms.inRenderQuality = kPrRenderQuality_High;
fieldType.value.intValue = prFieldsUpperFirst;
mySettings->exportParamSuite->ChangeParam(exID, 0, ADBEVideoFieldType, &fieldType);
renderParms.inDeinterlace = kPrFalse;
renderParms.inDeinterlaceQuality =kPrRenderQuality_High;
SequenceRender_GetFrameReturnRec renderResult;
    resultS = mySettings->sequenceRenderSuite->RenderVideoFrame(mySettings->videoRenderID,
                                                                videoTime,
                                                                &renderParms,
                                                                kRenderCacheType_None,
                                                                &renderResult);
    mySettings->ppixSuite->GetPixels( renderResult.outFrame, PrPPixBufferAccess_ReadOnly, &frameBufferP);
In frameBufferP is only progressive frame not intelaced frame
Please advise what should I do in order to get interlaced frame.
Regards,
Putaporn

I need MP4 export plugin for Premiere 6.5

Hi there, i have Premiere 6.5 DV500 Pinnacle, and Windows XP but when i import something, the quality is ... Damn it!
Is very difficult upload a video in Youtube with good looking. I tried to export with indeo 4.4 ("best quality"), but i have to many problems with the conversion. Somebody help me please?

This is aimed at Premiere Pro, but may help
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Configuring import and export directories for Repository and Directory

Hello PI experts,
we have installed a new PI 7.11 system landscape.
Now we have an issue that when we export on our DEV system a Repository object (exapmple.tpz) it will be exported to K:\usr\sap\DEV\SYS\global\xi\repository_server\export
At the moment when we want to import this file in our PRD system we have to copy it from server A to server B and save it there in K:\usr\sap\PRD\SYS\global\xi\repository_server\import
Is there a wa to configure this that we do not have to copy the files maually.
Thank you!
Philipp

Hi Philipp,
this path is not changeable and I don't think this got changed in 7.11
so you need to do it manually or write a script that will move it once the file arrives
Regard,
Michal Krawczyk

SDK_Exporter_params.cpp in SDK Exporter plugin for premiere pro cs4

This question is regarding the code in
exSDKGenerateDefaultParams(exportStdParms                *stdParms,
                                         exGenerateDefaultParamRec    *generateDefaultParamRec) function
The below function is called in the above function's code
exportInfoSuite->GetExportSourceInfo(    exporterPluginID,
                                                kExportInfo_VideoFrameRate,
                                                &seqFrameRate);
to get info for videoframerate in seqFrameRate
Then seqFrameRate.mFloat64 is compared with different values in the code segment
if(timeSuite)
     timeSuite->GetTicksPerSecond (&ticksPerSecond);
     if (seqFrameRate.mFloat64 > 29.97f &&
            seqFrameRate.mFloat64 < 29.98f ||
            seqFrameRate.mFloat64 < 0.1f ||
            seqFrameRate.mFloat64 > 60.0f) // Strange values fall into this case
            timeSuite->GetTicksPerVideoFrame(kVideoFrameRate_NTSC, &seqFrameRateTicks);
for assigning the appropriate value to seqFrameRateTicks
The problem i m facing is that the value of seqFrameRate.mFloat64
is coming out to be zero(why?).
Also, since the type of ticksPerSecond and seqFrameRateTicks
is PrTime(which is a 64 bit int), i want to know what will be the best way
to convert them into other 32 bit values(int, float etc).
Thank You
Agam

Hi Agam,
This code in the CS4 SDK was written for the initial 4.0 release, where GetExportSourceInfo(kExportInfo_VideoFrameRate) originally returned a float value. In 4.0.1, this was changed (to be simpler for developers) to return a PrTime value. So in the CS5 SDK release, the code now looks like this:
exportInfoSuite->GetExportSourceInfo(
    exporterPluginID,
kExportInfo_VideoFrameRate,
&seqFrameRate);
frameRateValues.value.timeValue = seqFrameRate.mInt64;
So it now uses the mInt64 member of the union, because PrTime is a 64-bit int.
To convert PrTime to a float, the SDK Guide, chapter 3, section on Time, reads: "When a frame rate is represented as a PrTime, the frame rate is the number of ticks in a frame duration. The current number of ticks per second must be retrieved using the callback in the Time Suite." So just divide the PrTime value by the ticks per second returned by GetTicksPerSecond().
Cheers

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Import and Export header in CAUFVD

Hello all,
Can anyone tell me How to use Import and Export header for CAUFVD in function exit EXIT_SAPLCOZV_001 as my requirement is to populate overhead key automatically at the time of po order release. Do i have to use any function module ?? If yes then what and how?? I am new for enhancements so dont have much idea.
Thanks!!

Hi bala,
Thanks for your prompt reply. But can you please ellaborate where excatly i need to wirte this export parameter. My code looks like this:
IF wa_caufvd-zschl EQ space.
"Overhead Key
SELECT matnr matkl FROM mara INTO CORRESPONDING FIELDS OF TABLE it_mara
WHERE matnr = wa_caufvd-matnr.
SELECT werks zschl
   FROM zppoverhead
   INTO CORRESPONDING FIELDS OF TABLE it_zppoverhead
   FOR ALL ENTRIES IN it_mara
   WHERE matkl = it_mara-matkl
   AND werks = wa_caufvd-werks
   AND auart = wa_caufvd-auart.
IF sy-subrc EQ 0.
    wa_caufvd-zschl = wa_zppoverhead-zschl.
ENDIF.
ENDIF.
"Process Order Release
SELECT objid arbpl FROM crhd INTO CORRESPONDING FIELDS OF TABLE it_crhd
WHERE objid = wa_caufvd-st_arbid.
IF it_crhd IS NOT INITIAL.
SELECT werks zsubplant FROM zplantmaster INTO CORRESPONDING FIELDS OF TABLE it_zplantmaster
FOR ALL ENTRIES IN it_crhd
WHERE p_resource = it_crhd-arbpl.
ENDIF.
IF sy-subrc EQ 0.
wa_zpporders-zsubplant = wa_zplantmaster-zsubplant.
ENDIF.
As per my understanding i need to use export parameter for zschl, but how and where excatly.
Please guide me.
Thanks!!

Find import and export for method

Hi,
i wont to use method in se24 , how i now the import and export and ... for Method?
Regards

Hi,
for an easy use of methods i recommend using the button "pattern" in SE80. If you choose "ABAP Objects Patterns" the source of a method call is generated and all existing Parameters are listed.
You can display the parameters also within SE24. Call the Class of the Method. Then click on "Methods". Set the mouse focus on the method you are interested in and click the button "Parameters".
Hope this helps!
Regards
Mark-André

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

The Projects screen to import and export SAP xApp Manufacturing Integration

Hello:
On my SAP Discovery Server, On the Projects screen to import and export SAP xApp Manufacturing Integration and Intelligence (SAP xMII) projects.
Under the projects listed I see one Default project, is listed as a System Project.
I did an import and used one of the sample application, along with the ExportManifest.xml file.
"You can create an external project structure, include it in a zip file, and import it as a new project. You do not need an ExportManifest.xml file to import a project."
Now I see two projects listed as System Projects, is that ok, would that cause any issues? Is there any way that I could correct this?
Note:
If you import a project that already exists, the system overwrites the current project structure and files.
You can import hidden projects that do not appear on the Projects screen or in the SAP xMII Workbench. System-defined projects may appear in the Projects screen and in the SAP xMII Workbench, but you cannot delete them. You can import a project with the same name as a hidden or system-defined project and overwrite its properties. If you do this, they are no longer considered to be hidden or system-defined projects.
Thank you,

You could consider creating a project and exporting it to see the proper format of the zip file, including the ExportManifest. You should find attributes in the xml for setting the description, system type, etc.

Premiere CC support Closed Captions with mpeg2, mpg, ts import and export embedded

Using a side-car file is not an option. This question is about embedded closed caption files.
Will Adobe Premiere Creative Cloud support the import of closed captioned data from already captioned mpg, ts, mpeg2 video files, and will it support the export of mpg, ts, mpeg2 video with closed captions embedded? If they are adding this feature, do you know when? At least a rough estimate?
I create content that broadcasts ON DEMAND for major cable television providers and currently we are working with Mac Caption/ Caption Maker and Manzanita to individually caption each video. We need the ability to take the finalized captioned content and occasionally cut sections out and replace with other finalized captioned content. We wanted to do this without needing to RE-Caption every video after we export from Premiere, as that will add many additional hours of work per video.
Researching online I found that CC supports the import and export of embedded QuickTime closed captioned files. Our provider's standards are mpg/ts. One youtube video I found said that Adobe was adding mpeg2/ts support for closed captioning but I can not find any official word on the subject.
I appreciate any and all help/information on the subject.

Hi Waga Fox 5,
waga fox 5 wrote:
Is there somewhere that we can request this as a feature? We have not upgrade to 2014.1 yet, but it looks like that is still not a feature as you mentioned.
Yes, here you go: http://www.adobe.com/go/wish
Thanks,
Kevin

NEED TO FIND MP4 IMPORT AND EXPORT PLUGINS FOR PREMIERE 6.0

Similar Messages

Maybe you are looking for