Need to find news crawl style software

I need to find some software that will allow me to add news of the company in a typical news crawl style. This would be only for the company website not a RSS crawl/feed from outside.
Appreciate the help.

PVII's Horizontal Scroller can do that.
You can adjust their scrollers to auto, reverse, etc...
http://www.projectseven.com/products/tools/hscroller/hs01-aero.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media  Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

  • I just purchase a brand new mac computer and I need to purchase new adobe CS software. Do you know if Adobe CS5 Design Premium-MAc is compatible with new mac computers with the updated software?

    I just purchase a brand new mac computer and I need to purchase new adobe CS software for work. Do you know if Adobe CS5 Design Premium-Mac is compatible with new mac computers with the updated Yosemite software? *No previous adobe CS software versions are on this computer

    There are known technical issues with any older version on Yosemite, even CS6. Some can be worked out, others may not be relevant to you, some will remain unsolved.
    Mylenium

  • Why won't my Creaive Cloud find new updates for software?

    Why won't my Creaive Cloud find new updates for software? For example, I know Illustrator 17.1 has been released with cool new features; however, my creative cloud seems to be oblivious to this update and any other updates and I do not know how to make work properly again. Creative cloud hasn't prompted me to update any software for over a month and so it is likely missing plenty of updates; however, it is the Illustrator update I want most.
    Any help would be greatly appreciated.
    Thanks,
    Lee

    Lee if you remove and reinstall Illustrator do the new updates get applied?  If not then please review your installation log files for the error which may be preventing the update from being applied.  You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  Please feel free to post any specific errors you discover to this discussion.

  • Need to find PowerPC Data Recovery Software

    So, I was working one day inside my Power Mac G5 Quad by putting in some additional memory. Suddenly, my arm accidently pushes over my external hard drive with lots of my back up software. The drive falls to the carpeted floor. Next, I hooked it up to my mac to see if there was a problem with it. I found no problem other than all my programs were gone. The drive does post to the desktop and no clicking or bad hard drive noises come on. I then go to hook this up to my windows laptop and Windows chkdsk refuses to run, saying that the drive is not formatted.
    Can someone recommend for me a good data recovery software, other than Prosoft Data Rescue 3? I have had nothing but problems with that software as when it gets to stage 3 of 3, it hangs at 71.93 percent and stays there.
    I really want my data back as I also have a backup of my Gateway's windows image on there. I looked up a software called Boomerang Data Recovery, but they want like 140 dollars for a basic licence, and not to mention I heard bad things about that company such as, scamming people, no customer service, etc.
    I am looking for something affordable, but with which can do the job.
    Thanks.

    Ive never run into any trouble with Data Rescue (granted Im still using 2.0), but it sounds like what BDAqua said. Its probably hit a bad spot on the drive and yes it will sit there reading and reading and reading until it can get around it.. Last time I had to recover some stuff due to a lovely power outage, it took a few hours to get everything off of my 500GB storage drive..
    Id go with Diskwarrior for my 'second opinion'. DW is pretty good about it, and in the event it finds a problem, I like its reports alot better then Data Rescue. Data Rescue wont really wont tell you anything about the drive's problems other then it cant read data, but DW will let you know whats going on..
    If you need a general diagnostic tool for the whole system, TechTool Pro also has some nice disc tests in it amongst all the other memory/cpu/etc tools..

  • I need to play a DVD that was created on a microsoft machine on my Mac and need help finding the right converter software.

    I have received a "Data DVD" that was made on a windows machine and need to play it on my mac but am having trouble finding the right player or converter.I would like a free application if possible. Thank You,JerryStephen:-)

    I think I understand now.  The DVD has an auto start player (exe) that steps through the video's, html, whatever. Your gonna need windows or you'll be forced to look at the individual pieces seperately.  Html's you can open, idx files are subtitles, the video format is avi I'm guessing or maybe wma.
    Try this first, get the VLC player from video_lan.  It's a great tool to have in your toolbox.  It should play the video files at least (including subtitles).  VLC can play almost any format.

  • Need to find professional income tax preparation software, capable of handling 1065, 1120, 1041, 990, etc. preferably PPR compatible with Mac's OS

    Need to find pro tax prep software compatible w/Macs. My software maker, Drake, does not have Mac version. I've checked Pro-Series (no) and maybe 1 other. I don't want to spend Lacert kind of $$ (neither do the majority of longtime Lacert users apparently). Obviously, no Turbo Tax, Tax Cut or any other commercial, deduction & crdit missing commercial software. They would ned to have the ability to 1) convert a few years of Drake to their program, 2) Covert files created on PC to files that 10 OS could use. Also, would like them to have reasonable PPR program, free efile, free unlimited states, capable of 1040, 1065, 1120, & (S), 1041, 990. Built in tax knowledge base. I'd be eternally indebted to you if you found sometghing as intuitive and value oriented as Drake but for OS 10. BEGINNING TO THINK APPLE bends over backwords for artistic tools but not so much business tools. Too bad, I've had a few tax returns that have bordered on art.
    I will likely need to add Parallels & Windows 7 OS, preferably 64-bit to this Macbook Air. If so, I do not think I have sufficient memory or storage so would like to download & install onto NFTS (sp?) formatted 1TB HD. I do not know if hard drives, USB hubs, Optical drives etc. that work w/ Windows (as long as you choose correctly btwn SATA & IDE) will work on MacBook Air. Help greatly appreciated. So if you happen to know any pro tax prep software ompatible w/ OS 10 and/or, you could give me some info on what characteristics peripherals would need to have to use on MacBook (I'm hoping that most are inrterchanheable but my hoping ain't gonna make it so. OR if you know any great deals on Parallel-I saw some promos but not from reliable places. If I could find on Bradsdeals or Coupon Cabin I'd feel safe. I've seen  an Apple ad for a bundle of software w/ some other decent parts (Snagit) . I'd love to find a promo that applies to the bundle and download all 9programs for $9.99 (right). Too many questions, sorry for any protocol violations.  As you might have noticed, a keyboard is high on my agenda- I hate laptop keyboards though Apple's seems better than most. I also hate using scroll pads. Much rather have mouse. Real challenge is to find Bluetooth OS 10 keybrd that has numeric keypad. I wonder if the financial dept. @ apple uses keyboards w/ no numeric keypad, saw one that started at $99. I spent all the $$ I have on a MacBook, none leftover for overpriced peripherals, esp. w/ 2 kidfs going off to college in Sept.
    Thanks for allowing me to whine & ramble. Feel free to call me on any breach of protocol as I am 1st time poster.
    Thanks for your time and consideration, I HOPE I'M CORRECT IN MY GUT FEELING THAT I've joined the forces for good by switching. Too many PCs ruined by malware.
    Bill S

    Bill I've also run into a very similar problem, I own many Macs but I've had a PC for Tax Stuff. My PC broke and I refused to buy another one so I began to search for an alternative. Window's Emulators have given me so much trouble with my Tax Software.
    However, I've since found out that Intuit has a cloud based tax solution that works with a MAC because it's all done online. Which means you'll need a reliable internet connection whenever you want to prepare a client's return.
    It's suppose to support all of the major returns (1040, 1041, 1065, 1120, 1120S and 990)
    I've yet to use this solution, but it's the best thing that I've been able to find so far. This is what I'll be using this upcoming Tax Season.
    So I figured that it would be worth mentioning. Good Luck!
    http://accountants.intuit.com/tax/online/?s_cid=SEM&s_ev1=SEM_TOE_Brand_Lower-ke yword_proline_tax_online

  • I need help finding a workable web program that is not CSS based.  I tried IWeb and it just won't work for me.  Way too limiting.  I've been using a 12 year old copy of Macromedia Dreamweaver, but the new Dreamweaver is CSS

    Been building web pages for nearly 20 years, starting with GoLive.  Went to Dreamweaver about 12 years ago, the Macromedia version.  Tried going to iWeb when it came with a new Mac, but found it way too limiting with it's CSS template base.   Unknowlingly, I then bought a new copy of Dreamweaver.   Ooops, Adobe had bought Macromedia and Dreamweaver, too, is now CSS based, which for my money makes it useless to anyone who likes simplicity.   Now I find that even iWeb has been discontinued.  I was told yesterday that Apple doesn't have a web program any more.   At 12 years old, I just don't think it's practical to try to load my old Macromedia Dreamweaver into the new Mountain Lion (I'm getting a new Mac), though it is running, barely, in Snow Leopard.
    I need to find a web builder program that will permit simple construction of educational pages, nothing fancy, nothing artistic, just create a page, give it a color, type or drag in text, insert a table, insert pix in the table blocks, add text under the pix... done!    I should note that I am not looking to build traffic.  I teach simple things for free and people who want to learn those things (antique sewing machine repair, quilting, building longbows) find me.
    I've downloaded trial versions of half a dozen or so programs and looked at maybe 20 more, but all are either CSS based and drive me insane with requirments for constantly making rules and template models, and/or require that you base your web presence in their server.   Also, many will not work with pages built in other programs.  I maintian a volume of over 1000 web pages, many requiring regular updating, and they have been with the same server for more than 15 years.  I'm not about to change.
    So, anybody know a simple, old fashioned web builder that's happpy on a Mac platform?
    Captain Dick

    Although not supported anymore, iWeb does still function using Mountain Lion...
    http://www.iwebformusicians.com/iWeb/mountain-lion.html
    ... and you can purchase it from Amazon.
    Start with a blank page using the Black or WHite template.
    All modern websites use CSS and there are thousands of free templates to be had if you want to use a code entry style application. You will need to go this route if you want to create a site that is viewable on mobile devices although you can create an iPhone version using iWeb...
    http://www.iwebformusicians.com/iWeb/Mobile-iWeb.html
    Search this forum for numerous topics about iWeb alternatives.

  • HT3669 I only have a HP printer and why I need to install a file for all the HP printers drivers 590MB??? if normally the size of my file should be 5MB.  some one could me help to avoid installation of 590MB for my new mountain lion software???

    Hi guys..!!
    I would like to know if someone could help on this:
    I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
    If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
    Some one could help me how to avoid installation of 590MB for my new mountain lion software???
    Thanks

    If you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
    On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
    If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
    This article lists all of the printer models for which Apple distributes the driver:
    http://support.apple.com/kb/HT3669

  • JS:CS3 Newbie needs help! find/change character styles

    I'm new to scripting and JavaScript is giving me a headache, but I'll keep trying. What I'm trying to do is automate a few things so that the production time of our school newspaper is reduced while insuring accuracy.
    I've played around a little with the text find change sample and the changing or adding paragraph styles in the InDesignCS3_ScriptingGuide_JS.pdf and I barely understand what I'm doing.
    When us page designers receive text to place in the document, our editors mark the text with tags like: < b >text< / b >, where the word "text" is to be bolded. (there wouldn't any spaces between < and b and > etc. I just did that so It'll show up here). We have basic character styles and paragraph styles set up, and we just started working with nested styles.
    Is there a way we can search for the < b > tag and bold everything after it up until the < / b > tag? Sort of the way it does for html (the way it would do for this message if I took out the spaces). It'll be great if it could remove the tags as well, but if not, I know I could create a find/change script to do the removal afterwards.
    I appreciate any input.
    Thanks!

    You've not found yourself the easiest of tasks! You need GREP find/replace, not text. Do you have any experience with GREP? It's worth investigating, it's a powerful feature. The script below handles bold. For clarity, it doesn't do any error checking: it assumes that there's a document with text in it and that the document contains a character style called 'bold'.
    // talk to Indesign, nobody else
    #target indesign
    // reset the Find/Change dialog
    app.findGrepPreferences = app.changeGrepPreferences = null;
    // find everything between <b> and  (including these codes)
    app.findGrepPreferences.findWhat = '<b>.+?</b>';
    // add 'bold' style
    app.changeGrepPreferences.appliedCharacterStyle = 'bold';
    // make the changes
    app.activeDocument.changeGrep();
    // now delete the <b> and </b> codes
    app.findGrepPreferences = app.changeGrepPreferences = null;
    app.findGrepPreferences.findWhat = '</?b>';
    app.changeGrep();
    You can adapt it easily to handle other codes, and at a later stage you could generalise it so that you needn't repeat whole bunches of code.
    Good luck with your first forays. Again, it's not the easiest of tasks, but it's worth getting to grips with.
    Peter

  • I need to find out how to transfer all the music from my old IPOD to my new IPOD.  Not all of my music was purchased on ITUNES.

    I need to find out how to transfer all my music from my original IPOD nano to my new IPOD nano.   I want to keep both and not all of my music was purchased on ITUNES.  Please help!

    Your music should be in your iTunes library, that is how it gets synced to the iPod. If that music is not present in the iTunes library, you will need to get a 3rd party software for the computer to get the music off the original iPod and then move it to the iTunes library to be able to sync it to the new iPod. You can see some additional information in this tip supplied by a fellow user. Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I have a PowerPC G4, 1.5 Ghz, with 1.5 GB of ram. Currently running OSX 10.4.11.  Can I upgrade to 10.5.8 (or higher)?  Need to load new software and said that was the minumum requirement.

    I have a PowerPC G4, 1.5 Ghz, with 1.5 GB of ram.
    Currently running OSX 10.4.11. 
    Question: Can I upgrade to 10.5.8 (or higher)?  Need to load new software and said that was the minumum requirement was 10.5.8
    Thanks, WPC-2012

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    The DVD should look like this
    Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
     Cheers, Tom

  • I need to find where I can download CD label print. I just got a new computer.

    I just bought a new computer and have used CD Label print for years but I can't find it on the Canon website. I could go to some of those 3rd party sites, but they just load you down with stuff I don't want. I need to find out where I can download it. Thanks.

    Hi Macma,
    The Easy-PhotoPrint EX program that comes with the printer can be downloaded from the Canon USA website and assist you with printing CD labels.  Please click here to go to the Drivers and Software page for your PIXMA MG5420.  Once on the initial download page for your model, please do the following:
    1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2. Next, please click on the red arrow next to the "SOFTWARE" section and click the EASY-PHOTOPRINT EX file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

    hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

    If your computer is running an OS X prior to Snow Leopard 10.6,
    the answer (if it is an Intel-based Mac; not old PowerPC model)
    would be to buy the retail Snow Leopard 10.6 DVD from Apple
    for about $20, and install it. Then update that to 10.6.8 by using
    the installed Snow Leopard online to get Combo Update v1.1 for
    Snow Leopard 10.6.8. After that is installed & updated, run the
    system's Software Update again, to see what else is available to
    that system.
    Later systems can then be looked into at Mac App Store, once
    the computer is running Snow Leopard 10.6.8.
    And if your computer is a Power PC (G4/G5, etc) and has no
    Core2Duo kind of CPU -- See "About this Mac" in apple menu
    to disclose the general info about your Mac. Also you can see
    even more by clicking on "More Info" when looking in there...
    If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
    Hopefully this helps.
    Good luck & happy computing!

  • HT4623 I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. Iff i double click on it it opens. Any i

    I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. but i cant find it in my apps if i double click on it it opens. Any ideas?
    Thanks Pete

    I have the same problem.  Some of my purchased songs are missing also.

  • User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

    User with a paid CC acct, getting "Print.ai" is an unknown format' when trying to open new file. Computer was recently attacked by ransomeware and wonder if I need to re-install Creative cloud software....need help asap!!

    First, ask in the forum for the program you are using
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    Second, do a complete scan with a good anti-virus program to be sure your computer is clean... I use Norton, there are others

Maybe you are looking for

  • ASA 5510 'bounces' UDP packets. Why?

    Hi. I hope to find someone who can shed a light on something that is bugging me for days now. We have an ASA (5510, running 7.2(2)) to connect our subnets to the backbone of the ISP. I received complaints about one specific connection, which I'll "dr

  • Java.text.SimpleDateFormat millisecond problem...

    When I run this code: java.text.SimpleDateFormat formatter = new java.text.SimpleDateFormat(); formatter.applyLocalizedPattern("yyyy-MM-dd HH:mm:ss.000000"); java.util.Date date1 = formatter.parse("2001-08-14 13:49:38.000000", new java.text.ParsePosi

  • Named Query Syntax

    Hi, Can any one send me syntax for named query for the following scnerio? Table name : EMP Columns: EMP_CODE,EMP_NAME,DEPT_CODE and I need to select all rows from EMP for a specific DEPT_CODE. My query should look like "select emp.emp_code,emp.emp_na

  • Windows 7 SP1 Installation Issues

    I am deploying SP1 for Windows 7 via Patch Management and I am running into some issues with the installation. I have the prerequisite installing prior the the service pack and that gets installed properly. The machines are rebooting after a time out

  • Problems Running a TCP/IP Data Server VI as a Windows XP service

    I need to run a TCP/IP data server as a Windows service.  As my first step, I modified the LabVIEW example "Multiple Connections - Server.vi" under the TCP.llb to eliminate all controls with constants.  I can run succesfully the VI under the LabVIEW