Need to find out a way to figure out how DB2 connect to Oracle and data mirroring etc.

Hi, Gurus,
I just take over a project which source is ICOMS as400 db2 database. Seems data mirro CDC is used to replicate from DB2 to oracle.
I am very new to this datamirror CDC , plus I am new to figure out how db2 connect to oracle, is that through db link or what? or is there tnsnames entry?
I would like anybody in this forum can point me to the right direction.
Thanks in advance.

user9233598, if mirroring/replication from DB2 to Oracle already exists then question is what product is being used?  If the product has already been purchased then I do not think it is very likely that management is going to want to purchase another product so I do not see how extra-cost Golden Gate or other Oracle Gateway features apply if those are not currently in use.  If Golden Gate or the Oracle Transparent Gateway are in use then you already have your answer
Oracle supports ODBC/JODBC and the replication application on the AS400 likely uses these features or a thick Oracle client as the interface to Oracle.
HTH -- Mark D Powell --

Similar Messages

  • I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

    I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues).  And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

    Thanks, I appreciate the help.  I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

  • In Report Painter, need to find out how a field is defined.

    I'm trying to find out how a field used in a current report is defined.  For example, columns 2-13 are monthly columns.  Double clicking on the column name (April), for example, brings up the box "Element Definition: April;$Year.  The Value Field is Net Sales.  Clicking the drop down box brings up a group of fields, including Net Sales. 
    The Field Name for Net Sales is MA0001.  How do I find out how this field is defined and what accounts are included in it?
    Thanks for any help you can give.

    Hi,
    Thank you for your answer.  I was able to track 'Net Sales' as a part of a Key Figure Structure and as an element of Key Figure 'Net Sales'.  However, when I get into CO-PA, Information System, there is no line for 'Report Components'. 
    There are the following lines/folders: Display Line Item List, Define Report,Current Settings, Background Processing.  I looked at all the possibilities in those line items/folders and nothing was there.  Is there another way to get at it?
    Thanks again.

  • Need to find out how many users are using Siebel Application

    Hello all,
    I need to find out how many users are using Siebel Application?
    Is there a way I can find out?
    Thanks.
    yasun

    Hi,
    Read the following:
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
    For full information about server status and statistics red:
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
    T.Abed

  • I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

    I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

    Go into your Settings : General : and turn off background refresh for your apps.  In Settings : Mail  turn Fetch new data to OFF and Load Remote Images to OFF.  This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
    Turn off push notifications every chance you get.
    Make sure you are actually quitting apps:  to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app.  To quit the app swipe from the screen image (not the icon) upward off the top of the iPad.  You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
    Turn off your internet connection when you do not need it.  The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode.  You can repeat this sequence to turn it back on again when you need it.  Most especially turn airplane mode on whenever you are sleeping your iPad for long periods.  This will save battery life too.  OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off.  If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

  • Is there a way to find out how many ESS driven updates to data over a perio

    Is there a way to find out how many ESS driven updates to data over a period of time have been done.

    Assuming that all end users are accessing the back end via Portal, we figured out the answer.

  • I need to find out how to have Speakable Items available each time I boot up.

    I use Mavericks Speakable Items every day to open and close applications without using my mouse if function keys.
    The only way I get it to start is to calibrate it AFTER boot up.
    I need to find out how to have it available each time I boot up my Mac Mini with OS 10.9.4,
    Suggestions.

    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

  • I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically. Can some one out there help me?

    I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically.

    Update automatically under which circumstances, exactly?

  • I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

    I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

    If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
    Download a free trial or buy Adobe products | Adobe downloads

  • My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

    My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

    The cost is $149 for all the phones except the iphone 4S that one is $199. Apple does not cover any acidental damage

  • Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

    Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
    pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

    No Clipboard, no copy & paste, as you would not get the full information of the image.
    When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
    Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

  • Need to find out how much % of query completed from OEM

    Need to find out how long will a query take to run or when I am running the query where can I check to see that X% of my query is complete.
    Is that % shown on OEM --> Performance --> Top Activitity?

    Under OEM/GC of release 10g you won't be able to see how long the query will take neither how much % of a query are already finished.
    I know that this functionality was given in the old release of the OEM (javas based GUI with ll the databases on the left side). I'm missing
    that old functionality, too...

  • I need to find out how to transfer all the music from my old IPOD to my new IPOD.  Not all of my music was purchased on ITUNES.

    I need to find out how to transfer all my music from my original IPOD nano to my new IPOD nano.   I want to keep both and not all of my music was purchased on ITUNES.  Please help!

    Your music should be in your iTunes library, that is how it gets synced to the iPod. If that music is not present in the iTunes library, you will need to get a 3rd party software for the computer to get the music off the original iPod and then move it to the iTunes library to be able to sync it to the new iPod. You can see some additional information in this tip supplied by a fellow user. Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I need to find out HOW I can download Adobe Acrobat 10.

    I have my serial number, where the product is registered to me through Adobe, but I cannot find the software.
    How can I download the product now?
    I need Adobe Acrobat 10
    Thanks!

    I think it must have originally come installed on my Dell computer.  I don't remember actually seeing an install disk.  But I registered it with Adobe, and they show my serial number.  I was just trying to avoid having to buy the program again, because I have changed computers, and the new computer doesn't have Acrobat on it. 
    Thanks for all your help!
    Pat Willener <[email protected]> wrote:
    Pat Willener http://forums.adobe.com/people/pwillener created the discussion
    "Re: I need to find out HOW I can download Adobe Acrobat 10."
    To view the discussion, visit: http://forums.adobe.com/message/5472663#5472663

  • Need to find out how to install QuickTime Pro on a new device using current license.

    I broke the screen on my previous laptop/tablet and had to replace it. I had paid for QuickTime Pro and have an active license. I need to find out how to install QuickTime Pro on a new device using current license. My old device has been destroyed.

    Download and install the free QuickTime Player 7 from Apple and enter your registration info to unlock the Pro features.

Maybe you are looking for