Need to find out View definition by SQL PLUS

Hi,
I have a view VW_XXX, I want to know by which table this view has created. But need to use only SQL PLUS not any tool.
Please let me know how cani see the full definitio of the view by SQL PLUS.
Regs,
brij

Yes, it will work for both 9i and 10g. Just run the commands, and you will get the output.
These are not "Dangerous Commands!!!"
Regards
Girish Sharma
Edited by: Girish Sharma on Dec 26, 2011 5:19 PM
To solve these issues Oracle9i has introduced the DBMS_METADATA package which can be used to retrieve object definitions as DDL or XML. There are a number of ways to use the API, but I suspect the majority of people will only ever use the following functions.
Source:http://www.oracle-base.com/articles/9i/MetadataAPI.php
Edited by: Girish Sharma on Dec 26, 2011 5:36 PM
And here it is doc link :
http://docs.oracle.com/cd/A91202_01/901_doc/appdev.901/a89852/d_meta11.htm#1024701

Similar Messages

  • TS1646 We have several apple devices in our family who use my debit card for itune charges.  I need to find out which device (itune account) these charges are coming from.  Can you help?

    We have several apple devices in our family who use my debit card for itune charges.  I need to find out which device (itune account) these charges are coming from. Can you help?

    You can't tell which device a purhcase was made on, but if your family members each have their own iTunes account to which your card is linked then you can check the purchase history on each of those accounts via the Store > View Account menu option on your computer's iTunes - that should have 'purchase history' section with a 'see all' link to the right of it

  • Need to find out what has been modified to running-config

    Hello,
    When I enter the "reload" command, Cisco ASA 5510 asks me
    a question: System config has been modified Save? [Y]es/[N]o:
    All I did was issuing a few "show" commands before the "reload" command. I definitely need to find out what
    has been modified before the reboot
    Is there any way to find out what has been modified to the running configuration.
    Thanks!

    If you want to know when changes are made, but don't want to setup TACACS (and you have a syslog server setup), you can have the router syslog all commands entered while in config mode:
    devcorert01#conf t
    devcorert01(config)#archive
    devcorert01(config-archive)#log config
    devcorert01(config-archive-log-cfg)#hidekeys
    devcorert01(config-archive-log-cfg)#logging enable
    devcorert01(config-archive-log-cfg)#notify syslog
    Anytime someone enters any command while in config mode, the command will be sent to your syslog server.
    Examples:
    Jul 21 10:15:41 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:do sh run
    Jul 21 10:17:33 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:interface GigabitEthernet2/2
    Jul 21 10:17:38 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:shutdown
    Jul 21 10:17:42 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:no shutdown
    Note the "do show run". Even thought that is not a config command per se, it was entered while in config mode. Also notice the user is "console". If it was from a telnet session, you would see
    Jul 21 10:17:33 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:interface GigabitEthernet2/2
    Jul 21 10:17:38 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:shutdown
    Jul 21 10:17:42 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:no shutdown
    Mike

  • I need to find out HOW I can download Adobe Acrobat 10.

    I have my serial number, where the product is registered to me through Adobe, but I cannot find the software.
    How can I download the product now?
    I need Adobe Acrobat 10
    Thanks!

    I think it must have originally come installed on my Dell computer.  I don't remember actually seeing an install disk.  But I registered it with Adobe, and they show my serial number.  I was just trying to avoid having to buy the program again, because I have changed computers, and the new computer doesn't have Acrobat on it. 
    Thanks for all your help!
    Pat Willener <[email protected]> wrote:
    Pat Willener http://forums.adobe.com/people/pwillener created the discussion
    "Re: I need to find out HOW I can download Adobe Acrobat 10."
    To view the discussion, visit: http://forums.adobe.com/message/5472663#5472663

  • I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically. Can some one out there help me?

    I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically.

    Update automatically under which circumstances, exactly?

  • Need to find out how to lock a point in a path that will not allow the rest of the path to rotate or move around it

    Hello,
    I am having some trouble with using shape layers and paths to create a solid, flat 'hair' effect in a cartoon animation.
    I have used a semicircle shape layer as the hair on the head itself and then a path with a stroke of the same width as the semi circle to be the long part of the hair.
    Unfortunately when I move/rotate the bottom point in the path it causes gaps to appear further up where the stroke is rotating around the point at which the stroke is supposed to "connect" to the semi circle.
    I have included a couple of screenshots of me rotating the hair opposite ways so you can see.
    - imgur: the simple image sharer
    - imgur: the simple image sharer
    I need to find out if there is a way to lock the top point in place where it joins the semi circle blond hair which will stop this part from moving at all, even rotating around the point.
    But the bottom needs to move freely and obviously the part between the two points will move fairly naturally.
    If you can imagine how a girl with long hair has her hair attached to her head, it does not move at all, but the bottom moves freely. It needs to be like this.
    If you can provide any assistance it would be greatly appreciated.
    Thanks!

    That is perfect thank you so much!
    Can't believe I didn't think of that but you da real MVP!

  • I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

    I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues).  And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

    Thanks, I appreciate the help.  I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

  • I need to find out  the  list of outbound made it  to the vendor

    I need to find out if the attached list of outbound  made it  to the vendor.
    and i have  list of all IDOC numbers that i need to check.  Could you please assist? how to check?
    Please do needful.
    Thanks in advance.
    Regards,
    PIneeder.

    Hi,
    If you want to check it in XI/PI check first:
    - in the abap stack transaction:
                  - sxmb_moni and filter for your sending system and idoc type
                         or
                  - idx5 fill in the date when the idoc was sent and the idoc number from the sending system and through double-clicking you will get to the same message as in sxmb_moni
    - in the runtime workbench (only if the communication with the partner is done via a java based adapter (all except xi,http and idoc) go to the runtime workbench and then click on message monitoring and filter for your messages. If the status there is succesfull then you can safely assume that the message was delivered to the partner. Note: it sometimes happens that a PI server also has one or more decentral adapter engines. In this case you need to check if your communication channel is deployed on any of them (you can check that in the Integration Builder) and then select the corresponding one in the Runtime workbench -> Message Monitoring -> Message from Component.
    Hope this helps,
    Horia

  • I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

    I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

    If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
    Download a free trial or buy Adobe products | Adobe downloads

  • My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

    My screen on my iPhone has cracked and I need to find out how much it costs to get it fixed

    The cost is $149 for all the phones except the iphone 4S that one is $199. Apple does not cover any acidental damage

  • Need help with getting images to look smooth (without the bitmap squares) around the edges. When I transfer the image from pictures, it sets itself into the InDesign layout, but with square edges. I need to find out how to get it to look smooth?

    Need to find out how to get my images transferred into an InDesign layout without the rough edges, as with a bit map image, but to appear with smooth edges in the layout. I can notice it more when I enlarge the file (pic). How can I get it to appear smooth in the finished layout. Another thing too that I noticed; it seems to have effected the other photos in the layout. They seem to be
    pixelated too after I import the illustration (hand drawn artwork...)? Any assistance with this issue will be greatly appreciated. Thanks in advance.

    No Clipboard, no copy & paste, as you would not get the full information of the image.
    When you paste you can't get the image info from the Links panel, but you can get resolution and color info either via the Preflight panel or by exporting to PDF and checking the image in Acrobat.
    Here I've pasted a 300ppi image, scaled it, and made a Preflight rule that catches any image under 1200ppi. The panel gives me the effective resolution of the pasted image as 556ppi. There are other workflow reasons not to paste—you loose the ability to easily edit the original and large file sizes—but pasting wouldn't cause a loss in effective resolution or change in color mode.

  • Need to find out how many users are using Siebel Application

    Hello all,
    I need to find out how many users are using Siebel Application?
    Is there a way I can find out?
    Thanks.
    yasun

    Hi,
    Read the following:
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
    For full information about server status and statistics red:
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
    T.Abed

  • Need to find out how much % of query completed from OEM

    Need to find out how long will a query take to run or when I am running the query where can I check to see that X% of my query is complete.
    Is that % shown on OEM --> Performance --> Top Activitity?

    Under OEM/GC of release 10g you won't be able to see how long the query will take neither how much % of a query are already finished.
    I know that this functionality was given in the old release of the OEM (javas based GUI with ll the databases on the left side). I'm missing
    that old functionality, too...

  • I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

    I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

    Go into your Settings : General : and turn off background refresh for your apps.  In Settings : Mail  turn Fetch new data to OFF and Load Remote Images to OFF.  This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
    Turn off push notifications every chance you get.
    Make sure you are actually quitting apps:  to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app.  To quit the app swipe from the screen image (not the icon) upward off the top of the iPad.  You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
    Turn off your internet connection when you do not need it.  The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode.  You can repeat this sequence to turn it back on again when you need it.  Most especially turn airplane mode on whenever you are sleeping your iPad for long periods.  This will save battery life too.  OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off.  If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

  • I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

    I have two copies of CS6 and I need to find out which serial number is installed on which computer. How do I find the serial number once it's installed on a computer?

    if they're pcs, Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

Maybe you are looking for