Need to find user's usergroup

hi ,
i have a swing application ,user needs to enter userid and password to use this tool,this user id is nothing but a DB2 server userid and password which is running on AIX system .
now my question is , user entered his userid and password ,if the user valid user , i wanted to find user group through java.
if any one come across such kind of development,could you please help me out..
thanking you in advance...

Dear Ashok,
Please check after making invoice is it possible to change the Tax classification in the same billing documnet, bcoz in standard it will get grayed out.
And in the Change logs there is no entry, user had changed to different tax during creation itself.
And you can conclude, the USER who created the Billing had changed the Tax classification.
Regards,
Mani,

Similar Messages

  • Need to find user exit for Auto TO creation

    Dear SAP WM experts
    I need to filter the TR getting converted into TO automatically
    I can see, in configuration, that an exit is suggested for the same:
    This configuration refers to OMKZ transaction, package LVSC
    When I search using the same in SMOD, I do not get any entries
    Any help would be appreciated!
    Thanks
    Yogesh.

    Hi Yogesh!
    For "Automatic TO creation (background processing)", the following user exits are available:
    MWMTOAU1 Selection of requirements for automatic creation of orders.
    MWMTOAU2 Reference number assignment.
    MWMTOAU3 Selection of posting change notices for automatic creation of transfer orders.
    See Develop User Exits for Warehouse Management - Warehouse Management - SAP Library
    My guess is, that the MWMTOAU1 user exit is the one you are looking for.
    The SAP documentation says:
    "With this user exit, you can select transfer requirements for the
    automatic TO creation according to your own criteria by means of report
    RLAUTA10."
    Best Regards!
    Tim Lutz

  • Find User Exit in MIR7 to validate Vendor info

    When incoming invoice is being “parked” in transaction MIR7, I need to find user exit to add validation/warning if vendor has multiple PI partners in the vendor master. It has to happen when user types in PO number and hits enter key – this is when vendor info is retrieved in top right corner of the screen.
    Any suggestions/recommendations would be greatly appreciated.
    G.B.

    It looks like function module MRM_HEADER_CHECK is called from fm MRM_INVOICE_CREATE during invoice creation. I tried to set break points there, but it does not seem to be executed when I need it.
    I already know how to check for multiple PI partners ( table WYT3 ). What I need is to find a user exit in MIR7 with PO # available when user types in PO number and hits enter key and vendor info is retrieved in top right corner of the screen. I need something similar to routine USEREXIT_XKOMV_BEWERTEN_INIT in include RV61AFZB, but PO # is not available there. Any ideas?
    Thanks in advance,
    G.B.

  • Need to find out how many users are using Siebel Application

    Hello all,
    I need to find out how many users are using Siebel Application?
    Is there a way I can find out?
    Thanks.
    yasun

    Hi,
    Read the following:
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
    For full information about server status and statistics red:
    http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
    T.Abed

  • Need to find sql/users that is parsing but NEVER executing

    hello all,
    I have been trying to figure out how to find sql or user who are pharse sql but not executing them. thats becoz my execute to prase % in my AWR report is negative. meaning someone is parsing statements and NEVER executing them. They are just chewing up your CPU, latching the shared pool, killing your performance.
    which is not a good thing and i want to find out what user is doing that or what SID or what sql is diong whats its doing. How can i find that out. Any querys out there to do that or ?? THANKS
    this is 10.2.0.3 on AIX. and here is part of AWR
    Instance Efficiency Percentages (Target 100%)
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                Buffer Nowait %:  100.00       Redo NoWait %:  100.00
                Buffer  Hit   %:   80.74    In-memory Sort %:   99.10
                Library Hit   %:   92.95        Soft Parse %:   91.24
             Execute to Parse %:  -31.89         Latch Hit %:   99.99
    Parse CPU to Parse Elapsd %:   87.32     % Non-Parse CPU:   99.92
    Edited by: user630084 on Mar 13, 2009 7:51 AM

    true i can use that, I am getting about 8 rows out of it and there are about 100+ connections as of now. But here is the thing. As the app use only one schema(lets call it scott). Everybody login thru that schema (scott/tiger)...so that 87 rows that i am getting..all of them are parsing_schema_name=scott and parsing_user_id=55 ..........but i need those 8 users SID...so i can pin point...hey u are the one who is just prasing and not executing...if you know what i mean...so i need that SID...i got the parsing_schema_name and parsing_user_id...but need the SID...so how can i get that ???

  • Need to find professional income tax preparation software, capable of handling 1065, 1120, 1041, 990, etc. preferably PPR compatible with Mac's OS

    Need to find pro tax prep software compatible w/Macs. My software maker, Drake, does not have Mac version. I've checked Pro-Series (no) and maybe 1 other. I don't want to spend Lacert kind of $$ (neither do the majority of longtime Lacert users apparently). Obviously, no Turbo Tax, Tax Cut or any other commercial, deduction & crdit missing commercial software. They would ned to have the ability to 1) convert a few years of Drake to their program, 2) Covert files created on PC to files that 10 OS could use. Also, would like them to have reasonable PPR program, free efile, free unlimited states, capable of 1040, 1065, 1120, & (S), 1041, 990. Built in tax knowledge base. I'd be eternally indebted to you if you found sometghing as intuitive and value oriented as Drake but for OS 10. BEGINNING TO THINK APPLE bends over backwords for artistic tools but not so much business tools. Too bad, I've had a few tax returns that have bordered on art.
    I will likely need to add Parallels & Windows 7 OS, preferably 64-bit to this Macbook Air. If so, I do not think I have sufficient memory or storage so would like to download & install onto NFTS (sp?) formatted 1TB HD. I do not know if hard drives, USB hubs, Optical drives etc. that work w/ Windows (as long as you choose correctly btwn SATA & IDE) will work on MacBook Air. Help greatly appreciated. So if you happen to know any pro tax prep software ompatible w/ OS 10 and/or, you could give me some info on what characteristics peripherals would need to have to use on MacBook (I'm hoping that most are inrterchanheable but my hoping ain't gonna make it so. OR if you know any great deals on Parallel-I saw some promos but not from reliable places. If I could find on Bradsdeals or Coupon Cabin I'd feel safe. I've seen  an Apple ad for a bundle of software w/ some other decent parts (Snagit) . I'd love to find a promo that applies to the bundle and download all 9programs for $9.99 (right). Too many questions, sorry for any protocol violations.  As you might have noticed, a keyboard is high on my agenda- I hate laptop keyboards though Apple's seems better than most. I also hate using scroll pads. Much rather have mouse. Real challenge is to find Bluetooth OS 10 keybrd that has numeric keypad. I wonder if the financial dept. @ apple uses keyboards w/ no numeric keypad, saw one that started at $99. I spent all the $$ I have on a MacBook, none leftover for overpriced peripherals, esp. w/ 2 kidfs going off to college in Sept.
    Thanks for allowing me to whine & ramble. Feel free to call me on any breach of protocol as I am 1st time poster.
    Thanks for your time and consideration, I HOPE I'M CORRECT IN MY GUT FEELING THAT I've joined the forces for good by switching. Too many PCs ruined by malware.
    Bill S

    Bill I've also run into a very similar problem, I own many Macs but I've had a PC for Tax Stuff. My PC broke and I refused to buy another one so I began to search for an alternative. Window's Emulators have given me so much trouble with my Tax Software.
    However, I've since found out that Intuit has a cloud based tax solution that works with a MAC because it's all done online. Which means you'll need a reliable internet connection whenever you want to prepare a client's return.
    It's suppose to support all of the major returns (1040, 1041, 1065, 1120, 1120S and 990)
    I've yet to use this solution, but it's the best thing that I've been able to find so far. This is what I'll be using this upcoming Tax Season.
    So I figured that it would be worth mentioning. Good Luck!
    http://accountants.intuit.com/tax/online/?s_cid=SEM&s_ev1=SEM_TOE_Brand_Lower-ke yword_proline_tax_online

  • Can't find user exit or enhancement at RGJVBR15

    Hi everyone,
    I need your help guys. Right now,i'm developed sapscript for billing statement (cash call and expenditure). I have finished the form but i have problem at print program RGJVBR15. This print program is called by RGJVBR10 (Tcode : GJ14 --> Hard Copy Billing).GJ 12 and GJ 13 is used to extract data that will be used by forms.
    There is statement like this in RGJVBR15 at subroutine CREATE_EXPENDITURE (Line 1421 in include file RGJBF_I1) :
    AT NEW C5_CURR. --> Group by funding currency
       PERFORM POPULATE_SPOOL_ID
    ENDAT.
      PERFORM F6100_PROC_...  -> This will be used to open form,write form (sapscript)
    AT END OF C5_CURR.
    ENDAT.
    The problem is that i want to change this logic. I want to change the standard logic (display report group by funding currency), i want to ignore this and instead using group currency. So there only one report produced with one currency only (if using standard logic there is more than 1 report based on funding currency). But i can't find user exit or enhancement in this SAP Standard Program. Is anyone know if there is user exit or enhancement in this program? I don't want to use implicit enhancement because it's will produce problem when client want to upgrade their system. Thank you.
    Best Regards,
    Satria

    hi,
    for tcode GJ14 user exits avaliables are
    Exit Name           Description
    JVA-IM-1             Joint Venture: Integration Manager Set Intercompany Lines
    JVA_IM_2            User Exit Splitting
    JVA_IM_3            User Exit Check Document
    regards,
    paras

  • I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

    I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues).  And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

    Thanks, I appreciate the help.  I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

  • Need to find the SID of a forms session.

    Hi,
    I need to find the SID of a form session. How to find the same.
    Eg:- If a user connected to our EBS system, Then automatically one sid will be generated to that user. I need to find the SID for this user. If given detailed steps it would be great help.
    Regards
    SR.

    Hello,
    Although I am a bit unclear about the question. But please see if the following helps;
    I can query the v$session to know about the SID. Here is a simple example;
    select  sid,
    substr(username,1,15) "DB UserName",
    substr(osuser,1,15) "OS UserName",
    substr(command,1,3) CMD,
    substr(machine,1,10) Machine,
    terminal, process, status,
    substr(program,1,50) "OS Program Name"
    from v$session
    where type = 'USER'
    order by usernameHere is a sample output;
                SID DB UserName     OS UserName     CMD MACHINE    TERMINAL         PROCESS      STATUS   OS Program Name
                  7                 SYSTEM          0   ORAAPPPROD ORAAPPPROD       976          ACTIVE   ORACLE.EXE
                  8                 SYSTEM          0   ORAAPPPROD ORAAPPPROD       3548         ACTIVE   ORACLE.EXE
    Additionally you can also review Oracle Metalink Script: How To Identify The apps User Using The O/S PID For Forms Users In 11i Doc ID: Note:185762.1.
    https://metalink.oracle.com/metalink/plsql/f?p=130:14:38346007578631471::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,185762.1,1,1,1,helvetica
    Hope it helps. Maybe others might add in this.
    Adith

  • Name in Find User Results Form

    Hi:
    I need to hide (or quit) the first column (Name) in Find User Results Form. It is possible?. There is a function that indicates all of columns, but the first column is not there.
    If is not possible to hide or quit it, can i move it to another position?
    Any idea?
    Thanks.
    MJ.

    Here is the summary:
    To set attribute view visibility/query indexing/accounts list view,
    edit in UserUIConfig.xml ->
    SummaryAttrNames
    QueryableAttrNames
    AppletColumns
    To modify Accounts Find Users and search results,
    edit idm/sample/userSearchDefaults.xml
    getSearchableAttrs
    getResultColumns
    If you do this method, you will not need to edit
    Find User Form
    OR
    Find User Results Form !
    This simplifies the problem greatly.
    I hope this helps somebody, because i didn't get any info from the forums.
    -jason

  • Can't Find "Users Teams"

    I just installed Service Desk 7 and I'm trying to configure it for testing; we have a valid license. I have full admin rights to the server (SLES 11 SP2, mysql) and Service Desk. I can't, for the life of me, find where to create new teams or organizational units.
    The documentations says:
    Users > Teams
    Where ever I find "user" I can't then find a path to "teams." The default team and organization are there, but that's no help in the long run. The initial install seems too simple for me to have messed something up. What am I missing?

    You need to login as supervisor for adding teams. You will see that in the user(technician) view Users->teams
    On adding organization units - you can do it in two ways
    1. Organizational Unit relationships can also be mapped from the authentication(LDAP) server. Make sure you add the company name, department name to the customer properties in your ldap server. To activate Customer Organizational Unit mapping, select Yes for the Import Customer Organizational Units option (Setup->LDAP->Advanced) and map the attributes.By default this is not enabled.
    2. If you want to add Organizational units from with-in service desk then select Yes for Mixed Mode for LDAP/AD (Setup->Privileges->Customer)

  • I need to find out how to transfer all the music from my old IPOD to my new IPOD.  Not all of my music was purchased on ITUNES.

    I need to find out how to transfer all my music from my original IPOD nano to my new IPOD nano.   I want to keep both and not all of my music was purchased on ITUNES.  Please help!

    Your music should be in your iTunes library, that is how it gets synced to the iPod. If that music is not present in the iTunes library, you will need to get a 3rd party software for the computer to get the music off the original iPod and then move it to the iTunes library to be able to sync it to the new iPod. You can see some additional information in this tip supplied by a fellow user. Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Need to find out what has been modified to running-config

    Hello,
    When I enter the "reload" command, Cisco ASA 5510 asks me
    a question: System config has been modified Save? [Y]es/[N]o:
    All I did was issuing a few "show" commands before the "reload" command. I definitely need to find out what
    has been modified before the reboot
    Is there any way to find out what has been modified to the running configuration.
    Thanks!

    If you want to know when changes are made, but don't want to setup TACACS (and you have a syslog server setup), you can have the router syslog all commands entered while in config mode:
    devcorert01#conf t
    devcorert01(config)#archive
    devcorert01(config-archive)#log config
    devcorert01(config-archive-log-cfg)#hidekeys
    devcorert01(config-archive-log-cfg)#logging enable
    devcorert01(config-archive-log-cfg)#notify syslog
    Anytime someone enters any command while in config mode, the command will be sent to your syslog server.
    Examples:
    Jul 21 10:15:41 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:do sh run
    Jul 21 10:17:33 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:interface GigabitEthernet2/2
    Jul 21 10:17:38 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:shutdown
    Jul 21 10:17:42 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:no shutdown
    Note the "do show run". Even thought that is not a config command per se, it was entered while in config mode. Also notice the user is "console". If it was from a telnet session, you would see
    Jul 21 10:17:33 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:interface GigabitEthernet2/2
    Jul 21 10:17:38 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:shutdown
    Jul 21 10:17:42 EDT: %PARSER-5-CFGLOG_LOGGEDCMD: User:unknown user logged command:no shutdown
    Mike

  • Need to find manually implemented SNOTE

    I need to find the manually implemented sap note using transaction SNOTE.I want to filter out which are all the snote that the user has implemented manually .is there any table entry that can fulfill my requirement.
    Thanks in advance..

    Hello,
    unfortunately there isn't  a table that contains the items changed to the manual application of OSS notes.
    One approach might be:
    First SE95 (modification Browser) extract the list of CR and of all objects modified by the application of OSS notes using the Notes assistant
    Then check the SMODILOG table in SE16 with the following selection parameters:
      OBJ_NAME: Exclude single values: 'Z *', 'Y *'
      OPERATIONS: Exclude single values: 'TRSL' (Translations)
      TRKORR:
             Select single values: '<SY-SYSID> *' (first 3 char of your change request numbers) means that
             all the change requests with modifications implemented in your system ...
             Exclude single values: put in exclusion the CR numbers which refer to the notes impl.by Snote
    Take the numbers of CR from the SMODILOG extraction; use them with the report RSWBOSSR; remove user name and pick all request status checkboxes.
    Run the report.
    To locate the notes applied by hand among all the changes should be sufficient the description of the transport, otherwise you have to ask for information directly to those who have implemented the changes.
    Thanks in advance.
    Kind regards.
    Andrea

  • Identity service cannot find user

    Installed BPEL 10.1.2
    added user using jazn.jar
    Now trying to log into worklist sample application
    and I get identity service cannot find user. Do I need to assign any role(s) to new user.
    Let me know.
    I am seeing simple questions not getting answers. Is this an Active Forum?
    Thanks
    Raghu

    closed
    for OAS 10.1.2.0.2. & BPEL PM 10.1.2.0.2
    I Install BPEL in MiddleTire
    1. ./runInstaller
    2. home = OAS home
    3. tea
    4. emctl stop em
    emctl start em
    5. Oracle_Home\opmn\bin\opmnctl stopproc ias-component=OraBPEL
    Oracle_Home\opmn\bin\opmnctl startproc ias-component=OraBPEL
    6. if OID working throw SSL, then 7,8 else 9
    7. edit file Oracle_Home\j2ee\OC4J_BPEL\config\jazn.xml
         <jazn provider="LDAP" location="ldap://host:636" default-realm="us">
              <property name="ldap.user" value="cn=orcladmin"/>
              <property name="ldap.password" value="!welcome1"/>
              <property name="ldap.protocol" value="ssl"/>
         </jazn>
    8. edit file Oracle_Home\integration\orabpel\system\services\config\is_config.xml
         <BPMIdentityServiceConfig
         xmlns="http://www.oracle.com/pcbpel/identityservice/isconfig">
              <provider providerType="JAZN" name="oid" >
                   <connection url="ldap://host:636" binddn="cn=orcladmin"
                        password="welcome1" encrypted="false">
                        <property name="securityProtocol" value="ssl" />
                   </connection>
              </provider>
         </BPMIdentityServiceConfig>
    then 11
    9. edit file Oracle_Home\j2ee\OC4J_BPEL\config\jazn.xml
         <jazn provider="LDAP" location="ldap://host:389" default-realm="us">
              <property name="ldap.user" value="cn=orcladmin"/>
              <property name="ldap.password" value="!welcome1"/>
         </jazn>
    10. edit file Oracle_Home\integration\orabpel\system\services\config\is_config.xml
         <provider providerType="JAZN" name="oid" >
              <connection url="ldap://host:389" binddn="cn=orcladmin"
                   password="welcome1" encrypted="false"/>
              </connection>
         </provider>
    11. edit file Oracle_Home\j2ee\OC4J_BPEL\application-deployments\hw_services\orion-application.xml
         <jazn provider="LDAP" location="ldap://host:389" default-realm="us" >
              <jazn-web-app auth-method="SSO"/>
         </jazn>
    12. Oracle_Home\opmn\bin\opmnctl stopproc ias-component=OraBPEL
    Oracle_Home\opmn\bin\opmnctl startproc ias-component=OraBPEL
    II Deploy BPEL portlets
    1. throw EM add EAR to OC4J_BPEL:
         fie: $ORACLE_HOME/integration/orabpel/system/services/lib/bpelportlet.ear
         &#1072;. Parent app = orabpel
         &#1073;. User Manager = Use JAZN LDAP User Manager
    2. edit file Oracle_Home\j2ee\OC4J_BPEL\application-deployments\bpelPortlet\orion-application.xml
         <jazn provider="LDAP" location="ldap://host:port" default-realm="us" >
              <jazn-web-app auth-method="SSO"/>
         </jazn>
    3.Oracle_Home\opmn\bin\opmnctl stopproc ias-component=OraBPEL
    Oracle_Home\opmn\bin\opmnctl startproc ias-component=OraBPEL
    4. Register BPEL provider
         http://bpel_host:bpel_port/BPELPortlet/providers
         &#1072;. Login Frequency = Once Per User Session
    636 - OID SSL port
    389 - OID non SSL port

Maybe you are looking for