Need to firewire connect my G4 to new Intel (10.5 and 10.6)

I have a G4 (with 10.5) and a new Intel (10.6). I wish to quickly move my iPhoto folders from the G4 to the new iMac.
I have the proper fire wire cable.
How do I do this? Isn't there a special start up key - combo I do in order just to access each other's HD?
thx JON

Press the T key when starting up one Mac.
(52020)

Similar Messages

Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one. How, help?? Phone is a 3GS

Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one. How, help?? Phone is a 3GS

So the answer to my question is yes - from an old Exchange account that was provided by a previous employer.
If so, you can't.
You can't merge or transfer contacts that were synced over the air with an Exchange account with another account, and the same for syncing the contacts direct with a supported address book app on your computer. This is how most employers want it.

I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.

I tried to update my phone last night. When I woke up, it said it needed to be connected to iTunes. I restored my phone and now it won't turn on and keeps saying it needs to be connected to iTunes.

probably need pc or mac update for ios 6 on your home device

I own Logic Pro 7( I used to have a PowerPC and need to upgrade to Logic Pro 9 (new Intel chip, system 10.8) . Do I need to buy a whole new set or do I upgrade for less cost?

I own Logic Pro 7( I used to have a PowerPC and need to upgrade to Logic Pro 9 (new Intel chip, system 10.8) . Do I need to buy a whole new set or do I upgrade for less cost?

The cost of the Full Logic Pro 9 from the App Store is less than the cost of the discontinued Boxed Upgrade set for Logic Studio (if you could find one) ... so you might as well purchase the full Logic Pro 9 from the App store and be done.

I just purchased the new iMac. Need more firewire connections

24-inch, 2.8Ghz 2GB Ram. It's a great computer. Only thing is I need more firewire ports for hard drive, scanner and M-audio interface. We can't plug them in all at once. Any solutions out there? I wasn't impressed with the Apple Store's Belkin Firewire Hub. I could use an extra port for my ipod too.
What is the best solution?
Message was edited by: Maureen W.

Do any of your devices have multiple firewire ports so that you can daisy chain them? My external hard drive has two ports and happily works in this fashion allowing additional devices on the chain. I have not noticed any difference in speed.

Need Help Connecting Logitech Z560 to New Intel Imac

I am a newly converted PC user. Like most of us, I am amazed by my new Imac.
I have a Logitech 4.1 z560 speaker setup that I would try to use with the Imac, if possible. My problem is that the connection from the speaker "control center" is actually two 3.5" mini phono jacks. Since there is only one audio output on the back of the Imac, I cannot figure out how to make this work. I can plug in just one of the connections, but I only get stereo sound coming from the front two speakers. Here is a link to the manual for the Logitech speakers:
http://logitech-viva.navisite.net/web/ftp/pub/pdf/speakers/z560.pdf
The connections I am referring to are numbered "4" in the diagram - described as "Audio input cable to PC - green & black plugs". I would appreciate any help. Thanks!

Hi wextasy: I have a set of Logitech speakers similar to those, and they work quite well. The manual says, with a 2 Channel Sound system (iMac), you plug the Green plug into the output jack, and enable "M3D" to get best sound. It does a pretty good job of simulating 4 channel sound. The other "black plug" is unused in this situation.
Happy listening
Stedman

Needed help on connecting weblogic 8.1 SP5 with oracle 10g and mysql 5.0

Hi !!
Hope you are doing well...
Can anyone tell me how to connect weblogic 8.1 SP5 with an oracle 10g DB on windows..
also, how to connect weblogic 8.1 SP5 with mysql 5.0 on windows..
Please step by step... very urgent..
Thanks!! Jhonson

Shouldn't this be posted in BEA forums?
Try getting help there and if you encounter any Oracle related exception, you can post here.

New Intel graphics, OpenGL and CS6

Currently I'm using an iMac in my home studio but I need to buy a notebook this summer for work, and I'll be using Adobe CS programs so I'll likely have to upgrade to CS6. I'd like to buy a 2.4 GHz 13" MacBook Pro to save a little money (since I have a killer iMac), but I notice the MacBooks now have Intel integrated graphics instead of nVidia. How is OpenGL 2.0 implemented on the Intel graphics chip? Does it work o.k.? I have a chance to buy a late-model 15" MacBook Pro with the discreet graphics card for not much more money, but I don't think I can afford a new MacBook Pro with discreet ATI graphics.
I am looking for advice: Do photoshop and illustrator work well on the Intel graphics chip?

Hi tmazzullo,
I can answer your question with "It depends". I am having issues with non NVidia Graphics Cards while working in Mountain Lion with Illustrator CS6 and applying shadows / effects to text and objects. Everytime I am trying to do this, illustrator crashes.
If I use a Mac with NVidia it works without any problems. But Intel or Radeon cards force illustrator to crash. I tested this very often on all versions of Mountain Lion so far released an on several Macs. Same result every time.
Everything else I use in Photoshop or Illustrator works like charm. No problems at all. The Intel HD 4000 is faster than the NVidia 9600M GT in my old MacBook Pro.
I am designing almost every day in Photoshop and every two days in Illustrator. I have not tested the 3D functions much, so I cannot give you any advice for this.
If you are sure you are not applying effects to your objects in Illustrator, go for the small portables.
Hope this helped.
Edit:
I have opened a discussion concerning this issue. So maybe there will be an update one day.
https://discussions.apple.com/message/21739999

Can I transfer all my old os 9 fonts to my new intel imac? And if so, how?

Thanks in advance to all who can and will answer this question.
Needless to say I am a total newbie to OSX. Got a intel imac for Christmas (very lucky!!! Nice Santa!!)
Like it states below, I have been using a G4 in os9.2, and I have all these lovely fonts (Adobe and Trutype, etc.) That I am hoping to somehow use. I would hate to think that i have to purchase all new openface versions.
I have extensis fontDoctor 7.3, and rumor has it, it will convert fonts, is this true? And if so, how? And if not, does anyone know if there is an extention or software that will do this. Please Help!!!
Me and my wallet thank you again.
IMac Mac OS X (10.4.8) was running a older G4 in os9.2

From the article, I would think that your Postscript fonts should be supported just fine;
Mac OS X delivers industry-leading support for popular font formats:
• PostScript Type 1 (with double-byte support). Adobe PostScript fonts launched the desktop publishing industry and are used today by publishers, corporations, and government agencies for high-quality output to laser printers, imagesetters, and platesetters. Each PostScript font requires two files, one for the screen and one for use by the printer's RIP (raster image processor). Mac OS X is the only operating system that provides native PostScript Type 1 font support.
• OpenType. OpenType fonts (extension .otf) can contain 65,000 different glyphs, so type can be set in non-Roman languages such as Japanese, Chinese, and Korean. There are Macintosh- and Windows-specific OpenType formats; Mac OS X supports both.
• TrueType. TrueType fonts (extension .ttf) are typically used in home and office environments. A single file contains both screen and printer font information. Mac OS X supports both Macintosh- and Windows-specific TrueType formats.
• Multiple Master. This special type of PostScript font allows variation of one or more font parameters (such as weight) to create a large number of custom styles, also known as instances. Mac OS X can activate already created instances of Multiple Master fonts.
In your case aren't the Bitmap files the screen fonts, so you can wysiwyg the raaster files?
The classic environment still runs on the PowerPC Macs, many of which are also running Mac OS X 4.X. The article was addressed generally to all OS X users.
I have heard of Sheep Shaver to run the Classic OS 9 in emulation, but I gave up OS 9 in late 2001, so I have never needed to explore this option. Some have posted that it didn't work so well.

How can I delete my old Laptop from my iPhone (iTunes Wifi Sync) and connect it to my new Laptop

HI;
I have an iPhone 4S Factory Unlocked, up to date (iOS 6.0.1). I connect it to my Laptop named "The Love" via USB and opend iTunes and checked Sync over Wifi to enable this feature. Everything works great.
After a couple months I sold my Laptop and bought a new Laptop named "Raid", I did the smae steeps, connect it to my new Laptop via USB and opend iTunes and I checked Syn over Wifi to enable this feature and hit Apply, also I did the sync via USB cable and it works fine.
Now I want to sync via wifi, so I went to General --> iTunes Wi-Fi Sync --> here my iPhone still showing "Sync will resume when "The Love-PC" is available", Okay I sold it!! What I will do! I stock! does this mean I will need to find my old Laptop and buy it back????!!!!
I tried to do those steeps over and over, same result, my iPhone stock with the my old Laptop, It seems my iPhone liked my "The Love" Laptop
My question is:
How do I delete this setting? and connect it to my new Laptop?
All the best;

Well " even if I plugged it via usb" I meant that I did all the spteps, connect my iPhone via USB, Open iTunes, Check on Sync this device via WiFi, click on Sync, Unplug the iPhone.
Again I DO NOT HAVE AN ISSUE WITH THE USB OR SYNC MY IPHONE THROUGH ITUNES VIA USB
I HAVE AN ISSUE TO SYNC MY IPHONE VIA WIFI (WIRELESSLY), THAT IS MEAN SYNC MY IPHONE WITH ITUNES WITHOUT USING USB CABLE.
check this video:
http://www.youtube.com/watch?v=B-uQvtFnwLc
I am doing all the steps but mu iPhone alwayes shows this:
Thanks;

Is firewire connection possible

my 80 gig Classic came with a USB connection. My "Classic Classic" {2003} used a Firewire connection.
Problem:
The "new classic" would not mount using firewire. Is this "the way it is"?
UBS is fine if you can wait overnight. I mean it's only 25 gig and it's gonna take a while.
Is there a way have either an eMac or an iMAC DC see it thru Firewire?
Oh yeah: I downloaded the manual. Firewire shows up in the back under ..."Firewire is a copyright...."
Running the latest iPod firmware and the latest iTunes.
TIA
wbajr

USB 2.0 is pretty comparable in speed to Firewire, but my question is this: does anybody know why Apple chose not to incorporate Firewire into the newer ipods? I have a 5G ipod, but an older mac that does not have USB 2.0 ports- only USB 1 and Firewire. I can still transfer using USB 1 but it takes much longer. This is a major inconvenience, and it kind of boggles my mind that Apple would drop Firewire support for the ipod. It is their interface, after all, why not use it?

Need a firewire port

i have a touchsmart 300 pc and need a firewire connection . is there a port that can be installed?

Tjsmusic, welcome to the forum.
What is the full model of the computer? I believe that there is a PCI Express, Firewire, Mini-card that will work for you, but I want to make certain. I will review the specs once I have the the full model and let you know.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Yosemite won't Boot from External SSD with Firewire Connection

Seeking help, I boot from external SSD drives from my 2010 iMac. I recently installed Yosemite on an External SSD with a firewire connection and all went well with the installation and first boot. After completing set up and restarting my iMac Yosemite will no longer boot from the firewire connection it will boot to the loading bar and then get the dreaded Goest Buster Emblem, if I swap out the SSD to USB connection it boots normally. I have 6 SSD Drives with Mavericks and Lion installed on that will boot from the Firewire Connection. Any suggestions ?

Additionally when testing while the SSD is connected to a USB Connection and booted if I attach any firewire device they are not recognized or connected to the operating system.

HT201263 I don't have a computer, but my iPod is saying it needs to be connected to iTunes to complete iOS 8 update.

I have the newest generation iPod and I've been trying to do the iOS 8 update. It downloaded and then when I hit install, it powered my iPod down and then said it needed to be connected to iTunes. Recently, my laptop crashed and I lost all of my music. So now I am without a laptop and I can't sync my iPod to any other computer because I'm afraid I'll lose the 4,000+ songs I've gotten over the years. The iPod won't even turn back on now, all I get is the USB connect to iTunes. I'm not sure where to go from here.

If one of these programs will not kick the iPod out of recovery mode then yo will have to connect to iTunes and restore and thus erase the iPod.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
You may be able to get some info off the restored iPod by:
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
http://www.pcrecoverytools.com/ipod-data-recovery.html
Restore from backup if you have one:
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Has anyone created a 400Mbps firewire connection to a PC?

Has anyone been able to successfully create a 400Mbps firewire connection (as opposed to 100Mbps) between a Mac and a PC? I've been trying to connect my G4 1.5Mhz Powerbook (bought last May) to a HP Pavillion d4100e (AMD dual core processor) running the latest Windows XP Home Edition. The Powerbook's firewire bus says it can go up to 400Mbps. The 6ft firewire cable is supposed to deliver 400Mbps. The PC's card says it handles 400Mbps. It shows 400Mbps when the firewire cable is plugged into the PC, but not into the Powerbook. Yet, the moment the cable is also plugged into the Mac, the rate goes to 100Mbps. I've looked all over the web for an explanation but have come up w/ nothing.
Peter

Make that 1.5Ghz Powerbook...

Need to firewire connect my G4 to new Intel (10.5 and 10.6)

Similar Messages

Maybe you are looking for