Need to get regular BT Broadband before Infinity?
Hi everyone.
I live in a house divided into three flats. I've just moved from the middle one (flat 2) to the bottom one (flat 1). As there's no BT line in flat 1 I've decided to get BT Infinity in order to save that 130 pounds for installing a new line. Seems like I can't have it.
According to online checker I can get Infinity in flat 2, but not in flat 1. It's the very same house, same post code, same exchange.
I phoned BT, the guy from BT Infinity team confirmed the findings, said it's weird and forwarded me to "home move" team. The person I spoke to then said that as there is no line and they don't know what parameters the new line will have I need to get regular BT Broadband first and then upgrade to Infinity.
Is this step really necessary? Can't I have a solid line installed straightaway?
As it stands at the moment BT can not you can get Infinity. Put it the other way round, if they signed you up to Infinity and for some reason when the line is connected you can't get Infinity, you wouldn't be to well pleased.
Similar Messages
-
I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will be recognised... any ideas?
I just found that I can't Sync my Iphone either and it gave the same error code.... it must be a ITunes problem.
Message was edited by: stephenfromwandichicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
I need a help !!! Please ,I dropped my iPhone 5 in toilet and I didn't get fast maybe 5mins before I get it because I didn't notice drop it and it won't work now it's almost 1week I'm waiting it still it don't work ... But when I plug my charger it goes light and show up apple logo and die again I don't know what to do and it's so expensive here at Japan pls.. Help maybe there still way to get it work again
Thank you ,ReanAt this point it's clear that it's been damaged and will need to be take or sent to Apple for replacement.
Regards. -
Do I need to unlock my old iPhone before I get a new one?
My contract with AT&T was up in June and I'm planning to re-sign when I buy iPhone 5. I currently have iPhone 4, which I was planning to give to my niece who currently has one of those pay-as-you-go phones. (She will not be using it with any major carriers.)
My question is do I need to unlock my current iPhone 4 from AT&T before I buy iPhone 5? Or how would it work?It depends on which network your daughter is on. If it's Orange UK, then no the iPhone 4 will not need unlocking, but if any other network, including 4GEE or T-Mobile, then yes you will first need to get it unlocked.
That can be done by filling in this online form. -
I need to get the link where I can find the 4.0.1 download file. I was given a link to go to a library of folders where I can get it but my firefox 5.0 crashed before I could get there and I lost that link.
I forgot to delete my quicktime704.pkg file before I ran the 7.0 reinstall. Once I did that, the 7.0 and 6.5 reinstalls worked!
-
I need to get back to FF4. I did this in the past but lost the procedure. I need to get to FF4 so that Roboform tool bar works.
Thanks for the right fix.
By the way RF is now up to7.4.1
Also when the install of FF5 ran it said that the Roboform toolbar was incompatible and said there was no upgrade. That is what sent me searching for away back to FF4. So I didn't even look at RF's site believing there was no upgrade available. -
HT1420 need to get rid of old expired apple accounts before I can purchase new stuff
i need to get rid of old expired apple accounts from previous email addresses. how to do that?
Why would you keep creating new accounts?
Just change the e-mail address associated with the account.
Having more than one account will generally cause problems.
All purchases are always tied to the account from which they were purchased. -
Need to get rss/xml feed from itunes
I need to get an rss/xml feed of the albums I am selling on itunes -- to insert into an iphone app I am working on.
Any one know how to get this feed?If you had iTunes Match before all this happened, yes. Just log in, activate iTM and download the music. If you did not have iTunes Match prior to these incidents, no, it can not help you.
You should also be doing regular backups of your personal data to an extnal HDD. If you had a backup hue could simply restore it. -
New subscription BT broadband BT infinity
hi,
i'm moving in the next 2 weeks, if i put my new house number and postode in the infinity it shows i can only get 1.5meg and no infinity
but if i enter the details for the address 2 doors away, it says infinity is coming soon,
weird?
also if i get the normal bt broadband and infinity comes life can i move mid contract? or do i have to pay an penalty to upgrade?
would phoning BT help the situation and tell me if my new place can actually have infinity?Hi Spiky
Welcome to the forums.
Certainly sounds like interesting results from the checker.
After you have moved in when infinity becomes available you can upgrade with no penalties.
Hope this helps
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
From normal broadband to infinity
Ok, So on Friday 7th i switched from bt broadband to bt infinity.Before the engineer left he logged onto his handheld using my wireless connection and showed me a film and how there was no buffering.I logged on my pc and speedtest.net gave me a test of 31mb.
I was advised in next 3 days this would be up and down until it settled at the estimated speed i was given at around 64mb.So off he trots and i go out.When i get back i discover bb had dropped out.It came back on again and when i did a test it was at 0.2-0.4mbps..After phoning up i was told by bt this was because line was settling in for 3 days.
I am pretty sure that in this period the speed should not be this low..it is at the point where it is useless.I tried explaining this but got nowhere.It is now Sunday and no better.Download speedachieved during the test was - 18.19 Mbps
For your connection, the acceptable range of speedsis 16 Mbps-18.98 Mbps .
Additional Information:
IP Profile for your line is - 18.98 Mbps
Well not what they told me i would get if i switched to infinity, and not what i got after engineer left.
When i do test to see what my line is capable of it tells me a download speed of 62.8 mbps.When engineer left i was getting 32mbps.This was on wireless connection.I know i will loose some not being wired, but this result is pants compared to what i was told i would get and what i got in the first few hours of having infinity.
I have always used wireless and was getting 17mbps on old BT Total Broadband,so are they telling me by getting infinity i get a 2mb increase?
Great News! You can get superfast fibre optic BT Infinity
62.7Mb*
Download speed
20Mb*
Upload speed
This is the result of the BT Speedchecker and what made me go for infinity -
Help needed in getting the previous Quarter Data
Hello folks,
I have this procedure where i have to modify the current procedure in the following manner:
I need to get rid of the variables p_start and p_end so that i cannot see them in the crystal report and include the Frequency in the procedure to get the Data based on the Dates.
and Main requirement is" If the Frequency is Quarterly " it should get the previous quarter Data, if "Frequency is monthly" it should return the previous month data.Can anyone please let me know where shud i make changes. Am including the procedure for refernce. Any help is appreciated
Thanks a millioin,
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h(report_record in out cr_return_types.gen_cursor,
p_start string,
p_end string)
IS
v_startdate date;
v_enddate date;
BEGIN
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));
open report_record for
select --distinct r.recovery_id
r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
sum(nvl(r.amount, 0)) as amt_received,
nvl(sum(case
when r.amount >= 0 then
rd.fees
else
rd.fees * (-1)
end),
0) as fees,
ec.close_date, *001* commented
(case
when ec.close_date <= to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS') then
ec.close_date
else
null
end) as close_date, --*001* added
get_case_value(ec.event_id, ec.event_case_id, v_enddate) as case_value,
nvl(etl.fee_percent_flag, 'N') workmans_comp,
max(to_char(r.recovery_date, 'FMMonthYYYY')) Year_Month,
max(to_char(r.recovery_date, 'YYYYMM')) Y_M,
max(to_date(to_char(r.recovery_date, 'MMYYYY'), 'MM/YYYY')) date_MY
from recovery r,
recovery_detail rd,
event e,
client c,
branch_group b,
employer_group g,
event_case ec,
event_type_lookup etl
where r.event_id = e.event_id
and r.event_case_id = ec.event_case_id
and ec.event_id = e.event_id
and rd.recovery_id(+) = r.recovery_id
and r.recovery_date between v_startdate and
to_date(to_char(v_enddate, 'MMDDRRRR') || '235959',
'MMDDRRRR HH24MISS')
and e.client_id = c.client_id
and g.client_id = c.client_id
and b.client_id = c.client_id
and g.employer_group_id(+) = e.employer_group_id
and b.branch_group_id(+) = g.branch_group_id
and e.event_type_code = etl.event_type_code -- SST 130852 04/14/09
group by r.event_id,
r.event_case_id,
c.client_id,
c.client_code,
c.client_name,
b.branch_group_code,
b.branch_group_description,
g.employer_group_code,
g.employer_group_name,
e.client_policy_identifier,
e.date_of_incident,
e.event_type_code,
ec.close_date,
get_case_value(ec.event_id, ec.event_case_id, v_enddate),
nvl(etl.fee_percent_flag, 'N')
having sum(nvl(r.amount, 0)) <> 0
order by c.client_code,
b.branch_group_code,
g.employer_group_code,
r.event_case_id;
Edited by: user11961230 on Oct 20, 2009 9:02 AMuser11961230 wrote:
1. I want to get rid of the p_start and p_end. So how do i declare the v_startdate and v_enddate in the following part?
v_startdate := to_date(p_start, 'YYYY/MM');
v_enddate := last_day(to_date(p_end, 'YYYY/MM'));I'm not sure what you mean by "declare".
In PL/SQL, "declare" means state (at the beginning of a block) that there will be a certain variable with a certain name (such as v_startdate) and datatype (such as DATE). You're already declaring the variables v_startdate and v_enddate correctly, right before the BEGIN statement.
Declaring a variable is not the same as initializing it, that is, giving it a value for the first time. Your next question seems to be about initializing..
2. where exactly shud i include the logic that u have mentioned. sorry a dumb questionIn place of the two assignment statments that reference p_start and p_end.
3. This time am gonna use frequency instead of report_type so that i will get rid of the p_start and p_end from the procedure.Do you mean you want to pass an argument (called frequency) that tells if you want a quarterly or a mionthly report, just like the variable report_type in my example?
If so, replace report_type in my example with frequency.
I think you want something like this:
CREATE OR REPLACE PROCEDURE hcsc_recovery_report_h
( report_record in out cr_return_types.gen_cursor
, frequency IN VARCHAR2
IS
-- Declare local variables:
v_startdate date;
v_enddate date;
BEGIN
-- Initialize v_startdate and v_enddate, depending on frequency
IF frequency = 'QUARTERLY'
THEN
v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -3)
, 'Q'
v_enddate := TRUNC (SYSDATE, 'Q');
ELSIF frequency = 'MONTHLY'
THEN
v_startdate := TRUNC ( ADD_MONTHS (SYSDATE, -1)
, 'MM'
v_enddate := TRUNC (SYSDATE, 'MM');
END IF;
-- Subtract one second from v_enddate
v_enddate := v_enddate - ( 1
/ (24 * 60 * 60)
open report_record for
select --distinct r.recovery_id
r.event_id,
and r.recovery_date BETWEEN v_startdate
AND v_enddate
...When you post formatted text on this site (and code should always be formatted), type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.
Edited by: Frank Kulash on Oct 20, 2009 2:37 PM
Changed query to use BETWEEN -
Need Help with Linksys router broadband-b
I have a Linksys wireless-B broadband router for some reason it just went crazy on me. My wireless card is a wireless - G . Now when i had Verizon DSL i got this router and a USB wireless adaptor from verizon. I had the usb adaptor on my wife computer and the router and modem on my notebook for six months we had there dsl service until we moved to a nother city. Once we had all of our service's transfered to the new home we could not get verizon DSL there.
So for a nother six months we had to use dial up and being that we run a home business dial up was just not up to the task. Well we got rid of dish network just to get cable T.V. just to get the cable broadband service. That's when i got a wireless card for my notebook anyway for six months the network was working just fine with the router and my wireless card.
Until Sept this year just a few weeks ago the router started going crazy. Before my note book was config for windows to connect linksys was connecting and i would see all conection in the site survey, and my own network also. Until a few weeks a go my network would not show .
So i call linksys the have me download some up dated firmware that would not install on my notebook or my wife computer after being on the phone for hours with linksys they come to tell me that the router is ok and working alright after all the test and steps they took me through with the router. Linksys tells me that there is something wrong with my PCM slot on my notebook or either my linksys wireless card. Ok First of all i can pick up signal on other networks and go on line like the Hilton Hotel when i go in there parking lot, Second i can pick up othr networks and get on line that are not secured sometimes so this tells me that there is Nothing wrong with my PCMI slot or the wireless card.
Now i took my router across the street to a friend house and guess what he gets a signal off the router with his notebook but i can not and when we plug the router in the AC outlet the internet light was flashing like crazy and my wireless card was not even in my notebook so that tells me that someone close was pulling signal off my router but i cant.
Can someone please explain this to me i want to get another router wireless - G this time but if there is something that can be done to get this one working like it should that would really help.
The Notebook has been checked out and config and that works well when i hook the either net plug in from the modem the router was config as well but i just can't get a connected to the router when i use the wireless card.Yes press and hold the reset button in back for 30 seconds and release. Wait 10 seconds and power cycle the router. Now connect to 192.168.1.1 username blank, password 'admin'. Now try.
-
I need to know which update(s) I can apply to help stabalize the system.
Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here. -
I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
How do I do this?
(when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)Just to add to what ChrisJ4203 said. You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing. However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before. You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer).
After that you can sync your voice memos to your computer as mentioned earlier.
If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy. -
Help!!!!! I need to get iphoto lib off of hd which is running really slowly, and clicks rather more loudly than usual, how do i do this, im even on my iphone asking this! Computer also runs inly marginally faster in safe boot mode! Could the apple store help?
It certainly sounds like your harddrive is dying. I would Immediately backup your harddrive to an external USB or Firewire harddrive Before doing anything else. It just may save your data in time before you lose it all.
Hope this helps
Maybe you are looking for
-
I wanted to listen to some new music i added to my itouch, but when i looked, it said no content in the music section. So i connected to the computer and opened itunes. My device showed up and everything, my playlists and songs where still there, but
-
Failed to back flush in IDES 4.7 due to kp26 proplem
hi: I Failed to back flush in IDES 4.7, and afterwads i found it was due to a system problem with kp26 which should be patched with KH47012. I tried spam ,but failed.I could not proceed. any opinions will be appreciated. infomation below is from tran
-
Get IDOC number information from BD10 to be displayed
Hi, I want to make a report whr i m calling 'BD10' report by call transaction which is used for sending material master details through IDOCs.(msg type MATMAS). basic type matmas05. now user requirement is that we need to show materail number along w
-
Hierarchy Descriptions missing
Hi, I uploaded hierarchies into an info object which was successful. My problen is that when i check the hierarchy in BW in the infoobject it shows only node ids for the nodes and not the descriptions as shown in R/3. I've never loaded hierarchies be
-
Convert RH8 HTML Project to RH8 Word Project
Hello, I am new to this organization and taking over an existing RoboHelp 8 HTML online FlashHelp project. My supervisor has requested that I find out how to get our RH8 HTML project into a RH8 Word project, and after reading this forum and others, t