Need to import video from a DVD into iMovie... help?

I have super 8mm film already transferred onto DVD... It plays on my Mac, but I cannot for the life of me import it into usable clips!! Please help, frustrated and against a deadline, thought this would be easy... thx in advance.....

Download MpegStreamclip, it's free.
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Drop the DVD or TS folder on it and export to another format.
Also, this is the iOS version of iMovie (for iPhones and iPads) so you might want to look here from now on:
https://discussions.apple.com/community/ilife/imovie

Similar Messages

How do I import video from a dvd into iMovie '08?

Does anyone know how to do this?? The movie that I'm trying to import was created in iMovie on another Mac.....I burnt the movie onto a DVD, and I'm trying to import it into iMovie on a new Mac.
Any ideas or suggestions are very much appreciated!!

DVDxDV, VisualHub and MPEG Streamclip (free but requires $20 Apple Quicktime MPG-2 component) are three possibilities

Running on a mac osx 10.7.5 and need to import video from a dvd to edit on final cut X

running on a mac osx 10.7.5 and need to import video from a dvd to edit in on final cut X

I'd try Handbrake. Copy the Video_TS file from the DVD to the Desktop. Then use Handbrake to convert the file compatible with Final Cut X

How do I import video from Sony TRV22E into iMovie ?

How do I import video from Sony TRV22E into iMovie ?

Hi
Sony TRV22E - CAN ONLY export the VIDEO material via a FireWire Cable (iLinc)
Then Your Mac need eiter
- a FireWire port - or -
- a Thunderbolt port
if only Thunderbolt - Then You need a FireWire to Thunderbolt converter.
The USB- can only copy over the Still photos You also cam take with Your Camera. Will NEVER work for Video Export.
Yours Bengt W

Can you import video from a DVD? If so how

Can you import video from a DVD? I have some home DVD's made on my PC. My PC program (Roxio) allowed me to pull clips off of a DVD, but I can not seem to figure out how to do it with iMovie on my Mac.
Any help would be greatly appreciated!!!

Hi, I'll see if I can help. The only way I know of importing directly from iMovie off of a DVD is with a converter box hooked up to an external DVD player. However there are a few freeware programs you could try. One is Handbrake, with it you can convert your DVD into a MPEG-4 file, this is incredibly easy however the quality will be a little lower than that of a DVD. Another program is MactheRipper which will rip the entire DVD onto your hard drive but you will have to hunt through all the files to find the ones you want. I hope this helps.

How do i import music from a dvd into itunes

how do i import music from a dvd into my itunes? thanks....

This is a great question. I would also like to know about it. Anyone there to help???

Can someone pls. tell me how to import photos from a DVD into Photohop 7. thanks

How do I import photos from a DVD into my Photoshop 7?

Since Elements is different from Photoshop, I'll link you over to that forum so the experts there can sort it out for you.
Photoshop Elements

How to import videos from iphone 5c into windows vista

How can I import videos from my iphone into windows vista.

http://lmgtfy.com/?q=how+to+import+videos+from+iphone

Trying to import videos from my sony handycam imovie connects but nothing happens

Trying to import videos from my sony handycam. imovie searches and then nothing. I was able to import yesterday. SPoke to Apple Tech he said I just need to wait it out, have been waiting 3 hours?????

Trying to import videos from my sony handycam. imovie searches and then nothing. I was able to import yesterday. SPoke to Apple Tech he said I just need to wait it out, have been waiting 3 hours?????

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

I'll stay in this chat ... I answered in the other one ... I have a Sony digital Handycam ... from years ago. I just got the LaCie and I think I formatted it for only to be used on my Mac ... how should I go about reformatting it to be HFS Extended like you said?

When I import video from my iphone to imovie it doesnt look right, it makes everyone look wider and shorter. Is there a way to fix this?

When I import video from my iphone to imovie it doesnt look right, it makes everyone look wider and shorter. Is there a way to fix this?

This is close. I did a bit more digging I have found a few more things. It appears that the input dialog is a read once on connect and then it never updates. I had my iPhone connected to my Mac when I did my convert from FILMiC Pro to my Camera Roll. Just on a whim, I dissconnected my iPhone with FCPX open and then connected it again. This time when I opened up the Import window the movie I converted showed up. It appears my issue may have simply been related to the specific series of operations that I happened to use at the time I was trying to perform an import to FCPX.
One last item of note. There is a movie in my Camera Roll that FCPX still does not see. This was a movie shot by my son-in-law of my grandaughter on his iPhone and then it was sent, via message, to my iPhone. Obviously it is a highly compressed video of unknown compression and frame rate. Regardless, FCPX does not see this video. I'm guessing it is not a .mov quicktime file but some other format specific to imessage video.
Thanks for the help Russ. It at least pointed me in the right direction. I understand why no one else could comment as I'm guessing no one else has had an issue. A very subtle "feature".

Importing video from Canon DSLR into time line in Premiere elements 10

When I import video from the media files in premiere elements 10 on to the Time line,I get a message saying that the video is not a suitable format and do I want to change it to a suitable format or leave it as it is.If I go to change it then the video does not display on the editing monitor. How do I get round this?

You're right it should work .... but in practice not always.
You have the latest and greatest mac laptop but your camcorder is frankly a bit dated. So my suggestion is to give it the signal that it wants.
You might want to try this little puppy:
http://www.newegg.com/Product/Product.aspx?Item=N82E16812191015&nmmc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Adaptersand+gender+changers-_-SIIG+Inc--12191015
along with a standard 6 pin to 4 pin FW 400 cable. It might be choking on the faster FW 800. This is just a guess though.

Failure importing video from the Desktop in iMovie 2009?

When I attempt to import a folder of .MOV videos from the desktop into an existing project in iMovie 2009, it appears to go through the loading and importing steps, but the entire process and loading bar only occur for a matter of seconds, and no video appears to be imported.
I have tried importing the video as a new event, and the process happens the same way, this time creating a new event folder in the Event Library, but with nothing in it.
I have tried selecting only one video, also to no avail.
I have also tried to import videos formatted in .AVI, this failed.
Anyone had this issue, or know a fix/workaround? At this point I don't know how to import video from the hard drive into a new project at all. Dragging the files from desktop to event frame within iMovie does not work either.

Well, I think the 9-pin to 4-pin cable is the best way to go. Get your camera's power adapter out and plug the camera into the wall first. Once the camera's got power, put it into VCR/playback mode. Then also go into the Menus on the camera and also check your manual to make sure you are sending the video signal out through the firewire and not just through the RCA video jacks. I don't know if the GL2 has a control for the Firewire jack, but just double-check that to make sure it's turned on.
Now setup the Mac to recognize the camera. Shut it down completely and plug the firewire cable into the Mac. Make sure your camera hasn't gone to low power/sleep mode. Startup the Macintosh, when you see the desktop appear launch iMovie. Then go to File Menu > Import from Camera. And in that window that pops up it should list your GL2 in addition to the iSight webcam.

How do I import video from my dvd drive?

I made a video in an older version of iMovie sometime ago. I would now like to import that video again into iMovie to update it. I cannot figure out how to add the clips to my events from the DVD drive. I can't believe there is not a simple way to do this, although I may be too simple to figure it out!
Jerry

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

What Cable do I need to Import Video from a Mini DV Camera?

I have a canon xh a1, it calls for a IEEE1394 cable, I have the new mac desktops, I have no Idea what cable i need in order to import video?
Any ideas?

Or better still - this cable from monoprice.com. Only $5.52 compared to the Belkin cable at $29.95. I use these cables all the time, they are very well made and work perfectly. There's nothing magical about Belkin that makes their cable worth nearly 6x the price of the monoprice cables.

Need to import video from a DVD into iMovie... help?

Similar Messages

Maybe you are looking for