Need to include Warehouse stock into MRP

Hi Gurus,
We have an issue to include warehouse stock into MRP.
This is because We have stock in warehouse to cover the demand but the MRP creates line against the VSF.
Please help me to resolve this.
Is there any customizing chnages there for including the warehouse stock.
Thanks in advance.
Naveen.

Dear Naveen,
1) Normally we call un-restricted use stock as ware house stock.
2) you can check the same in MMBE
3) this stock is default considered by MRP in Net Req Calculation & Create Procurement Praposals
4) Coming to Block stock, if u want MRP to consider this stock then
5) Then Just Mark as Tick for Blocked stock in OPPQ & save
6) Then Run MRP system Consider block stock also in Net Req Calculation
Regards
kumar

Similar Messages

I need to include one workflow into another

I need to include one workflow into another
IAM try to include one workflow into another workflow, whether it is possible or not.
if it is possible means, give the step to perform this action and some sample logic

Hi,
You can achive this in a very simple way.
Create a activuty step. ( In general we need to create a task here )
Add/ paste the workflow template number insead of creating the Task.
Make the required binding.
Thanks and regards,
SNJY

Include QI stock in MRP

Hi there,
Please suggest me where I need to do the configuration so that the material in QI is considered as available in MRP run.......
Is it done in T-code OPJJ... I am not sure because as per my undertanding this check is done during the order creation as release......
Regards
Kaushik

Hi,
When mrp run system always consider QM stock for net requirement calculation.
You don't have option to include or remove the QI stock.
Option available for
1. Stock in transit
2. Blocked stock
3. Restricted use stock.
In OPJJ, this is only useful for availability check. Availability check is different from net req calculation ie, procurement or planning proposal.
Regards,
Dharma

How to include BSEG ANLN1 into OBCY selection.

Hi,
I need to include BSEG ANLN1 into selection of summarise FI Tcode OBCY. Appreciate some advise. TQ

Hi,
I am not convinced whether we can do it. The field names are stored in table TTYPS-FI Summarization: Document Fields Allowed.
Take the help of technical consultant and see if you can maintain the table entries there.
Aravind

Mrp requirement qty including safety stock

I have tested and got results as follows with VB/EX:
RO Point = 10 ea
Safety stock = 5 ea
Stock = 5 ea
But the mrp element generated for 5 ea only.
I need to get requirment qty considering the safety stock also.
HOW TO INCLUDE SAFETY STOCK IN REQUIREMENT QTY?
warm regards
marias

Hi,
the safety stock is relevant when you are carrying out goods issues.
the system will stop you from placing orders against the safety stock (because you don't want to sell this you want to keep it for emergencies) and yet it will allow you to goods issue to a delivery from safety stock (because that is why it is there, to ensure that you have spare items in case of shortages).
You control what can and can't issue safety stock by using different configurations for the availability checks for each function..
So even though the reorder point MRP seems to ignore safety stock it still warns you when you fall below this (with an exception message) and it is still used for goods issues and transfers etc.
Steve B

How is a distribution list created in 'Mail'? Everyone I need to include is already in my contact list so how do I copy them into a single list which I've created?

How is a distribution list created in 'Mail'? Every address I need to include is already in my 'Contacts', so how do I copy them into my single list?

In Contacts, add a new group, and then add all the desired recipients to the group.
Contacts – Create Mail Group

Availablity Check which includes Block Stock

Hi All,
I do have a problem with Availability Check.
For a material the Goods Reciept is made directly into Blocked Stock. Due to this the MRP is not considering the availability of the stock and creating the new PO for the old reqirement.
I want to know how we can configure the Availability Check so that it can consider the block stock into consideration during MRP run.
Thanks for the help in advance

hi,
To avoid the situation, you need to move the stock to unrestricted use...
Its correct, if we think logically then if there is req. for the material...then you can never use the block stock for the production etc...so, when the MRP runs, it doesnot consider the block stock...
Pls trasfer it to the unrestricted use stock..and then run MRP...
Hope it helps...
Regards
Priyanka.P

Adding Quality blocked stock in to warehouse stock

Hi All
I cannot find a way of adding Quality Restricted stock in to our warehouse in one movement.
Normally we use MB1A mvt 222 to add returned unused stock in to the warehouse with reference to a WBS. Then we use MB1B mvt 322 or 344 to quality restrict or block the stock.
I now have a need to return the stock in to the warehouse and quality restrict or block at the same time. I do not want to return the materials as unrestricted stock and then quality restrict/block them.
Any help would be greatly appreciated
Thanks in advance
Darren

You can achieve this with creating "scope of planning" in OM0E or special procurement keys
[MRP multi plants|http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2d4d44af11d182b40000e829fbfe/content.htm]

Warehouse selection in MRP

Customers using MRP wizard of SBO 2005A, have requested the ability to show MRP requirements by warehouse.
Currently at step 3 you can select the required warehouses, but the MRP wizard calculates the requirements for ALL warehouses, not just those warehouses defined at step 3.
It is my understanding that this is a missing functionality, and is being considered for inclusion in SBO V2007A but as yet has not been included.
Can someone advise if and when it will be inlcuded in either 2005A or 2007A, and if there is a workaround to this problem.
Kind regards
Nicola

Hello, colleagues!
We have a big challenge with MRP when the customer uses more than 1 warehouse.
He can't use MRP in this case and there is only one way - to look for heavy add-on.
If the customer has more than 1 warehouse in different locations, he can not use MRP for planning purchase orders, because B1 calculates the whole requirements. There are no filters for sales orders, minimum stock quantity, purchase and production orders.
Does it mean that SBO is a solution only for very small companies who has only 1 warehouse?
But marketing docs from SAP say: this is for small and midsize; even companies with few branches can use SBO...
I don't understand SBO positioning in this case.
Could anybody from SBO development team provide information about:
1) is SAP planning to make MRP working properly with several warehouses? This is strong business demand for lots of SBO customers;
2) why do you positioning SBO for wholesales if it does not support more than 1 warehouses? You offer MRP for booth only?
Thanks,
Alexey

MRP Area - Vendor Stock separate MRP

Dear Experts,
I would like to consult this solution. Currently we have a standard Subcon PO (MM). In this solution, we provide stocks to vendor via 543. Now, business doesnt want the vendor stocks to be included during MRP. How to set up?
Can I use MRP Area (subcon type) with this just like MRP Area for Slocs?
Appreciate your help. Thank you!

I reckon the business wants to see all the stock acquired though purchase made in that MRP area. Since they seemed to concerned about planning and may want to ignore the stock ordered manually (you need to confirm this with business). You may have to create SQL query to report this.
In the table EBAN, filter out all the values the field ESTKZ = 'B' and BERID = your MRP area (if BERID is empty you need to input all the storage locations assigned to that MRP area) and the field EBELN, EBELP, BSMNG contain the purchase order data created from the purchase requisition. You need to inner join that to the purchase order table, EKPO and inner join this to table EKBE (there you can find the material document also) and out put the quantity received.
Edited by: Jeevan Sagar on Oct 25, 2011 11:14 AM
Optional analysis: If you just want to analyze all the stock per MRP area input all the storage locations in MB5B

Follow-UP Material Functionality into MRP Run

Hi
i wanted to just know anout the Functionality of Follow up material into MRP run .
how it would be help in case of MRP run , if i will use Follow-up Material.
Rgds
Pankaj Agarwal

Hi
i wanted to just know about the Funtinality of Follow up material into Specialy MRP run.
Whether system will consider the parrallal Material Stock and Open PO if we are considering the
A (1 nos) FG is having X (1 nos) Material is current part and Y is followup material for the Same with Indicator 1.
Suppose X-200 nos and Y -700 nos (Open PO also 200 nos)
then after MRP run suppose for A FG requirment is 1500 than is system will consider the Y-700 + Y-200(Open PO) and give the PR for X is only 400.
Regards
Pankaj Agarwal

Need to include header in csv file while using GUI_DOWNLOAD

Hi,
Iam using GUI_DOWNLOAD for downloading certain texts,its working fine.now i need to include the header(i'e) some text say 'This is a error file'at the top.how can i do this?

REPORT ZTEST12347                              .
DATA: BEGIN OF ITAB OCCURS 0,
        VBELN LIKE VBAK-VBELN,
        POSNR LIKE VBAP-POSNR,
      END OF ITAB.
SELECT VBELN
       POSNR
      FROM VBAP
      UP TO 20 ROWS
      INTO TABLE ITAB.
DATA: IT_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE.
IT_LINE-TDLINE = 'this is error file'.
append it_line.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                = 'C:test.txt'
TABLES
    DATA_TAB                = IT_LINE
EXCEPTIONS
    FILE_WRITE_ERROR        = 1
    NO_BATCH                = 2
    GUI_REFUSE_FILETRANSFER = 3
    INVALID_TYPE            = 4
    NO_AUTHORITY            = 5
    UNKNOWN_ERROR           = 6
    HEADER_NOT_ALLOWED      = 7
    SEPARATOR_NOT_ALLOWED   = 8
    FILESIZE_NOT_ALLOWED    = 9
    HEADER_TOO_LONG         = 10
    DP_ERROR_CREATE         = 11
    DP_ERROR_SEND           = 12
    DP_ERROR_WRITE          = 13
    UNKNOWN_DP_ERROR        = 14
    ACCESS_DENIED           = 15
    DP_OUT_OF_MEMORY        = 16
    DISK_FULL               = 17
    DP_TIMEOUT              = 18
    FILE_NOT_FOUND          = 19
    DATAPROVIDER_EXCEPTION = 20
    CONTROL_FLUSH_ERROR     = 21
    OTHERS                  = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME                = 'C:test.txt'
    APPEND                  = 'X'
TABLES
    DATA_TAB                = ITAB
EXCEPTIONS
    FILE_WRITE_ERROR        = 1
    NO_BATCH                = 2
    GUI_REFUSE_FILETRANSFER = 3
    INVALID_TYPE            = 4
    NO_AUTHORITY            = 5
    UNKNOWN_ERROR           = 6
    HEADER_NOT_ALLOWED      = 7
    SEPARATOR_NOT_ALLOWED   = 8
    FILESIZE_NOT_ALLOWED    = 9
    HEADER_TOO_LONG         = 10
    DP_ERROR_CREATE         = 11
    DP_ERROR_SEND           = 12
    DP_ERROR_WRITE          = 13
    UNKNOWN_DP_ERROR        = 14
    ACCESS_DENIED           = 15
    DP_OUT_OF_MEMORY        = 16
    DISK_FULL               = 17
    DP_TIMEOUT              = 18
    FILE_NOT_FOUND          = 19
    DATAPROVIDER_EXCEPTION = 20
    CONTROL_FLUSH_ERROR     = 21
    OTHERS                  = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

File Adapter: need to include filename in content being written

I want to use the file adapter to write a file, using the filename convention to generate part of the name dynamically.
However, I need to include the filename used for the output file in the actual content too.
Any ideas if this can be done?
Thanks
Toby

At a customer we implemented the file adapter to create a file based on a specic name for appending:
<assign name="AssignStaticFilename">
<copy>
<from expression="'Output.csv'"/>
<to variable="gFileAdapterOutboundHeader" part="outboundHeader" query="/ns2:OutboundFileHeaderType/ns2:fileName"/>
</copy>
</assign>
In de FileAdapter WSDL we set:
<jca:operation
LogicalDirectory="OutputDirectory"
InteractionSpec="oracle.tip.adapter.file.outbound.FileInteractionSpec"
FileNamingConvention="%SEQ%"
NumberMessages="1"
OpaqueSchema="false"
Append="true" >
</jca:operation>
Does this help you, based on a given input to set the filename and this variable to put it into the file?

PE51/Form Editor for Payslip - Need to Include a digital signature

Hi,
I have the digital signature of the Manager of HR, and I need to include it in the payslip automatically.
The payslip was made by using de PE51 Form Editor, and I can´t find the way to include it.
I need to Know if there is a posibility to do this, using the PE51, or if I need to re-do the form in Sapscript.
Thanks for your answers.
Susana Quiroz.

I believe you do have to put it in a SAPScript form. I do not recall any way to put it directly into your HR Form through PE51. Our rem statement is printed using a combination of a SAPScript and an HR Form, so our electronic signature is just included in the SAPScript.
You might want to check your config to see if you already have a SAPScript assigned to your payment method. It is under: Financial Accounting --> Accounts Receivable and Accounts Payable --> Business Transactions --> Outgoing Payments --> Automatic Outgoing Payments --> Payment Method/Bank Selection for Payment Program --> Set up payment methods per company code for payment transactions.

Display Warehouse Stock in SAP EWM

Dear Experts,
Kindly let me know what is the transaction code to display Warehouse Stock in SAP EWM.
Thanks,
Shetty

Hi,
Indeed, the Warehouse monitor pretty much gives you all the information that you need. Do not forget that from time to time you need to update the stock data from the EWM to the ERP using the transaction /n/SCWM/ERP_STOCKCHECK - Stock Comparison ERP in order for the monitor from the EWM to be conclusive with the valuated data form ERP.
All the best,
Claudiu Maxim

Need to include Warehouse stock into MRP

Similar Messages

Maybe you are looking for