Need to increase output volume

I am recording a voice over and my audio is coming in at about -15db. After normalizing and using a compressor at about -5db, my levels peak between -5db and 0db. When i bounce down my track to an mp3 it is not coming out loud enough. How do increase the volume of my mp3? My mp3 will eventually be used on a website.

Hi EXP,
Before bounce, go to the "master fader" down, just above the click, select it,
Click and hold on Inserts arrow (or in the word itshelf) >logic express>mastering>choose the style you need.
This adds Gain, ChanEQ, Limiter, PresMultP, in a word, it's great for you to have a knolendge on how to do it.
Give it a try, in your case a only a Gain will do what you need, but play with the plug-ins to ear the diference for yourself or just bypass some.
best regards,
Jorge

Similar Messages

  • Increasing Output Volume?

    Hello all,
    I have a 15" macbook pro that I purchased over the summer. I've noticed that my volume doesn't go nearly as high as my friend's macbook pro, and he has an 13" model that is older than mine. Is there any way I can increase my maximum output volume? I have already adjusted my sound settings in system preferences, but there is nothing to make it louder. Is there something I'm missing here?
    Thanks

    If it's iTunes you're listening to, make sure the volume slider in the iTunes window is turned up all the way, then use the master volume controls (the F10, F11 and F12 keys) to regulate the volume. If the iTunes slider isn't up all the way, it limits the maximum volume that you can get by turning the master volume up. At least this has been my experience.

  • Need to increase master volume

    I just upgraded to a 5th generation iPod Nano from a 3rd. Even with the master volume on the new iPod set at maximum, I find the volume not quite loud enough. I use Bose ear buds. How can I increase the mater volume without adjusting each individual song in my iTunes library? Thanks for any advice!

    One discussion stated there is a undefeatable voume cap on the later generations of Nanos *mandated by European regulators* & Apple was complied.
    You live in Texas so that does not affect you. Unless there is a Texas in Europe I am unaware of!
    The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
    
If you do a forum search, you will find this same solution. If it does not work for your Bose buds, you will need to take your iPod to an apple store or call the Apple iPod tech support if still under warranty or you have Apple Care.
    Your other alternative is to contact Bose as was previously suggested.

  • Hearing impared I need to increase the volume or have it inhanced so I can hear it.

    HP Pavilion dv6 2300 windows 7 64/32 bit OS.  Issue I need assistance with is the volume, it is maxed out with the settings currently available.  Is there a software solution to this delima? I am hearing impared, wear hearing aids and still I cannot hear most of the music/vocals, or movie soundtrack.  Please help!
    Thank You
    Lucille
    This question was solved.
    View Solution.

    Hi Lucille,
    One thing that can sometimes help with the overall volume of the internal speakers is the following. 
    Right click the speaker icon in the Taskbar and select 'Playback Devices'.  Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button.  Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'.  Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
    Another useful ( and free ) software you may want to try if your music files are in MP3 format is MP3Gain.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Need to set output volume

    so using Au as a 2 track eiditor makes no sense that adobe dow not include slide to adjust volume
    the host app already has the hardware settings and Au plays too loud.
    I had to add an effect to the rack just to trim volume then set it back before returning to host app (hassle)
    soundforge and others have hardware slider featues -- add it!!!

    jjx wrote:
    the host app already has the hardware settings and Au plays too loud.
    I had to add an effect to the rack just to trim volume then set it back before returning to host app (hassle)
    soundforge and others have hardware slider featues -- add it!!!
    Audition isn't playing too loudly - your sound device settings are wrong, and Audition has no control over these. If you want the volume lower, then leave the Windows volume control, or whatever you are using, on the screen and use that. If you use effects to reduce the level of files, then you have created a non-standard file - and that's no approach to anything.
    Audition couldn't possibly put a hardware control slider in the app, simply because the majority of users use professional sound devices which have their own control panels, with their own individual control characeristics - and they are all controlled in a different way.

  • Increasing the volume on flv files

    I've got about 200 flv files have issues with volume. I need to increase the volume on each. Is their a quick and easy way. They all load into the one swf file so is there any code I can add to the swf the will automatically increase the volume of any flv thats loaded into it? Thanks

    If you use Netstream:
    var ns:NetStream=new NetStream();
    var nsst:SoundTransform=new SoundTransform(1);
    ns.play('filename.flv');
    ns.soundTransform=nsst;
    nsst.volume=2;//This alone will not change the stream's volume
    ns.soundTransform=nsst;// You have to reapply it by doing this again
    [source]

  • HT201401 Ringer volume is low to the point of missing calls. I need to increase volume !! HELP

    The volume on my Iphone 4s is very low. I miss a great deal of calls. Can anyone help me find a way to increase the volume.

    Did you try turning up the volume?

  • Whilst playing a selection from a CD I've put in my CD drive, I select Controls and then wish to increase the volume.  It tells me to Press Control and then Up.  Where is the Up button please ?  Thank you.

    My question is how do I increase the volume when playing a CD in iTunes.  The volume slide is at full, but when I press Controls, it tells me to press Control and UP.  Where is the UP on my PC or is it on the screen ??
    Thank you.

    It means the UP arrow on your keyboard. Depending on your keyboard, it is usually located on the right hand side of the keyboard, either with the numbers keys or below the Enter (Return) key.
    However, Control/Up will simply attempt to move the slider in your iTunes programme further up. If the slider is already at the top, then those keys will have no effect, since the iTunes volume is already at maximum. Perhaps your computer's volume controls need adjusting.
    In Windows XP, I believe (if I recall correctly) that the volume control is in Start/Accessories/ and either Volume or Mixer. In Windows 7, it's in Start/Control Panel/Hardware and Sound/Adjust Sytem Volume.

  • Linked media in interactive PDF has low output volume

    The link FV4 video in my exported interactive PDF produced in InDesign is practically inaudiable. The the audio in the stand alone quicktime video is fine.
    How can I increase the volume output in the interactived PDF?
    Thanks!

    There are no controls either in InDesign or in Acrobat Pro to change the volume associated with a video file.
    I've made many interactive PDF files from InDesign and the volume playing from the PDF is always exactly the same as when I previewed it in the Media panel in InDesign.
    Open up the Media panel in InDesign (Window > Interactive > Media) and preview the video there. I'd bet that it previews the same as when you play the PDF file.
    There must be something that was done in QuickTime to change the audio.

  • Output volume

    I have to reset  the output volume in my System Preference whenever I restart my computer because it reverts back to some default setting whenever I restart. How do I change this setting?

    Thanks, your message did help and gave me a little bit more knowledge about the world of sound which is becoming more complex than I ever imagined.
    But I want more volume.....
    I have tried using the volume enhancer preset (hiFi) from the inserts of the output track and this has increased my volume, but my RMS is still only getting to around -14.
    Any ideas on how to get more volume anyone?
    And by the way, am I doing the right thing by using the output track to control my final volume output? I have found that the master volume fader on my TASCAM-428 will also define the final level of my mp3 bounces, and that they are basically interchangeable in terms of controlling output levels.
    e.g. if i have everything all the way up and then pump my master volume fader on the Tascam to full, my file will distort.
    Thanks in advance (hopefully).

  • Increasing disk volume on DB

    Hi
    I have oracle 9i Rel2 installed on a test environment machine, i need to IMP new data from the server but i dont have enough disk space (1 HDD, 2 partition C: & D:)
    the DB is found on D: i am thinking of adding another disk and increasing the volume size of that partition.
    or
    if i copy all the oracle software from the partition and paste it on a newly installed HDD with drive letter D: (ofcourse i'll set a diff letter for the previous partition) would this work???
    Any suggestions or ideas?
    Thanks in Advance
    Regards
    Tony G.

    Hi ...
    It does not matter where is your datafile. It up to oracle server and its methodology to keeping the data in the datafiles. You just have to add a new disk space and create a datafile on that disk under the existing tablespace.
    Thanks
    Ali Mirza

  • How to increase sound volume in symbian S60 9.1 ?

    I have a problem, sound during calls on my mobile phone is low, even on MAX volume. It's ok in silent enviroment, but at street, coffee shop, bars, in some cases even when in car volume it just to low.
    I have Nokia E61i and this didn't happen with my last cellphone (Nokia N73) so my conclusion is that volume can be tuned up somehow.
    Is there any program to increase it or hack/patch of some kind?
    I don't need to increase strength of EXTERNAL speeker, just one used for calls.
    Thank you for assistence.

    Well recived my e61i today and the volume in the earpice is a dissapointment i mean its just enough meybe on the highest setting but that brings a distorted sound also i notice the sound is shallow ... did not expect that as i remeber my e61 (not an i model) had much better sound from the earpiece ...
    recently lotsa nokias suffer this , 8800 scirocco was a disaster the new 6300 also now this one cmooon guys !

  • Increasing headphone volume in Logic??

    How do I increase the volume coming through my headphones via my M-Audio Audio Interface while using Logic? The volume is cranked on the AI unit (for headphones), the recording levels are OK (not awesome), but the volume through the headphones is POOR.
    I go through my computer headphone outs directly when using Garageband (and the sound is AWESOME), but can't seem to do this with Logic. Nor can I use the AI for monitoring with GB (not that I want to right now with the volume being so poor through the AI).
    Any help is GREATLY appreciated.
    Thx!!
    J.
    Preferred solutions (in order):
    1. I can use my headphones through the Audio Interface for both Logic AND GB and the volume kicks ***
    2. I use the computer heaphone out for both and the sound kicks ***.
    3. I usethe AI sound for logix and the sound kicks ***, and I use the computer out for GB and the sound kicks ***.

    open the software that you installed for the M-audio interface (you will find it in the applications folder) ...click on the output tab... there should be volume faders for the headphones...also check if the output routing is correct
    Which M-audio interface are you using?
    A

  • How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume of all my faders ( ideally simultaneously.)

    How do I gang automation? ie. I need to reduce the volume on the master fader, so I need to reduce the volume on all my faders (ideally simultaneously.)

    Open the Mixer, select all the faders at once and lower 1 of them. the others will follow proportionally.
    Or you can just put a gain plugin in the master output and lowerr the gain coming to the masterfader.

  • How can I increase the volume of my text alerts without increasing call volume??

    The alerts that are pre-programed on my phone for text alerts are very quiet.  When I turn the volume up so that I can hear them then my call volume is embarrassingly loud.  I have tried to get new tones in the store but they all seem to download to my ringtone - not text tones.  I have even purchased (from the Verizon store) tones that are for texts, but again, they download into my call ringtones.  Any suggestions would be great since I am a big texter and am getting very frustrated because of missing so many.

        @Halon,
    I know how you feel! Text messaging is my main means of communication so I use it all the time. I definitely don't want you missing any important text messages because you can't hear the alert.
    Keep in mind that the volume level will increase or decrease the same for both calls and text alerts. You may notice that the ring tones options for the text messages are not as loud as the ones for calls. Unfortunately, there is no way to increase the volume for the text alerts without increasing the volume for the call alerts as well.
    One thing you can try is turning in the Vibrate mode so the phone vibrates also when you receive a text messages. Visit http://vz.to/1aflRJ0 for steps.
    Keep me posted if you need further assistance.
    JohnB_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for