Need to Increase the width of the selection screen

Existing scenario is that the selection screen contains 4 parameters in a row and
it has to be increased to 6.When i try to include the 2 parameters on the same row it
says that the max width is 79.I can try and reduce the width of each parameter but it
still cannot accomodate the 2 new parameters.
Can someone please give me some tips on how to go about it.

Hi Naveen,
SAP has 80 columns max for display on the screen.
if u want to accomadate more than six parameter the reduce the visible length.
example.
SELECTION-SCREEN : BEGIN OF LINE.
PARAMETERS : p_reg1 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg2 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg3 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg4 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg5 TYPE char20 VISIBLE LENGTH 12.
PARAMETERS : p_reg6 TYPE char20 VISIBLE LENGTH 12.
SELECTION-SCREEN : END OF LINE.
also see to it that u dont cross the limit of 80 columns
while writting the comments
example
SELECTION-SCREEN : COMMENT 4(10) text-006,
: POSITION 35.
PARAMETERS : p_sumrep RADIOBUTTON GROUP rad1 .
SELECTION-SCREEN : COMMENT 38(10) text-048,
Please Reward Points & Mark Helpful Answers
To mark Helpful Answers ;click radio Button next to the post.
RadioButtons
o Helpful Answer
o Very helpful Answer
o Problem Solved.
Click any of the above button next to the post; as per the anwers
To close the thread; Click Probelm solved Radio Button next to the post , which u feel is best possible answers

Similar Messages

How to increase the width of the Crystal Report

Hello All
How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
CrystalReports version 10.2.3600.0
Thanks in advance
Srivatsa

HI Srivatsa,
You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
Insert and Suppress a Cross-Tab
1. On the 'Insert' menu, click 'Cross-Tab'.
2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
3. Click the 'Customize Style' tab and select the following check boxes:
" Suppress Empty Rows
" Suppress Empty Columns
" Suppress Row Grand Totals
" Suppress Column Grand Totals
4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
====================
NOTES:
" As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
" To increase or decrease the number of virtual pages do one of the following:
- Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
- Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
====================
How to Insert Fields on Virtual Pages
You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
1. Insert the field on the main page.
2. Click the 'Preview' tab.
3. Drag the right edge of the field to the right, onto the virtual page.
4. Drag the left edge of the field to the right, onto the virtual page.
Hope this helps!!
Regards,
Shweta

How to increase the width of the drop down list box in SSRS multi value parameter

Hi,
I am using SSRS 2012. I have a parameter, which accepts multi value.
The width of the drop down list box is very small, and the user need to scroll to the right to view the complete view of the content in the list box. But, if I don't use multi value then the length is good. Kindly suggest how to I increase the width
of the list box when it set to multi value parameter.
Thanks in advance,
Mahalengam Arumugam

Hi Mahalengam,
After testing the issue in my local environment, I can reproduce it. When the values for a single parameter are too long, the drop-down list of the parameter will automatically enlarge to an appropriate size. While the values for a multiple parameter are
too long, we need to scroll to the right to view the complete view of the content in the list box in SSRS 2008. But in SSRS 2008R2 and SSRS 2012, we can directly drag the black control at the bottom of the list box to control the size.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Hi Katherine,
Thanks for your reply. I understood we need to drag the list box to a maximum size to view the contents.
But, this seems an additional task, i know this is a limitation in the current version of SSRS and hope it will be resolved in the next versions.
Thanks for your efforts,
Mahalengam Arumugam

How to increase the width of the column in Tableview

Hi ALL,
How to increase the width of the column in tableview?I have name column where big name is displaying in rows.Does any one have any idea how to increase the width of the column dynamically in tableview.Please respond its little urgent.
Thanks in advance

Hi Peter,
Here is my Dynpage
package com.ust.jcatotable;
import java.awt.Event;
import javax.resource.cci.MappedRecord;
import javax.resource.cci.RecordFactory;
import com.sapportals.connector.connection.IConnection;
import com.sapportals.connector.execution.functions.IInteraction;
import com.sapportals.connector.execution.functions.IInteractionSpec;
import com.sapportals.connector.execution.structures.IRecordSet;
import com.sapportals.htmlb.DropdownListBox;
import com.sapportals.htmlb.event.TableNavigationEvent;
import com.sapportals.htmlb.page.DynPage;
import com.sapportals.htmlb.page.PageException;
import com.sapportals.portal.htmlb.page.JSPDynPage;
import com.sapportals.portal.htmlb.page.PageProcessorComponent;
import com.sapportals.portal.ivs.cg.ConnectionProperties;
import com.sapportals.portal.ivs.cg.IConnectorGatewayService;
import com.sapportals.portal.ivs.cg.IConnectorService;
import com.sapportals.portal.prt.component.IPortalComponentContext;
import com.sapportals.portal.prt.component.IPortalComponentProfile;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
import com.sapportals.portal.prt.runtime.PortalRuntime;
public class Display extends PageProcessorComponent {
public DynPage getPage(){
     return new DisplayDynPage();
public static class DisplayDynPage extends JSPDynPage{
     private Object formatFlag;
     public static IConnection connection ;
     private IPortalComponentRequest request;
     private IPortalComponentContext context;
     private IPortalComponentProfile profile;
     private IPortalComponentResponse response;
     private int visibleRow=1;
     TableBean myBean;
     public void doInitialization(){
               response = (IPortalComponentResponse) this.getResponse();
               request = (IPortalComponentRequest) this.getRequest();
                context = request.getComponentContext();
                profile = context.getProfile();
                IPortalComponentProfile profile = context.getProfile();
                Object o = context.getValue("myBean");
                if(o==null || !(o instanceof TableBean)){
                   myBean = new TableBean();
                   setBeanFromProfile(profile, myBean);
                   context.putValue("myBean",myBean);
                 }else {
                   setBeanFromProfile(profile, myBean);
                    myBean = (TableBean) o;
                this.getData();
     public void myOnNavigate(Event event) throws PageException{
          TableNavigationEvent tne = (TableNavigationEvent) event;
          this.visibleRow = tne.getFirstVisibleRowAfter();
          if(myBean!=null)
          myBean.setVisibleRow(new Integer(this.visibleRow).toString());

How can I increase the width of the 'mail composer' box and put the attachment box (at present on the right) below it?

The width of the 'mail composer' box is too narrow so that with my email program half the buttons are missing.
== All the time

Thanks for your swift response.
I understand the difference between the web browser and email program.
I have just started using Firefox from IE and IE displayed the new mail page full width.
Firefox displays the reading web page full width but not the compose mail page because of the layout with the attachment box to the right of the box where you write your mail.
I was hoping that there was a way to customise and change the layout.
Is that possible?
Andy

I can no longer adjust the width of the Bookmarks Sidebar, how do I fix this issue?

In the past I could hover my mouse arrow over the slider vertical bar to the right of the sidebar and get a 2 headed arrow that I could use to adjust the width of the Bookmarks Sidebar but that stopped working. I need to fix this issue. What do I need to do?

Maybe something you installed to Firefox messed up that feature.
Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to Control the width of the Filter row in Table View

Hi !
I have a Table View with filter='application'. The filter works fine but I am not able to control the width of the columns of the tableview .
On filtering, if there are not items in the table view the columns shrink to the minum width....and it looks very odd.
Can you help me how to control the width of the Filter-Row in Table Veiw.
Thanks and Best Regards,
Bindiya

Hi Raja,
"FIXEDCOLUMN" did not help in the width of the column, but it just showed all the rows merged in the column.
I have a cloumn called "COUNTRY" and its width is set to "20". The Filter of the column "COUNTRY" is a dropdownlist whos value is update with new values.
On filtering if there is any row visible then the column width is adjusted to the maxmimum length of the dropdownlist ( this is because of the "EDIT" attribute in column definition ). But if there is no rows visiblel for the selected filter value then the filter row shrinks to the width = "20" and the dropdownlist is not visible completely.
Need to know how to control the width of the FILTER column.
Thanks and Best Regards,
Bindiya

Is it possible to fill the width of the browser without creating horizontal scrolling?

I'm trying to fill the width of the browser with placed images across the page so that they bleed off. But as soon as I reach the edge of the working area and then preview it just scrolls to show empty white space.
I'm trying to achieve the effect that if you're viewing on a wide screen monitor the you'll see all the images, but if viewed on a smaller monitor the images will just bleed off with no option to horizontally scroll.
Is it possible?

If I'm understanding your question correctly, create a rectangle at 100% width, either by clicking the 100% width icon or dragging the edges out to the edge of the browser space until the edge turns red. Now go to the Fill Panel and select Add Image. Choose your image. Set the location to Centre. Set the Fitting to Original Size - this will prevent the image from resizing with the browser. You'll need to make sure the images are wide enough to fill the screen, of course.

How to make a JPanel containing buttons take up the width of the window?

I'm creating a GUI and I have a button group that I want to be the width of the window. I have another JPanel on the same window that doesn't have a button group in it and it takes up the width of the window. I don't think I'm doing anything differently creating the two, but I need consistency.
The best way I can explain this is with code, so I created an example of what I am doing here:
import java.awt.*;
import javax.swing.*;
public class test extends JFrame {
     public test() {
          JPanel win = new JPanel();
          JPanel buttonsPanel = new JPanel();
          JPanel statusPanel = new JPanel();
          win.setLayout(new BoxLayout(win, BoxLayout.Y_AXIS));
          buttonsPanel.setLayout(new BoxLayout(buttonsPanel, BoxLayout.Y_AXIS));
          statusPanel.setLayout(new BoxLayout(statusPanel, BoxLayout.Y_AXIS));
//          createRadioButtonsPanel
          ButtonGroup buttons = new ButtonGroup();
          JRadioButton currentMap = new JRadioButton("option1", true);
          JRadioButton newMap = new JRadioButton("option2");
          JRadioButton noMap = new JRadioButton("option3");
          buttons.add(currentMap);
          buttons.add(newMap);
          buttons.add(noMap);
          buttonsPanel.add(currentMap);
          buttonsPanel.add(newMap);
          buttonsPanel.add(noMap);
          buttonsPanel.setBorder(
                    BorderFactory.createTitledBorder("Create: "));
//           createStatusPanel
          JLabel statusLabel = new JLabel("Loading...");
          statusLabel.setBorder(BorderFactory.createLoweredBevelBorder());
          statusLabel.setPreferredSize(new Dimension(400,20));
          statusLabel.setMinimumSize(new Dimension(400,20));
          statusLabel.setMaximumSize(new Dimension(400,20));
          statusPanel.add(statusLabel);
          JPanel statusButtons = new JPanel(new FlowLayout(FlowLayout.RIGHT));
          JButton pauseSearch = new JButton("Pause");
          JButton cancelSearch = new JButton("Cancel");
          statusButtons.add(pauseSearch);
          statusButtons.add(cancelSearch);
          statusPanel.add(statusButtons);
          statusPanel.setBorder(BorderFactory.createTitledBorder("Status: "));
          win.add(buttonsPanel);
          win.add(statusPanel);
          getContentPane().add(win);
          pack();
          setVisible(true);
     public static void main(String args[]) {
          test s = new test();
}When I compile and run this class I get this window:
http://img136.imageshack.us/img136/1538/exampleek5.png
You see how on the bottom, "Status" JPanel takes up the entire width of the window? When the window is resized, the border is also resized. I would love to have the top "Create" JPanel have the same behavior. How do I do this?
Thanks in advance!

It can get confusing when using the BoxLayout. The box layout takes into consideration the X alignment of the components as well as the minimum and maximum lengths.
So I suggest you read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/layout/box.html]How to Use Box Layout for examples and explanations on how these values are used in the layout process.
It may be easier to use a BorderLayout for the high level layout manger, since it will resize a components width when added to the NORTH, CENTER or SOUTH.

How to increas the width of the Table in OBIEE Report

Hi ,
I am creating a OBIEE report, the report has table and 30 column in it. When I am viewing the report in an excel file , its appearing good but the width of the table is so small if I am viewing the same in internet explorer/PDF .I dont know how to increase the width of the table. Could you please sort this issue out.
Thanks
Govindan P

- you can increase the width of a column -> column format values -> Additional Formatting Options
increase the width:
- Report level:
result tab -> Click on Format container of Table -> Additional Formatting Options
u can assign value width : 500 height:.....
- dashboard level:
Edit options -> section -> Format section -> Additional Formatting Options
here also u can change the width
u can assign value width : 500 height:.....
pls mark it helps....
Edited by: 979481 on Feb 6, 2013 1:25 AM

EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9.

EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9. This issue occurs for some users only.I tried the same url in google chrome and is working fine.
Can you please help.
Please find the attached screenshot.

Hi BJ1986,
According to your description, I think this issue is caused by the IE browser that runs the report. To trouble shoot this issue, I suggest that we can try to clear internet temporary files, cookies and others in IE browser. And also add this site
as a trusted site in IE browser to check this issue again.
If this issue is still existed, it can also be occurred due to the setting or third party add-ons of Internet Explorer (IE). In this scenario, you can try to run IE in compatibility mode to check the issue again. Or I suggest that you can refer to the
steps below to troubleshoot the issue:
Click Tools -> Internet options.
Switch to the Security tab, click Local intranet, and then select Default level.
Switch to the Advanced tab, and click Restore advanced settings.
Temporarily disable third party add-ons. For detailed steps, please see the link below:
http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
documents which contain some of their pages in landscape orientation.
publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
Thank you in advance.
Message was edited by: George Notaras
Improved descriptions of example documents.

To add to this, if you prefer you can separate your JavaScript from your JSF pages.
Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
(This can also be a URI reference to a JavaScript file hosted on a web server)
<f:facet name="metaContainer">
<af:resource source="/js/myJsFile.js" type="javascript"/>
</f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
A solution is to use <trh:script>.
Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
then in place of the above code use:
<f:facet name="metaContainer">
<trh:script id="script1" source="/js/myJsFile.js"/>
</f:facet>Now after a page submit the JavaScript still functions.
Edited by: Matthew Carrigy on 12/08/2009 10:39

How to change the width of the variable screen?

Hi
like in the subject mentioned i need to know how i can change the width of the variable screen....
right now i have to scroll if i want to see the right part auf the variable screen...
maybe i can change the width with css?

Hi,
Using CSS specify the table width for the variable screen and include the Css in the header section of the table.

How to get two parameters in the same line of selection screen?

hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?

hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1.

How to decrease the width of the border line of a table in smartform in 4.7

hi all,
i want to decrease the width of the border line of a table in smartform in 4.7 version. how can i do it? plz reply.

Hi,
When u r going to create a table in forms it will show the all details regarding the tables
like -> color
-> width etc...
From there u can do that .
u can also select the table format as all ready defined formats i.e available in he same screen.

Need to Increase the width of the selection screen

Similar Messages

Maybe you are looking for