Need to install OS X 10.3 on OS 9
I currently have OS 9 running on my MAC G4. I want to place OS X 10.3 on the computer without wiping away OS 9. I don't need to run it in Classic mode as I prefer to just go to the StartUp Disk Control Panel and switch back and forth from there. I have both the install disks for OS X 10.3 and OS 9. Thanks.
lucrative_angst:
Welcome to Apple Discussions.
OS 9x and OS X can co-exist very peaceably on the same volume/partition. If you already have an updated copy of OS 9 on your HDD, all you have to do is Archive and Install. Here are some directions:
If you have the Full Retail Version of Panther (or computer specific disks for your computer) here is what you do.
1. Warning: Although we will use Archive and Install there is always a risk something can go wrong. As a precaution back up your User Folder and any third party applications you can't afford to lose.
2. Check to see if you have the latest Firmware Update. (For firmware update for your computer post back with specs.) Note: You must be in OS 9 to update firmware
3. Boot from the install disk holding down the C key.
4. Once booted go to the Installer Menu and open Disk Utility.
5. Run Repair Disk. If there are problems, run it until no problems are reported. If it reports that it can't repair the problems you might need TechTool Pro or Disk Warrior.
6. While still in Disk Utility run Repair Permissions.
7. Quit Disk Utility and open the Installer.
8. Choose the option to Archive and Install. This saves your data in a Previous Systems folder, which you can retrieve after installation.
9. You might want to Customize and deselect Foreign Language Translations and Additional Printer Drivers to save Hard Drive space.
10. Proceed with installation.
11. After installation is complete computer will restart. Follow prompts and set up computer.
12. Open Disk Utility (Applications > Utilities > Disk Utility) and Repair Permissions.
13. Go online and download updates, or go to Software Update under the Apple Menu and update your OS.
14. Transfer your User Folder from Previous Systems folder.
If you want to a clean install from OS 9 disk, post back for directions.
Good luck.
cornelius
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS (10.4.4) Mac OS X (10.4.5) Beige G3 OS 8.6
Similar Messages
-
Do I need to install CS3 on Windows 7 64 bit before installing CS5 Upgrade?
I am replacing a graphic designer's Windows Vista laptop with a Dell Precision T5500 desktop. Do I need to uninstall CS3 from the laptop and decommission the serial number? Then do I need to install CS3 on the new desktop before installing the CS5 upgrade? I was told I needed to decommission the installation, but I don't remember having to do that with other installations. Thanks in advance!
You should definetly deactivate any software before uninstalling. But you don't have to install CS3 in order to install CS5. Just have the serial number handy for verification. That said, depending upon the user's needs, you might want to leave CS3 available.
Bob -
My daughter gave me a new Ipod (Nano) for Christmas. I had no problem download my songs from my old Ipod (Shuffle) to the new one. However - since I do not buy songs on a regular basis, I did not buy a new song until 4/29/13. Now for information...sometime in March my old laptop died, completely. I had to go buy a new one - which I did and this new one has Windows 8 Operating System on it (which I hate, btw).
Now, when I bout a song on Tuesday, the song did not go to my new Ipod. I tried everything and finally had to talk to a tech - who was very kind in helping me and we did get all my songs from Itunes to this new computer. I thought the song I bought would then go on the Ipod - but it did not. I had already hung up from the tech - since we had been talking on the phone for about an hour. He informed me that he was giving me a "courtesy break" because it has been over 90 days since my new Ipod was purchased ---- just my darn luck!
Anyway, I have figured out on my own that the new Ipod Nano is not synced with the new laptop with Windows 8. I have been trying for the last 2 hours to get it to do so and in doing so, found out that Windows 8 is not mentioned in any of the help forums. So...my question is: Do I need to install drivers on the computer or what? I will not be purchasing anymore music from Itunes until I get this matter resolved. Any help will be apreciated. Thank you.
Judy1942Try http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1165/187/how-do-i- move-my-catalog-photos-and-other-lightroom-files-to-a-new-computer
-
Reporting Services 2012 in SharePoint 2010 - do I need to install SSRS on each server?
Have spent some time today setting up SSRS2012 with SP1 Business Intelligence Edition on our test SharePoint 2010 farm. The SharePoint farm is four servers (plus a database) - one of the application servers will host the SQL Server 2012 instance and
SSRS 2012.
I've installed SSRS 2012 on one of the servers in SharePoint mode, and seems to be configured correctly in Central Admin - can view the system settings, it reports that the SQL Server Agent is running, etc. I've also installed the SSRS 2012 SharePoint
Add-In on all servers. However, I'm getting the following error whenever I try to do anything with reports (such as deploying or running):
Name=Request (POST:http://sharepoint/reports/ReportService2010.asmx) System.Runtime.InteropServices.COMException: The file you are attempting to save or retrieve has been blocked from this Web site by
the server administrators.
Sure enough, if I try to connect to that ReportService2010.asmx URL in a browser, I get the same error. Note that http://sharepoint is NOT the server I installed SSRS on - this is a web front-end.
Can I assume that I need to install SSRS2012 (SharePoint integrated) on all SharePoint servers in the farm? Or is this another issue?You only need to install the Add-on for the additional servers. Have you configured the SSRS Service Application?
http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Dimitri Ayrapetov (MCSE: SharePoint) -
Cannot print adobe documents ... Error message indicates a need to install plug-in for adobe reader.
Please advise how/where to locate the required adobe reader plug-in...
Thank you,
Joe CurcioWhat is the full and exact message you are getting?
If the PDF contains Rich Media, the Flash Player plugin may be required: http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe -
I have a fully paid subscription to CC and use of installed programs but I can no longer sign in to CC. It repeatedly says "You've been signed out". I have the need to install another program but I can't sign in.
Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html -
Do I need to install forms 6.0 & reports 6.0 on separate homes
Hello All,
I need to install Oracle developer suite 6.0 & Oracle Developer suite 10g on the same computer.
I have planned to install both on separate homes.
My question is that "Do I need to install forms 6.0 & reports 6.0 on separate homes?".
Regards,
DHello,
no, it is not necessary to Install Forms6i and Reports6i in a different Oracle Home.
Francois -
Satellite C855D-S5205 need to install win7 32bit
Dear All,
Please help me.. I need to install windows 7 32 bit on this laptop but not successful
and Now I've been delete Drive C: tell me some solution for solve this problem
Thank you in AdvanceHi! Go here!
https://support.toshiba.com/repair
You need to order the recovery discs and start over. Goodness people this is not Rocket Science! You need a media to install a operating System. Toshiba has given you all the tools to do these things. There is more than just knowing where the power button is. You can't just delete or formatt and exspect miracles. If you failed to create the recovery discs, then order them from Toshiba
Dokie!!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward. -
Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!! -
I am trying to download a book on my ipad. It says I need to install itunes. I have itunes already. I frequently get a message to re-install itunes. I do, but I still get the message, and I still can't get the book on my ipad.
you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads
-
I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go
Again thank you. If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email. That's my understanding anyway. Next will my existing .pst file copy directly into mac mail or do I have to runs translator as I recall reading something about that ages ago when I started thinking Mac
-
Error when running simulation with SIT 2010 on a cRIO 9073, what do I need to install on the cRio?
Hi.
I am trying to run a simulink model on a cRio 9073 using SIT 2010. I succesfully created the FPGA vi and the lvbit file in order to map input/outputs to the model. I also created the DLL and OUT for the model.
When I run the interface VI on my computer, everything seems OK, until I get the following error and I am not able to run the simulation. I found a similar post earlier that suggests that I need to install the shared variable engine or the Simulation Interface Toolkit on my cRio. I tried to do both using MAX but could not find neither of the suggested installations.
Thanks for the help!
Items.viNI_SIT_driversupportVIs.lvlibIT Probe Model Items.vi loaded with errors on the target and was closed.
LabVIEW: Failed to load shared library SITs.*robeSignals:C. Ensure that the library is present on the RT target. Use MAX to install NI software or FTP to transfer custom libraries to the RT target.
Items.viNI_SIT_driversupportVIs.lvlibIT Probe Model Items.vi loaded with errors on the target and was closed.LabVIEW: Failed to load shared library SITs.*robeSignals:C. Ensure that the library is present on the RT target. Use MAX to install NI software or FTP to transfer custom libraries to the RT target.Hola jarcTec;
Este tipo de error suena suele ocurrir cuando no se tienen las librerías apropiadas instaladas en el cRIO. Te recomendaría que abrieras MAX, debajo de la pestaña de Remote Systems selecciones tu dispositivo>> software, click derecho e instalar software. Aquí debes asegurarte que las librerías que te faltan estén instaladas en el cRIO. En Custom Installation selecciona SIT como opción para instalar en el cRIO tal y como se muestra en las imagenes.
Espero esta información te sea de utilidad
Exito en tu aplicación
Marisol -
I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still gives me the same mess
In the details it is mentioned that it is an outdated version of Java.
Is this a security risk that i need to live with to get CS5 to run with Yosemite?
Also i need to reject messages from Java in the future about updates, or not?
thx for any input -
To open "CS5ServiceManager" you need to install the legacy Java SE 6 runtime.
Recently updated to OSX Yosemite. Now every time I turn the computer on I get this message.
To open "CS5ServiceManager" you need to install the legacy Java SE 6 runtime.
I don't know what CS5ServiceManager is. And when I click on the "More Info" button, I am redirected to a blank screen. So I'm confused and a little worried. Is it necessary to install Java SE 6 runtime? If so, I think I can find the instructions on how to do it, but I'd like to know if (1) it is safe to do so and (2) if it's necessary.Here it is: Apple Java 2014-001. Quite safe to install. Only necessary if you are using Adobe's CS5 suite.
-
When I try and open adobe illustrator I get a pop up message saying "To open “Adobe Illustrator CS6” you need to install the legacy Java SE 6 runtime." it also says "Click “More Info…” to visit the legacy Java SE 6 download website." When i click more info it transfers me to an apple page which never loads, its just a blank page. I downloaded Java SE 6 like it says it needs but it did nothing. All of my other Adobe programs such as bridge, dreamweaver, lightroom, Photoshop, indesign, and flash all work except for illustrator. What can I do to fix this?
Go to Apple and look for the Java for OSX 2014-001 link. Download from there and install it.
-
To open "CS5ServiceManager" you need to install a Java SE 6 runtime. Won't install? Please advise.
Hi Apple Support Communities, I need some support.
After loading Mavericks with lots of happiness primarily to be able to use dictation, see my previous query. Since then I have also had this come up on my Macbook Air everytime I start it.
To open "CS5ServiceManager" you need to install a Java SE 6 runtime. Would you like to check for and install one? I tried yes (many times over many days).
Install.
Finding software. Can't download the software because of a network problem.
There is no problem with my internet connection & I have Java 7. My apologies that I am just a general user & not up with technical issues, would someone please enlighten me on what to do to fix or remove this error.
its now become a tiresome thing that together with not being able to use (download) the enhanced dictation & my imail/gmail problems that makes me wanna buy a PC next time. Major bummer.
Please help. Thankyou in anticipation.i had the same problem and i fix it installing ccleaner, it is free and an excellent program. You can download it from: https://www.piriform.com/ccleaner/download
Once installed, in the tab "Herramientas" (sorry but i have it in spanish) you choose "Inicio" and them you pick CS5ServiceManager then you pick in delete option. Basically you are removing of the startup programs...
Hoping to be helpful, and excuse my bad english!
Maybe you are looking for
-
Quicktime Broadcaster crashes after a few seconds
Hi This will probably be all too vague for a good answer but thought I'd ask anyway... Does have experience of Quicktime Broadcaster being unstable? I've tried using it with a USB webcam (logitech pro 9000) device that works fine with other apps on t
-
Hi everyone i am try to use ids:getUsersInGroup('name of the group', true,'remal name') function in order to retrieve the user names of a group and append them in the Users element of the related variable that is based on users element in identityser
-
Customzing Expose on dualmonitor setup
Hello, is it possible to customize Expose on 10.5 like that: I would like to have all application-windows on only 1 of my 2 screen while using Expose. Background: One of those screens (lets call it no. 2) is sometimes used by another device at the sa
-
Appleworks won't open, comes up with shared libray error?
for some reason my Appleworks has suddenly stopped working. It comes up with Shared libray error. "-<appleworks>MW_MSL.PPC.Shlb>Interface2ib>" which is gibberish to me. any Ideas????
-
I have a legacy software application that prints 4" x 6" output. It worked without issue on the HP Deskjet 6940. Unfortunately, it does not work with the newer HP Officejet 6000. The printer software reports "Paper Size Error". If I print on 8.5" x 1