Need to keep rebooting
I'm having an issue with Leopard on my Intel-based iMac but I'm not certain if I'm in the right forum. I've searched other strings and help documentation but didn't find an anything related to my issue so I thought I'd start here. When the computer has been idle for a while and I return to the computer I receive a message informing me that I must restart the computer. I find this very odd because, aside from reboots after a software upgrade, I have never had to reboot my iMac (granted, I've only had it a few month, but still...). This has just started happening and, as far as I know, we haven't made any updates or installed new software. Any idea what's happening?
Thanks, Tom. I'm using a wireless keyboard on this computer and the issue seemed to start after I replaced the batteries in the unit. I didn't turn the computer off before replacing the batteries so I had to go through the process of locating the keyboard again once the new batteries were installed. Could this be the problem? Outside of the wireless keyboard, wireless mouse and a set of speakers I really don't have any other hardware installed on the computer. Thanks.
Similar Messages
-
Why do I need to keep rebooting my iPad 2? I reboot it at least 5 times a day. I've deleted most of my Apps but the problem continues.
Use iTunes to restore your iOS device to factory settings - Apple Support
-
Re: my phone keeps rebooting, I need help!!!!
My curve 9320 keeps rebooting, I don't know what exactly has made it do that, everytime it loads, it reboots again, I have taken the memory I am very worried because I don't know what to do, please help thank you
Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice. -
I'm just trying to figure out if theres some other issue at play or if its normal for the phone to keep rebooting while searching for activation. I'd like to sell it this weekend but I don't want to sell a broken phone to someone. I researched this issue a bit online and only found a similar issue having to do with facetime/imessage but this seems to be different. I went through the necessary steps to fix the problem others were having, even though it didnt seem to be exactly the same as mine, but it is still happening. I will say that I got the iphone wet some time ago but it has worked fine since then so I'm assuming its not related. Perhaps the battery needs to be replaced? Any and all input or advice would be greatly appreciated. THANKS!
I should mention it is ios 6.1.3. The phone has now also started, after rebooting, showing the signal bars next to the wifi signal icon at the top but no "Sprint" type next to the bars as usual. And then after a few minutes it shuts down, shows the black screen with the white apple in the middle for a few moments, comes back up with the Waiting for Activation message, the signal bars pop up and the whole cycle just repeats itself.
-
My ipod touch keeps rebooting I restored from the back up it but it keeps rebooting,
My Itouch started rebooting, when i plugged it into itune it told me I needed to restore from back up after several attemps ( I received an error 9 message) I finaly got it to restore, but it just keeps rebooting!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mod
http://www.wikihow.com/Put-an-iPod-or-iPhone-into-DFU-Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable or another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just upgrade my ram to 16g from 4 and my mac mini keeps rebooting
i just upgraded my mac mini from 4 to 16 g of ram and now it keeps rebooting. Any idea what the problem could be or is it a hardware problem and how to tell?
1) It is Important to get the Correct and Matching RAM
Use this Link to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
The site also have videos on how to Install RAM should you need it...
423Milkman wrote:
i just upgraded my mac mini from 4 to 16 g of ram and now it keeps rebooting.
2) Check that the RAM is seated correctly.
3) Try it with only the Original RAM installed. -
My MBP keeps rebooting....!!!!
Hi guys I hope you will be able to help me
my mbp keeps rebooting every 15 minutes approximatively.
here is the kernel panic message :
Anonymous UUID: BE16E9B5-F3D8-4A31-A408-6D7BB900F9AB
Tue Mar 25 11:27:55 2014
panic(cpu 0 caller 0xffffff8005adbe2e): Kernel trap at 0xffffef7f8644d940, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef7f8644d940, CR3: 0x000000002406d000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0xffffef7f8644d940, RCX: 0xffffef7f8644d940, RDX: 0x0000000000000000
RSP: 0xffffff80f6e9bfb8, RBP: 0x0000000000000000, RSI: 0x0000000000000000, RDI: 0xffffff8020b92f78
R8: 0xffffff80060d2b30, R9: 0x0000000000000000, R10: 0xffffff80f6e9be20, R11: 0xffffff8006089ce8
R12: 0xffffff801777eb20, R13: 0xffffff801a054000, R14: 0xffffff80060d2ab8, R15: 0xffffff801a054028
RFL: 0x0000000000010246, RIP: 0xffffef7f8644d940, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef7f8644d940, Error code: 0x0000000000000010, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f6e9bc40 : 0xffffff8005a22fa9
0xffffff80f6e9bcc0 : 0xffffff8005adbe2e
0xffffff80f6e9be90 : 0xffffff8005af3326
0xffffff80f6e9beb0 : 0xffffef7f8644d940
BSD process name corresponding to current thread: Adobe Photoshop
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000005800000
Kernel text base: 0xffffff8005a00000
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 654837165862
last loaded kext at 269622262382: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f86a26000, size 65536)
last unloaded kext at 494781948647: com.lacie.driver.LaCie_RemoteComms 1.0.1 (addr 0xffffff7f86a3e000, size 8192)
loaded kexts:
com.oxsemi.driver.OxsemiDeviceType00 1.28.13
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.15
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleMuxControl 3.4.35
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.4.35
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.48f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500420AS, 500,11 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: iPhone
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: PTK-540WL
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:
Thanks in advance for your help !Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
While charging my new 9320 it keeps rebooting every few minutes
I upgraded to a BB Curve 9320. Today it is charging for the first time, but while charging it keeps rebooting, not continually but every few minutes. I already connected it to my computer which has Windows 7, to the Blackberry software and synced it with Contacts etc, but it is still rebooting. Anyone know what's wrong?
Hi and Welcome to the Community!
So, it only does this while charging, and only while charging on the wall charger? What about just charging to the PC? Or to a car charger? What about different wall/car chargers than those you already have?
In any event it is possible that your battery may be defective...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Factory Refurbished version, when i received it, and found it just keeps rebooting.
so i used a serial cable and get in CFE
use cmd " upgrade code.bin" to flash offical firmwire 1.04, it show succesful. but not working. still keeps rebooting.
can you take a look what is wrong with it.
here is the info from serial port, from start to rebooting.
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Mar 4 11:57:55 HKT 2011 (zhaoguang@sw1)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
This is a Serial Flash
Boot partition size = 262144(0x40000)
Found a 16MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.127.28 @VERSION_TYPE@
CPU type 0x19749: 500MHz
Tot mem: 65536 KBytes
CFE mem: 0x80700000 - 0x807A02F0 (656112)
Data: 0x80735600 - 0x80739640 (16448)
BSS: 0x80739640 - 0x8073A2F0 (3248)
Heap: 0x8073A2F0 - 0x8079E2F0 (409600)
Stack: 0x8079E2F0 - 0x807A02F0 (8192)
Text: 0x80700000 - 0x807355F4 (218612)
Boot version: v5.9
The boot is CFE
Flash base: bfc00000, mac start: 3ef00
mac_init(): Find mac [58:6D:8F:1D:3A:97] in location 0
Nothing...
No country code find
### CLKDIV= 0x20e0842, SFlashClkDiv=2 clkdivsf=2 ###
### Change it to 0x20e0842 (2) ###
Device eth0: hwaddr 58-6D-8F-1D-3A-97, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
cfe_led_init: start to set power LED and switch LEDs.
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 3731948 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22 (root@97026PC) (gcc version 4.2.3) #2 Tue Apr 10 19:05:47 CST 2012
CPU revision is: 00019749
Found a 16MB ST compatible serial flash
wombo_reset set to gpio 23
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
Normal 0 -> 16384
HighMem 16384 -> 16384
early_node_map[1] active PFN ranges
0: 0 -> 16384
Built 1 zonelists. Total pages: 16384
Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM5357 rev 1 at 500 MHz
Using 250.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 60220k/65536k available (2869k kernel code, 5260k reserved, 563k data, 212k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
PCI: no core
PCI: Fixing up bus 0
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
gpio_init: power pulse time 7
Register DIAG LED in /proc/sys/diag_blink.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
fuse init (API version 7.8)
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
loop: module loaded
PPP generic driver version 2.4.2
NET: Registered protocol family 24
pflash: found no supported devices
sflash: squash filesystem with lzma found at block 1800
Creating 4 MTD partitions on "sflash":
0x00000000-0x00040000 : "boot"
0x00040000-0x00ff0000 : "linux"
0x001c2154-0x00ff0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x00ff0000-0x01000000 : "nvram"
u32 classifier
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
edward ====to register conntrack protocol helper for esp:
nf_conntrack_rtsp v0.6.21 loading
GRE over IPv4 tunneling driver
nf_nat_rtsp v0.6.21 loading
edward =======nf_nat_proto_esp_init
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 212k freed
Warning: unable to open an initial console.
Failed to execute /init
ctmisc: module license 'unspecified' taints kernel.
Register /dev/ctmisc device, major:10 minor:255
cmd=[touch /tmp/var/lib/nfs/xtab ]
cmd=[chmod 644 /tmp/var/lib/nfs/xtab ]
cmd=[touch /tmp/var/lib/nfs/etab ]
cmd=[chmod 644 /tmp/var/lib/nfs/etab ]
cmd=[touch /tmp/var/lib/nfs/rmtab ]
cmd=[chmod 644 /tmp/var/lib/nfs/rmtab ]
cmd=[touch /tmp/var/lib/nfs/state ]
cmd=[chmod go-rwx /tmp/var/lib/nfs/state ]
cmd=[touch /tmp/disk_updating_lock ]
cmd=[chmod 644 /tmp/disk_updating_lock ]
cmd=[touch /tmp/file_variable_updating_lock ]
cmd=[chmod 644 /tmp/file_variable_updating_lock ]
cmd=[/sbin/hotplug2 --coldplug & ]
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
The boot is CFE
Algorithmics/MIPS FPU Emulator v1.5
/dev/: cannot create
cmd=[misc -t get_mac -w 3 ]
ctmisc_ioctl: cmd=0x11, buffer size=196
data_init(): base = 0xbc03ef00
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get MAC count is [1]
get_data(): MAC 0: [58:6D:8F:1D:3A:97]
get_data(): done
cmd=[misc -t get_wsc_pin -w 3 ]
ctmisc_ioctl: cmd=0x26, buffer size=196
data_init(): base = 0xbc03fcdc
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get WSC count is [1]
get_data(): WSC 0: [71674483]
get_data(): done
cmd=[misc -t get_sn -w 3 ]
ctmisc_ioctl: cmd=0x15, buffer size=196
data_init(): base = 0xbc03fe30
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get SN count is [1]
get_data(): SN 0: [10B10C16103018]
get_data(): done
cmd=[misc -t get_country -w 3 ]
ctmisc_ioctl: cmd=0x2c, buffer size=196
data_init(): base = 0xbc03fe20
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get COUNTRY count is [0]
get_data(): done
cmd=[misc -t get_2g_country_code -w 3 ]
ctmisc_ioctl: cmd=0x2e, buffer size=196
data_init(): base = 0xbc03fe10
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get 2G_COUNTRY_CODE count is [0]
get_data(): done
cmd=[misc -t get_5g_country_code -w 3 ]
ctmisc_ioctl: cmd=0x5e, buffer size=196
data_init(): base = 0xbc03fe00
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get 5G_COUNTRY_CODE count is [0]
get_data(): done
cmd=[misc -t get_flash_type -w 1 ]
ctmisc_ioctl: cmd=0x17, buffer size=196
sflash_init: sflash type 0x100
sflash_init: sflash type 0x17
Flash Type: SFLASH 16384 kB
tallest:=====(ctmisc ioctl done...)=====
Get FLASH TYPE is [SFLASH 16384 kB]
cmd=[misc -t get_pa2ga0idxval -w 3 ]
ctmisc_ioctl: cmd=0x28, buffer size=196
data_init(): base = 0xbc03f6c0
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA2GA0IDXVAL count is [1]
get_data(): PA2GA0IDXVAL 0: [11 -428 8175 -1979]
get_data(): done
cmd=[misc -t get_ctmisc_ioctl: cmd=0x2a, buffer size=196
pa2ga1idxval -w data_init(): base = 0xbc03f600
3 ]
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA2GA1IDXVAL count is [1]
get_data(): PA2GA1IDXVAL 0: [9 -410 7973 -1911]
get_data(): done
2G idx[11] w0a0[-428] w1a0[8175] wctmisc_ioctl: cmd=0x38, buffer size=196
2a0[-1979]
2G idata_init(): base = 0xbc03f4c0
dx[9] w0a1[-410]data_init(): location = [1], mydatas index = 1
w1a1[7973] w2a1ctmisc_ioctl: index=1
[-1911]
cmd=[mitallest:=====(ctmisc ioctl done...)=====
sc -t get_pa5gha0idxval -w 3 ]
get_data(): Get PA5GHA0IDXVAL count is [1]
get_data(): PA5GHA0IDXVAL 0: [0 -323 6175 -1379]
get_data(): done
ctmisc_ioctl: cmd=0x3a, buffer size=196
cmd=[misc -t getdata_init(): base = 0xbc03f400
_pa5gha1idxval -data_init(): location = [1], mydatas index = 1
w 3 ]
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GHA1IDXVAL count is [1]
get_data(): PA5GHA1IDXVAL 0: [1 -327 6085 -1372]
get_data(): done
5G high idx[0] w0a0[-323] w1a0[6ctmisc_ioctl: cmd=0x3c, buffer size=196
175] w2a0[-1379]data_init(): base = 0xbc03f980
5G high idx[1]data_init(): location = [0], mydatas index = 0
w0a1[-327] w1a1ctmisc_ioctl: index=0
[6085] w2a1[-137tallest:=====(ctmisc ioctl done...)=====
2]
cmd=[misc -t get_pa5gha2idxval -w 3 ]
get_data(): Get PA5GHA2IDXVAL count is [0]
get_data(): done
Using default 5G high PA2 value
cmd=[mctmisc_ioctl: cmd=0x48, buffer size=196
isc -t get_pa5gldata_init(): base = 0xbc03f2c0
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GLA0IDXVAL count is [0]
get_data(): done
cmd=[misc -t get_pa5gla1idxval -w 3 ]
ctmisc_ioctl: cmd=0x4a, buffer size=196
data_init(): base = 0xbc03f200
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GLA1IDXVAL count is [0]
get_data(): done
Using default 5G low PA0 value
Using default 5G low PA1 value
cmd=[misc -t get_pctmisc_ioctl: cmd=0x4c, buffer size=196
a5gla2idxval -w data_init(): base = 0xbc03f8c0
3 ]
data_init(): location = [0], mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GLA2IDXVAL count is [0]
get_data(): done
Using default 5G low PA2 value
cmd=[misc -t get_pa5ga0idxval -w 3 ]
ctmisc_ioctl: cmd=0x58, buffer size=196
data_init(): base = 0xbc03f0c0
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GA0IDXVAL count is [1]
get_data(): PA5GA0IDXVAL 0: [5 -381 6478 -1507]
get_data(): done
cmd=[misc -t get_pctmisc_ioctl: cmd=0x5a, buffer size=196
a5ga1idxval -w 3data_init(): base = 0xbc03f000
data_init(): location = [1], mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GA1IDXVAL count is [1]
get_data(): PA5GA1IDXVAL 0: [7 -374 6543 -1519]
get_data(): done
5G middle idx[5] w0a0[-381] w1a0[6ctmisc_ioctl: cmd=0x5c, buffer size=196
478] w2a0[-1507]data_init(): base = 0xbc03f800
5G middle idx[data_init(): location = [0], mydatas index = 0
7] w0a1[-374] w1ctmisc_ioctl: index=0
a1[6543] w2a1[-1tallest:=====(ctmisc ioctl done...)=====
519]
cmd=[misc -t get_pa5ga2idxval -w 3 ]
get_data(): Get PA5GA2IDXVAL count is [0]
get_data(): done
Using default 5G middle PA2 value
Cannot find lang from /proc/mtd
ret = -1
www -> /www
mount: No such file or directory
cmd=[insmod emf ]
cmd=[insmod igs ]
cmd=[insmod ctf ]
cmd=[insmod /lib/ufsd.ko ]
Needed modules: et wl ip6t_frag ip6t_ipv6header ip6t_ipv6range
cmd=[insmod et ]
cmd=[insmod wl ]
cmd=[insmod ip6t_frag ]
cmd=[insmod ip6t_ipv6header ]
cmd=[insmod ip6t_ipv6range ]
cmd=[insmod usbcore ]
cmd=[insmod usb-storage ]
cmd=[insmod ehci-hcd log2_irq_thresh=3 qtdc_pid=48407 qtdc_vid=2652 qtdc0_ep=4 qtdc0_sz=0 qtdc1_ep=18 qtdc1_sz=10 ]
cmd=[insmod ohci-hcd ]
cmd=[insmod wl_high instance_base=1 ]
eth2: No such device
wl0 not up in 3 sec
cmd=[insmod sxuptp_wq.ko ]
cmd=[insmod sxuptp.ko ]
cmd=[insmod sxuptp_driver.ko ]
cmd=[insmod jcp.ko ]
cmd=[insmod dnshook ]
Failed trying to open `/proc/mdstat': No such file or directory
Failed trying to open `/proc/sestat': No such file or directory
Failed trying to open `/proc/mdstat': No such file or directory
Failed trying to open `/proc/sestat': No such file or directory
Hit enter to continue...The chipset is 47186 with a 53125 gigabit switch
[sighandler]: Obtained SIGINT, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
[sighandler]: Obtained SIGINT, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
[sighandler]: Obtained SIGINT, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
[sighandler]: Obtained SIGINT, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
[sighandler]: Obtained SIGINT, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
[sighandler]: Obtained SIGINT, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
cmd=[killall httpd ]
killall: httpd: no process killed
waitpid: No child processes
killall: check_http.sh: no process killed
cmd=[killall gn-httpd ]
killall: gn-httpd: no process killed
cmd=[killall gn-httpd ]
killall: gn-httpd: no process killed
waitpid: No child processes
cmd=[killall wm-httpd ]
killall: wm-httpd: no process killed
waitpid: No child processes
cmd=[et robowr 0x02 0x06 0x001000a0 ]
cmd=[resetbutton ]
waitpid: No child processes
cmd=[vconfig set_name_type VLAN_PLUS_VID_NO_PAD ]
cmd=[vconfig add eth0 1 ]
cmd=[vconfig set_ingress_map vlan1 0 0 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 1 1 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 2 2 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 3 3 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 4 4 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 5 5 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 6 6 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan1 7 7 ]
waitpid: No child processes
cmd=[vconfig add eth0 2 ]
cmd=[vconfig set_ingress_map vlan2 0 0 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 1 1 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 2 2 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 3 3 ]
cmd=[vconfig set_ingress_map vlan2 4 4 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 5 5 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 6 6 ]
waitpid: No child processes
cmd=[vconfig set_ingress_map vlan2 7 7 ]
waitpid: No child processes
cmd=[brctl addbr br0 ]
cmd=[brctl setfd br0 0 ]
waitpid: No child processes
cmd=[brctl stp br0 dis ]
expect on/off for argument
waitpid: No child processes
cmd=[brctl addif br0 vlan1 ]
waitpid: No child processes
br0: No child processes
cmd=[wlconf vlan1 up ]
vlan1: Operation not supported
Write wireless mac successfully
cmd=[brctl addif br0 eth1 ]
br0: No child processes
cmd=[wlconf eth1 up ]
eth1: Operation not supported
eth1: Operation not permitted
interface eth1: channel selected 1 (renew)
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
cmd=[brctl addif br0 eth1 ]
device eth1 is already a member of a bridge; can't enslave it to bridge br0.
waitpid: No child processes
Write wireless mac fail : : No such device
cmd=[brctl addif br0 eth2 ]
interface eth2 does not exist!
eth2: No such device
cmd=[brctl addif br0 eth3 ]
interface eth3 does not exist!
eth3: No such device
Set 1 to /proc/sys/net/ipv6/conf/br0/forwarding ...
wl: wl driver adapKernel panic - not syncing: Attempted to kill init!
ter not found
URebooting in 3 seconds..pdate [-428] to [0xfe54]
Update [8175] to [0x1fef]
Update [-1979] to [0xf845]
Update [-410] to [0xfe66]
Update [7973] to [0x1f25]
Update [-1911] to [0xf889]
Update [-323] to [0xfebd]
Update [6175] to [0x181f]
Update [-1379] to [0xfa9d]
Update [-327] to [0xfeb9]
Update [6085] to [0x17c5]
Update [-1372] to [0xfaa4]
Update [-381] to [0xfe83]
Update [6478] to [0x194e]
Update [-1507] to [0xfa1d]
Update [-374] to [0xfe8a]
Update [6543] to [0x198f]
Update [-1519] to [0xfa11]
Restoring Storage Nvram Defaults
signalling STOP
Make date==>Year:12,Month:4,Day:10
Firmware version =>v1.0.04
signalling STOP
signalling STOP
signalling STOP
sum3=10679296 garbage=992 n=1024
MD5=[8ef631c90b58a3b4e051ca06072bbc4a]
signalling STOP
WARNING: console log level set to 1
name=[vlan1] lan_ifname=[br0]
name=[eth1] lan_ifname=[br0]
name=[eth2] lan_ifname=[br0]
name=[eth3] lan_ifname=[br0]
Please stand by while rebooting the system...part 2
wl1_bcn_rotate=1
wsc_config_method=pin
storage_group_desc7=
switch_netmask=0.0.0.0
usb/0xBD17/mcs5gpo5=0x0000
storage_group_desc8=
usb/0xBD17/mcs5gpo6=0x0000
usb/0xBD17/pa5ghw2a0=0xfa9d
wl_wps_reg=disabled
sel_qosport1=0
storage_group_desc9=
usb/0xBD17/mcs5gpo7=0x0000
usb/0xBD17/pa5ghw2a1=0xfaa4
filter_mac_grp10=
wl0_wds=
ipv6_filter=on
sel_qosport2=0
mount_disk_result=0
ppp_static_ip=
wl1_widechannel=0
sel_qosport3=0
log_level=0
wl1_wme_sta_be=15 1023 3 0 0 off off
tunnel_prefix_len=0
block_java=0
forward_portsip=
ddns_service=dyndns
sel_qosport4=0
storage_group_access20=
ct_modules=
ntp_server=
wpa_gtk_rekey_24g=3600
wl0_reg_mode=off
wl1_closed=0
sel_qosport5=0
storage_group_access21=
wan_hwaddr=
wps_mfstring=Cisco
wl1_bss_enabled=1
lan_ipv6_dns=
sel_qosport6=0
storage_group_access0=0
storage_group_access22=
QoS_cnt=0
wep_5g=disabled
sel_qosport7=0
storage_group_access1=1
storage_group_access23=
get_pa5gla1idxval_index=0
lan_ifnames=vlan1 eth1 eth2 eth3
wl1_akm=
wl1_reg_mode=off
lan_ipv6_dns_primary=
sel_qosport8=0
storage_group_access2=
storage_group_access24=
ftp_share_folder_0=
usb/0xBD17/pa05gidx=5
pppoe_ifname=
hwaddr_24g=
storage_group_access3=
storage_group_access25=
ftp_share_folder_1=
wl_40m_disable=0
wl0_auth=0
wl0_radius_port=1812
wl0_wme=on
wl0_mac_deny=
wl1_wme_sta_bk=15 1023 7 0 0 off off
wan_ipv6_renew=0
storage_group_access4=
storage_group_access26=
tunnel_status=disconnected
ftp_share_folder_2=
passphrase_5g=
tunnel_br=
blank_disk_info=
storage_group_access5=
storage_group_access27=
ftp_share_folder_3=
wl0_radius_ipaddr=
wl0_wme_bss_disable=0
wep_gen_5g=
wl1_radio=1
all_partitions_share=1
storage_group_access6=
ftp_share_folder_4=
pppoe_service=
auth_type_5g=0
wep_bit_5g=64
wl1_mac_deny=
storage_group_access7=
ftp_share_folder_5=
wl_country=US
ure_disable=1
wl0_wme_sta_vi=7 15 2 6016 3008 off off
gn_last_cable_stat=0
storage_group_access8=
ftp_share_folder_6=
wl1_antdiv=-1
tunnel_mode=0
storage_group_access9=
ftp_share_folder_7=
sb/1/boardflags=0x80001710
mfg_radio=off
ftp_share_folder_8=
traceroute_ip=
dhcp_start_conflict=0
ftp_share_folder_9=
ddns_change=
sb/1/leddc=0xFFFF
wan_ifnames=vlan2
key1_24g=
remote_management=0
sb/1/tempoffset=0
get_sern=1234567890
wl0_wme_sta_vo=3 7 2 3264 1504 off off
gn_approval_list=
block_loopback=0
wl1_ap_isolate=0
usb_mode=3
wl1_security_mode=disabled
get_pa5gla2idxval_index=0
http_method=post
ppp_mru=1500
wl1_wme_no_ack=off
wl0.1_mode=ap
clkfreq=500,200,100
os_name=linux
upnp_internet_dis=0
lan_proto=dhcp
lan_ipaddr=192.168.1.1
filter_port_grp1=
wl1_auth_type=0
wl1_radius_port=1812
dslite_cgn_addr=2001:db8:ff4e:11::8
QoS=0
usb/0xBD17/boardflags2=0x00200000
vlan1hwname=et0
filter_port_grp2=
wl0_maxassoc=128
filter_port_grp3=
filter_port_grp10=
auth_5g=0
ddns_passwd_2=
foreign_disk_info=
filter_id=1
filter_port_grp4=
wl1_plcphdr=long
dr_wan_tx=0
filter_port_grp5=
wl0_phytypes=
wl1_maxassoc=128
wl1_macmode=disabled
switch_mode=0
router_disable=0
filter_port_grp6=
wl0_wep=disabled
wl0_frag=2346
wps_sta_pin=00000000
read_disk_result=0
usb/0xBD17/ag0=0x84
filter_port_grp7=
wl1_phytype=n
wl0.1_closed=0
ddns_username=
switch_get_domain=
usb/0xBD17/ag1=0x84
filter_port_grp8=
pppoe_passwd=
wl1_phytypes=
wl1_lazywds=0
ddns_passwd=
remote_ftp=1
usb/0xBD17/mcs5glpo0=0x0000
usb/0xBD17/ag2=0x84
filter_port_grp9=
nbw_24g=20
wl0_nbw=20
auth_24g=0
lan_ipv6_addr=
gn_lan_ipv6_addr=
usb/0xBD17/regrev=0
usb/0xBD17/mcs5glpo1=0x0000
usb/0xBD17/pa5glw1a0=0x177C
sdram_config=0x0103
log_enable=0
ppp_ac=
storage_group_name10=
get_pa2ga1idxval=9 -410 7973 -1911
sys_country=US
usb/0xBD17/cddpo=0x0000
usb/0xBD17/mcs5glpo2=0x0000
usb/0xBD17/pa5glw1a1=0x16DA
filter_web_url10=
wl0_country=Q2/3
wl0_radarargs40_11n=5 4 4 100 0x6b0 0x6d9 0x2c40 0x7f07 12 195 2000 25
400000000 1000 6000000
storage_group_name11=
usb/0xBD17/mcs5glpo3=0x0000
sb/1/temps_hysteresis=5
vlan1ports=0 1 2 3 8*
dmz_ipaddr=0
storage_users_limit=20
storage_group_name12=
usb/0xBD17/pa15glidx=0
usb/0xBD17/mcs5glpo4=0x0000
usb/0xBD17/pa5gw2a0=0xfa1d
wl_txq_thresh=256
wl_wds=
storage_group_name13=
ftp_share_access=1:admin:rw
auth_exemption_list=
usb/0xBD17/mcs5glpo5=0x0000
usb/0xBD17/pa5gw2a1=0xfa11
wl1_dfs_preism=60
ddns_hostname_2=
storage_group_name14=
igmp_version=0
usb/0xBD17/mcs5glpo6=0x0000
radius_ipaddr_5g=
users_content=admin:admin:admin:adminff guest:guest:guest:guestn
dir_list=/foreign_shares
storage_group_name15=
usb/0xBD17/mcs5glpo7=0x0000
wl1_mode=ap
storage_group_name16=
boot_hw_ver=1.0
wl0_rateset=default
wl0.1_ssid=Cisco03018-guest
lan_ipv6_domain=
storage_group_name17=
usb/0xBD17/txq_len=256
wan_ipv6_gateway=
storage_group_name18=
sb/1/macaddr=00:16:B6:C4:71:B2
wl0_wme_apsd=on
wl1_wpa_psk=
storage_group_name19=
get_pa5ga1idxval=7 -374 6543 -1519
sb/1/ccode=0
qtdc1_ep=18
TMSSS_enable=0 0 65
closed_24g=0
wl0_wep_bit=64
pppoe_idletime=15
wl_wme=on
get_mac=58:6D:8F:1D:3A:97
ping_times=5
net_reauth_5g=36000
wl1_wme_apsd=on
gn_max_account=5
forward_single=
qos_enable_ever=0
get_2g_country_code_index=0
lan_ifname=br0
remote_upgrade=0
usb/0xBD17/pa25ghidx=0
wl1_ui_channels=36,40,44,48,149,153,157,161
boardflags=0x80001710
filter_services=$NAME:003NS$PROT:003:udp$PORT:005:53:53< >$NAME:004:
Ping$PROT:004:icmp$PORT:003:0:0< >$NAME:004:HTTP$PROT:003:tcp$PORT:005
:80:80<tcp$PORT:005:21:21< >$NAME:004OP3
$PROT:003:tcp$PORT:007:110:110< >$NAME:004:IMAP$PROT:003:tcp$PORT:007:
143:143< >$NAME:004MTP$PROT:003:tcp$PORT:005:25:25< >$NAME:004:
NNTP$PROT:003:tcp$PORT:007:119:119< >$NAME:006:Telnet$PROT:003:tcp$POR
T:005:23:23< >$NAME:004NMP$PROT:003:udp$PORT:007:161:161< >$NAM
E:004:TFTP$PROT:003:udp$PORT:005:69:69< >$NAME:003:IKE$PROT:003:udp$PO
RT:007:500:500< >
wandevs=vlan2
sdram_refresh=0x1a5b
gn_cur_account=0
sb/1/cck2gpo=0x0000
dhcp_domain=wan
lan_ipv6_dns_mode=1
wan_ipv6_prefixlen=0
et_txq_thresh=256
sdram_ncdl=0x5800001a
sb/1/pa2gw0a0=0xfe54
wl1_wme_ap_vi=7 15 1 6016 3008 off off
wan_gateway_buf=0.0.0.0
ftp_all=1
sb/1/pa2gw0a1=0xfe66
block_cookie=0
usb/0xBD17/maxp5ga0=0x48
sb/1/phycal_tempdelta=0
ezc_enable=1
usb/0xBD17/maxp5ga1=0x48
safe_mode_upgrade=off
wl0_nmode_protection=auto
ssid_5g=Cisco03018
ftp_share_folder_10=
wl1_ssid=Cisco03018
wl1_dtim=1
wsc_result=0
upnp_wan_proto=
is_modified=0
usb/0xBD17/stbcpo=0x0000
wan_ipaddr=0.0.0.0
filter_web_url1=
dhcp_num=50
filter_web_url2=
ppp_demand_hb=0
wl0_passphrase=
usb/0xBD17/bwduppo=0
usb/0xBD17/aa5g=7
filter_web_url3=
usb/0xBD17/elna5g=2
usb/0xBD17/txchain=3
filter_web_url4=
wl0_rts=2347
filter_web_url5=
crypto_5g=tkip
wan_ipv6_lease=0
sb/1/bw40po=0x0000
sb/1/devid=0x4347
wan_wins=
filter_web_url6=
wl_ifname=
warning_page_checked=0
qtdc0_ep=4
filter_web_url7=
http_enable=1
channel_5g=0
ntp_mode=auto
storage_group_name20=
ui_language=en
filter_web_url8=
wpa_psk_24g=
wl1_key1=
wl1_nmode_protection=auto
gn_http_port=51000
gn_bw_upstream=56
l2tp_pass=1
storage_group_name21=
media_server_name=Cisco03018
os_version=5.60.127.2901
filter_web_url9=
pppoe_username=
ppp_demand_pppoe=0
wl1_key2=
wan_speed=4
storage_group_name22=
usb/0xBD17/pa5ghw1a0=0x181f
sdram_phyctl=0x00000001
wl1_key3=
gn_wan_stat_record=0
qos_appname1=
storage_group_name23=
usb/0xBD17/pa5ghw1a1=0x17c5
wl0_wpa_gtk_rekey=3600
wl1_key4=
wl1_leddc=0x640000
qos_appname2=
storage_group_name24=
hnap_enable=1
ppp_get_srv=
radius_port_24g=1812
wl0_sta_retry_time=5
mac_clone_enable=0
qos_appname3=
storage_group_name25=
qos_appname4=
storage_group_name26=
usb/0xBD17/temps_hysteresis=5
hnap_devicename=Cisco03018
wl0_key=1
passphrase_24g=
gn_https_port=51001
wl0.1_macmode=disabled
filter_ipv6_cnt=0
wan_mtu=1500
qos_appname5=
nfs_master_enable=disabled
storage_group_name27=
wl0_active_mac=
qos_appname6=
storage_group_desc10=
device_view_type=0
wps_addER=0
wl_maclist=
emf_entry=
rate_mode=1
qos_appname7=
private_shares=
storage_group_desc11=
usb/0xBD17/ofdm5gpo=0x00000000
usb/0xBD17/boardflags=0x90000400
mfg_wait=on
wps_config_state_5g=0
wl1_infra=1
qos_appname8=
storage_group_desc12=
ip_conntrack_udp_timeout=65
mld_prefix=ff08::
et0phyaddr=30
console_loglevel=1
storage_group_desc13=
time_zone=-08 1 1
tmsss_enabled=0
wps_aplockdown_cap=1
ddns_mx=
storage_group_desc14=
charset=utf-8
switch_ipaddr=0.0.0.0
wl_wps_config_state=0
wan_auto_detect_result=UNKNOWN
wan_ipv6_dns=
storage_group_desc15=
open_disk_flag=0
wan_get_domain=
usb/0xBD17/tempoffset=0
wan_ipv6_rebind=0
storage_group_desc16=
storage_group_desc17=
wan_ifname=vlan2
net_mode_5g=mixed
storage_group_desc18=
upnp_max_age=180
adminui_warning_show=1
storage_group_desc19=
get_pa5gha2idxval=
usb/0xBD17/extpagain5g=3
sb/1/pdetrange2g=3
wep_gen_24g=
wl_radioids=
nas_login=admin:admin:adminff guest:guest:guestn
landevs=vlan1 wl0 wl1
wan_hostname=
wl0_dfs_postism=60
wl1_rate=0
gn_lan_ipv6_prefixlen=0
detect_lang=en
get_2g_country_code=
usb/0xBD17/boardtype=0xF52A
boot_hw_model=E3200
ppp_mtu=1500
wl_corerev=
wl0_radio=1
wl1_channels=36,40,44,48,149,153,157,161
log_type=ilog
wl0_nbw_cap=0
ddns_interval=60
wl0_max_channel=11
key_24g=1
wl0_bcn=100
wps_mode=enabled
manual_boot_nv=0
usb/0xBD17/triso5g=0
security_mode_0=disabled
wsc_ap_role=proxy
usb/0xBD17/phycal_tempdelta=0
filter_tod1=
ppp_static=0
wl0_hwaddr=
security_mode_1=disabled
usb/0xBD17/gpio0=pa_mask_low
filter_tod2=
wps_wer_mode=allow
wl1_net_reauth=36000
gn_lan_netmask=255.255.255.0
get_pa5gla2idxval=
filter_tod3=
ppp_demand_pptp=0
wan_ipv6_dhcp=on
sb/1/tssipos2g=1
ezc_version=2
filter_tod4=
wl0_wep_gen=
emf_enable=0
anonymous_samba=1
get_5g_country_code=
filter_tod5=
wl0_gmode_protection=auto
wk_mode=gateway
ddns_passwd_buf=
filter_tod6=
wl0_maclist=
nf_alg_sip=0
filter_tod7=
sdram_init=0x0419
filter_tod8=
filter_tod9=
wme_24g=on
sb/1/antswctl2g=1
lan_wins=
wl1_dfs_postism=60
wl_ap_isolate=0
FS_scan_folder_num=0
ftp_share_access_10=
lan_hwnames=
wps_modelnum=v1.0.03
ip_conntrack_udp_timeouts=65 180
wps_method=1
ftp_share_access_0=
usb/0xBD17/pa5glw0a0=0xFE8F
wl1_radius_ipaddr=
wl1_country=US/74
wl1_mrate=0
ftp_share_access_1=
usb/0xBD17/pa5glw0a1=0xFE6E
pppoe_demand=0
wl_wme_no_ack=off
closed_5g=0
wpa_psk_5g=
wl1_country_code=US/74
gn_bw_downstream=128
wan_ipv6_dns_secondary=
ftp_port=21
ftp_share_access_2=
ftp_share_access_3=
usb/0xBD17/pa5gw1a0=0x194e
gpio23=wombo_reset
filter_dport_grp10=
wl0_wps_config_state=0
wl0_radius_key=
wl0_radarargs_11a=5 4 4 100 0x2b0 0x2f0 0x0 0x0 8 500 4000 10 240000000
1000 3000000
wl1_gmode_protection=auto
wan_ipv6_ipaddr=
storage_group_desc20=
ftp_share_access_4=
usb/0xBD17/pa5gw1a1=0x198f
wl0_wme_ap_be=15 63 3 0 0 off off
ddns_username_buf=
storage_group_desc21=
lang_detected=0
ftp_share_access_5=
wl0_corerev=
wl0_nmcsidx=-1
gn_dhcp_start=100
storage_group_desc22=
ftp_share_access_6=
qtdc_pid=48407
wl1_rateset=default
ipv6_6to4_enable=0
storage_group_desc23=
ftp_share_access_7=
get_pa2ga0idxval=11 -428 8175 -1979
wl0_channel=0
wl1_gmode=1
nbw_cap_5g=1
wl1_ampdu=on
storage_group_desc24=
ftp_share_access_8=
usb/0xBD17/boardrev=0x1100
sb/1/ledbh0=11
wl0_wds_timeout=1
wps_device_name=Linksys E3200
wl1_unit=1
storage_group_desc25=
ftp_share_access_9=
usb/0xBD17/pa05glidx=0
sb/1/ledbh1=11
sb/1/maxp2ga0=0x64
wl1_wep_bit=64
wl0.1_bss_enabled=0
storage_group_desc26=
usb/0xBD17/venid=0x14E4
sb/1/ledbh2=11
sb/1/maxp2ga1=0x64
upnp_enable=1
wl0_wme_ap_bk=15 1023 7 0 0 off off
wl0_wps_mode=enabled
ipv6_multicast_pass=1
dr_setting=0
storage_group_desc27=
sb/1/ledbh3=11
akm_24g=
wl1_nband=1
wan_ipv6_prefix=
sb/1/cddpo=0x0000
wl1_wps_config_state=0
wl1_wme_sta_vi=7 15 2 6016 3008 off off
wl1_wps_mode=enabled
emf_uffp_entry=
wl_wsc_mode=enabled
log_show_type=ALL
filter_rule10=
wep_bit_24g=64
filter_ipv6_list=
ddns_status=
workgroup_or_domain=workgroup
dmz_src_any=1
wl1_nreqd=0
get_pa5ga0idxval=5 -381 6478 -1507
usb/0xBD17/mcs5ghpo0=0x3311
sb/1/rxchain=3
wl0_radarargs_11n=5 4 3 100 0x6b0 0x6f0 0x2c40 0x7f09 6 300 1200 25
200000000 1000 3000000
wl1_wps_crypto=aes
usb/0xBD17/mcs5ghpo1=0x8865
wl0_auth_mode=none
get_5g_country_code_index=0
boot_ver=v5.9
usb/0xBD17/mcs5ghpo2=0x3311
net_reauth_24g=36000
usb/0xBD17/mcs5ghpo3=0x8865
autofw_port0=
wps_mixedmode=0
wl1_wme_sta_vo=3 7 2 3264 1504 off off
language=EN
usb/0xBD17/pa15ghidx=1
usb/0xBD17/mcs5ghpo4=0x3311
boardnum=42
wl0_crypto=tkip
usb/0xBD17/mcs5ghpo5=0x8865
sb/1/antswitch=3
wl1_wds=
def_hwaddr=00:00:00:00:00:00
detect_charset=utf-8
usb/0xBD17/mcs5ghpo6=0x3311
auth_mode_24g=none
wl1_vlan_prio_mode=off
lan_ipv6_dhcp_renew=54000
usb/0xBD17/mcs5ghpo7=0x8865
usb/0xBD17/ofdm5glpo=0x00000000
usb/0xBD17/antswitch=3
wl1_wds_timeout=1
remote_samba=0
upnp_config=1
key1_5g=
wl_mac_filter=0
get_sn_index=1
filter_dport_grp1=
QoS_wan_ctl=1
ftp_characterset=0
startup_query_interval=31
partition_name_0=
filter_dport_grp2=
wl_radio_pwrsave_level=0 -
My iphone keeps rebooting and i can't update it and i can't use it at all
So my iPhone started doing weird things so I did a full data clear from my settings, since then it just keeps rebooting whenever I try to unlock it, I can't use it at all, I tried to update it via iTunes, it said the update to iOS 8.1 + the system restore was done but my iPhone still keeps rebooting and I don;t know how to fix it, please help, it's an iPhone 4s with iOS 7.1.2
I really need my phone back soon I can't use itHello there, ethanfromdurban.
For troubleshooting issues in regards to your iOS device unexpectedly restarting the following Knowledge Base article offers some practical steps:
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
HELP! My A1-811 keep rebooting itself
I need help! Ajter trying to update to KitKat 4.4.2 manually using this article http://acer.custhelp.com/app/answers/detail/a_id/29931#_ga=1.159508285.1207883840.1437316707 my tablet get rebooting forever. I did everything also I have downloaded the pdf file from Drivers and Manuals Section and did exactly what it says, but the update wont install, just the image with the fallen android and some information like that one from the manual. So after that I just pressed reboot system, and .... nothing. It keeps rebooting itself. Help me is there any chance to fix it? P.S: In the Drivers and Manuals section there are two files for different image files only. I get the WW_GEN, because before trying to update I have checked the last image in my settings, and it was ending with WW_GEN.
Nope the factory reset didnt help What have I done? Only get worse with deleted data!!! The tablet get stuck on the logo and continue to reboot. I have did everything - when the factory was done I have choose then to reboot the system, but that reboot continue on an on... please what to do? P.S: The factory reset was done without the sd card in tablet, if that matters.
-
I've had my 8900 for just under a year, worked well for ages but for the last month it keeps rebooting every 5 mins and is very annoying!
I ran a OS update the other day which seemed to help, but it still does it at least once a day.
Any ideas?Hi
If you updated OTA then you will have not wiped off the problem which might be caused by a reaction between the device software and an app.
This what I did to completely wipe my BB. I wrote this before starting and printed it off.
If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
Get the latest Desk Top Software (DTS)
http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
and install it on the computer.
Get the correct latest version of the OS
http://us.blackberry.com/support/downloads/download_sites.jsp
and save it to computer.
If the PC does not recognize the BB, You need to connect the via the USB cable. Then pull the battery from the BB.
With the battery pulled, connect the BlackBerry to the USB connector and as SOON as you see USB-PIN:UNKNOWN hit Next. You have to be quick. From there you can put the battery back in (make sure you install the battery or else when the OS update is completing and the device disconnects from the computer to reboot, it will lose the power provided by the USB connection and you will get an error and have to do it all over again!).
If you don't get it right the first time, try again (unplug from USB, pull battery, connect and hit Next while USB-PIN:Unknown is showing). You have to be fast and the timing is key, so it may take you three or four attempts.
To erase all the data on your BlackBerry device, complete the following steps.
1) Download JL_Cmder from http://www.4shared.com/get/oqP9V-2Q/JL_Cmder_v19.html
2) Install JL_Cmder to computer.
3) Double check you have already backed-up the BB. If you DO NOT, you will lose ALL data.
4) Make sure the DTS is closed and plug in the BB to computer via USB
5) Go to the JL_Cmder on your computer and double click it to start. Now,this may take a few tries to connect, so keep trying until it does.
6) On the first screen, Press any key to continue.
7) Now, if your device uses a password, enter it now. If not, press "N"
8) Press 4 to initiate the WIPE
9) Press "Y" to continue
10) Now type "blackberry" to continue
11) On the BB you will see a white screen with a'507' Error. Don't worry, this is what you want! You are now ready to install the OS.
Launch the new Desk Top Software on the computer
1). On the home screen of the BlackBerry® Desktop Software, click Device > Update my device.
2). Click View Other Versions. Click the version of the new OS you previously downloaded.
3). Click Install. The DTM will install the OS and then provide you with a list of applications to install. If you have had difficulties with an app, do not install it.
Do not disconnect the device until the whole process is completed and the device has rebooted.
After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
Leave it again for 10 minutes. You should now have a fully functioning BB!
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>> -
My 9630 Tour keeps rebooting, i dropped it in water a while back but it was fine for almost a year after 3 days in rice, and after the new facebook and bbm updates, ive noticed that it self reboots. I know exactly when its going to reboot, because the keyboard dims as if the battery is dying, even with full charge right off the charger, then it reboots until i plug it back in. Ive cleared out all the apps and i dont have a usb cable to try to revert back to the old os4, is there any way that i can go back to bbm 5 or earlier, assuming that is the problem?
Hi semi_n00b,
I would advise backing up your device via the BlackBerry Desktop Software and performing a clean reload of your device software. http://bbry.lv/bpv7DT
You will need a USB cable for this. If this does not resolve the rebooting issue, you may want to contact your wireless provider for any other options available to you.
Hope this helps,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
i need help my phone keeps rebooting on its own
Solved!
Go to Solution.Read this thread about JVM error
"JVM 102" error is generated on the BlackBerry smartphone
If error message persists, you may try this steps using JL_Cmder.
1) Download JL_Cmder, unzip & install to the computer.
2) Now, go ahead and sync all of your info or back it up. If you DO NOT, you will lose it ALL, obviously because we are wiping the device.
3) If you do not have the latest version of the Desktop Manager, download it from HERE
Also, make sure, that you have the OS you are wanting to install to the device, installed to your computer as well.
4) Make sure the Vendor XML file is deleted if you are going to install a OS that is not from your carrier. The vendor XML file can be located by going toC:\ProgramFiles\CommonFiles\ResearchInMotion\Apploader
5) Make sure the DM is closed and plug in BB to computer via USB
6) Go to the JL_Cmder on your computer and double click it to start. Now, this may take a few tries to connect, so keep trying until it does.
7) On the first screen, Press any key to continue.
8) Now, if your device uses a password, enter it now. If not, press "N"
9) Press 4 to initiate the WIPE
10) Press "Y" to continue
11) Now type "blackberry" to continu
12) Now you will see a white screen with a '507' Error Don't worry, this is what you want! You are now ready to install the OS.
13) Open the DM
14) Select Apploader and step your way to the finish. After the OS is installed, it will take anywhere from 15 to 30 minutes to reboot the device. DO NOT UNPLUG THE DEVICE UNTIL THE APPLOADER SCREEN SAYS "THE LOADING OPERATION WAS SUCCESSFUL!!
15) Almost done. Now, with the DM still open go to the Main page and Select "Backup & Restore" and restore from the backup that was made before wiping.
That's it! You have now wiped your device with JL_Cmder
Make sure you follow the instructions, and you shouldn't have a problem. I hope this helps.
Good luck!
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"
Maybe you are looking for
-
What program should I use to open extension torrent?
I need to open programs with extension "Torrent". I tried the free program u_torrent but I could not configure the ports for connection. Would anyone help me? Thank you.
-
Text placement problem in photoshop 4
I can't control text placement in photoshop 4. When I enter 2 letters, the line then zooms off to the right - right off the image. I tried uninstalling and reinstalling and it didn't help
-
N8 - Is Monopoly compatible with Anna?
Does anyone know if the (in my opinion) excellent version of Monopoly is compatible with Symbian Anna? History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82 Current: Nokia N8 (Anna - I have no intention of going
-
Hi, I see BW process chain showing a process node in Yellow, SM37 for the same says job is finished. I want to see corresponding job in R/3. How to find the corresponding job in tcode SM66.
-
Default value of conditon Type
Hello MM Gurus/Experts, I created a new Condition ZFR1 for Freight. Can I make a such type setting that In Purchase Order the amount of this condition type (ZFR1) Must be 1. Or If amount amount is zero than there should be an error message. Thanks in