Need to keep resetting Network - no WiFi

I have an iPhone 4 and I resisted upgrading to IOS6 for a long time. But the guy at the Verizon store insisted I would get faster speeds, so I did. Now, most of the time I can't get WiFi. Sometimes when I reset the network it works, sometimes it doesn't. I looked at some responses from a while ago and quite frankly, they were way to complicated for me to understand. I just want it to work. Now Verizon is telling me I just need a new phone, but after this experience, I am not sure I want another iPhone. The phone is over a year old, so no warranty. Any suggestions?

sorry thought you may have read some similar post to your own
download from here  http://www.metageek.net/products/inssider
when you run this assuming you use windows you will see all the networks round about you as well as your own and also the channel they are on.. change your channel in the hub to one that is free or less congested by entering  192.168.1.254 into your browser and that will take you to the hub manager.  enter your password and go to wireless and change from auto to manual then change to selected channel.  save and exit
see if that helps
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • DO I NEED TO KEEP MY IPHONE ON WIFI TO DOWNLOAD MY PICTURE ON PC BY ICLOUD? ITS LIKE BOTH DEVICE HAVE TO KEEP ON WIFI OR ONLY PC?

    just wanna know, if i wanna download all the picture from icloud , do i need to keep both device on wifi or only pc where i will download.

    just wanna know, if i wanna download all the picture from icloud , do i need to keep both device on wifi or only pc where i will download.

  • Why do I have to keep Resetting Network Settings

    Hi All,
    Hopefully someone can help. Every time I need to access emails when I'm out this iPhone fails me.  Today, I tried to access an email from a client which consisted of 2 words "That's fine".  The wheel thing spun round, and round, and round, and round....  6 minutes later it displayed "this has not been downloaded from the server".
    I tried in vain to re-load but nothing. The only thing that seems to work is to "reset network settings".
    This then means that my wifi settings at home now need re-inputting, as do the wi-fi settings  at 3 of my other workplaces.
    If I could, I would swap this for a Samsung or something.  It's a constant source of frustration and embarrassment ( when I'm with clients)
    I've had the **** thing replaced at the Apple store and I have phoned my mobile supplier t-mobile/EE ( don't get me started on them...) about 20 times and no-one can make this problem go away. I hate this iPhone.
    Can anyone here help me?
    Many thanks
    Granger

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Why do I need to keep resetting MIDI drivers in Logic 9.1.1?

    I went from Logic 9.1 to Logic 9.1.1 last week and since doing that I keep on losing my MIDI connection. This never happened to me in Logic 9.1. But now in Logic 9.1.1, in the middle of working or any time I come back to the computer after a while I will need to reset the MIDI Drivers in order to get any MIDI back for my master controller. I get no error messages. The MIDI just doesn't show up until I reset the driver. I am using the Unitor interface for MIDI and have the recent Unitor update. Any thoughts on this matter are appreciated.

    It's not a Logic problem. I don't think it's a driver problem either, I think it's an OS X problem. This happens to me with other DAWs (different MIDI interface, though). Open up the "Audio MIDI Setup.app" and see if your interface is dimmed when this happens. Clicking "rescan" should enable it again.
    I have heard of several people with this problem (not all using Logic), from RME to E-Mu to Presonus, and others. The only thing they all had in common was that they were all USB interfaces.

  • Need to keep resetting my HUB

    I was put onto infinity before Christmas and now my wireless Internet connection goes down frequently (more than once a day) I then need to reset the hub and re-enter my password, this is very frustrating. Any help appreciated .. tx Ollie

    sorry thought you may have read some similar post to your own
    download from here  http://www.metageek.net/products/inssider
    when you run this assuming you use windows you will see all the networks round about you as well as your own and also the channel they are on.. change your channel in the hub to one that is free or less congested by entering  192.168.1.254 into your browser and that will take you to the hub manager.  enter your password and go to wireless and change from auto to manual then change to selected channel.  save and exit
    see if that helps
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Help needed: blackberry keeps resetting or won't turn on after charging, especially via USB

    This is a bit of an odd one and I'd appreciate any help that others can give me.
    I've had my blackberry 8900 for about a year and a half now. 
    Whenever I charge my handset from an empty battery (e.g. this problem isn't a problem when I charge it if there's still some charge left) - either from the main power charger or via USB, I experience problems.
    Whenever it's fully charged I unplug the charger and normally at this point it cuts out completely. The screen goes black and cuts out - it doesn't even go through the normal switch-off process. From then, it won't turn on for around 3 - 4 minutes (the red light occasionally appears on the top, although it's fully charged).
    When it does turn on, it goes through a soft reset.
    This is more of a problem when I charge it via USB but equally affects charging it from the mains as well.
    Any ideas?

    It's fixable. First, charge it for several hours and then WITH the
    charger still connected, remove the battery a minute and replace, and
    reboot.
    If that does not do it, and it continues in the reboot loop
    1)
    Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2)
    On your PC, go to Start > Run and copy and paste the following line
    exactly (meaning with the quotation marks):
    "c:\program
    files\common files\research in motion\apploader\loader.exe" /nojvm
    3)
    The Application Loader Wizard will appear -- click "Next."
    4) In
    the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN".
    Click the "Next" button.
    5) You should then see a list of
    applications ready to be installed for your Blackberry. Hit Next and
    Finish and you are well on your way to getting your Blackberry back to
    life. Just don't disconnect anything and let the lengthy process finish
    completely.
    NOTE: If you do not see a list of applications
    mentioned in step 5 and instead see the message "The Blackberry Desktop
    Software does not have Blackberry Device Software for the device that
    you have connected to the computer. Contact your wireless service
    provider or system administrator," then you must download Blackberry's
    Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just
    select the appropriate carrier and network type, select your Blackberry
    model from the list and download the latest version. Install this
    download and follow the above steps again and you should be on the right
    path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

    After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

  • I can't connect to wifi network and bluetooth on iPhone 4S.  Need help.  Have already rebooted everything and reset network setting

    I can't connect to wifi network and bluetooth on iPhone 4S.  Need help.  Have already rebooted everything and reset network setting

    I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
    I think there's quite a few iphone 4s users with the same problem!
    I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
    I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
    An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
    If anyone else has any ideas these would be appreciated?

  • Tried to login to facetime for the first time since updating my iPad, and I keep getting message about it not connecting.  Wifi is working fine.  Have reset network connections.  Rebooted device.  What else can I do?

    Have been trying to login to facetime, first time since upgrading, and it keeps telling me there is a problem connecting.  Wifi is working fine.  Reset network settings and also rebooted.  What else can I try, please?

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • My wifi on my iphone 4 wont turn onand i have restarted it multipul times and even reseted network settings and nothin has worked what do i need to do?

    my wifi on my iphone 4 wont turn on at all i have tried everything restarting my phone to reseting network settings nothin has worked also my phone has been really slow and my apps will close out over and over and sometimes myphone will just lock itsself what do i need to do to fix it????? #needingsomehelp!:(

    Restore your iPhone >  iTunes: Restoring iOS software

  • Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same probl

    Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.

    Satellite L505D-S5983
    I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
    Then add things carefully, rebooting Windows and testing the USB and audio at each step.
    Please note this.
    The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
    Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
    All of the latest drivers for your model are easily found here. This one is for the sound.
       Realtek Audio Driver for Windows 7 (32/64)
    -Jerry

  • TS1398 Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working!

    Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working! Issue began whenwe upgraded the operating system.....
    Come on Apple.....get this issue sorted out!

    Just out of warranty. This is a software issue. everything was ok until the software update. Apple just need to sort it out.

  • My wifi wasn't working for more than 10 minutes at a time after updating to IOS8 and resetting network settings. I turned off google drive, turned off Bluetooth, reset network settings and rebooted my iPad4. So far so good.

    I have an ipad4.  Wifi keeps cutting out after the upgrade even after I forget the network and resign on or reset all network settings. I deleted iCloud drive from my iPad, turned off Bluetooth, reset network settings, and rebooted my iPad. Since I upgraded to IOS8 this is the longest wifi has consistently been working for me. Which is approximately an hour now. Anyone else find that this worked or have figured out if this or anything out there is a permanent fix?

    Hi CollinGCC78,
    It sounds like you have been on the right track in troubleshooting this issue. If you are still having issues, you may want to double-check the steps outlined in the following article, in order if possible (apologies for replicating any steps you have already taken):
    iOS: Troubleshooting Wi-Fi networks and connections
    Regards,
    - Brenden

  • After connecting to Bluetooth keyboard, iPad 2 will not connect to Internet (wifi) at all. Wifi is ok, have tried turning off bltooth, wifi on iPad. It sees the network but won't connect.  Help?  Have also reset network settings etc

    My iPad wifi was working great until I I connected it by Bluetooth to a keyboard (zagg).  It was the first time I'd used Bluetooth
    Immediately Internet was dropped on my ipad. My iPhone was and is still connected no prob. And I cannot get the iPad wifi to work again....at all!!!
    This is major as I am away from my desktop for three months.  Any fix cannot involve being at my desktop with iTunes which is 10,000 km away
    So far This is what I've tried based on other discussions-
    -turned Bluetooth off and unpaired to keyboard which was also turned off
    - turned iPad wifi off and on (several times)
    - forgot the network I useArrive Jul 19 depart Aug 25th. Originally it was Sept 9.
    -- reset network settings
    What happens is that the iPad sees the network and I enter my password. But, instead of getting "check mark" indicating a successful connections it keeps "circling".  Sometimes the airport bars will show, but disappear or flicker.  It never connects with a check noted in settings.   Any attempts to use internet confirm there is no connection
    My network is not a cafe or public network. It is one I regularly use here at my family's home where I am visiting
    Any ideas!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • PC to MAC switch

    Good Morning!  I recently made the switch from PC to MAC.  I had the previous version of Light Room and now that I have a new computer I can not download the older version because there is a new version.  Anyone know how I can get the previous versio

  • Send the output/response in CDATA format from OSB

    Hi, I want to send the output in CDATA format from OSB as below. <DataSet><![CDATA[<Data> <QueryRes> <tagA>anil kumar</tagA> <tagB>Telesales Lead</tagB> </QueryRes> </Data>]]></DataSet> Request your help to acieve the same.

  • Why doesn't Editor open either from organizer or on the start screen?

    In Elments 11, all worked well after install. Now, weeks later, Editor will not open. Suggestions please! Thanks much

  • Pages Not Working In Snow Leopard

    Hi I have Pages v 1.0.2 and since upgrading to Snow Leopard it won't work. I can launch the software, but it won't open any existing documents nor will it create any new ones! Please help...I am a journalist and this is my work!!!!!!

  • CS4 startup failure caused by MCmpgACodec.vca

    Premiere CS4 worked fine until a couple of months ago then it suddenly started to crash on startup. I recently found out that removing the latest MCmpgACodec.vca file in Premieres MediaIO/Codecs directory made Premiere launch again, but now it tries