Need to know how to enlarge print
need to find out how to enlarge print
Hi,
We need to know your printer because not all printers can do this.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
I need to know how to delete print jobs I don't want to
I have multiple print jobs that I no longer need to finish and I don't know how to delete them because when I cut it off it picks right back up where I left off and costing me too much paper
Hi,
I think you need to remove the queue. For Windows, please try:
hold down the Windows key and press R.
from the Run window, type services.msc and hit enter.
if the machine asks for Admin you have to accept this,
look down to the print spooler service, right click it and select properties
click on the Stop button,
browse to C:\Windows\System32\Spool\printers
delete the job inside this folder
reboot the machine
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Need to know how to save printed image settings
Photo printing setups; when printing a picture you have to make the following settings;
(1) Select printer.
(2) Printer Settings.
(3) Select paper size.
(4) Select Type of Prints.
(5) Select print size.
After doing this printing a draft copy or coming back a few day later wanting another copy printed.
You go to edit load the file for picture to print, select create and you have to redefine the print all over again, this even after printing a draft copy and its OK and want to print 10 copies, you have to go back to Create and completely reset up to duplicate the draft picture you just printed.
When save an edited and formatted picture all that is saved is the edited and format digital image file.
I may want to print the image different sizes, on different types of paper, but Photo Shop doesn’t allow save the printed image files setup perimeter’s and tying the different print image setup to image file.
So I have to maintain a file folder Excel files that list all the setup parameter’s need to print that uses this the image file as is primary image.
Have I missed a Photo Shop function, that does this?I thank everyone for the inputs, most if not all has been helpful. If for no other reason than I am not used to this type photo printing. When most printing I did over my career has been mostly l technical drawings and there most if not all, were black and white and if you got the size printed right it was fine and nobody noticed. But, now that I have retired I have more problems than before as I am now working more in not just color, but Photo graphs. Then of course there is the ten years of technology I messed. How I wish for the days when a program didn’t do what you wanted it too, you write your own code to add the function. But, now security walls and the complexity of programs today you need a team of 10 programmers’ to do that.
But, this not being able to sale the values of that print size, let alone color/shading, type paper, manufacture of paper and last but not lest printer and even its model. All of those effect color/shading of a print. Just to day I have learned that the Application Program, OS driver and the printer can have color correction processingbuilt-n. It’s no wonder what is on the screen doesn’t match what is printed. And most of these color “correction” routines can't be enabled and disabled. It is no wonder printing for one computer running the same Application and printing to two printers on that computer the prints are totally different. At least now I know about them and know that every time I print the same image file I am go to have start all over and work up all new printing parameters. Use to be editing and formatting the image was 80% of the work, now it 20% of the work and printing is 80% of the work. -
I use Mac OS X 10.6.8 and I need to know how can I print using Aficio MP C4000
I can not print after I added the printer
my laptop (MacBook Pro) using OS X 10.6.8 and my printer model is Aficio MP C4000
when I give the order print from my laptop to print the printer will print a empty paper and never stop printing
its network contact.Just to clarify, you are asking the best way to transfer a backup from a mac saved on an external HDD, to a PC that is running Windows, not another mac that is running Windows?
-
I have the f4500 all in one printer need to know how to mirror my image
i have the f4500 all in one printer need to know how to mirror the image in easy terms
Hi bbfoot,
If you are having issues setting up your HP printer on your Mavericks machine, you may find the following article helpful:
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Regards,
- Brenden -
I use Microsoft XP on my PC, where r my pictures from my iPad? I need to know how to send pictures to Walgreens, etc so I can get them printed. Help please!
I am legally blonde and not very tech savvy, so I don't really know how to do that. I know ur time is valuable, so could u possibly give me a short tutorial? I would b very grateful! I use the camera kit to get my pics from my sd card to my iPad and also from my iPhone to my iPad. Had I known I would have this problem, I would not have transferred my pics to my iPad until after I took the sd card and had my pics printed.
-
Need to know how to print in one page a big block diagram from labview
Hi!
I wanted to know how i can print a program i made on labview. The problem is that the program is quite big and i need to print it in one page. Just the block diagram.
Thanks!
MeliHello Meli,
I know, normaly your VI should not be bigger as the window screnn.
Anyway, you can use the "Print VI documentation" as explain in the following link and and choose the option "Scale block diagram to fit"
link:
Printing Documentation for VIs, Templates, and Objects
Best regards,
Nick_CH -
I some how disabled my wireless address on hp photosmart plus 209a print. I need to know how to turn it back on.
DId you just turn off the radio (does the blue light indicate that)? If so, go to Setup > Network and turn the radio back on.
Or did you reset the defaults?
Does your router have WPS? What brand/model is your router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
I need to know how to copy
pictures to a cd with the captions showing, elements 8, windows 7Here are some suggestions. Perhaps others will have even better ideas.
1 -- for viewing on a Windows computer, you can experiment with making a PSE Organizer slide show creation in which you specify to show the captions. Then save the Output of the slide show as a WMV file that the recipient could play on a computer with Windows Media Player.
If you have a DVD burner on your PC, you can also use that WMV file as input to the Windows 7 DVD Maker program for making a TV playable DVD. And if your recipient(s) who will view on a computer have DVD readers, you could make video DVDs playable on computers or TV DVD players instead of using CDs.
The limitations of this approach are that this wmv file you create is really a video file so
-- it advances photo slides at the rate specified when you create the slide show
-- the choices to save a wmv file are not very high resolution so that recipients who have high resolution monitors will not see the photo images are not getting the benefit of seeing the photos at their best
-- your recipients can't print from this video slide show
2 An entirely different approach is to
-- For each individual photo, make a copy of the photo file and depending on how high resolution your originals you might want to resize down to monitor viewing sizes.
-- Then use the PSE Editor Text Tool to place the caption on a layer above the photo. (I think that you could display the existing caption and then do a copy and paste so that you don't need to retype everything.)
-- You should save this photo copy with the text as a uniquely named JPEG file. Use the file names to control the sequence in which you want the viewer to see the photos. (Don't save as a PSD because others probably can't read the PSD format).
-- Then use your computers CD burning software to burn a folder containing all those jpeg files with the captions to CD
This approach is a bit of work for each photo and you did not say how many photo files you will be doing. However,
-- computer users should be able to display the jpegs as high resolution photos on their computer as well as optionally print from those photo files
-- many TV DVD players can play (display) jpg files from a CD disc which also gives recipients the opportunity to view the photos on their larger TV screen
Process 2 may seem complicated but once you get started I think it will be more of a production line.
ADDITION
Do you have any portrait orientation photos included with those you wish to send ? If yes, we might need to discuss some additional processing for them. -
Hi,
I need to know how can we give a value to base descriptor newly created in iProcurementWe want to add Market Price from Item Master to the base descriptor. And we want that is field show the value in the shopping catalog.
ThnaksI typically create a TEST folder on the remote site. Upload new pages and dependant files there for debugging and testing purposes. Then using a 3rd party ftp ware (filezilla, cute ftp or Ws_ftp pro), I move the new site files & folders over to the root directory. If you have used the same filenames as were on the old site, new pages will overwrite the old ones. If you used a different naming convention, you will need to delete old files from server.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
I Need to know how to do this!
I am needing to know how to do this. Is there a plugin for dreamweaver to do this, and what is this called
At the top click on "SCHEDULE A TOUR" or "REQUEST BROCHURE" The window it opens is what I am needing to know
http://www.thesolana.com/That site appears to be using Shadowbox
http://www.shadowbox-js.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/ -
Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
== This happened ==
Every time Firefox opened
== I tried to update firefox add-ons ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7Try a new profile. See [[Recovering important data from an old profile]]
-
I need to know how to delete my credit card from account because I know longer have a credit. I just want to be able to up date my Apps but I can't now because there is a credit card on my account what do I need to delete it.
I need to know how to delete my credit card from account because I know longer have a credit. I just want to be able to up date my Apps but I can't now because there is a credit card on my account what do I need to delete it. Also my credit has expired so i need to delete it.
-
I have a 3g iPhone and I need to know how to delete old photos. Need to free up space and there is no clear way to delete these photos!! Can someone please let me know how to get rid of these pictures!!!! Help!!!
There are a number of ways to delete pictures from the Camera Roll. One is to open Camera Roll in the thumbnail view, tap the arrow button (top right), tap all the pictures you want to delete, tap the Delete button ant the bottom. Photo Library pictures are deleted by unchecking Sync Photos on the Photos tab of your iTunes sync settings, followed by syncing your phone.
-
I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?
http://support.apple.com/kb/HT1449
Maybe you are looking for
-
Can't Upgrade and can't remove itunes on Windows 7 64 bit.
I transferred itunes from one windows 7 32 bit machine to a windows 7 64 bit machine. All worked fine till I tried to upgrade itunes. It will not upgrade, saying that this version of itunes is intended for a 32 bit machine. I have tried to use the 64
-
Help! I tried upgrading to bbm 6.2 using app world. However after upgrade, the phone rebooted and I cleared event log using ALT+LGLG. I could not find the bbm icon. I can see its installed via Options>Applications, but I can't find the icon. I have c
-
Black housing frame glossy finnish wears off
I think that the paint finnish comes off extremely easily. Idropped it once (on soild not even concrete) and the upper left black corner looks like it has a patch. Even before i dropped it, i noticed 2 corners of the back side had that problem too (p
-
Why isn't newly installed hard drive available for startup?
Here's what I did: 1. Backed up Macbook Pro data to external drive. 2. Installed new hard drive in Macbook Pro 3. Put old drive in hd enclosure 4. Connected old drive in enclosure to Macbook Pro via USB 4. Formatted new drive using Disk Utilities f
-
ASDoc: Top Level Package
Hi folks, after searching around quite a while without success I am wondering if you could help me with a question. We have documented our code and used the "-package" parameter with asdoc for our package description. However, how can we add the desc