NEED TO KNOW HOW TO VIEW .ASHX FILES

TO LOOK AT OLD BANK STATEMENTS, I NEED TO BE ABLE TO SEE THESE FILES. AS THE WINDOW POPS UP IN THE BROWSER, IT SHOWS NOTHING BUT BLACK. I USED TO BE ABLE TO READ THESE STATEMENTS.
DONT KNOW IF THEY CHANGED THEIR FORMAT OR I SOMEHOW CHANGE A SETTING.

Is your Caps Lock stuck, or are you yelling?... very hard to read that way.
http://discussions.apple.com/thread.jspa?messageID=6279197

Similar Messages

I need to know how to link 2 files in 1 folder

Can anyone tell me how to link 2 files in one folder? They are currently in the same folder but I need to link them.
Thank you!

Now we're getting somewhere.
Unfortunately, I don't know Word or Excel very well. It might be better to find assistance over in the Microsoft Word for Mac Forums:
http://office.microsoft.com/en-us/mac-word-help/learning-roadmap-for-word-for-ma c-2011-HA103528093.aspx
http://office.microsoft.com/en-us/mac-word-help/results.aspx?qu=Link+to+excel&ex =1&origin=HA103528093

I am replacing my Hard Drive and need to know how to xfer my files

Hi all, and thanks for taking the time to read this. I will be upgrading my HD on my Powerbook 15 AL and wanted to know what the best way of transferring, not only the files themselves, but also all the preferences (iphoto, safari etc..) bookmarks, etc.
I have a LaCie USB HD connected to my computer and wanted to know...if I just copy every folder to my external HD then copy it all back to the new HD (when I get it) will the applications still all run correctly? Is there anything else I need to do?
Thanks so much

Hey JDee - I waited a few weeks for DW 3.0.3 to be released before I was able to run it on my brand new 10.4 installation last April. What I found was astonishing 29% of my files were out of order! Some other Level 4s posted about this in The Lounge at the time, and I believe that 19% out of order was the minimum. At first I chalked it up to the amount of data I transfered from my 10.3.9 clone using Migration Assistant, but as it turned out, with every clone, I find the same thing. Same when I upgraded my HD last September (I think it was), and cloned to it from my original drive.
So, yes, I do recommend using DW before and after every clone (before on the source, and after on the target). I don't actually know if it's necessary to do regularly with incremental backups, but doing it once in a while can't hurt.
(BTW, How on earth did Richard Tuttle get famous? Yeesh.)

I need to know how to restore a file from sessionstore-backups?

I opened a link from an email and it over rided the last session I had open in FIrefox because it wasnt open when i clicked the link. I had 48 tabs open in the last session before i did this and cant seem to get them back. How do I restore a file from sessionstore-backups? The latest upgrade file based on the date probably has all of the tabs I need.

Please post this question in the database forum for an appropriate response: General Database Discussions
Regards,
OTN

I need to know how to import xml files into indesign cs6.

My client wants to send me xml text files to import into Indesign for a multi-page publication. I don't have a clue where to start. Can you point me to a tutorial that would help me figure this out?
I have a sample file that looks like this:
<?xml version="1.0"?>
<providers>
<provider>
    <name>Bow Valley College</name>
    <description>Putting the Community back in college…in the Bow Corrid
ANY TIME, ANY PLACE, ANY PATH, ANY PACE LEARNING.
Designated as the comprehensive community college for Calgary & its
surrounding region, Bow Valley College offers you learning opportunities
through flexible delivery options, including classrooms, online or self
paced modules. Whether you are taking a course for interest, to enhance
your career skills or to finish high school you have access to all of the
traditional Bow Valley College student supports.
Visit our website [2] or come see us at our Canmore campus.
BOW VALLEY LEARNING COUNCIL MEMBER.
Links:
[1] http://www.bowvalleycollege.ca/bow-corridor.html
</description>
    <contact_information>Canmore Campus
Provincial Building, 800 Railway Ave.
Canmore, AB  T1W 1P1
OFFICE HOURS: 8:30am - 4:30pm, Monday - Friday (except from 12 - 1pm)
PHONE: (403) 678-3125
FAX: (403) 678-3127
BANFF CAMPUS: Lower Level, Banff YWCA, 102 Spray Ave., Banff (ONLY OPEN
WHEN COURSES OFFERED). </contact_information>
    <email>[email protected]</email>
    <website>www.bowvalleycollege.ca/bow-corridor</website>
    <registration_information>Cancellation policy: Once your course has begun no refunds or credits will
be given. Compassionate grounds may be considered with official
documentation. There are no refunds, transfers, or credits if you cancel
within one week of the course start date.
BY PHONE: (403) 678-3125. Payment by Visa or Mastercard
IN PERSON: Canmore Campus, Provincial Building, 800 Railway Ave., Canmore.
Payment by cash, Visa or Mastercard.
 
FUNDING ASSISTANCE MAY BE AVAILABLE FOR THOSE ON A LOW INCOME ON SOME
COURSES. PLEASE ASK FOR MORE INFORMATION.</registration_information>
    <courses>
      <course>
        <title>Computer Basics/Windows 7 - Instructor led, Canmore</title>
        <description>An instructor will lead the class through the basic features of Microsoft
Windows, the Internet and Email. Find out how to start programs, create,
save and organize your files and use the online help feature. You’ll also
get an introduction to surfing the internet and setting up an email
account. This course is designed for those with little or no computer
experience – and is still our most popular course. 18 HR COURSE.</description>
        <schedule_entries>
          <entry>
            <date>Mon 6:30 - 9 pm, Oct 7 - Dec 2</date>
            <date>Thu 6:30 - 9 pm, Oct 10 - Dec 5</date>
          </entry>
        </schedule_entries>
      </course>
      <course>
        <title>Word 2010 Introduction - Self-paced</title>
        <description>Explore the basics of Microsoft Word to produce professional letters and
documents. This course guides you through the effective use of the Word
Ribbon and Quick Access Toolbar. You’ll learn how to efficiently edit,
move and copy text; manipulate fonts; apply bullets and numbering; borders
and shading; insert and re-size Clip Art; enter headers and footers; insert
page numbers; set alignment and indents; and change page settings. You’ll
learn to use the AutoCorrect feature and finish documents using the
spelling, thesaurus and grammar features.
Self-paced, 18 hr course.
Prerequisite recommended: Computer Basics or equivalent experience.</description>
        <schedule_entries>
          <entry>
            <date>Mon 7:30 - 9 pm, Oct 7</date>
            <date>Thu 7:30 - 9 pm, Dec 5</date>
          </entry>
        </schedule_entries>
      </course>
      <course>
AND SO ON...FOR 64 PAGES WORTH OF CONTENT
HELP!!!
SGAREN

Hello Sally,
First, I have only heard/read good things about the book Steve recommends. It is on my to buy list one day. Been awaiting a long deserved vaction to pick it up to read.
I approach XML files pretty much like I do any text file I am sent in that I will import or copy/paste a text file into a frame in ID and begin setting my styles. With XML, though, I first clean it up, move closing tags up to their logical close lines, remove spurious codes that mean something in HTML but don't necessarily belong in the XML file (like &#x2019 which is an apostrophe so I do a search and replace. But for   which is a non-breaking space I simply search and replace with a regular space in general), and make sure the XML validates.
Validation is much like making sure an HTML page is formed properly. I use an XML editor (XML BluePrint) and a text editor (UltraEdit) for these tasks. If I had to only have one or the other, I suppose the XML editor is what I would use.
I always show the import options when I import the XML and make sure that I link to the file.
So once a sample of the XML is on a page in ID (via File | Import XML), I highlight text within a tag, say like in your example above, the Providor name, and make it like I want and then create a new style. I generally name the styles as per the XML tag. Later on, that makes mapping tags to styles a little easier.
Once I set up all the styles preliminarily, I map the tags to styles. You can do that either via the Tags palette or via the Structure Pane that will appear once the XML is imported. In both cases, it is found via the flyout menu at the top right of their respective windows.
After mapping my styles to the tags, I select the root element in the Structure Pane (the topmost element. In your sample above it is "providors" and delete it. This removes the XML in your ID file. But the styles and tags are still present.
Then I import the XML again and look to makes sure all the tags/elements are styled as intended. I then correct any errors/ommissions. Then...I'll delete the XML again and import the full XML file.
I can upload what I did with your XML sample above so you can compare it to your source file if you would like. You would then see how/where I moved tags. Now, moving the tags is only "necessary" to avoid all the extra blank paragraphs. That can be accomplished by ID's search/replace, too. But I like to start out with the XML cleaned up, so I take the few minutes to do it.
Take care, Mike

How to View/manage Files on Internal Storage?

Does anyone know how to view/manage files on the Droid Mini? I did find a list of 'Misc. Files' in 'Settings' under 'Storage'. But it only gives the option to delete. My old phone had a 'Files' app (that came on the phone) where I could view/manage all files. I'm sure I could just plug into my laptop, but I would like to have file access on my phone. Is that even possible? Is there a *good* App I could upload perhaps? Any suggestions?
Thanks =)

The Play Store. Search for "File Explorer". Select one from the several found.

Okay, I confirmed my email address. That took me back to the original page. I was told to edit my profile and I will see my question. There is no place to edit. Please help. I need to know how to uninstall an APP that I installed on my PC using firefox.

I need to know how to view a question I asked earlier. How do I uninstall an APP from my PC.

Your system is not working. No one has replied, yet you are asking me to reply.

I need to know how to "compress" the Folder Tree. The File folders are moving to the right and out of sight in Lightroom 5.

I need to know how to "compress" the Folder Tree. The File folders are moving to the right and out of sight in Lightroom 5.

A couple of suggestions that may help:
- Make sure you've made the left-hand column as wide as possible by grabbing the divider between the column and the Library grid view.
- You can hide a parent folder from the display by right-clicking it and selecting Hide This Parent. This will shift all the child folders to the left.

I need to know how best to import .mod files into elements 7

I need to know how best to import .mod files into elements 7

lornamarieslade
Are you working with .mod standard or widescreen?
If .mod standard, less problematic. The file just might import without issue. Worst case would probably be changing the file extension from .mod to .mpg just prior to import.
Now .mod widescreen is another story that revolves around maintaining the 16:9 flag that scretches the video for display after encoding. Some have said that the 16:9 flag is lost in the transfer to computer; some say certain editors such as Premiere Elements just cannot read/recognize the flag. Whatever the case this is what you should consider in your Premiere Elements 7 Windows.
a. If you need to rename the file extension from .mod to .mpg, do so prior to import.
b. Import the .mod or .mpg counterpart into your Premiere Elements 7 project using the project preset NTSC or PAL DV Widescreen (NTSC or PAL depends on your location of interest). You will probably see that the video does not fill the space in the Edit Mode Monitor (you will probably see standard 4:3 looking image rather than widescreen 16:9 looking image).
c. Right click the file in the Project media area, select Interpret Footage, and, in the Interpret Footage Dialog/Pixel Aspect Ratio section, dot the Conform To: and change the setting to
D1/DV NTSC Widescreen 16:9 (1.2)
or
D1/DV PAL Widescreen 16:9 (1.422)
depending on your location of interest.
A while back there used to be a program called SD Copy that did the job of file name change and adding the 16:9 flag prior to import of the .mod widescreen into Premiere Elements. But, I have lost track of the SD Copy and suspect that is it no longer available. I have dealt with this issue many times at a forum that I formerly frequent. Most have reported back that this workaround worked for them. It is worth a try. I am looking forward to your results.
If you do opt to upgrade to Premiere Elements 11 Windows (please go tryout before purchase), I am eager to learn how your .mod widescreen is handled by version 11 in your computer environment.
Thanks.
ATR
Add On...I just came across this download for SDCopy. It does not give the appearance of the original the link to which is broken. I have not downloaded and used the following since I do not have any .mod widescreen. So, no guarantees. Please let us know the outcome if you try it if Interpret Footage does not work for you.
http://paulmcgrath.net/download.php?view.8

Hello I need to know how to export a frame as TIF file

Hello I need to know how to export TIF or JPEG Files from the Timeline. Thanks for your assistance.

Place the playhead on the frame you wish to export.
Go to the menu File > Export > Using Quicktime Conversion . . .
At the bottom of the pane that open, choose Format: Still Image and click the Options Button
In the pane that opens, choose either Tif of Jpeg and click OK
Navigate to where you want the image stored, change the name if you want, and click Save.
MtD

Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

See your other thread.

Ust purchase an iphone 4s and need to know how could i transfer all files including (contacts, pictures, music, notes and ect.... from sd card or any external card to iphone 4s, please advise thx

ust purchase an iphone 4s and need to know how could i transfer all files including (contacts, pictures, music, notes and ect.... from sd card or any external card to iphone 4s, please advise thx.

You need to put all of your info on your computer and then sync it to iphone.

HT1338 I made a movie in iMovie and want to make copies. I lost the iMovie file, I just need to know how to copy a disk. HELP!

I made a movie in iMovie and want to make copies. I lost the iMovie file, I just need to know how to copy a disk. HELP!

Not sure if you really mean disk (HD) or disc (CD/DVD). Check out this YouTube video

I need to know how to copy pictures to a cd with the captions showing, elements 8 and windows 7

I need to know how to copy
pictures to a cd with the captions showing, elements 8, windows 7

Here are some suggestions. Perhaps others will have even better ideas.
1 -- for viewing on a Windows computer, you can experiment with making a PSE Organizer slide show creation in which you specify to show the captions. Then save the Output of the slide show as a WMV file that the recipient could play on a computer with Windows Media Player.
If you have a DVD burner on your PC, you can also use that WMV file as input to the Windows 7 DVD Maker program for making a TV playable DVD. And if your recipient(s) who will view on a computer have DVD readers, you could make video DVDs playable on computers or TV DVD players instead of using CDs.
The limitations of this approach are that this wmv file you create is really a video file so
-- it advances photo slides at the rate specified when you create the slide show
-- the choices to save a wmv file are not very high resolution so that recipients who have high resolution monitors will not see the photo images are not getting the benefit of seeing the photos at their best
-- your recipients can't print from this video slide show
2 An entirely different approach is to
-- For each individual photo, make a copy of the photo file and depending on how high resolution your originals you might want to resize down to monitor viewing sizes.
-- Then use the PSE Editor Text Tool to place the caption on a layer above the photo. (I think that you could display the existing caption and then do a copy and paste so that you don't need to retype everything.)
-- You should save this photo copy with the text as a uniquely named JPEG file. Use the file names to control the sequence in which you want the viewer to see the photos. (Don't save as a PSD because others probably can't read the PSD format).
-- Then use your computers CD burning software to burn a folder containing all those jpeg files with the captions to CD
This approach is a bit of work for each photo and you did not say how many photo files you will be doing. However,
-- computer users should be able to display the jpegs as high resolution photos on their computer as well as optionally print from those photo files
-- many TV DVD players can play (display) jpg files from a CD disc which also gives recipients the opportunity to view the photos on their larger TV screen
Process 2 may seem complicated but once you get started I think it will be more of a production line.
ADDITION
Do you have any portrait orientation photos included with those you wish to send ? If yes, we might need to discuss some additional processing for them.

I have a 3g iphone and I need to know how to delete old photos from my phone!! I need the space but there is no way to delete the pictures!! Help!!!

I have a 3g iPhone and I need to know how to delete old photos. Need to free up space and there is no clear way to delete these photos!! Can someone please let me know how to get rid of these pictures!!!! Help!!!

There are a number of ways to delete pictures from the Camera Roll. One is to open Camera Roll in the thumbnail view, tap the arrow button (top right), tap all the pictures you want to delete, tap the Delete button ant the bottom. Photo Library pictures are deleted by unchecking Sync Photos on the Photos tab of your iTunes sync settings, followed by syncing your phone.

NEED TO KNOW HOW TO VIEW .ASHX FILES

Similar Messages

Maybe you are looking for