Need to know If I can Replace this

http://coolcrossovers.com/car/47252141-7.html
Ignore the car just look at the radio and all that, I need to know if this can be replaced without making my car look trashy, for example if it is replaced will it leave a gaping hole in my dash because of its irregular size?

That can definitely be replaced.  Whether it looks trashy or not is pretty much in he eye of the beholder.  Replacing it would require this dash kit and it can be either a double din or a single din unit.  I have had clients that have gone with a double din unit before just because it fills more of the space and "looks better" in the dash.  Either way you go, there won't be any gaps when using the dash kit because it fills the exact space that the factory radio occupied.  That kit is typically not stocked in store at all so you would want to order it ahead of time.  You would also require a wire harness to replace the stereo and there are two possibilities: NON JBL and JBL.  Both of those parts are typically stocked in store and which one you need is determined by the vehicle itself.  Usually if the JBL system is present it will say JBL right on the face of your factory radio.  A good idea would be to call your local store to determine if they have those harnesses or if you would need to order them as well.
While I am employed by Best Buy, all of my posts here are in a non-official capacity. Any information or recommendations that are given are done so in an attempt to help in any way that I can and are not an official part of my job. If you feel that I have helped, feel free to give me Kudos or mark my post as a solution...I like to know how well I am doing.

Similar Messages

  • Hello. I need to replace my macbook A1278 Screen. I need to know if I can get this online. thanks,  Claudia

    Hello. I need to replace my macbook A1278 Screen. I need to know if I can get this online. Thanks,  Claudia

    MBrache wrote:
    I need to know if I can get this online.
    yes.  here are some results

  • Can I move all my photo that I can see on iPhoto from my Mac hardrive and put them on an external hard drive and still be able to see them as thumbnails in iPhoto? Thanks! The reason, I need to know if I can do this is b/c I am running out of HD space!sp

    can I move all my photo that I can see on iPhoto from my Mac hardrive and put them on an external hard drive and still be able to see them as thumbnails in iPhoto? Thanks! The reason, I need to know if I can do this is b/c I am running out of HD space!sp

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Need to know if FCE can do this...

    Much like the Gatorade commercials that are in black and white but the sweat is in some color running down their face. Is it possible to do this in FCE?

    It's tricky, but it can be done if you use orange sweat.

  • TS1702 I need to know how i can fix this I bought $20 itunes card after putting my password in and said your purchase could not be completed and gave this link

    I just bought $20 iTunes card and went to buy gems on clash if clans. I got all the way up to putting in my apple ID password after putting it in it said your purchase could not be completed and gave me this link

    Contact iTunes by
    Apple - Support - iTunes - Contact Us

  • I got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this?

    i got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this and get my information back?

    Every backup replaces the old one, so, unless you included the backup folder in your computer backup routine, you can't get back your calendar info.
    The only time iTunes will not replace a backup is, when you use it to restore from, this one will stay in the backup list in iTunes.
    More info on backups here: http://support.apple.com/kb/HT1766

  • I'm trying to find instructions on replacing the memory module in an older MacBook (1,1). This is the model that has the battery on the back. Anybody know where I can get this info? (It's not listed in the Apple Support info)

    I'm trying to find instructions on replacing the memory module in an older MacBook (1,1). This is the model that has the removeable battery on the back. Anybody know where I can get this info? (It's not listed in the Apple Support info)

    Video of the installation here:
    http://eshop.macsales.com/installvideos/macbook_13_mem_hd/
    MtD

  • I am trying to update my ibook 10.4.11so i tryed leopard but it said i needed  10.5 anyone know where i can get this from or anyother ideas

    i am trying to update my ibook 10.4.11so i tryed leopard but it said i needed  10.5 anyone know where i can get this from or anyother ideas please help

    What is your need to upgrade to Leopard? So you can sync to iPhone, iPad, etc?
    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    The DVD should look like this
    Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
     Cheers, Tom

  • I need to reinstall my Final Cut Express.  I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install.  Does anyone know how I can resolve this.

    I need to reinstall my Final Cut Express.  I have a version of 3.5 and then an upgrade to 4. Somehow I have managed to mislay the serial No for 3.5 so cannot install.  Does anyone know how I can resolve this.

    If version 4 is an upgrade only, you will have to have the serial number of the 3.5 full version.
    If you can't find it try contacting Apple with your proff of purchase, they may be able to help.
    Al

  • HT5367 Does anyone know if I can download this version of Java - for OS X 2012-005 - the new Java update is a total mess and it is preventing me from working... need to go back :-(

    Does anyone know if I can download this version of Java - for OS X 2012-005 - the new Java update is a total mess for me and is preventing me from working remotely...  :-( really need to go back to older Java, don't have the Time Machine set up ...  Thx

    I wonder if it's a variation of this, of which I've seen many different symptoms...
    http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/TS4135/TS4135_01-osx _1072-login_window-001-en.png
    Resolution
    Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
    If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
    Additional Information
    This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
    Open System Preferences > Security & Privacy > General.  Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
    Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
    Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
    http://support.apple.com/kb/TS4135?viewlocale=en_US

  • I need to know how I can disable the automatic updates of Firefox, since I work in a company that is requiring this. Ideally, by group policy or some means to disable all network computers

    I need to know how I can disable the automatic updates of Firefox, since I work in a company that is requiring this.
    Ideally, by group policy or some means to disable all network computers

    Some info here (group policy) --> http://www.unidesk.com/blog/how-disable-firefox-auto-updates<br />
    Above article refers to --> http://sourceforge.net/projects/firefoxadm/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Keep getting a mail pop up "enter password for account "SBC." ATT says I need to update my Mac mail server program. Anyone know how I can do this?

    I keep getting an annoying pop up for mail "Enter password for account "SBC."  I enter my password but it still pops up. But I can still get my mail when I click on "Get mail."  I called ATT and they said they are aware of the problem with Mac users and that I have to update my Mac Mail server program. Anyone know how I can do this? They want to charge me.

    RE: "Mail, Contacts and Calendars preferences can't connect to the Yahoo account "bellsouth.net".
    I recently changed my ATT U-Verse password…and Mail quit working… it wouldn't send or receive, Safari worked fine.  I tried to send an email and a warning message popped up, "Mail, Contacts and Calendars preferences can't connect to the Yahoo account "bellsouth.net". In smaller type the next sentence read, "Enter the password for user [email protected]". The Password box was highlighted in blue so I just typed in my new password and my email message was immediately sent…but… I still couldn't receive messages AND the above "can't connect" warning message kept popping up on the screen at random.
    Here's the Fix that worked for me. (The problem is that the new password was changed/updated on the keychains "smpt.att.yahoo.com" name-but- the name "pop.att.yahoo.com" didn't update to my new password).
    Go to your Utility windows and select Keychain Access. Under Category select Passwords. Now check your password for your current (newest dated) name, "smpt.att.yahoo.com". Now check the password under, "pop.att.yahoo.com". Mine wasn't the same as my newest password found in my
    "smpt.att.yahoo.com" window so I deleted my old password in the "pop.att.yahoo.com" window and typed in my new password, then selected "Save Changes". MY MAIL NOW WORKED…and no more warning messages cropped up. Problem was fixed.

  • I have 3 apple devices and I use the same apple ID for all 3.  I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device.  Anyone know how I can do this?

    I have 3 apple devices and I use the same apple ID for all 3.  I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device.  Anyone know how I can do this?

    Create a new ID:
    On the iPod go to
    - Settings>Messages>Send and receive and sign out your ID and sign into the other one. Make sure that only her ID email address is listed.
    - Settings>FaceTime sign out of your ID and sign into the other one. Make sure that under You can be reached at only the newID email address is listed
    - Settings>iCloud and sign out and sign in with the new one
    - Settings>iTunes and App Store and sign out your ID and sign in with the new one.
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

  • Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how  indesign can do this action.

    Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how  indesign can do this action.

    set the wake-on lan on the main computer
    The laptop's too far away from the router to be connected by ethernet. It's all wifi.
    No separate server app on the laptop, it's all samba
    The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
    I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
    Last edited by saft (2010-03-18 20:38:08)

  • I'm having problems upgrading from 10.6.8 to Yosemite.  My computer locks up after the download and installation process.  Does anyone know how I can overcome this problem?

    I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Maybe you are looking for