Need to know the simplest workflow for Flash CS5 to iPad

Hi There,
Can you please tell me the simplest workflow for Flash CS5 to iPad.
I want to put my company's flashCS5 made interactive portfolio(with FLV video showreel) into ipad to show my clients.
What is the simplest way?? I am not familier with codes or programming.
Can you help me guys??
-Sahid
I am using PC.

It doesn't matter whether you use a MAC or a PC to create the content - the iPad simply will not accept it. It was designed with exactly that purpose in mind. That's why I advised you to get rid of it. Stick to PC and you'll have zero problems.
Just a hint - a Sony Vaio (the 11 " models with carbon fiber casing) look even more prosperous, are the same weight, and since they run Windows OS will not have the typical Apple limitatations
Emil Georgiev - Flash & Web Design

Similar Messages

Need to know the base tables for the QM datasources

Hello SAP Experts,
I want to know the base tables for the below mentioned datasources which stores the transaction data.
1. 2LIS_05_QE1: Inspection Characterstics Results
2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
3. 2LIS_05_QVUDN: Usage decision for Inspection
Need your inputs.
Thanks,
Lasya.
Edited by: lasya john on Dec 10, 2008 8:28 PM

Hi Lasya,
You can use help.sap.com for this.
If you do not find this data source there...then
You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
Click on that ...and go inside it in the display mode.
Here you can see a generic pool of fields on the left side which can be included in the data source........ field present in the data sources in the right side of the pool.
For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
So the field is being from that particular table.
Even I would the same thing to reply to your thread.
You can follow the same procedure to find the table for any LO data source.
This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
Hope it helps.
Thanks
Ajeet

I am a student working on a project for school and I need to know the bandwidth options for the iPad mini with retina display

I am working on a project where I am required to introduce a new product for consideration in the hospital setting. I have chosen the iPad mini, and have been able to locate the information that I need except for the bandwidth options. Any help would be appreciated.

I don't know what you mean by "bandwidth options". If you mean the frequencies and bands the iPad can use with cell carriers, those are listed in the Wireless and Cellular area of the tech specs. For iPads sold in the US, see:
http://www.apple.com/ipad-mini/specs/
If that's not what you meant, please post back and clarify what you mean by "bandwidth options".
Regards.

I need to know the proper syntax for my SELECT query, please.

Hello All,
Quick one for you:
Let's say that I have several columns in a table with names such as subject_1, subject_2, subject_3, etc. The table's name is subject_names.
The number in each of the three column name examples is also a value passed along a query string, the user can select choices, 1, 2 or 3. That query string's variable is $qs.
So, what I want is a SELECT query that uses the query string value as follows (KEEP IN MIND, I know this is not the proper syntax):
"SELECT subject_[$qs]
FROM subject_names";
I have tried all sorts of cominations of quotes (single and double), dots, brackets, braces and parenthesis. I just want to know how to include such a variable within this code.
Any and all help is sincerely appreciated!
Cheers,
wordman

Well, I did give you the syntax though.
$query = 'SELECT ' . $qs . ' FROM tbl_name';
I put spaces between the periods this time to make it more clear.
If you put the actual word 'subject' in there and just want your form to name it's options as the numbers available you could do this:
$query = 'SELECT subject_' . $qs . ' FROM tbl_name';
In PHP you can use either single or double quotes around your query string, I always just use single quotes. I see a lot of other use double quotes.
Double quotes would look like:
$query = "SELECT subject_' . $qs . ' FROM tbl_name";
Or when using double quotes you can actually just place the variable right in the string without having to concatenate multiple strings like above.
Since you mentioned that you are good with passing variables I probably don't have to mention that you need to set the value attribute of your option tags (if you are using a select) to the value you want them to pass.
Ex:
<select name="choices">
     <option value="1">1</option>
     <option value="2">2</option>
     <option value="3">3</option>
</select>
If you have that part all figured out then you can use the syntax above for your query string.
Good luck.

I need to know the application ID for Speech Feedback.

I have a problem, the speech feedback icon is in my window after I used it for a while. I went to system preferances and turned speech feedback off. The icon did not disappear. I have tried right clicking for options but nothing happened. I also looked up a converstion in which the questioner was using later software than mine. He had updated his software and the icon was deleted on his desktop. At the end of the conversation between the apple user and the apple attendant the attendant said alternately he could go to the terminal application and type "kill #" the hashtag stands for the item ID. He reffered to an application which I have never seen nore heard of called Process ID. Of course, the user had been using older software than I at the time. I would like to know what the ID for Speech Feedback is so I can delete the icon using terminal. The other recomendations the attendant reffered to did not work, so again, what is the system ID for the Speech Feedback icon/application?

Hi, it'll have a different number depending on when it starts, one way to see the PID is to...
Open Activity Monitor in Applications>Utilities, select All Processes & sort on, sort on Nasame for instance.
Another to just type top into Terminal...
QS2002-G5:~ bdaqua$ top
Processes: 94 total, 4 running, 90 sleeping... 307 threads            17:20:27
Load Avg: 2.36, 2.27, 2.25     CPU usage: 51.2% user, 9.4% sys, 39.4% idle
SharedLibs: num = 190, resident = 73.9M code, 5.50M data, 22.9M LinkEdit
MemRegions: num = 29182, resident = 1.49G + 22.6M private, 459M shared
PhysMem:   560M wired, 437M active, 1.85G inactive, 2.82G used, 7.18G free
VM: 18.4G + 114M   108548(0) pageins, 0(0) pageouts
PID COMMAND      %CPU   TIME   #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
1815 top         29.0% 0:05.32   1    18    22   680K   520K 1.09M 27.0M
1813 Tri-Backup   0.6% 0:31.47   3   256   309 90.4M+ 40.9M 51.7M+ 491M
1795 Mail         0.0% 1:40.68   6   137   511 83.7M 59.4M   101M   542M
1794 lookupd      0.0% 0:07.23   2    34    35 1.36M   712K 1.91M 28.1M
1678 seamonkey- 99.8% 8:08:36 15   196 2049   243M- 79.3M   276M- 668M-
1673 firefox-bi 100.7% 9:20:19 16   208 3701   561M+ 104M   601M+ 1007M+
1597 writeconfi   0.0% 0:00.09   1    22    27   368K   932K 1.79M 27.3M
1590 NetCfgTool   0.0% 0:00.02   1    22    24   248K   900K 1.01M 27.2M
1587 System Pre   0.0% 0:05.96   3   147   391 17.8M 35.4M 26.2M   384M
1566 Preview      0.0% 0:05.11   4    87   304 6.01M 37.1M 16.1M   371M
1432 httpd        0.0% 0:00.17   1    12    81   260K 1.81M   876K 28.2M
1430 Grab         0.0% 0:01.62   3   160   300 4.61M 32.6M 19.4M   369M
1392 SMART Util   0.0% 0:02.60   3   101   291 6.95M 45.0M 28.1M   403M
1388 bash         0.0% 0:00.02   1    14    17   204K   968K 1.33M 27.2M
1387 login        0.0% 0:00.02   1    16    37   124K   560K 1.68M 26.9M
1385 Terminal     0.5% 0:55.87   3    70   251 2.71M 31.3M 17.3M   363M
1379 httpd        0.0% 0:00.28   1    12    81   260K 1.81M   876K 28.2M
1376 Network Ut   0.0% 8:46.44   2    89   265 3.37M 31.6M 5.77M   363M
1374 httpd        0.0% 0:00.32   1    12    81   280K 1.80M   884K 28.2M
958 Canvas 9?~D   1.1% 25:47.61   8   107 2184   115M 94.1M   150M   577M
[1]+ Stopped                 top
Type control+z to get the prompt back.

Need to know the best practice for converting string to double

I have a string and want to convert to double if it is a valid number, else want to keep as it is. There can be couple of ways doing it and I want to know which one is best if I have lots of strings, specially from performance point of view.
1) Use Double.parseDouble(myString) and catching Number format exception to detect it is not a number. One of my colleague said it does not give good performance because of exception catching,
2) Use of org.apache.commons.lang.math.NumberUtils.isNumber() and if it is true then only parse it - so don't rely on exception.
I did some performance testing - putting it in a loop and trying out for 2 scenarios - one loop for proper numeric value string and another for non-numeric. What I found out was if strings are not proper then parseDouble() is taking long time (because of exception catching) and in that case using NumberUtils.isNumber() makes sense.
Would like to hear expert views on this.
Thanks
Manisha

If you need it as a double you must convert it to a double and catch the exception. This means that testing it first is a waste of time in the case when the test succeeds - did your colleague think of that?
Catching the exception is possibly slower than the test. Whether this is significant depends on the relative timings of the test and catching the exception, and also on the expected error rate. If this is below about 40% I suggest your colleague is talking through his esteemed hat.
And of course the best test by far is the conversion itself. Using any other test runs the risk of its rules being different from those applied by the conversion.
In any case you are obliged to write the code that catches the exception. You're not obliged to write the pre-test code.
My personal rule for efficiency is to minimize lines of code until hard evidence to the contrary proves that further improvement is required.

Need to know the fax number for bt customer servic...

Ive been trying to apply for a phone & broadband package for over a week now and been called twice from bt asking me to send them some proof of ID and proof of tenancy for my current address so they can go ahead with my order.. The first person who called me gave me this email address to send my scanned documents to "[email protected]" ... i sent a email with 3 scanned documents and had no reply for 3 days and my order status was still in pending status... i then used the online chat and asked them to book me a callback so i can get some kind of update on whats happening etc ... then today i get a call and again was asked to send my ID and proof of tenancy to a fax number that would be texted to my phone after i put the phone down ... ive now been waiting since monday 4pm and still no fax number sent to me..
Can somebody please tell me what the fax number is that i need to use for sending my ID and proof of tenancy to.
thanks
tony
Solved!
Go to Solution.

Hi Welcome to the Forum
Once the Forum Mods have read your post they will post an invite here once you reply to them they will take personal ownership of the problem until resolved.
Do not send them a Personal Message as this is the incorrect contact method and cannot be properly tracked also the mod contacted may not be on shift for sometime and this will delay your help
The forum mods normally reply within3/5 working days after you have contacted them
They will contact you personally by email or phone
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Need to know the Business Package for CRM4.0 Sales in EP6.0

Hi experts,
We are trying to implement the CRM4.0 Sales business package in our EP6.0 environment( Our Backend R/3 is in 4.6B) . We would like to install complete package for the Sales module (The main (Top level) menus in the portal look like the following ==>
Activities.. Account Management ... Acquisition.. Sales .. Products.. Analysis..   Home.. R/3 Integration .. CRM integration .. APO integration..
Below every top level menus there are sub menus.. For example under Sales we would have the folliwng ( Overview.. Quotation.. Orders .. Contracts.. Billing Documents )
In the list of package from CRM (available in the SDN) the following looks like the currect one, can anybody advice please.
Business Package for SAP CRM 4.0     60.2.3   SAP AG   Unrestricted Shipment.
However, since we are only interested about the Sales Portion only can we choose to import content that is relevant only to the CRM SALES as well as CRM SALES analytics and not anything else? If it's possible the what is the procedure? If not then I assume that we will have to import the entire content and activate only the portion that we need. Please advice.
Appreciate a detail reply.
   Thanks
Arun

Hi Arun,
When u download and apply a busiiness pacakge u will get the complete package.
After appling the bussiness package u will get a report showing whcih all roles worksets etc are added to the portal. And also In portal contants there will be a folder created. There u can see the roles , worksets pages iviews etc.
You can edit the role and put the desired iviews or pages according to u r demand.
Hope this Helps
gEorgE
Read the log file(generated after importing the BP) it will give u all the information abt the contents that are uploaded to the portal server.

Need to know the best method for pattern matching

Hi,
I need a best a way to do the pattern matching with better performance
for the following requirement.
i need to search for a set of records as per the following requirements.
1. The input string will be split into tokens with space as delimiter
so if the user enters the text 'severe head ache',the tokens formed will be
severe
head
ache
2. The terms which contain exact match of the tokens formed should be fetched from the database
(i.e)
i. the token should appear in the term as such and no alpha-numeric character should be appended to it but a single space or any single non alpha-numeric characer is allowed
ii. the token may occur anywhere in the string.(like start, end, middle etc.)
iii. the term should contain all the tokens
For ex. the following terms will be fetched for the above input
1. patient has severe head ache
2. severe, head ache are present
3. leg pain "severe" #head pain
4. pain, severe in head, leg
But following terms should not be fetched
1. severe leg pain - (it does not have the token 'head')
2. headache severe and leg pain - (head is a part of the word headache)
3. head67 severe pain - (head is a part of the word head67)
Thanks

How about Oracle Text? There's even a Text dedicated on this topic here.
C.

I would like to fix a bug, but I need to know the leading developer for Firefox sync. I need verification of a Mozilla dev for a class project prerequisite.

I found bug 859889 on Bugzilla, I would like to develop a patch for it. In my software development class, my professor asked us to get the permission of a leading developer for our project proposal. If you can direct me to such a developer, that would be great. The dev in question should also have access to Firefox Android's code base, as to apply the patch if completed and accepted.
The url to the bugzilla page is "https://bugzilla.mozilla.org/show_bug.cgi?id=859889".

I guess that is you that has already posted [https://bugzilla.mozilla.org/show_bug.cgi?id=859889#c1 Bug 859889#c1]
Presumably you already have the C++ and other skills to tackle this. I suggest you look at and follow links from
* https://developer.mozilla.org/en-US/docs/Introduction
Does that help ?

Need to know the sessions configurations for Conferencing and Transocoder on Voice Gatway

Hi All
Please help me to understand the concept of how we can calculate the session while we are configurating the conferencing ang transcoder on Voice gateway.
Regardss
Chaman

The calculations can get quite complex with DSP sharing, codec complexities, etc. Start of with the DSP calculator tool (
http://www.cisco.com/web/applicat/dsprecal/dsp_calc.html?utm_source=twitterfeed&utm_medium=twitter) and see if it helps you find what you are looking for which I think is how many conferencing and transcoding sessions you can have based on your router configuration.

Enable the approval workflow for the Sales Orders (Standard)

Dear All,
I need to enable the approval workflow for the Sales Orders (Standard). How can I do this? Please update
The version of apps is 11i
many thanks in advance...
Edited by: santark on Oct 27, 2010 3:47 PM

Dear All,
I need to enable the approval workflow for the Sales Orders (Standard). How can I do this? Please update
The version of apps is 11i
many thanks in advance...
Edited by: santark on Oct 27, 2010 3:47 PM

I need to know the multitude of reason why my iPhone 5s would prompt me for my Apple ID password. Please help.

I need to know the multitude of reason why my iPhone 5s would prompt me for my Apple ID password.
All I did was place my phone on the charger, I then walked away for 10-15mins and when I came back it was asking me to enter my Apple ID password.
I never gave my password out to anyone ever and hardly anyone knows my email address.
I haven't recently downloaded anything either and I only have one apple device which is my iPhone 5s.
I just want to know really if it could have been because someone was trying to log into my Apple ID?
Please help with multiple reasons why this could have happened. I just want to know the options. Thank you

My iPhone 5s did the same thing yesterday. I have iCloud backup turned on in Settings > iCloud > Storage & Backup and that means it will automatically do a backup when the phone is plugged in, locked and connected to wi-fi. I had it charging and when I returned it was asking for the password and the prompt did identify that it was requesting it for the iCloud backup (something you may not have noticed if you didn't look closely).
It has never done that before and 2 iPads in my household have not yet done it. All are on iOS 7.1
I have found a report of the same issue by a user of the 7.1 beta and in that case it was happening every day. In my case I entered the password then went to the same area in Settings as above and used the "Backup Now" button to do a backup. I will see tonight when I charge again whether this is going to be an every day problem.

Need to know the roll and responsibilty for AP,PO etc module for users

Hi All,
I need to know the roll and responsibilty for AP & purchase module etc for all the users, I have to give all the details for auditing.
Thanks,
Edited by: Quadri on Mar 9, 2010 11:39 PM
Edited by: Quadri on Mar 9, 2010 11:41 PM

Hi,
execute the below query to find the details with application name
SELECT distinct
B.RESPONSIBILITY_ID,
A.RESPONSIBILITY_NAME,
A.LANGUAGE,
B.RESPONSIBILITY_KEY ,
B.APPLICATION_ID,
C.USER_MENU_NAME,
E.APPLICATION_NAME
FROM APPS.FND_RESPONSIBILITY_TL A,
APPS.FND_RESPONSIBILITY B,
APPS.FND_MENUS_TL C,
APPS.FND_MENUS D,
apps.FND_APPLICATION_TL E,
apps.FND_APPLICATION F
WHERE A.RESPONSIBILITY_ID(+)=B.RESPONSIBILITY_ID
AND B.MENU_ID=C.MENU_ID
AND B.MENU_ID=D.MENU_ID
AND E.APPLICATION_ID=F.APPLICATION_ID
AND F.APPLICATION_ID=B.APPLICATION_ID
AND A.LANGUAGE='US'
Regards

I need to know the pricing for Team Ready for 10+ users.

I need to know the pricing for Team Ready for 10+ users.

http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/creativesuite/compa nies/pdfs/CCTR-offer-overview.pdf
How to get the Creative Cloud Team Ready offer
This offer is available worldwide through reseller partners under the Adobe Transactional Licensing
Program (TLP). It is not available directly from Adobe. There is no minimum purchase or limit to the
number of memberships you can buy.
http://partners.adobe.com/resellerfinder/na/reseller.jsp

Need to know the simplest workflow for Flash CS5 to iPad

Similar Messages

Maybe you are looking for