Need to know which collaboration room to use for my requirement

Hi All,
I have a very limited idea of KMC. I am in Composite Developement
I have a reqiurement in which a person A needs to invite some other persons to discuss an issue and after the discussion with them needs to take a decision. But any of these persons can be offline. So they may not reply in real time but after they log into the portal. The participants should be able to see the previous discussions which they missed so that they can get info of what discussions has taken place while he/she was away.
Please help me as to which collaboration room i should use for this and some guidance also how to set it up .
Thanks
Points assured for help.

Hi Shobhendra
You can use standard Discussion rooms for ur requirement.
They are basically used for <b>asynchrnous collaboration</b> purpose in which case users might be offline.
For details see
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c7/a20741375cf16fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/b9/9b0c42e1c25f24e10000000a1550b0/frameset.htm
(Award points if found useful)

Similar Messages

I need to know what Adobe version to use for my iPad to fill in and pay forms online

I need to know what Adobe version to use for my iPad to fill in and pay bills online

In the App Store search for Adobe Reader.

Need to know which exit to be used in me21

Hi Guys,
i want to know which user exit to be used in me21 so that
if the PO has a delivery address that is outside the US; then the tax code should be EX and the tax jurisdiction code should be 7777777770.
i had found lots of user exits in me21 but i want to know which one will fullfill my requirement.
i am waiting for ur replys,
regards,
maqsood

by seeing the short description, u need to know which exit is suitable, its just a trial and error method.
the requirement u r telling seems to be like field exit.
u need to take help from basis guy to register first.
then the procedure to create field exit can be seen in below :
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sappoint.com/abap/userexit.pdf

I need to know which install disk to buy for my mac serial number 17*****ZE4

Need to know which install disk to buy since I lost my original.
<Edited by Host>

You have an 24" Early 2008 iMac. It came with Mac OS X 10.5, and you would need the disk set for your specific model. It's possible that if you call Apple Support, they can still sell you a set, but that model of iMac is no longer supported by Apple so Support may not be able to help. If not, then you'll need to look to private sellers or companies that sell obsolete software.
You can also call the online Apple Store and purchase a retail copy of Mac OS X 10.6 Snow Leopard.
Regards.

How to know which BAPi is being used for creation of PO in classic scenario

Hello Experts,
We are in SRM 7.0 classic scenario.
How can we know which BAPI is being used in the calssic scenario i.e. How can we know if we are usind BAPI_PO_CREATE or BAPI_PO_CREATE1 for creation of PO?
Any pointers will be highly appreciated.
Thank you in advance,
Thanks & Regards,
RKS

Hi RKS
yesterday BLOG by our SUMMER WANG helps every SRM consultant to debug the PO error
/people/summer.wang/blog/2010/05/11/trouble-shooting-of-srm-po-transfer-error
Good work Summer wang !!
Muthu

HT4207 I have no archive folder. I have muted a conversation by accident and need to know which folder to look in for any responses to this email? Please help!!

Do I not have an archive file on gmail on the iPhone 5??

Hi Shobhendra
You can use standard Discussion rooms for ur requirement.
They are basically used for <b>asynchrnous collaboration</b> purpose in which case users might be offline.
For details see
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c7/a20741375cf16fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/b9/9b0c42e1c25f24e10000000a1550b0/frameset.htm
(Award points if found useful)

Need Help regarding which Material Type to use for the Scenario

Hi,
Here we are configuring the service scenario.
Suppose Electric Switch of customer flat is not working.
Here in this case I will purchase the switch. And along with service order
I will do the delivery of the Material. Then will raise the Invoice to the customer
with service charge as well as material cost.
Here I will have to run the MRP also for that material to raise the PR if stock goes below
the reorder point.
So I will have to maintain the Purchase view, Sales View & MRP view to that Material.
So in this case which standard material Type can I use for this material? Or I have to create
our own material Type for this material.
Regards,
Pradip

ROH is usually a material type that is supposed to be consumed in production.
HALB is a semifinished good, own produced and meant to consumed in production.
Both are usually not forseen to be sold.
A material that you buy yourself and sell to a customer is a trading good, which is HAWA in SAP.

Need to know which is better and faster for laptop memory upgrade

What is the difference and which is better for a laptop memory upgrade: SDRAM, DDR SDRAM, SIMM? One site suggested DDR SDRAM and BB suggested SO DIMM

SODIMM is the physical form factor of the module, DDR SDRAM is the actual memory type.
SIMMs are an ANCIENT form of memory module. If you have a system that uses SIMMS, you will spend less money throwing your computer in the trash and buying a new one.
Non-DDR SDRAM is also ancient.
Each system can only use one type of memory, i.e. you can't use DDR memory in a system that only used non-DDR memory, and you can't use DDR2 memory in a DDR system.
To find out if the configuration is 2x256 or 1x512, you'll need to look at what is installed.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

I need help from someone regarding what equipment to purchase. I need to know which is the right equipment for what i am trying to set up

I am trying to setup sensors on container cranes at critical points on the cranes, monitoring voltage,vibration,strain,frequency etc. A control room 500m will be setup with labview to monitor the cranes.
I am thinking of going WiFi and using PXI platform. Which equipment to buy is the question? Urgent Help required on making the selection. Strict Budget contraints to carry out the project!!

Since it seems that time and money are of the essence, I suggest contacting a technical sales representative to discuss your application and product selection one-on-one. Tel: (888) 280-7645
or click on "Call me now" on any product page. Good luck finding the right hardware.

Which network is Oracle using for RAC traffic ? where you will get info ? ?

Hi,
I am using two node RAC on Oracle 10g R2 (10.2.0.3.0) version on SUN Solaris 10 . I want to know "Which network is Oracle using for RAC traffic ? where you will get info "
--Kumar

Hi Kumar,
In 10g, you can query x$ksxpia. If the cluster_interconnect information is stored in OCR (default), you will get
SQL> select INST_ID,PUB_KSXPIA,PICKED_KSXPIA, NAME_KSXPIA,IP_KSXPIA from x$ksxpia;
If you specified the cluster_interconnects parameter in your init.ora:
Columns to look in : INST_ID P PICK NAME_KSXPIA IP_KSXPIA
And also you can use 'oradebug ipc' to see which interconnects the database is using:
SQL> oradebug setmypid
SQL> oradebug ipc
Hope it helps...
Thanks
LaserSoft

I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID

Hi, I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID. I'm using Windows, BTW, sorry!

Search your email for the word Logic (and set the search to All) and you should find the receipt (so long as you didn't delete it)
Other than that.. simply contact Apple directly and ask.. Make sure you have your transaction details ready for them as they will need it...
http://www.apple.com/contact/

How can i know which index will be used when executing the query ?

1 ) I have query in which i have 3-4 tables but there multiple index on one column .
so how can i know which index will be used when executing the query ?
2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
3) Please Provide me some document of EXplain plan ?

Hi Jimmy,
Consider the below example
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
CREATE TABLE FIRST AS
SELECT * FROM all_objects;
UPDATE FIRST
SET object_name = 'TEST'
WHERE owner != 'SCOTT';
CREATE INDEX idx_first ON FIRST(object_name);
SELECT *
FROM FIRST
WHERE object_name = 'TEST';
It has not used index
Execution Plan
Plan hash value: 2265626682
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
|* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
SELECT *
FROM FIRST
WHERE object_name = 'emp';
This has used the index
Execution Plan
Plan hash value: 1184810458
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
From this we can come to the conclusion that, whether to use one index or not by oracle
would also depend on the data which is present in the table. This has to be this way as
we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
scan, it would be a performance hit when it searches for the second query ie where object_name
='emp';
2.
If we have a query like below.
select * from emp
where upper(ename) = upper(:p_ename);
Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
Create index idx_ename on emp(upper(ename));
Regards,
Cool

Need to know which upgrade to purchase

I'm staggered that Adobe makes it this difficult to even get advice.
I have been using Photoshop CS3 on a MacbookPro. I recently upgraded (was upgraded!) to Mavericks.
Now Photoshop CS3 no longer works (of course).
I need to know which product to purchase as an upgrade that WILL work. I can't find any sales number to call to ask, or any way to chat with sales personnel. I find a forum to be an extraordinarily time-consuming way to ask what is probably the simplest question out there.

You have 2 choices:
Join the Creative Cloud (monthly subscription) and get the current release PS CC 2014.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Or, purchase the older PS CS6 (the last suite Adobe sold outright).
Creative Suite 6
Understand that if you purchase CS6, it will never get the updates that Creative Cloud users get.
Nancy O.

I see two directories named mozilla and firefox in my ubuntu laptop. May i know which direcotry files firefox uses while running ?

I see two directories in my ubuntu laptop /usr/lib path.
1.mozilla
2.firefox
May i know the reason behind this ? Which directory files do firefox uses ?I am trying to make webx work in ubuntu. Need to know which directory firefox access so that i can define the corresponding soft links in correct directory.
Thanks
Ravi Kiran

You may have installed Firefox before and not realized it.
What files are inside these directories?
I can't say which one Firefox uses because it all depends on how it was installed.

Is there any way to know which Apple ID was used to activat

My father activated my iPad mini about two years ago.
I recently restored it after updating it to iOS 8.0.2
After restoring, it is asking for the Apple ID that was used to activate the device.
Unfortunately my father can't remember the Apple ID he used to activate the iPad mini.
I was wondering if there was any way i can know which apple ID was used so i can access my iPad somehow.
Or if there is any other way possible to activate my device. PLEASE let me know.

Click here and use Apple's iForgot service, or if needed, contact their Account Security team.
If both methods fail and you or he is the original owner, take the device and its original purchase receipt to a physical Apple Store.
(114190)

Need to know which collaboration room to use for my requirement

Similar Messages

Maybe you are looking for