Need to launch Organizer Twice to work with Dual Monitors

If I open a project or either Photoshop Elements 10 or PRE10 and then click on Organizer it loads, but sits in the taskbar below. If I hover over it the AERO Windows (Win 7) pops up showing it's loaded. But It will not maximize. This is when I had last used it on a second monitor so I can easily compare before and afters. However, if I right click on it and close it, then reopen it, it launches perfectly in the 2nd monitor. Does this every time. I ussually leave it open all the time now to avoid this but I don't know how sesitive the catalogs are if the system is rebooted for some reason.
I did no specific configuration for dual monitors, Just dragged it over there when I wanted to use it.
Thanks,
Joe..

Hi Joe,
This is a known issue with dual monitors and got to know that Organizer people are tracking it as a bug for now.
Hope this will be fixed soon.
Thanks
andaleeb

Similar Messages

  • T61 worked with Dual Monitors and now it does not

    I'm having trouble getting two monitors to work. They used to work fine. There have been no changes to hardware. Now the DVI monitor is blank. The DVI monitor does work with other computers (I'm working through a KVM switch).
    T61 running XP Pro
    Docking station
    Worked well in the past
    Took laptop to a meeting and used VGA and Laptop displaying the same information (needed to fool around with a few things to get that to work (FN-F7, Presentation Director, not really sure what worked)
    Came back to docking station and my second monitor does not work anymore.
    Control Panel
    Shows two monitors (1 Bright, 2 Grayed)
    Can select and choose extend on the second monitor (1 Bright, 2 Bright)
    Apply reverts to (1 Bright and 2 Grayed)
    NVIDIA Control Panel\
    Set up multiple displays show choice is Only use one display (Single)
    Second monitor choice is grayed
    Presentation Director
    No option is shown for two monitors
    Laptop and monitor choices exist
    BIOS Display
    Tried Internal and PCI options (no joy with either)
    Display is set to VGA & DVI
    Any suggestions??

    The docking station is a type 2504. I have both the VGA and the DVI port hooked up to identical flat screen monitors. I have no intention of messing with that because the setup is working successfully via a KVM switch. Both ports and both monitors are working. However, there is a problem with swithching modes with the Lenovo laptop. The problem does not exist with any other computer working through the KVM switch.
    Please note that:
    this Laptop on this docking station, at my home, with all wiring and monitors unchanged, has worked for a long time.
    I took the laptop off the docking station, went to a meeting, hooked up to a projector, and successfully configured the laptop such that the laptop screen and the projector were displaying the same screen at the meeting.
    Then, I brought the laptop back to the same old docking station at my home and tried to regain use of my dual monitors unsuccessfully.
    Using Control Panel display, and all sorts of combinations of NVIDIA Control Panel, the 2nd monitor would not be consistently detected by NVIDIA Control Panel. During these attempts, on a few occasions, I had an option to Set Up Multiple Displays in NVIDIA Control Panel; but there was no success in choosing this option. Returning to NVIDIA Control Panel / Displays would not present Set Up Multiple Displays as a valid option (not present or greyed - can't remember). I even went through permutations with the laptop screen open and closed, warm boots, cold boots, searchign for new hardware, etc. Nothing was successful.
    Although changing the display within Windows Control Panel / Display was an option, any attempt to extend or replicate the dispay on the second monitor would fail and Windows Control Panel / Display would go back to the single monitor configuration was not successful and effectively ignored by both Windows Control Panel / Display and NVIDIA Control Panel.
    You may note the use of past tense. I simply gave up and went to doing productive work on one monitor. After a few weeks, I went back to NVIDIA Control Panel and the second monitor was detected.  I was able to Display / Set-up Multiple Displays via NVIDIA Control Panel. Subseaquently, I was able to use Windows Control Panel Display to enable and configure the second monitor and both monitors started working again (without having made any changes to wiring etc).
    I don't believe there is any difference in how I used NVIDIA Control Panel on this successful attempt than in any of the earlier failed attempts. There seems to be some sort of a problem with getting the Lenovo to recognize that the second monitor is really there. Please addess this part of the problem as I expect to repeat the process in an upcoming meeting with this laptop.
    Thank you for your attention.

  • I'm working with dual monitors but can't get it to boot up on my main screen, so all my icons get messed up

    Hey all,
    So I have a Mac Pro at work and it's connected to a 30" monitor and a smaller monitor. I have the larger one set as the primary screen, but when the computer boots it always uses the smaller monitor as the primary, load all my icon on the smaller monitor, then finally swaps everything to the larger monitor. This messes up all my icons on my desktop since they go from placment on a smaller screen then back to the larger one.
    Is there any way to force the mac to boot up with the larger monitor? Or not screw up all my icons?

    Yes.
    A previous attempt was made through my home network, but after much name-calling at the tech support (dude wasn't listening to me) for the print server I bought (which SAYS they work with Mac... such BS), I gave up on that and hooked it back up to the PC. it worked fine. ButI want it to work with the Mac. It should be able to.
    So, now it's hooked up, via USB, directly to the Mac. I love this MF printer... it's the one one I could find a the time that did everything I wanted... and I wouldn't go back to HP, even if they paid me. (that's what I had before)
    Thanks
    A.
    iMac G5   Mac OS X (10.4.10)  

  • I just got an iPhone 4 as an upgrade from the original iPhone 3.  I came home and tried to sync it with my iTunes and it says I need to upgrade my iTunes to work with the 4.  The current version of iTunes isn't compatible with my G5 mac?????

    I just got an iPhone 4 as an upgrade from the original iPhone 3.  I came home and tried to sync it with my iTunes and it says I need to upgrade my iTunes to work with the 4.  The current version of iTunes isn't compatible with my G5 mac?????  Help

    Return it.
    The requirements are on the box and on the website:
    Mac system requirements
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10.1 or later (free download fromwww.itunes.com/download)
    iTunes Store account
    Internet access
    http://www.apple.com/iphone/specs.html

  • Ok.  I hope someone can answer my question.  I am new to photoshop.  I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - includi

    ok.  I hope someone can answer my question.  I am new to photoshop.  I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - including the adobe "instructions" seems to work.  How can i get this software in a downloadable format? is it actually free - I'm assuming it is...  Hope someone knows the answer to these questions...

    The download itself is free and is valid for 30 days only.  After that, the software ceases to work.
    CS4 is pretty old, no longer sold and no longer supported by Adobe.  It's also not compatible with many modern OSes.
    Why do you have to work with such an obsolete version of Photoshop?
    What kind of "designer" uses it?

  • Is Flash CS6 download still available to CC subscribers? I need to create a SWF to work with AS2.

    Is Flash CS6 download still available to CC subscribers?
    I need to create a SWF to work with AS2.

    Get CS6 Apps from Cloud Subscription:
    Download previous versions of Adobe Creative applications -
    http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

  • I cant upgrade camera raw and need to to be able to work with new camera files  why?

    i cant upgrade camera raw and need to to be able to work with new camera files  why?

    Boilerplate text from Best Practices FAQ
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
        * Adobe product and version number
        * Operating system and version number
        * The full text of any error message(s)
        * What you were doing when the problem occurred
        * Screenshots of the problem
        * Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

    Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

    try xxx - may work
    _may_ work.

  • Will it work with a monitor...

    will the new macbook air work with a monitor as I see it has a touch screen? This will be my primary computer as I like that it is small and light.

    will the new macbook air work with a monitor as I see it has a touch screen?
    Confusing question line.
    The macbook air does not have a touch screen. (or did I miss that?) It has a multi-touch track pad.
    The mabcook air can be used with external monitors via the mini DisplayPort / Thunderbolt port. Provided with the right adapter many displays can be used. Like Niel said.
    Using an external monitor which has a touch screen would hinge on that monitor being supported by OS X and/or drivers / a utility for that screen.
    It can be done, but is either expensive - Cintiq displays comes to mind - or experimental.

  • Swap axes doesn't work with dual axes chart types

    Dear Colleagues,
    I noticed that the function to 'swap axes' doesn't work with dual axes chart types.
    This could be added as a hint to the Application Designer Guide, since it is not mentioned there.
    Thanks, Katharina

    Hi Katharina,
    I recommend making this suggestion to a documentation update on Idea Place at ideas.sap.com
    I like suggestions to the Help myself, something we should all do more often in my opinion
    Tammy

  • E440 not working with external monitor via onelink dock

    My brand new E440 is not working with my monitor when connected via the dock, however it is working when plugged straight into the laptop. I have tried using another E440 with the dock and monitor, this set up worked flawlessly.
    Any ideas on how to fix this probllem?
    Thanks

    I sent it in for repair. Came back and it was still not working. Im waiting for lenovo to get back to me on it.

  • [SOLVED] openbox margins with dual monitors

    Hi community,
    I have stumbled to a nasty problem on my first incursion to dual monitors in openbox.
    I'm using xrandr with this command (which works just fine BTW):
    xrandr --output LVDS --mode 1280x800 --primary --output VGA-0 --mode 1280x1024_60.00 --gamma 1.0:1.4:0.85 --right-of LVDS
    and have set a Virtual screen in xorg.conf of 2560 x 1024 pixels.
    But, my laptop monitor only handles 1280x800, while my external LCD monitor has 1280x1024, so there is a virtual area under my laptop screen which i'm not using, but i dont really care about that.
    The problem is that when I'm setting screen margins, so that maximized windows will respect the panels in the bottom (tint2), in rc.xml (or by obconf) the margins are applied to the virtual screen and only are practical on the external monitor wich has more pixel height.
    I'm really missing some kind of per monitor margin settings in openbox, maybe there is and i haven't found it? It makes me wonder because openbox can maximize windows to a single monitor, even if the whole layout it's treated like a virtual screen, so it has some way of distinguishing between them.
    I would appreciate any suggestions, thanks.
    Last edited by andreamer (2010-07-26 18:32:15)

    TL;DR - I'm not aware of any acceptable solution at the moment.
    Basically, what you're having problems with, is the "dead area." It can really be quite a pain in the butt if window managers or other screen aware applications don't anticipate it properly. To my knowledge, Openbox doesn't support margins on a monitor-by-monitor basis. In reality, you shouldn't need to be setting margins anyway. Tint2 should be reporting itself as a taskbar, and Openbox should be respecting that.
    I have dead area too, with multiple monitors, and Openbox respects both of the KDE taskbars I have running (one on each monitor). (I use KDE and simply replaced Kwin with Openbox.) This tells me that tint2 should be able to cooperate with Openbox. I remember trying tint2 a while ago, and didn't fine it adequate in a dual monitor environment (it was probably a year ago or so). tint2 would need to be setting the _NET_WM_STRUT_PARTIAL hint, and I'm not sure if it is (or if it's doing it properly). See http://standards.freedesktop.org/wm-spe … #id2507618
    Also, I do know that the developer for Openbox recently got a dual monitor setup, and she's been adding additional support for dual monitors a little at a time. Hopefully with 3.5, there will be a lot more support. (Margin support for multiple monitors would be great, because it could be a good utility knife for applications that don't care about multi-monitors setups and don't set the proper hints.)
    If you're capable of modifying tint2, my course of action would be to try something that works (like the KDE taskbars) and record the hints being set there. Then compare them with tint2 and try to mirror KDE's setup. (If you're a programming lacking experience with X and related nonsense, I'd be more than willing to offer what guidance I have.)
    Also, I developed a panel myself (and got pretty far along) using the PyGTK toolkit... But I can't remember if I solved this problem or not. I'll try to check it out and get back to you. (I got as far as implementing a widget system that includes a task list, system tray, clock, menus... It just isn't polished very well. My original intention was for it to be a more robust PyPanel with dual monitor support.)
    Last edited by BurntSushi (2010-07-24 22:46:23)

  • Gnome Crashes on Login after messing with dual monitor settings

    Gnome displays the sad monitor and has the error message "..something has gone wrong..~" and will force me to log out. I've only started to experience this after messing with dual monitor settings in nvidia. The dual setup(twinview) worked but once I rebooted, I couldn't get it going for awhile.
    Here's my xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 285.05.09  ([email protected])  Fri Sep 23 19:18:19 PDT 2011
    Section "ServerLayout"
        Identifier     "Layout0"
        Screen      0  "Screen0"
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
        # generated from default
        Identifier     "Keyboard0"
        Driver         "kbd"
    EndSection
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "Unknown"
        HorizSync       28.0 - 33.0
        VertRefresh     43.0 - 72.0
        Option         "DPMS"
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
    EndSection
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
       #Option         "TwinView" "True"
       #Option         "MetaModes" "nvidia-auto-select, nvidia-auto-select"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    I commented out below to get it in again, but it still feels shaky and unstable to log in now. Sometimes I will get the error and after a log out and login, it'll work.
      #Option         "TwinView" "True"
       #Option         "MetaModes" "nvidia-auto-select, nvidia-auto-select"
    Extra Notes: I have another desktop session with awesome installed(uninstalled now) and could log into that no problem. Awesome was giving me troubles so I uninstalled it. I have 2 gnome desktop sessions, my regular gnome session(the one that crashes), and the other with no window manager(never crashed on startup).
    I installed awesome around the same time as configuring the dual monitor setup.
    Thanks.

    Update.
    The crashes are to be expected now. I'm circumventing the whole thing by logging into my other Gnome session without a window manager, logging out and then logging back into my regular Gnome with Metacity.
    I've noticed the tty1 sessions(not sure what's it's called) is strange. Apparently my session runs on tty8 but when I try logging in, it'll crash me and tty7 gives me a blank screen with a blinking underscore. The other tty1s work regularly. Not sure if this has anything to do with it.
    Is there a way to just reset the Gnome settings?

  • Unwanted keyboard shortcut with dual monitors

    Problem:
    I have a computer setup with dual monitors (desktop extended). When I have a window open, e.g., Microsoft Word 2007, after I type "1" on the keyboard, the Word Window and mouse relocate to the second monitor. When I type "2" the Word window and mouse relocate
    to the main monitor. In the word document, 1 and 2 are typed in the document, but pushing the keys still move the window and mouse to the opposing monitor.
    I checked the keyboard settings within Windows and found that sticky keys and such are not enabled. The keyboard has no such features to enable. I also checked the display setup in display properties and found nothing that would indicate such a setup. Google
    searches return nothing related to my problem.
    What I do know:
    -The rest of the numbers on the keyboard work fine. Pressing 1 and 2 on the number pad at the far right of the keyboard do not transfer the active window to the second monitor. Those keys work fine.
    -The type of window does not matter. Using notepad, word, excel, internet explorer, sticky notes; all of those windows would transfer to the opposing monitor when I push 1 and 2.
    Setup:
    Windows XP
    Dual-Monitor
    Wireless Keyboard and mouse

    This pertains to StarTech DVI to USB adapters.
    There's an icon in your system tray near the clock, either super utility or usb display device. Right click, and select multi display control panel.
    10:20:14 AM
    There's a button to disable as long as you have the newer driver from their website. The old drivers had a bug that caused this button to not work

  • Interfacing with dual-monitor machine

    Hello all--
    I've got a G5 at home with dual monitors on which I run 3D animation software with lots of panels. I'd like to be able to control the G5 from work using a laptop (possibly also connected to an external monitor). Is it possible to display both screens of the desktop using ARDv3 on the laptop? Some users have mentioned they can do this but the size of the remote screens is unsatisfactory. So, again, can you visualize both screens well via the remote computer?
    Thanks for any help you can offer.

    you can view both screens at once but it will be scaled to fit on the screen you have... so what you see is dependent on the resolution of both client monitors and your admin computer's monitor.
    you can also select to view a single monitor of the client computer.
    i've never run ARD admin on a computer with 2 monitors so i'm not sure how it handles it but i'm guessing that you can view both monitors on both admin monitors.... it'll probably scale down or up dependent on resolution.

Maybe you are looking for