Need to learn the very basics on getting started

Hi, I just got home with my super new iPad Air Wi-Fi + Cellular and have completed all the setup questions. After entering my password I get the initial screen with standard apps but when I tap any of them nothing happens. Battery is fully charged and in the top left corner it shows 'No SIM and the Wi-Fi symbol. I hope this is me just being a bit dumb and would appreciate some advice.
Thanks.

Looks like I neglected to post the link: http://help.apple.com/ipad/7/
As to your questions: Google apps will not run on an iOS device. You must download then from the app store. No exceptions. Alternately, you can download them to itunes on a computer and sync to the iPad.
As for troubleshooting the App store issue, try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Similar Messages

How can learn the very basics of Pixelmator?

How can I learn the very basics of using Pixelmator? I have no graphic arts experience beyond WOrd Art which I've used to design t-shirt graphics. Although I had been encouraged to by Photo Shop, I wanted a smaller $ step into graphics art and was introduced to Pixelmator.
But I don't even know enough about how to start creating my ideas....e.g. how to even create artful text...... Pixelmator has a good learning site, but all of their tutorials seem to assume a basic knowledge of this kind of software.
My sister suggested I try to hook-up with a tutor through an Apple Forum....
Suggestions please?!

The folks at PixelmatorTutorials.net have in my opinion the best tutorials to date for those who want to learn image editing. They have a series of tutorials called back to basics and these go into the details of image editing. Explaining everything from what a pixel is, to how it gets its color etc. They also explain the app itself in detail. I'd recommend following them. They usually pubilish 1 to 2 tutorials a week. They have some handy tips in every tutorial I watched so far. Like shorcuts that I never knew existed and are not even mentioned in the Pixelmator manual.
The link: http://pixelmatortutorials.net
Good luck.

Should I download and install the latest version of Adobe Flash to use with Lion? My need for Flash is very basic: Google Maps, YouTube, and content on certain websites. Thanks for any help you are able to provide.

Should I download and install the latest version of Adobe Flash to use with Lion? My need for Flash is very basic: Google Maps, YouTube, and content on certain websites. Thanks for any help you are able to provide.

Thanks for the speedy reply. I have read so many comments about Flash being incompatible with Lion I was wondering whether to download it or not. So many sites on the Web still require flash, however, you almost don't have a choice but to download it even if it is incompatible. I gather a better version of Flash will be available for Lion soon. Again, thanks for the help. I will download the latest version of Flash.

I have lost the use of my extension pannels, and need help recovering the use. I get a message that extensions failed to load. Why?

I have lost the use of my extension pannels, and need help recovering the use. I get a message that extensions failed to load. Why?

I've had that before when on a really slow Internet connection.

Dev server the dispatcher is not getting start

Dear all ,
We are facing problem in dev server the dispatcher is not getting started. Plese suggest
The log file .
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Mon Oct 05 08:43:39 2009
B create_con (con_name=R/3)
B Loading DB library 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'G:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno      00
M sid        DEV
M systemid   561 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    247
M intno      20020600
M make:      multithreaded, Unicode, 64 bit
M pid        4936
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4936) [dpxxdisp.c   1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm)          38064     (1464)
M DpShMCreate: sizeof(tm_adm)          3609968     (17960)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          312000     (624)
M DpShMCreate: sizeof(vmc_adm)          0     (512)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000D440050, size: 4077792)
M DpShMCreate: allocated sys_adm at 000000000D440050
M DpShMCreate: allocated wp_adm at 000000000D441C30
M DpShMCreate: allocated tm_adm_list at 000000000D44B0E0
M DpShMCreate: allocated tm_adm at 000000000D44B110
M DpShMCreate: allocated wp_ca_adm at 000000000D7BC680
M DpShMCreate: allocated appc_ca_adm at 000000000D7C2440
M DpShMCreate: allocated comm_adm_list at 000000000D7C4380
M DpShMCreate: allocated comm_adm at 000000000D7C43A0
M DpShMCreate: allocated vmc_adm_list at 000000000D810660
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000D810690
M DpShMCreate: allocated wall_adm at 000000000D8106A0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Oct 05 08:43:40 2009
M calling db_connect ...
C Prepending E:\oracle\DEV\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 000000000EE4FF20 000000000D0CDA90 000000000D0CD3C8
C Attaching to DB Server DEV (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C Starting user session (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78,usrhp=000000000EE71C70)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4508]
C Detaching from DB Server (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    11395]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 000000000EE4FF20 000000000D0CDA90 000000000D0CD3C8
C Attaching to DB Server DEV (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C
C Mon Oct 05 08:43:41 2009
C Starting user session (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78,usrhp=000000000EE71C70)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4508]
C Detaching from DB Server (con_hdl=0,svchp=000000000D0CD298,srvhp=000000000EE67F78)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    11395]
B ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#3 @ 1199] [dbsh    1199 ]
B ***LOG BY2=> sql error 1033   performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9708]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server DEVDEV_00 on host DEVDEV (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Mon Oct 05 08:43:41 2009
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9893
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4936) [dpnttool.c   357]
Regards,
Kumar

Hi Sunny,
Thanks , i have try to stop the database and then startup the database. Then it is giving me error
SQL> startup
ORACLE instance started.
Total System Global Area 1109237592 bytes
Fixed Size                   737112 bytes
Variable Size             587202560 bytes
Database Buffers          520093696 bytes
Redo Buffers                1204224 bytes
Database mounted.
ORA-01113: file 3 needs media recovery
ORA-01110: data file 3: 'I:\ORACLE\DEV\SAPDATA3\DEV_1\DEV.DATA1'
Please suggest what next command to recovery database in oracle 9i.
Thanks,
Kumar

How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
Philipp

Philipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application!

I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?

I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?

That error message suggest you have a permissions issue. Make sure you have full read/write privileges for the Drive/ Folder location that you are copying the files to.

Help needed in learning the basics of Java Smart Card and implementation?

Hello every body,
I am trying to develop the applications on java contactless smart cards technology.
Can any body give me the details like how to start?
What are the required softwares and installation procedure and path settings and etc.?
I am the beginner in java smart card application development.
plz help me out

Dear Friend,
I would advice to divide learning into two main parts: JavaCard technology and contactless RFID cards. For JavaCard technology you can find useful articles on Sun web-site (developers.sun.com/mobility/javacard/articles/javacard1/). For contactless RFID you can find few useful books at Amazon. Regarding software you need JC development kit. How to install it there is an instrunction in JCDK user guide.
If it is not a secret what a javacard contactless card you are going to use in your work?
Yours
Dmitri

Questions on the very basics of setup

I'm helping a "friend" setup his MacBook Pro (a likely story, I know). he has an AirPort Extreme and wants to connect to the internet using his DSL box. All the cables are correctly connected, I believe. Went through the procedure of using the AirPort Setup Assistant (creating network i.d., password, etc.). When we click "connect", the left AirPort light flashes periodically as it's supposed to, but we get the following message after a few moments:
"could not find a PPPoE server"
I presume that means that we need to install the DSL software on the machine. Is that correct? Should this be an "easy" fix or do I have to consider other things in order to get to the internet?
I do apologize if this is a re-run question, but I didn't see it in the forum. Thanks for any guidance or reference to other links in the forum.....

Just as a hunch, and I'm new to this support site as well, but I'd go check out the Airport Forums, and see if there is this info in there already. That being said, from what I understand and have experienced, some adsl modems work in dummy mode, where the router/airport device actually prompts the information through it, and some have their own dhcp server with all that username/password,ect, stuff in there. One thing you may have to do is connect the modem directly to your ethernet port on your computer, and go into your webbrowser and type "192.168.1.1" into the address bar and press enter, this should give you your dsl modems configuration page, from there you'll have to figure out which option you can go with. What i've seen a few times is a modem that has to have the username and password setup, and also has basic network configuration, and then a router, which has to be setup for dhcp as well, with no username and password info involved. What makes this more confusing, is sometimes both the router and the modem are set to use the same default address for themselves. Try checking out the documentation on both the airport, and whatever information you can glean from your isp about your modem. If this all sounds like nonsense to you, I'd just check into paying your isp to send someone to set it up, or some other knowledgeable networking tech. Good luck

My screen went completly yellow green color took forever to get it to power back on do i need to take the phone back and get a new one?

Does any know why the screen turned completley yellow when my battery died??? I just got the phone today and wanna know do I need to return the phone I fixed it after I youtubed how to fix it! Will this keep happening??

Just get it exchanged.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Need information on the very first certification exam - PL/SQL

Hi all,
I am about to enter the OCA track.
Need to appear for the very first exam.
Please let me know somethings like -
1. begineer's book, and pdf with any one, please pass it
to [email protected]
2. what is the name of the certification guide ?
3. Whts the exam code ?
any other information is welcome
Thanks in advance.

This is my understanding
to become a OCA - dev track one needs to pass
1Z0-001 or 007 and 147.
but the 001 has expired
so the 1Z007 + 1Z0-147 = OCA ( dev track )
and after that if i give 141, i will be OCP - dev track
is it ok ?
thanks

I'm a Newbie - Hi!: what is the best way to get started?

Hi,
I'm retired but used to be a Senior Design Engineer with an aerospace components manufacturer. The questionnaire didn't ask if I was retired!
I have a basic working knowledge of computers and applications but I struggle with jargon, (i.e. I prefer the simple approach).
My copy of Photoshop Elements 12 arrived yesterday. I've just finished installing it!
The instructions were quite clear as far as the installation went but I got a bit lost when the booklet started with the "Create an Adobe ID"
It didn't seem to give any direction. Any way somehow I managed to get here in the end having registered my product (twice - because I didn't see any activity after I hit the button the first time!).
I own a Sony Alpha SLT A57 camera and also a Casio Exilim FH100 although the Sony is my weapon of choice for the most part.
I'm on a basic photography course which leads to an intermediate and then ultimately an advanced course. I also hope to follow on with courses that have been set up for Photoshop Elements too which are also available.
I will be feeling my way for a while yet and I would appreciate some help (which will be needed inevitably).
First of all, what is the best way for a guy with only basic skills to get started?
Is there a page I can go to for help from first principles?
I look forward to being a part of this community!

Help> Getting Started is a good starting point, as is Adobe TV - Quick Links to Elements Adobe TV Tutorials.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

I have a new iPad 2. Is the only way to Get started to connect it to a laptop or computer to download I tunes

I have a new iPad 2 and have regiistered with
AT&T for the data. When i start the iPad all i see is an indication that I need to connectr to a computer and download iTunes. Is that the only way to get it started? There are no icons at all

You can download a complete iPad 2 User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad 2 - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

How to post a XCelsius in the BPC Web Application Getting Started page

Hi Experts,
I'm new using BPC 7.5 on NetWeaver. When opening the Getting Started tab in the BPC Web Application there is a white page that I would want to fill with content. This content should be a XCelsius Dashboard linked to the Query or InfoCube on which I`m planning. Creating the XCelsius Dashboard is not the problem, but to insert it in the Getting Started panel of the BPC Web application. Has anyone an idea how to do it or how to proceed. Ideas or a little how-to would be perfect.
Thanks very much in advanced,
Àlex

Hi.
Try this...
const string LIST_PAR_NAME = "lu";
string listName = string.Empty;
if (this.Request.Params.AllKeys.Contains(LIST_PAR_NAME))
listName = this.Request.Params[LIST_PAR_NAME];
else
throw new ArgumentException("Par lu is not present.");
SPList listExport = web.Lists[listName];
However take a look at this
http://zsvipullo.blogspot.it/2013/10/get-splist-from-internal-name.html?q=getlist
to check how GetList method is faster than web.Lists[].
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it.

Login to SQL Developer as the SYS user for Getting Started tutorial

I went to try and do the following tutorial to learn about SQL Developer 3.0, but I cannot get started because I'm unable to perform Prerequisite #3.
How do I "Login to SQL Developer as the SYS user"?
Dave
Getting Started with Oracle SQL Developer 3.0
Prerequisites
Before starting this tutorial, you should:
1 .
Install Oracle SQL Developer 3.0 from OTN. Follow the readme instructions here.
2 .
Install Oracle Database 11g with the Sample schema.
3.
Unlock the HR user. Login to SQL Developer as the SYS user and execute the following command:
alter user hr identified by hr account unlock;
Note: This tutorial is developed using Oracle SQL Developer 3.0.
4 .
Download and unzip the files.zip to a local folder on your file system. In this tutorial, we use the C:\sqldev3.0 folder.

I installed XE. It asked me to set up a username and password during the install.
How do I login as the SYS user, though?
There is a Connection Name, Username, and Password field when I try to set up a connection in SQL Developer, and I used the username and password I made during the install. I clicked the Test button to test the connection.
I see "Status: Failure -Test failed: ORA-28009: connection as SYS should be as SYSDBA or SYSOPER".
How do I tell SQL Developer "as SYSDBA or SYSOPER"?
Sorry, this is probably easy, and I'm just clueless about it.

Need to learn the very basics on getting started

Similar Messages

Maybe you are looking for