Need to load only few sales orders from ecc to bi 7?

Hi all,
there were couple of sales orders is missing for a particular day? we need to load it. there was deltas from the psa to the ods.
how to load from psa to the ods when there is deltas!. using the dtp?
what is the process to carry out loading a particular records from the psa to the ods without affectingthe deltas in bi 7?
can anyone pls help me on this!!
Thanks
pooja

Hi Pooja,
Have you loaded any data to DSO till now?
If not i hope you might be having two requests in PSA if you have done one Full & one Delta load in Infopackage??
(or) might be one if you have done only one Full Load.
Follow these steps if you have notyet loaded any data to DSO:-
Now create a DTP> right click on the DTP folder>create DTP--> here you can either select FULL or DELTA load since everything will be DELTA for the first time & all the data will be loaded.
Follow this if you already having any requests in DSO:-
You might have done FULL DTP for the first time
So now create a net DELTA DTP & Execute so that only new Delta records will be loaded.
Hope it helps!
Regards,
Pavan

Similar Messages

Replicate sales orders from ecc to crm

Hi experts,
We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
thanks in advance
Andy

Hi,
To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
You can search the forum for a detailed document with special focus on the integration points.
Also have a look at the following SAP HELP link:
http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
Hope this helps.
Thanks,
Samantak.

Error while transferring SALES ORDER from ECC to SCM

Hi Experts,
I am working with SCM4.0 and ECC 5, while i transferring the sales order from ECC5 to SCM ,it encounters with the following errore message.
<b>Sales order M-10 1000: Integration model does not contain material master
Message no. XC100
Diagnosis
To ensure a consistent dataset in SAP APO, the material master data for filter object Sales order M-10 1000 also has to be known in SAP APO. In the current case no entry was found for the combination in the models that were checked.
System response
Object Sales order M-10 1000 cannot be transferred correctly.</b>
Any kind of suggestions would be appreciated well.
Thanks in advance..
Regards,
A.Fahrudeen

Hi Fahrudeen ,
I hope the master Data like Material and Location and Customer are not CIFed to APO prior to Sales order or else while ciffing the sales order you have not selected the sales order radio button and same time only enter the Material ,location and customer wothout the tick on filter objects for Mat/Loc and Cust.
Hope this helps..
Regds// Digs...

Urgent : transfer of custom fields of a sales order from ECC to CRM

Hi,
We have a sales order which will be created in CRM and replicated to ECC.
We have added some custom fields in table VBAK, which we are displaying in the sales order additional data tab B. When the user saves the sales order,we need to transfer the fields back to CRM.
We are aware of the the BADI CRM_DATAEXCHG_BADI.
Also i think we need to conisder the structure BAPIMTCS but not sure how exactly we can use it.
On the CRM side these Z fields exist in the structure BAD_BUS_TRANSN_MESSAGE-CUSTOMER_H of the method CRM_DATAEXCH_R3D_MBDOC_FILL.
Can someone guidde us on how exactly do we transfer the value from ECC VBAK-Z* to CRM value BAD_BUS_TRANSN_MESSAGE-CUSTOMER_H.

Hi Sameer,
Thanks for the document.
I tried doing the same steps recommended(in the document it was for a customer). However i dont think my values from the ECC side are being passed to the CRM side.
I created a new Z structure and passed it via BAPIMTCS, but on the CRM side when i tired retrieving my Z structure,i dont think the system found it.
There are 2 BAPITCMS structures, t_table_info and the other t_bapistruc.
Do you know which one we need to fill up?
Thanks,
Neil.

User status transfer for sales orders from ECC to CRM

Hi,
We use business process with CRM sales orders that are transfer to ERP.
Users can change user status in the sales orders in ERP.
How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
What is the steps to do this for CRM 7.0?
Denis

Hi,
We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

Mass change - Move existing sales orders from Sales org A to Sales org B

Good morning dear network,
am seeking for your guidance on one specific matter.
We are in the process of making changes to our billing / organisational structure (new sales orgs)
One of the challenges is that we need to move existing open sales orders from one sales org to another (new) sales org.
If all master records exist in the new sales org, is there a (technical) way of moving the existing sales orders from the current sales org into the new sales org, without having to replace each order individually ?
would welcome any suggestions.
Many thanks

I would recommend to close the existing open sale orders by assigning Reason for Rejection and create new sale orders in the newly created sales organisation.
This is due to the fact that you need to ensure each and field in the existing sale orders to match with the newly created sales organisation and it is bit time consuming.
Still if you prefer to what you had indicated, LSMW is the better option
thanks
G. Lakshmipathi

Sales orders from one salesorg. to another in same ssystem

Hi Guys,
I got a requirement like we need to convert or recreate sales orders from one sales organization to another sales organization in the same system without having any impact on the existing system.
Any one have idea how to do it and is there any standard program to do this? is there any standard procedure for that>?
Thanks in advance.
Ram sri

Hi Ramgopal,
I never had this scenario, but the main step would be
Define 2 logical systems: a sender and a receiver
Assign one of them to the client
Set up distribution model
Generate partner profiles
Set up converter (not filter!) /Application Link Enabling (ALE)-> Modelling and Implementing Business Processes-> Converting Data Between Sender and Receiver
Here you can set up conversion rule for your sales org field.
All of this step could be done in transaction SALE.
Regards,
Peter

Delete sales order from MD04 screen

Hi Gurus,
Need help in deleting a sales order from the MD04 screen.
The sales order was deleted, there are no production order/reservations associated with this Sales order, the sales order is still appearing on the md04 screen and consuming the stock. Ran MRP both in Netchange and Regen mode still the sales order appear on the MD04 screen.
This is a four months old sales order.
Thanks
Srini

Hi Aravind,
No problem, I found some notes online.
Executed the program SDRQCR21 and deleted the sales order.
Thanks for your help.
Regards
Srini

Load Sales Order from Xml file

Hi,
I want to load a sales order from xml file. How can I do so? Where I'll get the xml schema for Sales Order or other documents (delivery,invoice etc)?
Plz reply with code and xml file.

When I'm going to load SO from xml file, it's showing an error:
"The connected value 0 was not found in table Uasge of Nota Fiscal".
What is this table for? Which attribute is related with this table?
How can I find out that?

I want to load a sales order from xml file. How can I do.

Hi,
I want to load a sales order from XML file. How can I do ? how can i create the sales order?
what are the necessary setting for create the sales orders.
with Regards,
Prakesh.

Three options come to my mind.
Option 1: Use SAP transaction SXDA_TOOLS (Object Type BUS2032), Program Type (BAPI) and Program (CREATEFROMDAT2).
Option 2: Use SAP transaction SXDA_TOOLS (Object Type BUS2032), Program Type (DINP) and Program (RVINVB10).
Option 3: Translate the xml to IDoc so that ORDER04 / ORDER05 Idoc can be used to create Sales order (WEDI transaction).

Need to create sale order from the flat file & mail has to be sent

Hi Experts,
I have a requirement to create a sale order from a flat file and once the oder is created, mail has to be sent to customer as well as to internal user with the order details. I want to know how this process can be implemented and what adapters are needed to execute this.
it would be very helpful, if i get an step-by-step procedure.
Points assured for any helpful answers.
Thanks in Advance
Jai

HI Jai,
You need to create two interfaces as file will be sending the Sales oreder details that you need to capture in IDOC or RFC and then have to trigger to create the sales order. For this Standard BAPIs are also available.
These RFC or BAPIs will response with Sales order details that you need to divert to Mail adapter with the use of BPM and also have to go for Async to Sync bridge.
File -
>XI (BPM) ---> BAPI/RFC (Request)
MailAdapter <- XI (BPM) <--- BAPI/RFC (Response)
For this refer below links for step by step
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
If you will use IDOC then In IDOC inbound processing you need to trigger for Sales order creation and then have to send the Sales Order generated IDOC as an Outbound to Mail Adapter
Flat file -
> XI ---> IDOC
IDOC -
> XI ---> Mail
This will be bit easy scenario to develope as compare to using BAPI with BPM
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
configuring IDOC-XI-Mail scenario using following web-log:
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
Thanks
Swarup

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

SAP Mobile Sales 2.0 delta load issue for Sales Orders

Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad.

Replication of Sales Order from SAP ECC to SAP CRM

Hi,
The scenario I am working on is breifly as under:
Telesales will create sales order directly in ECC. The sales order created in ECC will be replicated in CRM. I have some queries and request guidance:
1. The same sales order type will be used by ECC for creating orders from telesales, as well as regular sales orders in ECC. I need to replicate only sales orders created by telesales. Please guide how to achieve the scenario requirement.
2. There are many 'Z' Partner function in ECC in sales order, some of them are mandatory and others are optional. During replication, if the 'Z' partner functions are not created and maintained in CRM, what will be the impact? Will the sales order replicate or no. Impact in sales order replication of mandatory partner function and optional partner function not available in CRM.
3. Impact of 'Y' and 'Z' condition type (optional) not maintained / imported from ECC to CRM in sales orders.
Regards,
Rajesh

1. In R3AC1 set filter according to your needs for object SALESORDER. There are quite a few fields on which you can set filter.
2. Partner functions will not affest replication. Replication is more strict from CRM to ERP hen viceversa. Also you said that optinal partner functons will be missing, so there is no reason that problems should accore. But of course standard sold-to party and shi-to party should be provided for pricing reasons.
3. Should reprsent not problem, but pricing procedures must be synchronized between both systems.

Creating ERP Sales Order from CRM 7.0

Hi Experts,
We are implementing the scenario-Creating ERP Sales Order from CRM. My doubt is:-
Do we need to download the entire product data from ECC via middleware to implement this functionality?
Is it possible that we manually create few products in CRM with same heirarchy and category and avoid middleware data download?
My basic doubt is-what product information is passed to ECC from CRM when we create the ECC Sales Order? If only product id is passed, then we can avoid middleware data download for product from ECC to CRM.
Can anyone please provide me some pointers on this? What should be the approach-download product data from ECC to CRM or manually create product data in CRM?
Thanks and Regards,
Rohit

I´m trying to figure out the ERP Sales Order Scenario in CRM, i found the following link (sap.help) to customize the ERP sales Order in CRM, it´s a quickly guide supported by SALESPRO but in my case does not work, if somebody knows how to retrive the Order in IC i´ll appreciate.
Here a quick Guide -->
Prerequisites
You can directly create and change an ERP sales transaction in SAP CRM once you have carried out the following:
You are using SAP ERP for your Quotation and Order Management.
You are using SAP CRM.
You have assigned the relevant ERP sales transactions to a profile.
You do this in Customizing for CRM, by choosing Customer Relationship Management Transactions Settings for Sales Transactions Define Profile for ERP Sales Transactions .
You have defined an RFC destination.
You do this in Customizing for CRM, by choosing Customer Relationship Management CRM Middleware and Related Components Communication Setup Define RFC Destinations .
You have defined a business role by copying the standard business role SALESPRO to your own. You make this setting in Customizing for CRM, by choosing Customer Relationship Management Business Roles Define Business Role .
You have defined cross-system copy control of transaction types.
You do this in Customizing for CRM, by choosing Transactions Settings for ERP Transactions Maintained via CRM Cross-System Copy Control for Opportunities and ERP Transactions
I want to see the screens or video regarding with this scenario.
Regards,
Memo

Need to load only few sales orders from ecc to bi 7?

Similar Messages

Maybe you are looking for