Need to log into Mobility Sevices Engine

Hi Everyone.
Sorry if anyone already addressed this issue before. I just can't find it.
The preious wireless technician left our company and didn't leave the password. Now we need to re-ip the WCS, WLC and MSE. The only problem left is with the MSE.
From the WCS, I can see the username for the MSE is admin, and the password shows asterisks.
Also from Security Index Detailed Report in the WCS, I can see the following description,
Device Security Issue: Mobility Service Engine Mobility Services Engine user has default password configured.
Security Solution: Configure strong password for the users on the Mobility Services Engine
I did a research and from this link (http://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch2_CAS.html), it's saying "
The default username and password are both admin. "
However when I tried to SSH to this MSE(model# 3310), MSE asked for username and password. I put admin/admin there and got an error mesage of "password authentication failed". I am thinking there is another default password for this MSE. Anybody can help? I don't want to go through the password recovery process. Another question is that if anybody can point me a link of how to change the IP address of the MSE.
Any input will be greatly appreciated.
Robert

Robert,
If you don't have the password, then you'll have to go through the recovery process.
http://www.cisco.com/en/US/docs/wireless/mse/3350/quick/guide/mse_qsgmain.html#wp1053115
To change the IP, you can go through the setup script once you can get in.
/opt/bin/setup.sh
IIRC
HTH,
Steve
Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

Similar Messages

How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

The me.com website is not designed for or intended to be accessed by iOS devices. Apple provides support in iOS or seperate Apps for accessing all aspects of MobileMe except for the Accounts section.
Use MobielMe as intended and you'll have no problems.
See: http://support.apple.com/kb/ts1673
Even if you use a different browser to get access to me.com on iOS, you'll find most of it is unusable.
Other websites that present you with the mobile version have been programmed to do so by their developers. They specifically look for users accessing from 'mobile' devices and switch to the mobile site. Many such sites provide a link to go back to the 'full' site, if not, there's not a lot you can do except use a browser that can pretend not to be a mobile browser.

HT201365 I reset my iPhone 4 and it says I need to log into my iCloud

I reset my iPhone 4 and it says I need to log into my iCloud, but I don't have an iCloud even though it gives me the first letter to an email, of which I don't have. I bought my phone from Verizon when it was new. What do I do?

It can't be tracked with Find My iPhone if it wasn't enabled, and even if it was it can be tracked if it's turned off. All you can do is physically look for it.
You might also want to read this: http://support.apple.com/kb/HT5668.

11g authentication directly against EBS (bypassing need to log into EBS)

Is it possible to configure EBS authentication that allows users to directly authenticate against the EBS database? I see some documentation/threads on this but it seems to be for setting up a link "within EBS" to use EBS credentials to log into OBIEE. Has anyone successfully configured security to directly autheticate against EBS DB (bypassing the need to log into EBS).
Any input is appreciated.

Hi,
See below my thread this might be of some help to you.
Logout link missing upon integrating OBIEE 11g with EBS (Not through SSO)
Thanks,
Sri

I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

I would love to give you more information but i cannot access that page again? i can add Lightroom to my cart but when i go into my cart it says there is nothing in there? I have a red bubble above "my cart" with a number 4 in it to show there is something there but there is not? It just wont let me buy anything?

Trying to download an app for my iPhone but tells me i need to log into the iTunes store which i already am. any suggestions?

I am trying to download an app for my iphone but the msg tells me i need to log into the itunes store on my computer which i am already in. any suggestions?

Are you trying to download directly from iPhone?
If true, go to Settings > Store > Apple ID > sign out then sign back in again.

Why am I getting a message that I need to log into the Canadian store for app updates and iTunes

Why am I getting a message that I need to log into the Canadian store for app updates and I tune purchases?

Should you be in the Canadian App Store? Is that your store? Of not - or of you need to see what store you are in.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store

Need to log into portal usign a different User-Agent(SPS15 issue)

Hi,
we are having an error trying to log portal. We have an application that logs into portal to get the MYSAPSO2 Cookie.
This applications have in the header the User-Agent "ExtApp".
Apparently due to changes in SPS15 the page builder becomes more restrictive on the range of browsers that can access portal.
We´d like to add our own User-Agent.
Any thoughts on how can this be done.
Regards
Fernando

For anyone interested, the problem was resolved by restarting the OC4J_Security component from the infrastructure tier.
This poses another question, for newly created users to take effect, does this restart always need to occur?

My ipad Won't let me download apps? Says I need to log into iTunes store but I am logged in??help please, My ipad Won't let me download apps? Says I need to log into iTunes store but I am logged in??help please

Says I need to go into iTunes and download from there but I'm already signed in....I'm so confused

Hello dowie3,
Just restart your ipad, with version of IOS are you running?
It's possible that your apple id is locked, or there are some prolems with your internet connection. On this site you can check you account en find a solution for your problem. http://store.apple.com/us/help/your_account
Jack Groot

I setup a Cisco Home Network and Need help Logging into It

Hello, I have four 2521 routers and three 2954 switches. I connected my ISPs modem from the ethernet port and plugged it into port 24 of one of my switches. I also configured the switch for VTY access and gave it a login password. I would like to log into the switch to configure it and telnet into all the other devices from a remote location. But I am unable to ping the public address assigned to me by my ISP. So I can't even telnet to the switch. Help

With help from elsewhere, I have learned how to change the colors and figured out a few other things. I have another question, though.
I want to put a Twitter widget and a comment box on my website. I have the widget code from Twitter, but it is HTML and javascript or something. Can I just put these codes into the modules of the flash template? If you look at the template, you should see that it has modules that have editable HTML text areas, but I don't know if it is limited to text or something, or if it will function correctly if I put other HTML codes in it such as script codes, etc in it.
Also, if that works, does anyone know where I can get a code to put the comment box in one of the modules? I don't mean a contact box, I mean a widget where people can leave comments and the comments display on the page, like on a myspace profile. Just something simple that allows a visitor to leave a name and a text-only comment. I would also like to be able to selectively delete comments in case of spammers, etc.
I found this, which might be what I am looking for, just a simple comment box, but this one is flash:
http://activeden.net/item/commenting-with-no-database/69183?sso?WT.ac=search_item&WT.seg_1 =search_item&WT.z_author=flashBrian
Message was edited by: ESJoeProductions

Help needed to log into an Open Directory account which has the same username as the local account

Hello,
I have successfully setup a Mac OS X Lion Server and it is an Open Directory Master. On the server Ihave created an account with the name 'Connor'. I have numerous Macs (allrunning OS X 10.7 Lion) connected to this server but on one of the Macs thereis a local account with the name 'Connor' too (the local and networked accountshave different passwords). I want to log into the Open Directory account onthat mac. So, I have done an authenticated bind to the server, but when I go tolog in the password box shakes. I think the computer thinks I am trying to loginto the local account and not the Open Directory account. On Windows, I canlog into either the local accounts or the networked accounts by typing\LOCAL-COMPUTER-NAME\Connor. So, I was wondering if there was a similar commandto do this on Mac.
I don't think I haveworded this very well, so if someone doesn't understand please ask me somequestion about the problem and I will try and explain it better.
Any help would be greatlyappreciated,
Connor

Maybe I didn't make myself clear. I have used directory utility to do an authenticated bind to my server. I also have no problem logging into other accounts in the Open Directory. But, I just can't log into the account which has the same name both in the Open Directory and locally.
Was there something I missed in Directory Utility? Could you please help me if this is so.
Thanks for replying so quickly

Need help logging into Adobe Content Viewer on my iPad

I have downloaded Adobe Content Viewer on my iPad and when I try to sign in I get an authentication failed message. I have changed my password and i have no problem logging into my account for Adobe on the website. Not sure what I am doing wrong.
PLease help.
K

Hi Bob,
thanks for hen the reply.
I did that and it gives me an unsupported browser message.
And the upgrade to a supported browser link goes no where
Thoughts?

Why do I need to log into my homepage each time I open up firefox.

Ever time I open up Firefox I must log into each of my homepages,AOL, Yahoo, and Comcast. This just started all of a sudden, when I use Internet Explore it works just fine. Please help I hate to use Internet Explore I have been using Firefox for years its been a great product Thanks for all of your hard work. Craig Pelletier.

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
to store new passwords.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

Iv been locked out of my ipad due to my friend trying my password to many times and it says that i need to log into itunes which i have done and it is still not letting me back into my ipad any suggestions?

Hi i have been lo cked out of my ipad due to my friends trying my password to many times and it is saying for me to log into itunes which i have done but it is still not letting me use my ipad

Forgotten Passcode or device disabled after entering wrong passcode
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device

Need to Log into two different screens on bootup?

Since resinstalling Mac OS X Mountain Lion on my 2012 13'' Macbook Air, I have to log in twice. While setting up it made me create a new password before it would wipe the disk and let me continue. So now I have to log in twice booting up my macbook air. I'm totally lost. The 1st screen is gray and has a circle with an outline of someones head with a question mark and says "update needed". As far as I can tell I have kept up on updates and kept updating until it said no updates available. After I get past that screen with the password, I have another screen with the selected picture of a macaw that I normally log in with. This has my "OLD" password. Would this all be because of FileVault?

Hi, have you found any resolution to this? I suddenly have found myself with the same problem. Thanks in advance!

Need to log into Mobility Sevices Engine

Similar Messages

Maybe you are looking for