Need to make Assignment field in Cash Journal mandatory
Hi friends
I have a requirement to make the assignment field as mandatory in the Cash Journal for a particular G/L. So accordingly, i changed the Field Status for that particular G/L as mandatory in the Field Status Group. But now when i am entering the transaction in FBCJ, it is not prompting me to enter the assignment field. Strangely, when i try the same thing with F-02 with the same G/L, it shows the Assignment field as mandatory.
I checked the field name of the assignment field and it was ZUONR. However, in FBCJ, the name shows as ALLOC_NMBR. Please tell me where i am going wrong.
Thxs in advance
Hi
On FBCJ screen, even though the field is set to mandatory in field status, "?" mark doesn't appear, but if the field is not filled, the system should issue an error message and the document doesn't get posted to FI. You can use screen variant to set the field mandatory on FBCJ screen.
See note 546365.
Regards, Kyoko
Similar Messages
-
How to Make Assignment field in Details Tab Mandatory in MIRO
Hi Experts,
I would like to know how to make the field "assignment" in Details tab of transaction MIRO as a Mandatory field, Give all the posible ways and their causes and effects.
Thanks In advance.Hi,
check the field statusgroup of the reconcilation account for your vendors and change thisfield status group for the field Assinment to Mandatory.
But make sure that then all your endors haven an sort key in the master data.
Regards, -
Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
AyeshaThanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha -
Purchase order field in Cash Journal
Hi,
We want to post expenses with reference to Purchase order in Cash Journal. Purchase order field is not available in the Cash Journal. How to update the purchase order field in Cash Journal.
Regards,
AzeemHi,
In Cash journal, there are fields which are standard from the program SAPMFCJ0 and Control FTCJ_E_POSTINGS.
So you can see in FBCJ, while you post transaction line at the extreme right, you can see "configuration" there you can see the available fields. If you want to include, contact ABAP consultant or SAP team.
Regards,
Ramesh. -
Tax Code field in Cash journal
Dear All,
Can Tax Code field be activated in Cash Journal . If yes how? Useful answers will be rewarded with points.
Regards
Milind NairHi
Goto FBCJ, it will have two segments, one is the header data and other is the line item data.
In the Line item segment where you enter the line item details, go to the right hand side corner of the Table. You will see a small icon with colours. This icon is present at the Top right hand corner of the line item entry table in FBCJ.
Click on this ICON, this is the administrator icon. Then click on administrator, then you can see list of field names, there will be a check box called invisible. For the fields TAx code and juristiction it will be marked as invisibel. remove this tick and activate and save the parameter.
Afterwards you will get the required fields in FBCJ.
If you have problem when you click on the icon, then it is a authorisation problem so contact your Basis resourse for necessary action then do the changes as required.
Cheers
V.Krishnan
(Assign Points if Useful) -
Additional Fields for Cash Journal Print Layout
Hi All
Is it possible to add a new field before printing the cash journal. My requirement is to add the FI Document Number Field to the screen layout before the printing the cash journal transactions. Please advise the procedure to this field.
Thank you
RaviHi jain,
in fbcj: cahs payment /cash reciepts that tabs is there right???
in right side last you can find out CONFIGURATION Button, click on that
Select administrator you can setup visible or invisible
assing points if useful....
regards
lakshmi
Edited by: lakshmi on Jun 17, 2008 1:43 PM -
Need to make some fields mandatory in standard transaction XK01
HI All,
Is it possiable to make some fields in standard transaction like XK01 mandatory?
or any work around ?
thank in advance for your replies.
Regads,
Riyaz.Hi,
From configuration(SPRO) u can easily make some fields mandatory in XK01. Otherwise create a transaction varition for XK01 using TC SHD0.
Rewards points if helpful.
Regards,
Srinivas Ch -
VT02N : Need to make a Field on Screen Required.
Hi All,
I have a situation where in i need to change the "Ship-to-party" field on the "Select Outbound Deliveries" screen to a required field.
This screen is the one that pops up when the Deliveries Button is clicked on the initial screen.
Is there any Exit or a Search Help that can be used for this.
Thanks in advance..!Program to find user EXIT : ref for future
report y_user_exits no standard page heading.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
How to make the fields of the table mandatory while creating new entries..?
Hi,
I have created a new Z table which has 6 fields. All the 6 fields are KEY fields and all are of CHAR type. I have generated the table maintenance generator for the same. My requirement is all the fields should be MANDATORY while creating the entries. No field should be BLANK.
When creating the new entries in the table, even if I don't give any values to some of the fields, it is saving the entry. But, it shouldn't happen like that. If any of the field is kept blank, it should not allow the user to save the entry. Can someone tell me how to approach this. Will there be any settings while creating the table which takes care of this.
I read somewhere that this can be done using the Table EVENTS. Can someone tell me what is the code that we should write there in the Events which prevents the user from saving the blank fields. While writing the logic in the events, how to check whether the particular field is BLANK or not. Will the values be stored in any internal table kind of thing..?
My table name is ZCRF_TAB and the fields are FLD!, FLD2, FLD3, FLD4, FLD5 & FLD6. Can someone provide me sample code for my requirement. Thanks in advance.
Best regards,
Paddu.Hi,I think u have generated Table Maintainance Generator, goto Environment->Modifications->Events
Select appropriate option by using F4,I think value 05 is appropriate for u r requirement.Enter From routine name.Dbl click on the routine.
Write the appropriate code like:
If ZTABLE-FIELD1 is initial.
Message (E000) with "Fill all the manadatory fields".
Thats it.Just look at the following docu with screenshots,by this understand how u can use Table Events:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Regards,
Rock. -
Assignment of GL Accounts to Cash Journals
Dear SAP Gurus,
I have a problem in Cash Journalas follows.
1. 3 Cash Journals opened for 3 branches in one company code and assigned one GL accounts for each location / branch and shown the opening balances.
2.When transactions posted and updated the cash Journals, the cash balances are updating in one GL a/c i.e Cash In Hand only for all 3 cash journals in one company code, instead of each GL A/c assigned to each cash journal.
3.My point is whether the GL Accounts assigned is correct or missed any link,as it is not updating the GL a/c when posting made in cash journal, if so how to rectify, pls give clear cut details or menu path for correct assignment of the GL accounts to each cash journal and post to the respective GL accounts.
suggest at the method at the earliest.
regards,
maalikHi,
Check your GL account for your cash journal in T Code FBCJC0. Here you have to assign different GL account for each of your cash journal.
Hope it helps
Saravanan.A -
Assignment field in tax line item
Hi
Withholding tax rates are maintanted in vendor master data. So while making entry vis fb60 it automatically posts to the TDS as per rate maintained. My problem is in line item for this kind of tax, which causes problem in document posting. Error log says that these tax line item need to be corrected.
When i give some input in "assignment" field then only it allows to post.
Could you tell me where this "assignment" field is maintained as mandatory for posting?
Thanks
SwetaHi Sweta,
Use OBC4 and change from mandatory to optional the assignment number in respect of field status group (I suppose G001) which has been mentioned in respect of that GL Account which is meant for TDS. This should solve your problem.
Aravind Boddupalli -
Cross company code transaction in cash journal
Hi,
Is it possible to do cross company code transactions in cash journal ?
Eg:
i want to make a payment ,from cash journal of cocd 1000 to cocd5000.
i should book the payment only thro cash journal .
Regards
GuruHi Guys,
No cross company code transactions can be made thru CJ. Reason being, CJ is created under a company code & generally related to a specific BA and handles petty cash. But u r not using BA.
So we cannot post corss company code transactions in CJ
Regards,
Ajay -
How to make some fields of a view non editable
Hi experts,
I need to make some fields like system user, system time and system date of a view non editable and after saving values for all other editable fields, the system should fill the values for the non editable fields as well.
Kindly help in this regard.I am assuming that you created a maintenance view for your table. Under view fields there is a column called 'Maintenance Attribute for view field' (one character field with 'P' in the column. Set that column value to 'H' for the fields that you want to hide.
You then have to go to SE54, give your maintenance view name, in the menu, 'Environment-->Events' create an event 01 with your own code to fill in those hidden fields. Look with key words 'Table Events' in this forum and you will get a lot of examples. -
How to make a field manadatory to a folder in a form?
Hi,
I'm working on a custom form.
I've 3 folders in that form, I need to make some fields to default values to a particular folder.
How do I do this?
Work around
========
Made the field to default, how ever these fields are showing default values for all the 3 folders.
I need to set the default values only to one particular folder.
Any suggestions on this would appreciate.
Thanks in advance.
--SanthoshWhat do you mean by folders?
Blocks?
Tabs?
Records?
It's not a forms term. -
How to update Assignment field in Accounting Document through BAPI ?
I need to change Assignment field in already posted accounting document through bapi or some other automatic method. Please tell me exactly which bapi I should use and how can I pass the changed assignment field?
Hey,
I couldnt find any BAPIs which update an accounting document. I think the safest way is to record FB02 and use BDC/Call Transaction.
-Kiran
*Please reward useful answers
Maybe you are looking for
-
MacBook Pro HD found corrupt, but will not repair or mount. Need to rescue data.
Hi, My wife has a MacBook Pro 15" mid-2012 (non-retina) with a 500 GB APPLE HDD. It runs Mavericks. It shuts down during boot (gets to around 30 % of the progress bar then dies). It will not launch in safe mode either. I created a bootable USB with Y
-
i just got the droid 2 and im all new to the phone and features i had a blackberry for two years and i was use to that but so far i like the droid i some what know how to do certain things. Now the only problem idk how to do is connect the droid to
-
A SSP ticket was received and can't be interpreted
Hi All, We are trying to .NET use Authentication features in EP Portal. Here: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/edb8a190-0201-0010-d398-c23e34f30295#_header1_2 it's said that you can use portal SSO to connect wi
-
Documents Sequence numbering for each Branch (Branch as segment)
dear Brother's can help me in this case Documents Sequence numbering for each Branch (Branch as segment) Each branch have an own sequence I implement oracle Business suite ERP for Five Branch ( KSA,INDIA,DUBIA ,JORDAN ,SYRIA ) I want to segregate seq
-
294B.TMP does anyone know what this file is?
It just show up on my dowload files and i don't know what it is.When i click it ask me if i want to run it.I press the 'No',because i'm not sure what kind of file it is.HELP ME PLEASE