Need to make import faster
Hi All,
Can anybody suggest how to make the import perform faster ? like adding parallel , exclude statistics .. we tried these 2 parameters but still its taking too much time..hence would like to know if any other options is available to make import faster
database oracle 10g 10.2.0.4
vishnusivathej wrote:
dont you think that once the archive log mode is disabled... you need to take a complete backup of the database again after you enable archiving which is by the way much resource intensive than making an import..It may be more resource intensive, but the rman time is compatible with people using the database. I've had experience where the extra time for archiving is much longer than the complete backup time - and besides, with some massive data load involving service interruption, you have to do the backup anyways (edit: and backup those arcs, which will be a lump of extra data like a pig moving through the snake). Think about why you run archivelog mode - it's to recover transactions. If it takes longer to recover an interrupted load and continue than to just do it over, that can be silly. If other transactions need to continue while loading, that's a different requirement. But then, maybe you can load into a different db and transport the tablespace.
Edited by: jgarry on Sep 24, 2010 11:46 AM
Similar Messages
-
How can I make importing faster? Have diff speeds on diff comps, help plz
I have 2 diff comps that both have Itunes 8, but for some reason they both import at completely different speeds even though the import settings are set exactly the same. And to make it more frustrating the older comp (7-8yrs old) is actually faster to use to import than my newer comp (not even 2yrs old). Newer comp only imports at an average of 3.1xs while the older one does double that @ 6.3xs, why is that and how do I change it to match or even make a lil fater than that?
Done.
(iMac OS X Lion)
I use an Ethernet Cable Modem. I dont use a router. For trouble shooting I havnt done much. Just changed the name of my sharing WiFi, tried to connect again and again, other passwords, other channels - nothing helped. (I had this problem ones, but I just changed a name, and it has worked)
When I'm clicking on my WiFi it shows me "The connection with "(null)" failed. The connection is timed" or something like this. I have a german language, so it would be: "Die Verbindung mit „(null)“ ist fehlgeschlagen. Bei der Verbindung ist eine Zeitüberschreitung aufgetreten.", if you speak it. -
How to make real fast animations using CS5
Hi,
I need to make some fast moving animations like moving an image from one corner to another corner, how can I do that?If you need guaranteed framerates and playback speed, move on to the world of video and compositing tools. There is no way to enforce rendering speed of animated GIFs and the format doesn't have a fixed framerate. Not to mention the absence of motion blur rendering and otehr things in PS itself. That aside, simply use less frames to make things move faster, it just won't look smooth in PS because of what I mentioned...
Mylenium -
I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people
There is no way to export Faces information.
I'm not sure why you would do this:
If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again,
If space is an issue then move the whole Library to an external drive:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD -
Need to Make the DATA Load Faster
Hi
I need to load the data from the source to the target like 90 tables. The source has 36 million rows in some of the tables it is taking a long time altough I have dropped the indexes on the target. I really need to make it as fast as possible. Following is the code for 1 table that I am currently using. Any Help would be really appreciated.
INSERT INTO AAA.CHECKHISTORYITEM@db1 (
OID,
AMOUNT,
BANK_DEPOSIT,
CHECKHISTORYOID,
CODE,
FIELD_NB,
HISTTYPEOID,
STATUTORY_DED,
TAXCODEOID,
VALIDTILL,
ABBREV,
CONVERSION_ID,
DESCRIPTION,
EXTERNAL_ID,
ACTIVE,
CREATEDON,
CREATOROID,
DELTAOID,
MODIFIEDON,
SCREEN_TRANSACTION_NUMBER,
SECURITYOID,
SHARABLE,
SUBCLASS,
TARGETUSEROID,
VERSION,
VERSION_NUMBER,
ACM,
MODIFIEDBYUSEROID,
cidn)
(select
OID,
AMOUNT,
BANK_DEPOSIT,
CHECKHISTORYOID,
CODE,
FIELD_NB,
HISTTYPEOID,
STATUTORY_DED,
TAXCODEOID,
VALIDTILL,
ABBREV,
CONVERSION_ID,
DESCRIPTION,
EXTERNAL_ID,
ACTIVE,
CREATEDON,
CREATOROID,
DELTAOID,
MODIFIEDON,
SCREEN_TRANSACTION_NUMBER,
SECURITYOID,
SHARABLE,
SUBCLASS,
TARGETUSEROID,
VERSION,
VERSION_NUMBER,
ACM,
MODIFIEDBYUSEROID,
'ABCD from ABCD.CHECKHISTORYITEM);
commit;Is there any trigger on the table you're inserting? You could consider disabling constraints (in case any exists) if you're sure enough of the data you're inserting and no one else "touches" the table while you're working on it.
-
I have a 2011 Mac mini I. Want to up the grade the SSD is it a good idea to change one or both of them would it make it faster if I changed both also what model or kind of SSD should I buy what is a good make and model
Here is a good place. I order one last week and it should arrive this Thursday.
Try:
http://eshop.macsales.com/shop/SSD/OWC/
Two is not any facter than one.
If you have one SSD and one rotating drive you can set them up as an integraded Fusion drive
AnandTech | Understanding Apple's Fusion Drive -
I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?
Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter -
i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.
First let me apologize for posting a reply that was only suitable for advanced users. Photoshop is broad and powerful therefore has a huge learning curve. In fact I would state no one knows and uses all of Photoshop. When we first get Photoshop it intimidate us and we're very uncomfortable using it. Many thing are not intuitive there in much learning involved. After some time we begin to know something and we are able to do some thing. Learning become rapid and we start playing in Photoshop. It is very important to play with Photoshop. Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn.
Photoshop Power lies in layers, selection and automation. However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears. Most at one time or another want to watermark or put a logo on their image. So its best to automate this process. All run into a problem in the process. "Size" We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation. Vector graphics works best when size vary greatly. If you can not work out how to create a vector solution like a custom shape. Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
I do not type or do English well so let me do some screen captures. I can not stress enough how important Black, White, Grays and Blending is when it come to image processing. Become friends with Multiply, Screen, Overlay and Luminosity blending.....
However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible. When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background. Many tools can be used to create the selection hee I use my action kill white.
Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop. Recently Adobe gave me and other a year subscription to the creative suite for our participation here. I still have not installed anything but Photoshop, A while back I found a program that can create vector patf for black and white art work. It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd -
When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.
You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps -
HP 15-d030nr: What Upgrades Do I Need To Make In Order To Be Able To Use Adobe After Effects CS6?
HP 15-d030nr, what upgrades do I need to make in order to be able to use adobe after effects cs6?
I installed Adobe After Effectss CS6 because I was told by HP Support that it would still work; it doesnt. It is very slow, and locks up bad. What upgrades do I need to do, or am I looking at having to go buy another labtop? Also, can I do these upgrades myself - at what cost?
**HP 15-d030nr**
Hardware
Product Name 15-d030nr
Product Number F5X99UA
Microprocessor 2.0GHz Intel Pentium N3510 Processor
Microprocessor Cache 2MB L2 Cache
Memory 4GB DDR3L SDRAM (1 DIMM)
Memory Slots 2 user accessible
Video Graphics Intel HD graphics
Display 15.6-inch diagonal HD BrightView LED-backlit touchscreen display (1366x768)
Hard Drive 500GB 5400RPM hard drive
Multimedia Drive SuperMulti DVD burner
Network Card 10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity 1x1 802.11b/g/n WLAN
Sound HD Audio with stereo speakers
Keyboard Full-size island-style keyboard with numeric keypad
Pointing Device Touchpad supporting multi-touch gestures without on/off button
External Ports Multi-format digital media card reader for Secure Digital cards 1
SuperSpeed USB 3.0
2 Universal Serial Bus (USB) 2.0
1 HDMI
1 VGA (15-pin)
1 RJ-45 (LAN)
1 Headphone-out/microphone-in combo jack Dimensions 1.11 in (H) x 14.88 in (W) x 10.20 in (D) Weight 4.96 lb Power 45W AC adapter
3-cell 31WHr 2.8Ah lithium-ion polymer battery ID Mech Description Front facing HP TrueVision HD Webcam with integrated digital microphone
**After Effects CC (2014) system requirements and language versions Windows**
Intel Core2 Duo or AMD Phenom II processor with 64-bit support
Microsoft Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
4 GB of RAM (8 GB recommended)
5 GB of available hard-disk space; additional free space required during installation (cannot install on removable flash storage devices)
Additional disk space for disk cache (10 GB recommended)
1280 x 1080 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certifi ed GPU card for GPU-accelerated ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
*I also have a 1TB external hardrive*
This question was solved.
View Solution.Your problem is that the program wants a good video card and a fast hard drive and lots of memory and you have none of the above. If you upgraded the RAM to 8 gigs and installed a solid state hard drive you might make the program useable but the real bottleneck is going to be the Intel HD graphics, which cannot be upgraded.
You do have an open slot to add one 4 gig memory module. This is an easy relatively inexpensive upgrade. See here:
https://www.youtube.com/watch?v=L7FvZ-JduRM
http://www.crucial.com/usa/en/ct51264bf160b
I would try this a step at a time. Next would be the solid state drive. That would cost maybe $150. Post back if you need more help.
If this is "the Answer" please click "Accept as Solution" to help others find it. -
I have a normal report , i need to make it into ALV,
Hi,
i have a normal report and i need to make it into ALV Report in ECC5.0version. when i making it into ALV its giving blank.
can any one help me out to make below code in to ALV report.
REPORT ZSAMPLE line-size 260
line-count 65
no standard page heading.
====================================================================
TABLES *********************************
====================================================================
tables : bseg,
bkpf,
kna1,
bsid,
bsad,
knb1.
data : begin of customer_tab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
flag(1) type c,
end of customer_tab.
data : begin of customerdoc_tab occurs 0,
kunnr like kna1-kunnr,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of customerdoc_tab.
data : begin of doc_tab occurs 0,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of doc_tab.
DATA: BEGIN OF BSID_TAB OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB.
ranges : r_bukrs for bsid-bukrs,
r_kunnr for kna1-kunnr.
===================================================================
VARIABLES *******************************
===================================================================
data : v_belnr like bseg-belnr,
v_gjahr like bkpf-gjahr,
v_monat like bkpf-monat,
v_ttlc type p,
v_flag(1) type c,
V_COUNT1(4) TYPE N,
V_COUNT2(4) TYPE N,
V_COUNT3(4) TYPE N,
V_COUNT4(4) TYPE N,
V_COUNT5(4) TYPE N,
V_COUNT6(4) TYPE N,
V_COUNT7(4) TYPE N,
V_COUNT8(4) TYPE N,
V_COUNT9(4) TYPE N,
V_COUNT10(4) TYPE N,
V_NET1 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 1
V_NET2 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 2
V_NET3 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 3
V_NET4 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 4
V_NET5 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 5
V_NET6 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 6
V_NET7 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 7
V_NET8 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 8
V_NET9 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 9
V_NET10 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 10
V_NET11 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 11
V_NET LIKE BSID-DMBTR, "Total Balance of Customer
V_ttlNET1 LIKE BSID-DMBTR,
V_ttlNET2 LIKE BSID-DMBTR,
V_ttlNET3 LIKE BSID-DMBTR,
V_ttlNET4 LIKE BSID-DMBTR,
V_ttlNET5 LIKE BSID-DMBTR,
V_ttlNET6 LIKE BSID-DMBTR,
V_ttlNET7 LIKE BSID-DMBTR,
V_ttlNET8 LIKE BSID-DMBTR,
V_ttlNET9 LIKE BSID-DMBTR,
V_ttlNET10 LIKE BSID-DMBTR,
V_ttlNET11 LIKE BSID-DMBTR,
V_ttlNET LIKE BSID-DMBTR,
v_kunnr like bseg-kunnr,
V_BUTXT like t001-butxt.
===================================================================
SELECTION SCREEN ****************************
===================================================================
selection-screen begin of block b1 with frame title text-001.
parameters : p_bukrs like bseg-bukrs obligatory.
select-options : s_kunnr for kna1-kunnr,
s_BRSCH for kna1-BRSCH,
s_REGIO for kna1-REGIO,
s_KTOKD for kna1-KTOKD,
s_BUSAB for knb1-BUSAB.
selection-screen: end of block b1.
selection-screen begin of block b2 with frame title text-003.
PARAMETERS: DAT LIKE SY-DATUM DEFAULT SY-DATUM.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-002.
SELECTION-SCREEN POSITION POS_LOW.
*PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
*PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '030'.
*PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '060'.
*PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '090'.
*PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '120'.
PARAMETERS: RASTBIS1(4) type n DEFAULT '0000'.
PARAMETERS: RASTBIS2(4) type n DEFAULT '0030'.
PARAMETERS: RASTBIS3(4) type n DEFAULT '0060'.
PARAMETERS: RASTBIS4(4) type n DEFAULT '0090'.
PARAMETERS: RASTBIS5(4) type n DEFAULT '0120'.
PARAMETERS: RASTBIS6(4) type n DEFAULT '0150'.
PARAMETERS: RASTBIS7(4) type n DEFAULT '0180'.
PARAMETERS: RASTBIS8(4) type n DEFAULT '0210'.
PARAMETERS: RASTBIS9(4) type n DEFAULT '0240'.
PARAMETERS: RASTBIS0(4) type n DEFAULT '0270'.
SELECTION-SCREEN END OF LINE.
Noted item removed as per FI instruction
PARAMETERS: P_STAND AS CHECKBOX default 'X',
P_NOTED AS CHECKBOX ,
P_SPCAL AS CHECKBOX .
selection-screen: end of block b2.
selection-screen begin of block b3 with frame.
PARAMETERS: allgline like RFPDO1-allgline .
Parameters : p_balyes type c radiobutton group grp9 default 'X',
p_balno type c radiobutton group grp9.
selection-screen: end of block b3.
Check for the Select option
AT SELECTION-SCREEN.
IF P_STAND = '' AND P_SPCAL = '' .
MESSAGE E398(00) WITH 'PLEASE CHOOSE AT LEAST ONE G/L INDICATOR!'.
ENDIF.
Check for Company code Authorization
authority-check object 'F_BKPF_BUK'
ID 'BUKRS' FIELD p_bukrs
ID 'ACTVT' FIELD '03'.
if sy-subrc ne 0.
message e398(00) with 'You are not Authorized for CC ' p_bukrs.
Endif.
===================================================================
START-OF-SELECTION ****************************
===================================================================
START-OF-SELECTION.
V_COUNT1 = RASTBIS1 + 1.
V_COUNT2 = RASTBIS2 + 1.
V_COUNT3 = RASTBIS3 + 1.
V_COUNT4 = RASTBIS4 + 1.
V_COUNT5 = RASTBIS5 + 1.
V_COUNT6 = RASTBIS6 + 1.
V_COUNT7 = RASTBIS7 + 1.
V_COUNT8 = RASTBIS8 + 1.
V_COUNT9 = RASTBIS9 + 1.
V_COUNT10 = RASTBIS0 + 1.
perform extract_data.
===================================================================
At line Selection *****************************
===================================================================
at line-selection.
if sy-lilli >= 9 .
refresh r_bukrs.
move p_bukrs to r_bukrs-low.
move 'I' to r_bukrs-sign.
move 'EQ' to r_bukrs-option.
append r_bukrs.
refresh r_kunnr.
move customer_tab-kunnr to r_kunnr-low.
move 'I' to r_kunnr-sign.
move 'EQ' to r_kunnr-option.
append r_kunnr.
submit ZFARVR0040 and return
with p_bukrs = p_bukrs
with dat = dat
with p_stand = p_stand
with p_spcal = P_SPCAL
with s_kunnr in r_kunnr.
endif.
===================================================================
Top of Page *******************************
===================================================================
TOP-OF-PAGE.
SELECT SINGLE BUTXT FROM T001 INTO V_BUTXT
WHERE BUKRS = p_BUKRS .
WRITE:/73'Customers Aging Analysis',140'PAGE NO.',
SY-PAGNO.
WRITE:/002 'COMPANY',
011 P_BUKRS,
017 V_BUTXT,
055 allgline centered,
140 'DATE :',
150 sy-datum .
write:/002 'User',
011 sy-UNAME,
140 'Time :',
150 sy-UZEIT.
SKIP.
format color col_heading intensified off.
WRITE:/ SY-ULINE,
SY-VLINE,002 'Customer',
012 SY-VLINE,013 'Name',
043 SY-VLINE,048 'CURRENT',
061 SY-VLINE,065 'FROM ',V_COUNT1,
079 SY-VLINE,083 'FROM ',V_COUNT2,
097 SY-VLINE,101 'FROM ',V_COUNT3,
115 SY-VLINE,119 'FROM ',V_COUNT4,
133 SY-VLINE,137 'FROM ',V_COUNT5,
151 SY-VLINE,155 'FROM ',V_COUNT6,
169 SY-VLINE,173 'FROM ',V_COUNT7,
187 SY-VLINE,191 'FROM ',V_COUNT8,
205 SY-VLINE,209 'FROM ',V_COUNT9,
223 SY-VLINE,228 'FROM ',V_COUNT10,
243 SY-VLINE,248 'TOTAL',
268 SY-VLINE.
WRITE:/ SY-VLINE,002 'Number',
12 SY-VLINE,
43 SY-VLINE,
061 SY-VLINE,065 'TO ',RASTBIS2,
079 SY-VLINE,083 'TO ',RASTBIS3,
097 SY-VLINE,101 'TO ',RASTBIS4,
115 SY-VLINE,119 'TO ',RASTBIS5,
133 SY-VLINE,137 'FROM ',RASTBIS6,
151 SY-VLINE,155 'FROM ',RASTBIS7,
169 SY-VLINE,173 'FROM ',RASTBIS8,
187 SY-VLINE,191 'FROM ',RASTBIS9,
205 SY-VLINE,209 'FROM ',RASTBIS0,
223 SY-VLINE,
243 SY-VLINE,
268 SY-VLINE,
SY-ULINE.
format color off.
===================================================================
END-OF-SELECTION ***************************
===================================================================
end-of-selection.
===================================================================
Form : Extract_Data *
===================================================================
form extract_data.
Select the Customers
Select t1~kunnr t2~name1
into corresponding fields of table customer_tab
from knb1 as t1 inner join kna1 as t2
on t2~kunnr = t1~kunnr
where t1~bukrs = p_bukrs
and t1~kunnr in s_kunnr
and t1~BUSAB in s_busab
and t2~regio in s_regio
and t2~BRSCH in s_BRSCH
and t2~KTOKD in s_KTOKD.
if sy-subrc <> 0.
message e398(00) with 'No Customers Selected'.
endif.
sort customer_tab.
describe table customer_tab lines v_ttlc.
v_ttlc = v_ttlc + 10.
loop at customer_tab.
v_net1 = 0.
v_net2 = 0.
v_net3 = 0.
v_net4 = 0.
v_net5 = 0.
v_net6 = 0.
v_net7 = 0.
v_net8 = 0.
v_net9 = 0.
v_net10 = 0.
v_net11 = 0.
v_net = 0.
perform calculate_ageing
using
p_bukrs
customer_tab-kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
' ' "noted item
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
if p_balyes = 'X' or v_net > 0.
format color col_total.
write:/ sy-vline,
002 customer_tab-kunnr,
012 SY-VLINE,013(30) customer_tab-name1,
043 SY-VLINE,044(16) v_net1,
061 SY-VLINE,062(16) v_net2,
079 SY-VLINE,080(16) v_net3,
097 SY-VLINE,098(16) v_net4,
115 SY-VLINE,116(16) v_net5,
133 SY-VLINE,134(16) v_net6,
151 SY-VLINE,152(16) v_net7,
169 SY-VLINE,170(16) v_net8,
187 SY-VLINE,188(16) v_net9,
205 SY-VLINE,206(16) v_net10,
223 SY-VLINE,224(16) v_net11,
239 SY-VLINE,240(16) v_net,
258 SY-VLINE.
format color off.
hide : customer_tab-kunnr.
v_ttlnet1 = v_ttlnet1 + v_net1.
v_ttlnet2 = v_ttlnet2 + v_net2.
v_ttlnet3 = v_ttlnet3 + v_net3.
v_ttlnet4 = v_ttlnet4 + v_net4.
v_ttlnet5 = v_ttlnet5 + v_net5.
v_ttlnet6 = v_ttlnet6 + v_net6.
v_ttlnet7 = v_ttlnet7 + v_net7.
v_ttlnet8 = v_ttlnet8 + v_net8.
v_ttlnet9 = v_ttlnet9 + v_net9.
v_ttlnet10 = v_ttlnet10 + v_net10.
v_ttlnet11 = v_ttlnet11 + v_net11.
v_ttlnet = v_ttlnet + v_net.
endif.
endloop.
ULINE.
format color col_total.
write:/ sy-vline,
012 SY-VLINE,012(30) ' T O T A L',
043 SY-VLINE,044(16) v_ttlnet1,
061 SY-VLINE,062(16) v_ttlnet2,
079 SY-VLINE,080(16) v_ttlnet3,
097 SY-VLINE,098(16) v_ttlnet4,
115 SY-VLINE,116(16) v_ttlnet5,
133 SY-VLINE,134(16) v_ttlnet6,
151 SY-VLINE,152(16) v_ttlnet7,
169 SY-VLINE,170(16) v_ttlnet8,
187 SY-VLINE,188(16) v_ttlnet9,
205 SY-VLINE,206(16) v_ttlnet10,
223 SY-VLINE,224(16) v_ttlnet11,
239 SY-VLINE,240(16) v_ttlnet,
258 SY-VLINE.
format color off.
ULINE.
endform.
Function to Calculate Aging.
Form calculate_ageing using
bukrs
kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
P_NOTED
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
DATA: BEGIN OF BSID_TAB1 OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB1.
RANGES: R_UMSKZ FOR BSID-UMSKZ.
Data : V_ZFBDT Like bsid-ZFBDT,
V_ZBD1T Like bsid-ZBD1T,
V_ZBD2T Like bsid-ZBD2T,
V_ZBD3T Like bsid-ZBD3T,
V_LINES(8) TYPE n.
IF P_NOTED = 'X'. "CHECK NOTED ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'D'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'L'.
APPEND R_UMSKZ.
ENDIF.
IF P_STAND = 'X'. "CHECK STANDARD ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = ' '.
APPEND R_UMSKZ.
ENDIF.
IF P_SPCAL = 'X'. "CHECK SPECIAL G/L TRANSACTION
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'A'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'B'.
APPEND R_UMSKZ.
ENDIF.
SELECT * FROM BSID INTO CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
SELECT * FROM BSAD appending CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
augdt >= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
DESCRIBE TABLE BSID_TAB LINES V_LINES.
LOOP AT BSID_TAB.
if bsid_tab-BLART = 'DZ'.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsid where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc = 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
else.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsad where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc <> 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
endif.
endif.
endif.
IF BSID_TAB-SHKZG = 'H'.
BSID_TAB-DMBTR = BSID_TAB-DMBTR * ( - 1 ).
ENDIF.
bsid_tab-netdt = bsid_tab-ZFBDT.
bsid_tab-netdt = bsid_tab-budat.
bsid_tab-koart = 'D'.
MODIFY BSID_TAB.
PERFORM CALC_DUE_DATE USING BSID_TAB.
BSID_TAB-DAYSD = DAT - BSID_TAB-NETDT.
IF BSID_TAB-DAYSD <= RASTBIS1.
V_NET1 = V_NET1 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS2.
V_NET2 = V_NET2 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS3.
V_NET3 = V_NET3 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS4.
V_NET4 = V_NET4 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET5 = V_NET5 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS6.
V_NET6 = V_NET6 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS7.
V_NET7 = V_NET7 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET8 = V_NET8 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS9.
V_NET9 = V_NET9 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS0.
V_NET10 = V_NET10 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD > RASTBIS0.
V_NET11 = V_NET11 + BSID_TAB-DMBTR.
ENDIF.
V_NET = V_NET + BSID_TAB-DMBTR.
MODIFY BSID_TAB.
ENDLOOP.
endform.
Calculate Due Date
FORM CALC_DUE_DATE USING P_BSID_TAB STRUCTURE BSID_TAB.
DATA : REFE TYPE P.
IF P_BSID_TAB-KOART = 'K' OR P_BSID_TAB-KOART = 'D'.
IF P_BSID_TAB-ZFBDT IS INITIAL.
P_BSID_TAB-ZFBDT = P_BSID_TAB-BLDAT.
ENDIF.
*Nettofälligkeit bestimmen--
IF NOT P_BSID_TAB-ZBD3T IS INITIAL.
REFE = P_BSID_TAB-ZBD3T.
ELSE.
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
REFE = P_BSID_TAB-ZBD2T.
ELSE.
REFE = P_BSID_TAB-ZBD1T.
ENDIF.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
REFE = 0.
ENDIF.
ENDIF.
P_BSID_TAB-NETDT = P_BSID_TAB-ZFBDT + REFE.
*Skontofälligkeiten bestimmen--
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD2T.
ELSE.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
ENDIF.
IF NOT P_BSID_TAB-ZBD1T IS INITIAL
OR NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK1DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD1T.
ELSE.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
ENDIF.
ELSE.
MESSAGE E122 RAISING ACCOUNT_TYPE_NOT_SUPPORTED.
ENDIF.
E_FAEDE = FAEDE.
ENDFORM.Hi,
As vijay said...
1.Declare One final Internal table which you want to show the data
2 . populate the fieldcatalog using the FM or Manually using the itab in step1
3. Collect the Data into final internal table which you created in Step 1.
4. pass the fieldcat and Internal table to ALV FM.
chk out the prg below i have created your program but i donn knw wht are the output fields... chk your prg
*REPORT ZALVTEST .
REPORT ZSAMPLE line-size 260
line-count 65
no standard page heading.
TYPE-POOLS: SLIS.
====================================================================
TABLES *********************************
====================================================================
tables : bseg,
bkpf,
kna1,
bsid,
bsad,
knb1.
data : begin of customer_tab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
flag(1) type c,
end of customer_tab.
data : begin of customerdoc_tab occurs 0,
kunnr like kna1-kunnr,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of customerdoc_tab.
data : begin of doc_tab occurs 0,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of doc_tab.
DATA: BEGIN OF BSID_TAB OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB.
ranges : r_bukrs for bsid-bukrs,
r_kunnr for kna1-kunnr.
===================================================================
VARIABLES *******************************
===================================================================
data : v_belnr like bseg-belnr,
v_gjahr like bkpf-gjahr,
v_monat like bkpf-monat,
v_ttlc type p,
v_flag(1) type c,
V_COUNT1(4) TYPE N,
V_COUNT2(4) TYPE N,
V_COUNT3(4) TYPE N,
V_COUNT4(4) TYPE N,
V_COUNT5(4) TYPE N,
V_COUNT6(4) TYPE N,
V_COUNT7(4) TYPE N,
V_COUNT8(4) TYPE N,
V_COUNT9(4) TYPE N,
V_COUNT10(4) TYPE N,
V_NET1 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 1
V_NET2 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 2
V_NET3 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 3
V_NET4 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 4
V_NET5 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 5
V_NET6 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 6
V_NET7 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 7
V_NET8 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 8
V_NET9 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 9
V_NET10 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 10
V_NET11 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 11
V_NET LIKE BSID-DMBTR, "Total Balance of Customer
V_ttlNET1 LIKE BSID-DMBTR,
V_ttlNET2 LIKE BSID-DMBTR,
V_ttlNET3 LIKE BSID-DMBTR,
V_ttlNET4 LIKE BSID-DMBTR,
V_ttlNET5 LIKE BSID-DMBTR,
V_ttlNET6 LIKE BSID-DMBTR,
V_ttlNET7 LIKE BSID-DMBTR,
V_ttlNET8 LIKE BSID-DMBTR,
V_ttlNET9 LIKE BSID-DMBTR,
V_ttlNET10 LIKE BSID-DMBTR,
V_ttlNET11 LIKE BSID-DMBTR,
V_ttlNET LIKE BSID-DMBTR,
v_kunnr like bseg-kunnr,
V_BUTXT like t001-butxt.
********Declare Data Areas for List Viewer ***********
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF FIELDCAT,
FIELD TYPE SLIS_FIELDNAME,
COL_POS TYPE I ,
PGM LIKE SY-REPID,
FIELD_VALUE(20),
TABLE_NAME(10).
===================================================================
SELECTION SCREEN ****************************
===================================================================
selection-screen begin of block b1 with frame title text-001.
parameters : p_bukrs like bseg-bukrs obligatory.
select-options : s_kunnr for kna1-kunnr,
s_BRSCH for kna1-BRSCH,
s_REGIO for kna1-REGIO,
s_KTOKD for kna1-KTOKD,
s_BUSAB for knb1-BUSAB.
selection-screen: end of block b1.
selection-screen begin of block b2 with frame title text-003.
PARAMETERS: DAT LIKE SY-DATUM DEFAULT SY-DATUM.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-002.
SELECTION-SCREEN POSITION POS_LOW.
*PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
*PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '030'.
*PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '060'.
*PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '090'.
*PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '120'.
PARAMETERS: RASTBIS1(4) type n DEFAULT '0000'.
PARAMETERS: RASTBIS2(4) type n DEFAULT '0030'.
PARAMETERS: RASTBIS3(4) type n DEFAULT '0060'.
PARAMETERS: RASTBIS4(4) type n DEFAULT '0090'.
PARAMETERS: RASTBIS5(4) type n DEFAULT '0120'.
PARAMETERS: RASTBIS6(4) type n DEFAULT '0150'.
PARAMETERS: RASTBIS7(4) type n DEFAULT '0180'.
PARAMETERS: RASTBIS8(4) type n DEFAULT '0210'.
PARAMETERS: RASTBIS9(4) type n DEFAULT '0240'.
PARAMETERS: RASTBIS0(4) type n DEFAULT '0270'.
SELECTION-SCREEN END OF LINE.
Noted item removed as per FI instruction
PARAMETERS: P_STAND AS CHECKBOX default 'X',
P_NOTED AS CHECKBOX ,
P_SPCAL AS CHECKBOX .
selection-screen: end of block b2.
selection-screen begin of block b3 with frame.
PARAMETERS: allgline like RFPDO1-allgline .
Parameters : p_balyes type c radiobutton group grp9 default 'X',
p_balno type c radiobutton group grp9.
selection-screen: end of block b3.
Check for the Select option
AT SELECTION-SCREEN.
IF P_STAND = '' AND P_SPCAL = '' .
MESSAGE E398(00) WITH 'PLEASE CHOOSE AT LEAST ONE G/L INDICATOR!'.
ENDIF.
Check for Company code Authorization
authority-check object 'F_BKPF_BUK'
ID 'BUKRS' FIELD p_bukrs
ID 'ACTVT' FIELD '03'.
if sy-subrc ne 0.
message e398(00) with 'You are not Authorized for CC ' p_bukrs.
Endif.
===================================================================
START-OF-SELECTION ****************************
===================================================================
START-OF-SELECTION.
V_COUNT1 = RASTBIS1 + 1.
V_COUNT2 = RASTBIS2 + 1.
V_COUNT3 = RASTBIS3 + 1.
V_COUNT4 = RASTBIS4 + 1.
V_COUNT5 = RASTBIS5 + 1.
V_COUNT6 = RASTBIS6 + 1.
V_COUNT7 = RASTBIS7 + 1.
V_COUNT8 = RASTBIS8 + 1.
V_COUNT9 = RASTBIS9 + 1.
V_COUNT10 = RASTBIS0 + 1.
perform extract_data.
Build Field Catalogs **************************
PERFORM BUILD_FIELDCAT.
*******Start List Viewer *******************************
PERFORM START_LIST_VIEWER.
===================================================================
At line Selection *****************************
===================================================================
at line-selection.
if sy-lilli >= 9 .
refresh r_bukrs.
move p_bukrs to r_bukrs-low.
move 'I' to r_bukrs-sign.
move 'EQ' to r_bukrs-option.
append r_bukrs.
refresh r_kunnr.
move customer_tab-kunnr to r_kunnr-low.
move 'I' to r_kunnr-sign.
move 'EQ' to r_kunnr-option.
append r_kunnr.
submit ZFARVR0040 and return
with p_bukrs = p_bukrs
with dat = dat
with p_stand = p_stand
with p_spcal = P_SPCAL
with s_kunnr in r_kunnr.
endif.
===================================================================
Top of Page *******************************
===================================================================
TOP-OF-PAGE.
SELECT SINGLE BUTXT FROM T001 INTO V_BUTXT
WHERE BUKRS = p_BUKRS .
WRITE:/73'Customers Aging Analysis',140'PAGE NO.',
SY-PAGNO.
WRITE:/002 'COMPANY',
011 P_BUKRS,
017 V_BUTXT,
055 allgline centered,
140 'DATE :',
150 sy-datum .
write:/002 'User',
011 sy-UNAME,
140 'Time :',
150 sy-UZEIT.
SKIP.
format color col_heading intensified off.
WRITE:/ SY-ULINE,
SY-VLINE,002 'Customer',
012 SY-VLINE,013 'Name',
043 SY-VLINE,048 'CURRENT',
061 SY-VLINE,065 'FROM ',V_COUNT1,
079 SY-VLINE,083 'FROM ',V_COUNT2,
097 SY-VLINE,101 'FROM ',V_COUNT3,
115 SY-VLINE,119 'FROM ',V_COUNT4,
133 SY-VLINE,137 'FROM ',V_COUNT5,
151 SY-VLINE,155 'FROM ',V_COUNT6,
169 SY-VLINE,173 'FROM ',V_COUNT7,
187 SY-VLINE,191 'FROM ',V_COUNT8,
205 SY-VLINE,209 'FROM ',V_COUNT9,
223 SY-VLINE,228 'FROM ',V_COUNT10,
243 SY-VLINE,248 'TOTAL',
268 SY-VLINE.
WRITE:/ SY-VLINE,002 'Number',
12 SY-VLINE,
43 SY-VLINE,
061 SY-VLINE,065 'TO ',RASTBIS2,
079 SY-VLINE,083 'TO ',RASTBIS3,
097 SY-VLINE,101 'TO ',RASTBIS4,
115 SY-VLINE,119 'TO ',RASTBIS5,
133 SY-VLINE,137 'FROM ',RASTBIS6,
151 SY-VLINE,155 'FROM ',RASTBIS7,
169 SY-VLINE,173 'FROM ',RASTBIS8,
187 SY-VLINE,191 'FROM ',RASTBIS9,
205 SY-VLINE,209 'FROM ',RASTBIS0,
223 SY-VLINE,
243 SY-VLINE,
268 SY-VLINE,
SY-ULINE.
format color off.
===================================================================
END-OF-SELECTION ***************************
===================================================================
end-of-selection.
===================================================================
Form : Extract_Data *
===================================================================
form extract_data.
Select the Customers
Select t1~kunnr t2~name1
into corresponding fields of table customer_tab
from knb1 as t1 inner join kna1 as t2
on t2~kunnr = t1~kunnr
where t1~bukrs = p_bukrs
and t1~kunnr in s_kunnr
and t1~BUSAB in s_busab
and t2~regio in s_regio
and t2~BRSCH in s_BRSCH
and t2~KTOKD in s_KTOKD.
if sy-subrc <> 0.
message e398(00) with 'No Customers Selected'.
endif.
sort customer_tab.
describe table customer_tab lines v_ttlc.
v_ttlc = v_ttlc + 10.
loop at customer_tab.
v_net1 = 0.
v_net2 = 0.
v_net3 = 0.
v_net4 = 0.
v_net5 = 0.
v_net6 = 0.
v_net7 = 0.
v_net8 = 0.
v_net9 = 0.
v_net10 = 0.
v_net11 = 0.
v_net = 0.
perform calculate_ageing
using
p_bukrs
customer_tab-kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
' ' "noted item
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
if p_balyes = 'X' or v_net > 0.
format color col_total.
write:/ sy-vline,
002 customer_tab-kunnr,
012 SY-VLINE,013(30) customer_tab-name1,
043 SY-VLINE,044(16) v_net1,
061 SY-VLINE,062(16) v_net2,
079 SY-VLINE,080(16) v_net3,
097 SY-VLINE,098(16) v_net4,
115 SY-VLINE,116(16) v_net5,
133 SY-VLINE,134(16) v_net6,
151 SY-VLINE,152(16) v_net7,
169 SY-VLINE,170(16) v_net8,
187 SY-VLINE,188(16) v_net9,
205 SY-VLINE,206(16) v_net10,
223 SY-VLINE,224(16) v_net11,
239 SY-VLINE,240(16) v_net,
258 SY-VLINE.
format color off.
hide : customer_tab-kunnr.
v_ttlnet1 = v_ttlnet1 + v_net1.
v_ttlnet2 = v_ttlnet2 + v_net2.
v_ttlnet3 = v_ttlnet3 + v_net3.
v_ttlnet4 = v_ttlnet4 + v_net4.
v_ttlnet5 = v_ttlnet5 + v_net5.
v_ttlnet6 = v_ttlnet6 + v_net6.
v_ttlnet7 = v_ttlnet7 + v_net7.
v_ttlnet8 = v_ttlnet8 + v_net8.
v_ttlnet9 = v_ttlnet9 + v_net9.
v_ttlnet10 = v_ttlnet10 + v_net10.
v_ttlnet11 = v_ttlnet11 + v_net11.
v_ttlnet = v_ttlnet + v_net.
endif.
endloop.
ULINE.
format color col_total.
write:/ sy-vline,
012 SY-VLINE,012(30) ' T O T A L',
043 SY-VLINE,044(16) v_ttlnet1,
061 SY-VLINE,062(16) v_ttlnet2,
079 SY-VLINE,080(16) v_ttlnet3,
097 SY-VLINE,098(16) v_ttlnet4,
115 SY-VLINE,116(16) v_ttlnet5,
133 SY-VLINE,134(16) v_ttlnet6,
151 SY-VLINE,152(16) v_ttlnet7,
169 SY-VLINE,170(16) v_ttlnet8,
187 SY-VLINE,188(16) v_ttlnet9,
205 SY-VLINE,206(16) v_ttlnet10,
223 SY-VLINE,224(16) v_ttlnet11,
239 SY-VLINE,240(16) v_ttlnet,
258 SY-VLINE.
format color off.
ULINE.
endform.
Function to Calculate Aging.
Form calculate_ageing using
bukrs
kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
P_NOTED
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
DATA: BEGIN OF BSID_TAB1 OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB1.
RANGES: R_UMSKZ FOR BSID-UMSKZ.
Data : V_ZFBDT Like bsid-ZFBDT,
V_ZBD1T Like bsid-ZBD1T,
V_ZBD2T Like bsid-ZBD2T,
V_ZBD3T Like bsid-ZBD3T,
V_LINES(8) TYPE n.
IF P_NOTED = 'X'. "CHECK NOTED ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'D'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'L'.
APPEND R_UMSKZ.
ENDIF.
IF P_STAND = 'X'. "CHECK STANDARD ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = ' '.
APPEND R_UMSKZ.
ENDIF.
IF P_SPCAL = 'X'. "CHECK SPECIAL G/L TRANSACTION
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'A'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'B'.
APPEND R_UMSKZ.
ENDIF.
SELECT * FROM BSID INTO CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
SELECT * FROM BSAD appending CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
augdt >= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
DESCRIBE TABLE BSID_TAB LINES V_LINES.
LOOP AT BSID_TAB.
if bsid_tab-BLART = 'DZ'.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsid where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc = 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
else.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsad where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc <> 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
endif.
endif.
endif.
IF BSID_TAB-SHKZG = 'H'.
BSID_TAB-DMBTR = BSID_TAB-DMBTR * ( - 1 ).
ENDIF.
bsid_tab-netdt = bsid_tab-ZFBDT.
bsid_tab-netdt = bsid_tab-budat.
bsid_tab-koart = 'D'.
MODIFY BSID_TAB.
PERFORM CALC_DUE_DATE USING BSID_TAB.
BSID_TAB-DAYSD = DAT - BSID_TAB-NETDT.
IF BSID_TAB-DAYSD <= RASTBIS1.
V_NET1 = V_NET1 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS2.
V_NET2 = V_NET2 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS3.
V_NET3 = V_NET3 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS4.
V_NET4 = V_NET4 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET5 = V_NET5 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS6.
V_NET6 = V_NET6 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS7.
V_NET7 = V_NET7 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET8 = V_NET8 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS9.
V_NET9 = V_NET9 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS0.
V_NET10 = V_NET10 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD > RASTBIS0.
V_NET11 = V_NET11 + BSID_TAB-DMBTR.
ENDIF.
V_NET = V_NET + BSID_TAB-DMBTR.
MODIFY BSID_TAB.
ENDLOOP.
endform.
Calculate Due Date
FORM CALC_DUE_DATE USING P_BSID_TAB STRUCTURE BSID_TAB.
DATA : REFE TYPE P.
IF P_BSID_TAB-KOART = 'K' OR P_BSID_TAB-KOART = 'D'.
IF P_BSID_TAB-ZFBDT IS INITIAL.
P_BSID_TAB-ZFBDT = P_BSID_TAB-BLDAT.
ENDIF.
*Nettofälligkeit bestimmen--
IF NOT P_BSID_TAB-ZBD3T IS INITIAL.
REFE = P_BSID_TAB-ZBD3T.
ELSE.
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
REFE = P_BSID_TAB-ZBD2T.
ELSE.
REFE = P_BSID_TAB-ZBD1T.
ENDIF.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
REFE = 0.
ENDIF.
ENDIF.
P_BSID_TAB-NETDT = P_BSID_TAB-ZFBDT + REFE.
*Skontofälligkeiten bestimmen--
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD2T.
ELSE.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
ENDIF.
IF NOT P_BSID_TAB-ZBD1T IS INITIAL
OR NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK1DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD1T.
ELSE.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
ENDIF.
ELSE.
MESSAGE E122 RAISING ACCOUNT_TYPE_NOT_SUPPORTED.
ENDIF.
E_FAEDE = FAEDE.
ENDFORM.
*& Form BUILD_FIELDCAT
FORM BUILD_FIELDCAT .
PGM = SY-REPID.
FIELD = 'give field name'.
TABLE_NAME = 'give table name'.
PERFORM FIELDCAT_FILL USING FIELD.
and so on for the no. of fields you want to display
ENDFORM. " BUILD_FIELDCAT
*& Form START_LIST_VIEWER
FORM START_LIST_VIEWER.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = PGM
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = FINAL TAB(OUTPUT STATEMENTS TABLE)
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " START_LIST_VIEWER
*& Form FIELDCAT_FILL
text
FORM FIELDCAT_FILL USING FIELD_VALUE.
ADD 1 TO COL_POS.
FIELDCAT_LN-REF_TABNAME = TABLE_NAME.
FIELDCAT_LN-FIELDNAME = FIELD_VALUE.
FIELDCAT_LN-KEY = SPACE.
FIELDCAT_LN-DO_SUM = SPACE.
FIELDCAT_LN-COL_POS = COL_POS.
FIELDCAT_LN-NO_OUT = SPACE.
FIELDCAT_LN-QFIELDNAME = SPACE.
FIELDCAT_LN-HOTSPOT = SPACE.
APPEND FIELDCAT_LN TO FIELDCAT.
ENDFORM. " FIELDCAT_FILL
Reward points if you find this helpful
Regards,
Harini -
Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not upgrade). When I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Snow Leopard Loads? thanks!
Hi Donald,
No it doesn't erase anything by default, it does what we used to call an Archive and Install feature, which can give you a new OS, yet preserve your files and settings if you have enough room on your HD...
http://docs.info.apple.com/article.html?artnum=107120
But it does it automatically unless you specifically erase the Disk, but will replace Tiger completely for the OS & several Apple Apps like Safari, Mail, etc, yet preserve your old settings for those!
If you think you may need Tiger to run any APPs that do not work in SL/10.6, then clone or backup first.
I would recomend 2 things before installing though...
Make sure you have enough RAM & HD space.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
"Try Disk Utility
1. Insert the new Mac OS X SL/10.6 Install Disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214 -
Just bought a 2013 Macbook Pro w/ Retina, SSD hard drive, NVidia card....created a partition and installed Windows 8 with Bootcamp 5 to run my Steam games. My friend was telling me there are minor changes you need to make to the BIOS, don't defragment (or you'll ruin your SSD), and little things like that you have to watch out for. Can anyone tell me if there are minor changes I need to make on my computer to either help it run better, prevent damage, etc.--if so how? Please post links if you have them. Thanks!
You can sometimes find larger capacity Retina 'daughter card' flash storage devices on eBay - but, like the OWC solution, they don't come cheap. So, as you've deduced, your best (yet not overly inexpensive, either) bet is a fast external drive. The fastest external drives would have Thunderbolt connections - I've two of LaCie's 2big Thunderbolt drives (one 4TB and one 8TB) and they're nice and fast, but not cheap.
If I were you, I would head over to MacMall and search for Thunderbolt drives: they come with a variety of option in a variety of storage space.
That's going to be your fastest solution, even if not highly portable.
Good luck,
Clinton -
Mini to Slow - Can I make it Faster?
I'm new to this board and to Toshiba products. I have a mini laptop NB 205 with windows 7 starter... does anyone know why its so slow loading and, what I can do to make it faster? I'm not the best with computers and still learning about them.
Thanks
BoniStreaming without buffering is dependent on your internet connection, not the amount of ram (or video ram) you have. The only thing you can change on your computer itself to help with streaming is to see if there is a lower resolution streaming option (like 480P or 360P instead of 1080P or 720P or SD instead of HD). Otherwise you'll need to get a faster internet connection.
To adjust the video ram you have to go into the bios. Not sure exactly where it is on your system, but there aren't that many options that you can change in the bios on those things so it should be easy to find.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time. -
Flex pitch (Time) needs midi track import function
Flex pitch (Time) needs midi track import function
HI it's me again ( under my studio name).. I don't use Garage Band. I use Logic x. so don't know why you'd suggest doing away with another program when I have no use for Garage Band.
I think it ended up working only because it was a glitch.... when I exited the program and came back to it, it started working. The only thing that didn't appear was the pitch correction on the left hand side of the sound editor.. the slider button where you can go up to 100%...
but at least it worked. This Apple operating system always has bugs .. but gllitching on my projects doesn't make me a happy camper.
They don't even offer support for it. unless you pay through the roof.
Anyway.. it showed up... not sure how it did, but rebooted my computer and miraculously it was there.
Maybe you are looking for
-
MacBookAir OSX 10.5.8 Mail: on opening generates error msg "There is a problem saving information about your mailboxes. It may take a while to determine the problme. If you know this is a temporary problem, click Quit and then open Mail again". Optio
-
BIZTALK bts action mapping problem with Message Schemas for the Composite Operation
Hi, I have a message schema made with the composite operation. now, I have re-deployed my biztalk project and in the send port for this Oracle composite message the SOAP action header hasn't updated the correct action. now I tried several verations f
-
Can I buy an unlock iphone 5 in US now? If I can, how many business days can I get it?
Can I buy an unlock iphone 5 in US now? If I can, how many business days can I get it? Thank you!
-
Where can i find directions for the smc reset? Thanks in advance.
-
Hi BI Guru`s, I am executing report in BEx query designer but it could not connect to web browser.getting message like " The Pagae Cannt be Displayed" , I am using BI7.0 version, can any one tell me what kind of settings needs to be done in BI system