Need to make Partner maintanance mandatory in installed base.

Dear CRM Folks,
My requirement is..I need to make partner data mandatory at installed base if not maintained system should give error.
Currently we can save installed base without Partner data maintained. I have checked all the BADI's given in IMG but dont know how to use them. Kindly help me to achieve this functionality.
Regards
Raju Landge.
IBM India.

Hi,
please check in SPRO the used partner schema.
Here set for your partner functions the "mandatory" flag.
Kind regards
Manfred

Similar Messages

BP mandatory in Installed base?

Dear all,
We are assigning BP to the installed base from this path
Select installed base --> Go to --> partner
Now i want to make mandatory to assignig BP and address to Installed base.
How can i do?
Regards
Jayesh

Hi Jayesh,
To make Partner Mandatory you can go to following customizing and assign you partner determination procedure. In partner determination procedure you can specify what are the manadatory partner required. This would also take care of addresses.
Customer Relationship Management>Master Data>Installed Base>Installed Base Category>Assign Partner Determination Procedure to Installed Base Category
Best Regards,
Pratik Patel
Reward with Points!

Any extra settings I need to make for Sql Server 2012 Install for the purpose of SP 2013

Hi,
I am going to install sql serevr 2012 Ent on a stand alone server Win 2012 box[ say Server2] and I want to make this machine as a db box and will make other box[say Server1] SharePoint box.
[ On Server1 where there is no sql server installed ].
Do I need to make any extra settings /any mappings/config entries in this box before I install sql on this Server2 box.
I mean, in terms of creation of a separate sql instance is required etc ....
In my prev.installations as a standalone SP install with sql installed on the same box.
I am facing issue with development with SP 2013. Because though I am having 16GB RAM in one of my dev machines, with the s/ws like VS 2012, SP D 2013 along with SP 2013 & SQL SEREVR 2012, the debugging is almost NOT
happening[ its taking "minutes" to hit a breakpoint] at all.
help is appreciated!
Das

HI Shankar,Just to be sure with the following settings to configure sharepoint.
Ensure both boxes in same domain and network
ensure the connection \telnet is working.
to instal sharepoint,farm account should have below rights on sql DB.
db creator,securityadmin
Check the below link for instaltion of sharepoint 2013.
http://expertsharepoint.blogspot.de/2013/11/detailed-sharepoint2013-installation-i.html
Anil Avula[Microsoft Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Need to make "opening date" mandatory in SRM RFx Header Screen

Dear All,
Working for SRM component "/SAPSRM/WDC_DODC_RFQ_H_BD" there is field "OPEN_DATE_TIME" which i need to make it mandatory .
There is standard config to do the same but its not happening through that is there any way I could do the same.
I have also tried to enhanced the application and made it mandatory in MODIFYVEW method and given the error message also but it allowed the RFx to get publised even tough the date is not entered.
Really appreciate the same if anyone has come across such requirement.
Thanks
Ankit Jain

In my system works fine, I've added the following code in badi BBP_DOC_CHECK_BADI and I can't publish my RFX without filling that field...
DATA: ls_bid_header TYPE bbp_pds_bid_header_d,
        ls_messages TYPE LINE OF bbp_tmessages_badi.
IF flt_val EQ 'BUS2200'.
    CALL FUNCTION 'BBP_PD_BID_GETDETAIL'
      EXPORTING
        i_guid   = iv_doc_guid
      IMPORTING
        e_header = ls_bid_header.
    IF ls_bid_header-open_time IS INITIAL.
      CLEAR ls_messages.
      ls_messages-msgty = 'E'.
      ls_messages-msgid = 'ZYOUR_MESSAGE_CLASS'.
      ls_messages-msgno = 000.
      APPEND ls_messages TO et_messages.
    ENDIF.
ENDIF.

Need to make some fields mandatory in standard transaction XK01

HI All,
Is it possiable to make some fields in standard transaction like XK01 mandatory?
or any work around ?
thank in advance for your replies.
Regads,
Riyaz.

Hi,
From configuration(SPRO) u can easily make some fields mandatory in XK01. Otherwise create a transaction varition for XK01 using TC SHD0.
Rewards points if helpful.
Regards,
Srinivas Ch

Why Was it needed to make ArchLInux so hardcore to install?!?

I know that You all get me alredy wrong, but let me few moments to explain my self!
I am not a expert in LInux administration nor a begginer user of Linux and I feel dumb whit all other Linux distros.
The ONLY one Linux OS gived me freedom to work and enjoy it is ArchLinux, but not with new installer
wich need me to do EVERYTHING by myself just to pruff to noobs that win is only workable os there(*buntu's are not!)?
For three days i'm trying to mount the root and swap partition and I just don't get it!?
What was the Logic to make it that way? ArchLinux was not bare bone enogh and keep midiocre users away?
Please rewrite the "Installation guide"!
I'm not the only one with complains!
Thank You verymuch for the few moments You spend reading this!

This has been covered extensively here already: a search would have told you that.
Having to do "EVERYTHING" yourself is seen by the majority of the Arch community to be part of the Arch Way,
not an excuse for whining.
Closing.

Party-Relationships in Installed Base

Hi,
Can anybody highlight on purpose/uses/advantages of setting party relationships in Installed base.
What can be acheived by creating these relationships?
Regards,
Mohammed

hi,
You need to assign partner determination procedure to install base. First define partner determination procedure. Then assign it to your install base category. You can do the same in spro crm> master data> install base.
Now, after assigning pdp to install base category, when you will create install base and click on goto partner, you will get partner whose partner function you have used in partner determination procedure.
Best regards
Pankaj Kumar

Making "Partner" field mandatory during IW32

Hi,
Can u pls suggest me as to how to make the "Partner" field mandatory during the change of Maintenance order (ie IW32) for a particular order type. I tried Field selection for Order Header Data(PM) but the Field name "partner" is not appearing there. Kindly suggest me the way out.

hi arun
as far as i know it is not possible to make partner field mandatory after release.as i said you can make it mandatory during creation itself.
iam not sure but another option you just try it out.create a status profile of 2 status assign one status as intial and hide the partner function and another status make partner function has mandatory.presently i am not in SAP so just try it out.
regards
thyagarajan

IB52: FM for adding partner to the Install Base

Hi,
My requirement is to add Service Contact (partner) on the Installed Base - IB52
How to add a Partner on to the Installed Base - which Function Module to use?
Thanks
Rajeev

Using following FMs:
ls_comp_det-OBJECT_GUID = ls_comm_product-product_guid.
CALL FUNCTION 'CRM_IBASE_COMP_FIND'
CRM_IBASE_COMP_CHANGE
BAPI_IBASE_SAVE
BAPI_TRANSACTION_COMMIT

Populating the configurator from install base!!

HI All
We have a requirement of
Referencing the current product configuration from the Install Base and then populating it in Oracle Configurature , If any feature code is not populated due to any reason ,then we need to show those reason in the report .
Do we have any stabdard API or concurrent program to this ??
Or any program which does some part of the above requirement !??
Pls help
thanks
naveen

hi,
To get one service customer created one order in CRM system (say A) and this order is came down to our system(say B) and we send it further to another system(say c). we got ok response from system whome we send the order i.e. (C), so in our system (B)we close the order.
But unfortunately this order is failed in System C so we need to cancell this order. We cancelled the Order in system A but in our system(B) order is close so it is not possible to cancelled this order so we need to remove this item instance form install base.

Need to Make end customer field mandatory in sales order form.

I need to make end customer field mandatory when sales channel entered as some value...
for this i have used when validate record on order form
when i enter a value in sales channel as desired value the form is getting saved automatically and the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
let me know the sequence how it works if any one knows.

Sanni,
>
when i enter a value in sales channel as desired value the form is getting saved automatically and (then) the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
>
Which trigger are you using to do the "getting saved automatically'?
Does this trigger fire before the trigger that is making the field mandatory?
Regards,
PS: Is this an Oracle EBS query? If yes, this is the wrong forum
Edited by: Prabodh on Jun 14, 2012 4:48 PM

I need to reinstall my original factory disc and reset my computer to the beginning. It currently has lion. Do I need to erase my HD first to clear and make new room for the install disc.

I need to reinstall my original factory disc and reset my computer to the beginning. It currently has lion. Do I need to erase my HD first to clear and make new room for the install disc.

Prepare Your Mac for Sale
Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.

Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not an upgrade); when I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Sno Lprd loads? thx!

Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not upgrade). When I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Snow Leopard Loads? thanks!

Hi Donald,
No it doesn't erase anything by default, it does what we used to call an Archive and Install feature, which can give you a new OS, yet preserve your files and settings if you have enough room on your HD...
http://docs.info.apple.com/article.html?artnum=107120
But it does it automatically unless you specifically erase the Disk, but will replace Tiger completely for the OS & several Apple Apps like Safari, Mail, etc, yet preserve your old settings for those!
If you think you may need Tiger to run any APPs that do not work in SL/10.6, then clone or backup first.
I would recomend 2 things before installing though...
Make sure you have enough RAM & HD space.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
"Try Disk Utility
1. Insert the new Mac OS X SL/10.6 Install Disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214

For file to IDOC scenario, do i need to make a partner profile in XI ?

for a file--->XI--->IDOC scenario, do i need to make a partner profile in XI(for the R/3 system which is going to receive the IDOC),
or only a port maintenance in idx1 will do.....

hi Sudheer,
yes u need to maintain partner profile in R/3
Check below link in WIKi for complete File to IDOC
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&
Sachin

Are there any little known tweaks I need to make on my Macbook Pro w/ Retina display after installing Windows?

Just bought a 2013 Macbook Pro w/ Retina, SSD hard drive, NVidia card....created a partition and installed Windows 8 with Bootcamp 5 to run my Steam games. My friend was telling me there are minor changes you need to make to the BIOS, don't defragment (or you'll ruin your SSD), and little things like that you have to watch out for. Can anyone tell me if there are minor changes I need to make on my computer to either help it run better, prevent damage, etc.--if so how? Please post links if you have them. Thanks!

You can sometimes find larger capacity Retina 'daughter card' flash storage devices on eBay - but, like the OWC solution, they don't come cheap. So, as you've deduced, your best (yet not overly inexpensive, either) bet is a fast external drive. The fastest external drives would have Thunderbolt connections - I've two of LaCie's 2big Thunderbolt drives (one 4TB and one 8TB) and they're nice and fast, but not cheap.
If I were you, I would head over to MacMall and search for Thunderbolt drives: they come with a variety of option in a variety of storage space.
That's going to be your fastest solution, even if not highly portable.
Good luck,
Clinton

Need to make Partner maintanance mandatory in installed base.

Similar Messages

Maybe you are looking for