Need to make tv shows playable again in iTunes

I have lots of items in my <~/Movies/TV Shows> file that do not show up in my iTunes TV Shows listing. What have I done? How can I make them visible again in the ITunes list. Some, or maybe all of these, I tried to trash at one point, and when asked if I wanted to keep the files, I said no. However the files are still present, and I would now like to see them again via iTunes. The files will play via Quicktime on the Mac, but I need to get them on to my iPad.
iMac running 10.9.4. iTunes 11.4. iPad running OS8.

If you're under warranty, exchange it! I did this today after appt at store, delted all apps and reloaded, with the same result. Technician informed me that Classics (I have 120GB) have a firmware issue that cannot be updated externally, so they exchange them with a new one.

Similar Messages

I just bought an Ipod nano 5th gen and when i plug it in to my computer it notices it but it wont show up on my itunes i would like to know how to get to do so?

I have recently bought an ipond nano 5th generation. When i plug it in to my computer it shows up but it wont show up on my itunes. I would like to know how to make it show up on my itunes?

I am assuming you are using a Windows computer - iPod appears in Windows but not in iTunes

Silver Mini shows up Green in itunes...

It's likely that this iPod has a different logic board than originally came with it.
Is it possible to make it show up Silver in itunes instead of green?

Have you tried to do a Restore? Bear in mind by doing that it will erase your iPod completely

I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people :(

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people

There is no way to export Faces information.
I'm not sure why you would do this:
If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again,
If space is an issue then move the whole Library to an external drive:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Question: I need to make an InDesign CS5 slide show

I need to make an InDesign CS5 slide show that loops. Adobe says this is possible, but I don't understand how to do it in a loop and without button activation. (In other words, it should be activated "on loading." Can anyone help me?
Thanks in advance.

Hi Mrs. Fooj,
Welcome to the Support Communities!
The person who created the slideshow for you in iMovie could burn additional DVD's for you, or export the iMovie project to iTunes to create the file you need.
iMovie '11: Use your movie in GarageBand or other Apple applications
http://support.apple.com/kb/PH2281?viewlocale=en_US
And this information is from the iMovie Help menu in the application:
To send your project to iTunes:
Select a project in the Project Library, and then choose Share > iTunes.
Select one or more movie sizes to render from the table of options.
Click Publish.
Rendering can take up to several minutes depending on the size of your movie and whether you’re rendering several sizes at once. After the project has finished rendering, iTunes opens automatically.
Depending on how you plan to use the shared project, do any of the following:In iTunes, click Movies (below Library) to see your movie and broadcast it through Apple TV or sync it to iPod, iPhone, or iPad.
I hope this information helps ....
Have a great day!
- Judy

HT1311 Just wondering why my comments on Facebook do not show via iOS. Is there any setting I need to make on my iPhone 5,I love this phone. Thanks

Just wondering why my comments on Facebook do not show via iOS. Is there any setting I need to make on my iPhone 5,I love this phone. Thanks

Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
~Lyssa

If I buy a MacBook pro now, what will happen with it once the Lion OS makes it's appearance? Will I need to buy a new one again?

If I buy a MacBook pro now, what will happen with it once the Lion OS makes it's appearance? Will I need to buy a new one again?

Lion will run on most Intel machines. It will not run on the following machines:
MacBook Pro (sold before October 2006)
MacBook (sold before November 2006)
Mac Mini (sold before August 2007)
iMac (sold before September 2006)
It requires an Intel Core 2 Duo (or later CPU). Those machines listed above were all Intel Core Duo machines and with the exception of one of the Mac Minis, an Intel Core Solo. So we're talking 4+ year old machines. I have not tested Lion on a machine with anything less than 2GB of RAM.
Wikipedia has a pretty good public summation of what's known so far and it's quite accurate - http://en.wikipedia.org/wiki/Mac_OS_X_Lion
The biggest thing of note so far is that you cannot install/run Rosetta. Which maybe problematic for some users.

What will it take to get Apple to make iOS 6 available again?

As customers, what can we do to persuade Apple to make iOS 6 available again? I am well aware of the fact that no one put a gun to our head and made us download this new operating system. I even watched the Apple dog and pony show in June, so I should have known better! But as a senior user, I had no idea that the thin line fonts would be so hard to read. The phone keypad is a good example. Is anyone out there having similar problems?
Thanks in advance for answers to my questions.

Sadly, Apple codes the new updates in a way so you can't downgrade to the previous update, such as iOS 6.
But you can change the font! Go to:
SETTINGS>>GENERAL>>ACCESSIBILITY and there is a whole new section to customize the iOS 7 font.
[Source] Includes visual presentation if you need help changing the font.
http://www.imore.com/how-bring-bold-fonts-back-ios-7-your-iphone-ipad-and-ipod-t ouch
Hope this helps

How can i make my songs playable?

since i updated to ios 5, i lost all my songs, even though i clicked the "update" not "restore" now i gotta start all over again, but this time when i tried to put some songs on there it showed up as this i dont know what that gray area means, im thinking it was the iCloud but i already chose to put backup on my computer, instead, then when i also checked on my ipod touch, nothing was there. so how can i make my songs playable offline?

i figured this out, you have to go to settings > general > itunes wifi sync OR when you're plugged in with itunes you have to check "sync with this ipod over wifi" so that way, when you try to transfer your files, it goes back to black mode instead of gray.. i know, its kinda dumb.. idk why they make things hard for us to figure it out. but thats how it works.. hope that helps

"Don't show this again" checkbox in prompt?

All,
So I have a few scripts that are designed to act on the currently open document.
Some of them by nature are pretty destructive to the document because they're designed to do some crazy stuff.
So, when the user runs the script, I'm currently presenting them with a "confirm" dialog with a blurb explaining that they should make sure to save the document before running the script (so they can always return to the previous state).
Anyway, one of my co-workers was complaining about have to see this dialog every time they run the script, as well as some other alerts I use when there are errors.
So, there's basically 3 dialogs the user will see:
1. Confirm (Did you save your stuff, first?)
2. Script Parameters (ScriptUI controls to adjust the various script settings)
3. Success/Error messages
Is there a way to add a "don't show this again" checkbox to the confirm modal dialog so that it would only show the first time the script is run (per session)?
I can probably hide the Success/Error alerts by just adding a checkbox in the ScriptUI dialog, which would obviously set a variable, but in order to keep the confirm prompt from showing the next time they run the script, I would imagine I'd have to store a "cookie" type object on the users local drive? Is that possible?

You don't need a cookie… A plain text file somewhere should do you… If you were to write in the Folder.temp directory it should be flushed at computer restart… ( or so I think not checked that )

Why do we need to make Delta Green some times

Hello Exoerts,
Today a delta was running for a long time and i killed the job in source and made the delta red and repeated again,
when discussing with some senior colleagues, they said, you should not make delta always red. Is there any situation like
we need to make delta green and request for another delta. I dont understand the total scenario.
Can any one explain me.
Full points assured **
Thanks in advance

If we records were showing zero, they asked me to do red and then go for new delta again
and more situation like, the job has not yet created in source system for some reason and the delta got failed , even in this scenario, they asked me to do Green.
I am not sure about this..
Just want to confrim .
Please let me know..
Thanks

Application hidden by Finder won't show itself again?

Short version of my problem: an application that was open and running, and was hidden by me via the Finder, now won't show again. It's icon in the dock still shows the little black triangle, so I'm assuming that it's still open and running, but is this true? And how can I get the application to show itself again?
Now for the details: the application in question is Bryce 6.0, a fairly new app but I've had no problems with it up to now. I've also been using Bryce since version 4, about 5 years, so am quite familiar with it. For those who don't know, it's a low-end 3D landscape program. It's one of those apps that automatically take over your full screen, so if you ever need to access the Finder for anything, you have to 'Hide Bryce' via the Finder menu. I've done this many times before with no problems.
I'm currently rendering a complicated 3D scene, and it's going to be a long render, lasting several days. This is for a commercial project I'm working on, for which I have a deadline. Time is tight, so I really need to know NOW how to fix this. I need to know if the application is still rendering, because if it's not, I need to restart the render. I'd rather not do this if I can help it, as it would mean I've just lost 2 days of rendering time.
I suspect that the rendering may just be so system intensive that it can't find the power to reveal itself, but I may be wrong, and I still need to see what's happening anyway.
No other application seems affected, other items in my dock open OK.
I've tried clicking on the icon in the dock, and when the little window pops up, clicking on 'Show': nothing happens. I've tried going to the Finder menu and clicking on 'Show All', and it doesn't show. I've no other apps open (except Safari right now, of course): I've tried closing everything else, but it hasn't helped.
If I restart, I lose the render I'm doing, which is a MAJOR setback. I won't be able to continue from where I left off, but will have to start again from the very beginning.
Can anyone please help?
I'm using a PowerMac G4 Digital Audio 733MHz, with an extra 100GB hard drive, 1.25GB RAM, and an ATI Radeon 9800 Pro 256MB graphics card. OSX 10.4.7
G4 Digital Audio Mac OS X (10.4.7)

Hi Michael, thanks for getting back to me, I appreciate it!
Recent hangs = 0.
Hiding the Finder/hiding others doesn't reveal Bryce. I just see my desktop.
I can kind of understand how it might be using too much power to reveal itself, which seems to make a weird kind of sense. But on the other hand, it had no problem showing itself before I hid it. If I hadn't needed to do some searching in the Finder for some other files, I'd never have hidden it...

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

Hi Stephen, thanx...
Yes, we are talking about FCP X...this is the thing:
I worked on a project a few days ago and went to share - export movie.
Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
I tried to import the saved .mov file, but it opens the same....as one long clip...
Pls help...thanx.

I hid the toolbar(file,edit,bookmarks,history...etc.) backward,forward arrow and home icon also,how to show it again???tnx

i hid the toolbar(file,edit,bookmarks,history...etc.) backward,forward arrow and home icon also,how to show it again???tnx
== This happened ==
Just once or twice
== last night

'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)
Press ALT+ V T M (CTRL+V T M on Macs) on your keyboard. This should restore the menu bar (Firefox 3.6)
'''Other toolbars'''
View|Toolbars|Select the desired Toolbar
'''Other steps to try'''
Try restoring the default set by going to View|Toolbars|Customize| Restore Default Set. This will put the toolbars back in the default place
'''Safe Mode'''
You May need to reset toolbars and controls via [[Safe Mode]]
Make sure you completely close Firefox first. When you get to the Safe Mode window, select Reset toolbars and controls and then Make Changes and Restart.
Hope this helps!

Need to make tv shows playable again in iTunes

Similar Messages

Maybe you are looking for