Need to make "UNDO" WBS element Field in Notification as madatory

Hi all,
As per current settings of M1 Notifications, WBS element in Location data tab is Mandatory. I nedd to undo this setting and make Maint Plant as mandatory. But I do not know how to do so..
Please help.

Hi Animesh,
Even after doing the above if your problem is not solved then the error is due to some enhancement made to your system.
That is not a Customisation issue.
Take help of an ABAPer and ask him to debug the same. He will be able to point out the exact problem. Also he will be able to point out where the problem is coming from. But you need to have a good ABAP guy.
MLN Prasad

Similar Messages

  • How to make WBS element field in Notification a mandatory.

    How to make WBS element field in Notification a mandatory.
    Should I use USer Exit.
    In cutomization I didnt find ant standard customization

    Hi,
         If it is about WBS element field in Maintenance Order then check up user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event
    For Notification i am not sure whether this field is ther , but anything u can perform checkings via 
    QQMA0014 QM/PM/SM: Checks before saving a notification
    Alternatively u can also explore via Transaction variant SHD0 ..
    regards
    pushpa

  • WBS element field mandatory for specific sales order

    Hi Friends,
    I want to make the WBS element field in sale order line item to be mandatory for a specific sales order type. I am not able to add this field in incompletion log also. So can anyone let me know the solution for this.
    Ratna

    Hi,
    As solution suggest above is correct use VBAP table and Field is PS_PSP_PNR into ur incompletion log and assign this procedure to ur Item category. And If u want to WBS element check at header level the use VBAK table and field PS_PSP_PNR and assign this incompletion log to ur sales document type.
    Once more setting is required to stop the order from saving if incompletion check is unsucessful, for that you need to check a checkbox named "Incomplete. Message" in VOV8 tcode, for ur perticular sales document types.
    Hope this will resolve ur problem.
    rgds
    Dhiraj

  • WBS element field to Depreciation Simulation Report  output display

    Hi SAP Experts,
    We need to Add the WBS element field to Depreciation Simulation Report  output display (S_ALR_87012936)
    Could please give your valuable inputs
    Thanks
    Hari Pothula

    HI Javed,
    We have capitalized with WBS element but not displaying in simulation report.
    All configurations done in in ACSET and activation Account assignment objects
    Thanks
    Hari

  • Need Profit Centre,WBS element fields in Customer/Vendor Line item display

    Dear Experts,
    In Standard SAP we do not have the Profit Center, WBS Element in Customer / Vendor line item functionality. Now we need to develop user exit, when User try to post transactions like MIRO, F-02, FB01 system should ask the Profit Center field and WBS Element field in Vendor / Customer line items.
    I dont know the actual functionality, The consultant has given example as 3 transactions, Do we need to update any other transactions also. If yes please provide me the information.
    Can anyone help me with the solution.
    Thanks in advance.
    Regards,
    Abdur Rafique

    I have used User exit, to obtain the above scenario.

  • In f-02 GL item fast entry i need to add WBS element field

    Dear All,
    In GL item fast entry screen f-02, I need to add one field WBS element.
    Please help me how to add the WBS element field in upload fast entry.
    Best Regards,
    Venkat.

    Dear,
    Use transaction O7E6 to add WBS Element into your variant.
    You can find your variant which is assigned in FB00.
    Regards,
    Chintan Joshi

  • WBS element field in the customer line item

    Hi Experts
    Clientu2019s requirement is to populate the WBS element in the customer line item.
    Field status of Posting key -01 for WBS element is u2013 Optional
    Field status of Customer recon a/c  for WBS element is u2013 Optional
    Still in the customer line item screen, the WBS element field is hidden.
    Kindly advise how to make the field WBS element available in the customer line item.
    Regards,
    Purnima

    Hello,
    When you post customer invoice, screen no 301 is active. Here you can find only fields like payment terms.baseline date,payment block etc.
    As this is not a cost object you will not find cost center, wbs element. You could find them on credit item.
    Regards,
    SK

  • WBS element field in PO

    Hi All
    How can we make the WBS Element in ME22N transction in display mode.
    our purpose is user not to change the WBS element in ME22N
    Please give me solutions

    You can control using transaction OME9 for a/c category P for project and make project as display but it will be display in creation mode also.
    so if you have specyfic to change mode than use user exit  MM06E005 to control the field in change mode

  • WBS element field in SO for milestone billing

    Hi,
    I am using Milestone billing. When I am trying to create the Sales order the WBS element field is greyed out. Pleae advise.
    Regards,
    Santanu

    Hi Shantanu,
    I think you need to remove the assignment of the requirement type KE from your item category. I gues you are using TAO as the item category for Milestone.
    You go to Sales and DistributionBasic FunctionsAvailability Check and Transfer of RequirementsTransfer of RequirementsDetermination Of Requirement Types Using Transaction.
    Hope it helps.
    Shivaji.
    Edited by: Shivaji  Paul  Choudhury on Mar 2, 2009 4:21 PM

  • How to keep wbs element  field in display mode in me22n?

    Hi all,
    Can somebody please guide me how i can keep wbs element field available at account assignment Tab at item level in transaction me22n as display mode?

    Hi Dhruv,
    You can implement BADI ME_PROCESS_PO_CUST  and implement the method FIELDSELECTION_ITEM.
    I have pasted the SAP documentation available below. Please try this.
    Field selection (FIELDSELECTION_HEADER_REFKEYS, FIELDSELECTION_ITEM_REFKEYS, FIELDSELECTION_HEADER, FIELDSELECTION_ITEM methods)
    In the following methods, you can change the display properties of fields by supplementing or switching the field selection reference keys:
    At header level FIELDSELECTION_HEADER_REFKEYS
    Documentation for BAdI method FIELDSELECTION_HEADER_REFKEYS
    At item level FIELDSELECTION_ITEM_REFKEYS
    Documentation for BAdI method FIELDSELECTION_ITEM_REFKEYS
    You can implement special rules using the methods FIELDSELECTION_HEADER (at header level) and FIELDSELECTION_ITEM (at item level).
    Documentation for BAdI method FIELDSELECTION_HEADER
    Documentation for BAdI method FIELDSELECTION_ITEM
    Special Field Selection Item
    Functionality
    The FIELDSELECTION_ITEM method enables you to influence the field selection properties for a field.
    Parameters
    The following parameters are available:
    IM_HEADER - Document header
    The interface reference is of the type IF_PURCHASE_ORDER_MM.
    IM_ITEM - Document item
    The interface reference is of the type IF_PURCHASE_ORDER_ITEM_MM.
    CH_FIELDSELECTION - Fiele selection table
    By making changes to this table, you can influence the display properties of a field.
    This table consists of value pairs <METAFIELD|FIELDSTATUS>.
    The Metafield represents a business content (e.g. the PO quantity). Thus, for example, the database field EKPO-MENGE is linked to a certain metafield value just like the field MEPO1211-MENGE on the item overview screen in the purchase order.
    Through this abstraction, reference can be made to business contents on a uniform basis.
    Standard metafields are defined in the type group MMMFD.
    The field selection status has four possible instances:
    '-' Field is suppressed
    '*' Field is purely a display field
    '.' Input field
    '+' Mandatory field
    Notes
    Under no circumstances make any changes to the database within this method. On no account use Commits.
    For WBS element the meta filed no is 512.
    mmmfd_wbs_element     TYPE mmpur_metafield VALUE 512.
    In IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM method you can write the code as follows:
    field-SYMBOLS : <FIELDSEL> like line of ch_fieldselection.
    DATA: l_persistent TYPE mmpur_bool.
    l_persistent = im_ITEM->is_persistent( ).
    READ TABLE ch_fieldselection ASSIGNING <FIELDSEL> WITH TABLE KEY metafield = '512'.
    IF sy-subrc IS INITIAL.
      <FIELDSEL>-fieldstatus = '*'. " Field is purely a display field
    ENDIF.
    Try this, it should work.
    Regards,
    Savitha
    Edited by: Savitha Madhavagiri on Jan 8, 2010 4:20 AM

  • I need to make the ordered quantity field (RV45A-KWMENG) disabled in 'VA02'

    Hi SAP COMMUNITY,
    I have urgent requirement for which i did'nt worked before on this requirement. I hope you people can help me in this regerd.
    My requirement is, I need to make the ordered quantity field (RV45A-KWMENG) disabled in the transaction code is VA01/VA02. User should not be able to edit this ordered quantity in VA01/VA02 Transaction.
    Here the condition to disable this field ordered quantity is IF ORDER TYPE EQUAL TO OR AND IF ITEM CATEGORY EQUAL TO TANN in technical IF VBAK-AUART EQ OR AND IF VBAP-PSTYV EQ TANN then only the field (RV45A-KWMENG) ordered quantity should be disabled in that transaction VA01/VA02.
    Correct me if iam wrong, I think in the program SAPMV45A and do we need to include any screen number which i have seen in VA02 is 4001. Do we need to write a code in Include MV45AFZZ (FORM USEREXIT_FIELD_MODIFICATION.). But i don't know what code i need to write here to disable this field.
    I had searched in the forum some example code so please suggest me whether i can use this and if i can use this please suggest me how to write the condition and insert the code in that FORM. If this sample code is wrong then please suggest me what exact code should be given. Can anyone help. Quick response will be much appreciated.
    Looking forward for ur prompt replies.

    As per my understanding , To disable the field RV45A-KWMENG based on the condition for Transaction VA01/VA02.
    The conditions which i need to check is Order Type and item category.
    I understand that this is the code which i need to insert for disabling the field but i have a question here, where is the condition here and how the system understand for this field RV45A-KWMENG it has to disable. I think we need give the condition as if RV45A-KWMENG....... Another one if iam not wrong we need check that it has to be done in VA01 and VA02 then only this condition should be executed.
    IF VBAK-AUART EQ 'XXX' OR VBAP-PSTYV EQ TANN .
    IF SCREEN-NAME = 'XXX'.
    SCREEN-ACTIVE = 0
    ENDIF.
    ENDIF.
    Please suggest me the better way how can i do it in the coding.
    Awaiting for ur prompt reply.

  • Which PO and PR table can be used to get the WBS element field.

    Which PO and PR table can be used to get the WBS element field. Thanks.

    HI,
    In the PO the concerned field for WBS element shall be tracked in the Item details and the account assignment tab in PO.
    It shall be checked from EKKO table with PS_POSI feld.
    The same shall also be tracked in PR from EBAN table .please refer the account assignment tab in the PR item details.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • Adding f4 help to wbs element field in account assignment tab of me21n

    My requirment is to create f4 help for wbs element field in account assignment tab of me21n,
    I have to pick wbs elements according to plant and storage location assigned in item overview of purchase order.
    for that i have created a ztable. and use it in f4 code,  or help me if any  other suggestion u have.
    thanks,
    Amol.

    Try to use screen-exit for assigning the serach help. There is one screen exit for PO ..
    Check the enhancement - MM06E005 ,
    Create project in cmod and use this enhancement.
    use the PROCESS ON VALUE-REQUEST event and  use FM 'F4IF_INT_TABLE_VALUE_REQUEST'
    hope this will resolve the issue.
    anya

  • WBS element field blank in MB51 report.

    Dear Experts,
    I m using ECC 6.00 EHP4, My problem is we issue the project material with movement type 221 Q but in MB51 report if I want to get the output with WBS element with Movement type 221 q data is not showing if I give only movment type 221 Q and WBS field blank than in output screen WBS fileld shown blank please clear me where is the problem..
    Neeru

    Anyone please...
    Neeru Dimri

  • WBS element field in transaction CS71-F4 help is not working in ECC 6.0

    Hii
    In SAP, while working in SAP 4.7, tcode cs71, WBS element is coming via F4 Help. But after upgradation to ECC 6.0 EHP 5, this F4 help is not working. I can enter value manually.but F4 help is not working.
    Please Help.

    Hi,
    You can do it manually too
    1.  Choose function group 'CSDI' via Transaction SE80.
    2.  Choose screen '0260'in the 'Screens' area and switch to change mode
    3.  Choose the 'Element list' tab index.
    4.  In this area, choose the 'Reference' tab index and enter the value
        'PRP' in the 'Search help' column in the line for field
        'RC29N-PSPNR'.
    5.  Save your change and regenerate the screen.
    6.  The correct input help for the WBS element is now available in the
        initial screen of Transaction CS71/72/73.
    I hope F4 helps works for "Existing WBS BOM's" in CS71 after this
    Refer to Note : 714824 as well , it has reverted back the changes done by note : 422265
    Regards
    Gaurav

Maybe you are looking for