Need to manually install a package with no network [SOLVED]

I have a new laptop and can't get the network to run. According to the wiki, I can run 'hwdetect --show-net' to figure out which module I need. Problem is I can't use pacman to get hwdetect I grabbed it from the /var/cache/pacman/pkg and put it on a usb stick and copied it to the laptop's /var/cache/pacman/pkg but I can't install it... help
EDIT: NEVERMIND, I used the -U switch as if I built it from a PKGBUILD file and it work!
Last edited by graysky (2009-09-12 16:16:11)

Try http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Follow the Very Important Instructions on that page first otherwise the links won't work.

Similar Messages

My mac mini will not shut down. I need to manually shut it off with the power button.

My mac mini will not shut down or restart. I need to manually shut it off with the power button.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

Installing multiple packages with pkgadd...

hi there,
sorry about this silly question but I am having some problem to install multiple packages with pkgadd. Basically I have packages with this form "apache-2.4.3-sol10-sparc-local" and not with pkg extension. So, checking the man page pkgadd -d /packages/dire/ all suppose to work, but it doesn't.
I am sure I am doing a very simple error but couldn't figure out.
It will be appreciated if someone help.
Cheers!

Hi.
pkgadd -d - used for install many packeges from one location.
location may be:
1. Directory
2. Separete file.
You have many files that contetns packages. You can't do it with one commands, or you should previos converst all packages to one file ( man pkgtrans).
You should use command:
pkgadd -d <path>/apache-2.4.3-sol10-sparc-local all
pkgadd -d <path>/gmp-4.2.1-sol10-sparc-local all
pkgadd -d <path>/libtool-2.4.2-sol10-sparc-local all
pkgadd -d <path>/ readline-6.2-sol10-sparc-local all
pkgadd -d <path>/coreutils-8.19-sol10-sparc-local all
pkgadd -d <path>/libgcc-3.4.6-sol10-sparc-local all
pkgadd -d <path>/openldap-2.4.32-sol10-sparc-local all
pkgadd -d <path>/sasl-2.1.25-sol10-sparc-local all
pkgadd -d <path>/db-4.7.25.NC-sol10-sparc-local all
pkgadd -d <path>/libiconv-1.14-sol10-sparc-local all
pkgadd -d <path>/openssl-1.0.1c-sol10-sparc-local all
pkgadd -d <path>/sqlite-3.7.13-sol10-sparc-local all
pkgadd -d <path>/expat-2.0.1-sol10-sparc-local all
pkgadd -d <path>/libintl-3.4.0-sol10-sparc-local all
pkgadd -d <path>/pcre-8.31-sol10-sparc-local all
pkgadd -d <path>/zlib-1.2.7-sol10-sparc-local all
Regards.
Edited by: Nik on 22.10.2012 4:06

I have a 17 inch Mac book, after migrate to Lion, I take 25 seconds to shutdown. all progams are closed. any reason?? Need I to install a native Lion OS to solve the problem? Regards, José A. Pereira

I have a 17 inch Mac book, after migrate to Lion, I take 25 seconds to shutdown. all progams are closed. any reason??
Need I to install a native Lion OS to solve the problem?
Regards,
José A. Pereira

Hi, Processor 2.66 Ghz Intel core i7, memory 8Gb 1067 Mhz DDR3.
on shut down a White screen occur with a star flashing during more or less 25 seconds. before update to Lion, 3 or 4 seconds to shutdown. no more app installed or removed. it stills the same usage.
I will be greatful if you can help me.
Regards,
José A. Pereira

Need help in installing JBOSS along with Jdk version

Hi,
I am using Linux 64 bit Machine.
I have Jdk1.5.0_18 and jboss-4.2.3.GA installed in my machine.
But the JBOSS Server is failed in booting.
What version of JBOSS Server needed for the 64 bit along with Jdk1.5.0_18
Any help will be needful for me
Thanks and Regards

The name of this forum is "Database - General" not JBOSS, JDK, or "anything goes."
Please delete this post and post your question in the appropriate forum.
Thank you.

[SOLVED] How to install AUR packages with patchname.patch

Hi all,
I'm trying to install lottanzb from the AUR and there's are a dependency called par2cmdline 0.4-13 that has a lot of nameofpatch.patch that are included in the AUR par2cmdline 0.4-13 package page that just open up to a url that shows code.
I created patch files from the code displayed in the url with a text editor and added them to the extracted LOTTANZB folder in my build directory but when I go to build the package with PKGBUILD it runs through a check sum while building and the checks don't match.
I'm obviously doing something fundamentally wrong here. Can someone direct me?
Thanks,
Last edited by bennylb0 (2010-05-28 13:30:16)

Hi, thanks for reply.
Sorry, my mistake.
I did place patch files inside the par2cmdline-0.4 folder. The only reason I created the .patch files and placed them inside par2cmdline-0.4 folder was because the PKGBUILD as well as the other 5 .patch files didn't exist inside the extracted build folder. They only place I could find them was in AUR par2cmdline-0.4 displayed as a url.
When I copied and created the PKGBUILD as it did not exist inside the extracted folder par2cmdline-0.4 folder I received the following error:-
Error autoconf.patch was not found in the build directory and is not a url. That along with 4 others do not exist in the build directory.
You can see this bellow:-
[ben@ben par2cmdline-0.4]$ makepkg
==> Making package: par2cmdline 0.4-13 i686 (Fri May 28 22:08:21 EST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading par2cmdline-0.4.tar.gz...
--2010-05-28 22:08:23-- http://downloads.sourceforge.net/source … 0.4.tar.gz
Resolving downloads.sourceforge.net... 216.34.181.59
Connecting to downloads.sourceforge.net|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://downloads.sourceforge.net/projec … 0.4.tar.gz [following]
--2010-05-28 22:08:23-- http://downloads.sourceforge.net/projec … 0.4.tar.gz
Reusing existing connection to downloads.sourceforge.net:80.
HTTP request sent, awaiting response... 302 Found
Location: http://transact.dl.sourceforge.net/proj … 0.4.tar.gz [following]
--2010-05-28 22:08:24-- http://transact.dl.sourceforge.net/proj … 0.4.tar.gz
Resolving transact.dl.sourceforge.net... 202.55.147.10
Connecting to transact.dl.sourceforge.net|202.55.147.10|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 239312 (234K) [application/x-gzip]
Saving to: "par2cmdline-0.4.tar.gz.part"
100%[===================================================>] 239,312 179K/s in 1.3s
2010-05-28 22:08:26 (179 KB/s) - "par2cmdline-0.4.tar.gz.part" saved [239312/239312]
==> ERROR: par2cmdline-0.4-autoconf.patch was not found in the build directory and is not a URL.

How to install multiple packages with pacman?

Hi ,
I guess it's a pretty noobish question but I wonder how to install multiple packages
that have the same prefix with Pacman.
To make myself more clear, I like to install all gstreamer packages and for that I would
like something similar to
pacman -S gstreamer10*
Is there a command that does something like this available? Found nothing in the man pages.
Maybe some tricky stuff with pipes?

sH wrote:Hi ibendiben,
thanks for your help, but I'm afraid, it does not work
I'm so sorry, my fault, I couln't test it, and made some big mistakes.
This time it's working:
pacman -S $(pacman -Ss gstreamer0.10 | sed -n 's#^$[^/]*/gstreamer0.10[^ ]*$ .*$#\1#p')

Still necessary to manually install kernel modules with CUPS?

I'm just setting up my system with CUPS for printing. In the "Configuring CUPS" section of the wiki, you're instructed to install the appropriate kernel module with modprobe for using a usb or parallel port printer. With my usb printer and kernel 2.26.9 I found this is unnecessary. Plugging in the printer caused the module to automatically load. Is this because I'm using input hotplugging? And in any case, should the wiki be edited to reflect situations where loading the module manually is no longer necessary?

Sure, feel free to edit the page to reflect what you're seeing, which is udev autoloading the appropriate module when it detects the device. This functionality has been in place for a long time, and is not related to input hotplugging as used in xorg (not sure if that's what you're referring to above).

Installing a package with "-S" and few versions available

What if I install from some repo "pacman -S app" and there are few versions of "app" and I don't concretize it for pacman? What version will it install? I know that with "-U" I can tell it what version to install. But how does "-S" behave without concretizing?

You can specify the repository you want pacman to use.
pacman -S repo/program
Or you can specify the version:
pacman -S program=version

[Solved]Cannot install any package with pacman

Hi,
today i tried a system update via pacman -Syu and i get these error messages
Konnte Datei 'curl-7.19.6-1-i686.pkg.tar.gz' nicht von ftp.archlinux.org übertragen : File unavailable (e.g., file not found, no access)
so it seems that these files are not on the servers
i have already tried different mirrors even the archlinux.org one
Last edited by kanim (2009-08-18 09:08:19)

It is fixed. You just need to be patient and wait for the mirrors to resync. As many mirrors need to resync all the repo packages, there are not enough bandwidth for all the mirrors. So it will take some time. ftp.archlinux.org is a mirror just like the other ones. The only difference is that we are the ones in charge of it.
For details on what happened, see:
http://archlinux.me/brain0/2009/08/16/s … l-scripts/

Install additional packages with OUI?

I installed 8.1.5 using the "typical" configuration. When it
finished
there was no Context option. How do I get the OUI to
install context as a seperate product without installing
the whole db again?
thanks,
-mark
null

If you don't have access to ULN, your best bet is to check out Oracle's public yum server at http://public-yum.oracle.com. There you will be able to find a mirror of all of the ISO content (no errata/patches) but in yum repo form.

Need Help Connecting New MacBook Pro with Wireless Network Password

Hi Linksys Community,
I would like to ask for your help and advice.
I recently purchased a new MacBook Pro, OS X, Version 10.8.3.
I need to setup a password to the wireless internet network (I've successfully done this)
I have a Wireless G, WRT54G Router.
When I setup the password, I'm not able to connect to the internet with my new MacBook Pro, which is running Mac OS X Version 10.8.3. I get the message 'cannot connect to Internet, connection timeout) However, I'm able to connect to the internet with an older MacBook Pro, and my iPad. The password works fine with other models.
Would anyone be able to help me troubleshoot what is going on, or how I can solve this problem?
I would like to be able to have a password on my network, and use the internet with my new MacBook Pro.
I have read about manually adding in the MAC address of computers, and setting up a Wireless MAC fiter.
Does anyone think this would solve the problem? if so, how can I find out the MAC address of my MacBook Pro?
Thanks in advance for you help and time!

Hi,
Thanks for your response.
Yes, my computer connects when your network is open (no password set)?
I used WPA Pre-Shared Key.
Do you know how I could check if my new MacBook Pro is compatible with this?
Thanks!

AirTunes cut-outs with wired network (solved)

To whom this may be helpful,
There are several discussions about Music cut-outs when using the AirTunes, but all of these discussions were focussing on a wire-less connection.
In my case, however, I have a wired Ethernet connection from my Mac to a 4-port-router, to which the AirPort Express is also connected. I got the first cut-outs about a year ago and it has been gradually getting worse, up to the point where it would cut out after every 5-10 seconds, pausing for 5 seconds. This is when I gave up using AirTunes.
Next, nothing much happened until I noticed a few weeks ago that my network had become notoriously slow. I first suspected a degrading ADSL connection, but I changed my mind when my router died. It turns out that my network performance was gradually degrading due to problems in my router (probably bad memory, forcing it to drop packages when the checksums were incorrect).
After having replaced the router, the network is up and running again as before and AirTunes runs smoothly again. With that in mind, you might like to test other units in your network!
Mac G4 Mac OS X (10.4.9)

I buyed 2 of the Airport Extreme, never got them working fine, till yesterday...
I have A Zyxel ADSL WLAN Router Switch. WPA-PSK as I wanted a secure Network. Both of the AX were connected with static IPs. WLAN was always working fine, but I had many cut outs with airtunes. I wanted a solution with lossles streaming audio with the possibility to connect my Receiver digitally. That's why I bought my first Apple hardware, as I was always told, Apple=Plug'n play. Very frustrating!
I tried other switches, Routers, WLAN adapters and cards, nothing worked. Airfoil does not support multiple speakers yet, so it's useless for me.
In the FAQ of the Airtunes, Apple mentioned to use lower security, as some Computers probably do not have enough power to stream music flawlessly. But my Computers really do have enough power! I think the AX does not have enough power to do that. So I created another wireless network with one of my AX. I set the security to WEP-40bit key and joined this new Network with my other AX. Not the best solution, as I'm now connected to the Internet or to the AX to use Airtunes. Cables could fix that problem, but then I could use a wired system instead...
I use Channel 11 for the AX WLAN (the only clean channel in my area), Multicast to 11, only G mode for Wireless and a 5 characters WEP-40 key and no WDS. Seems to work at the moment.
I hope this will help others with the cut or drop out problem

How to install package with documentation

hi, i installed emacs but the manual is missing in this instalation.
How can I force to install a package with manual and other documentation?
Thanks

i solved it. I used the correponding option in PKGBUILD and compiled again. R.M.

Install package with extra switches

Is it possible to install a package with extra switches that you would normally give with the configure command?

vinyl wrote:Is it possible to install a package with extra switches that you would normally give with the configure command?
this is what srcpac was made for - run "pacman -S srcpac" and then check out the man page (there's alot to explain)
however, as noted, you're going to have to recompile the app, but it's not all that hard with srcpac.... you add the additional line in srcpac.conf and run "srcpac -S some_app"... if there is no line in srcpac.conf, srcpac installs the app through pacman... it's very cool
for the record, if the repos had one package for every switch, they would grow to huge proportions... imagine 20 vim packages, one for each flag... and that's just vim... KDE and gnome would make the repos hit huge proportions...

Need to manually install a package with no network [SOLVED]

Similar Messages

Maybe you are looking for