Need to move 10.2.0.4 on Windows 2003 to 11.1.0.7 on Windows 2008

I need to move 10.2.0.4 on Windows 2003 to 11.1.0.7 on Windows 2008 and I'm wondering what the best path would be to do so. We're thinking we'll upgrade the database to 11.1.0.7 on the existing Windows 2003 server and then perform an rman backup and restore to a new machine with Windows 2008 11.1.0.7. Does anyone have any other suggestions or words of wisdom? Kind of a newbie here. Thanks for your help.

If the database is not too big, exp/imp would be another option. Transportable tablespaces might be an option too.
MOS Doc 243304.1 - 10g : Transportable Tablespaces Across Different Platforms
HTH
Srini

Similar Messages

  • Need steps for rehosting FR currently running on windows 2008 R2 to LinuxOS

    Need steps for rehosting FR server currently running on windows 2008 R2 to Oracle Linux 5 OS
    I found something for essbase in oracle EPM whitepaper library but not for FR. Did anyone of you out there try this.
    Any ideas/thoughts.
    Thanks in Advance

    If it's 11.1.2.1 or 11.1.2.2 you simply install it in the new host, configure it and you can either manually edit the mod_wl.conf file to point to the new server or you can re-run the web server (OHS) configuration wherever it is installed. Beware though that if you do this you will not be able to run FR against HFM.
    Pablo

  • I need to move my playlists to a new windows machine

    Hi
    I have itunes on a windows machine, I have managed to move my apps and songs over to a new windows laptop but the playlists have not come across. How can I get the playtlists to appear in the new itunes?
    Thanks
    Chris

    See also this migrate iTunes library post.
    tt2

  • Assistance needed during Oracle 11G R2 client installations in Windows 2008

    Hi,
    I am installing Oracle 11G R2 client in Windows 2008 R2 enterprise server. It has JR6 installed. But whenever I am launching the installer from OUI, I am getting the error 'Java: “Could not find the main class. Program will exit” and the installation is getting terminated. Any inputs/suggestions will be great for me.
    Thanks in advance.

    Hi,
    are you able to run java manually? I.e. java --help in the cmd? Are your environment variables (JAVA_HOME) set properly?                                                                                                                                                                                                                                                               

  • I need to move my old hard drive files to our new computer, how?

    Hey I need to move my old hard drive files to our new computer. It is a SATA 3.5. Is it as simple as putting it in an enclosure and plugging it to new computer.
    Can I do this at the start with the IMAC? I don't have the old computer, just the drive.

    *Hi thresherman, Welcome* to Apple's Users Help Users Forums.
    To go from PPC to intel the use of migration assistant is not the recommendation. The definitive solution is here from Kappy and a brody.
    http://discussions.apple.com/thread.jspa?threadID=435350
    Good Luck, JP

  • ASA 5505 Failure replaced and need to move the license key?

    Can someone point me in the right direction? My ASA 5505 died due to a power surge and I swapped it with a spare. I had Security Plus and a 50 user license and need to move the license keys from the failed ASA 5505 to the new one. I kept both my emails with the activation keys, but not sure how I get this transferred?  Thanks in advance.
    Joe

    I think this is totally unacceptable. For anyone else who uses a 5505 at home and has bought licenses and the hardware out of their own pocket, the idea here should be that you've already bought the hardware and the license. Seems obvious, right?
    Yes I can see the license being device specific if not only because that's the way you've designed your licensing activation schema; but if I've just had your product fail and bought another replacement, there should be an understanding or agreement between Cisco and the user that we can reinstate any licenses we've already bought.
    Do you really believe it's fair to make someone buy something from you twice, something that they've already bought from you? Do you actually believe that? I believe that the people in the Cisco Licensing department would agree with my viewpoint and I have a pending case with them for this issue right now. I will post my result here.
    Make your products last and perhaps I can give credence to your licensing beliefs, until then your products fail and so does your licensing logic.

  • I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

    I am trying to move a picture that I brought over from iWeb and it is locked. I need to move it. Can anyone help?

    It is probaly just "inline" ie part of the text.
    click on it > Inspector > Wrap > Floating
    Peter

  • I need to move settings from one computer to another

    Hello All,
    After a computer failure, I need to move the DW CS4 settings (this may not be the best term to use, but bear with) from the dead computer's hard drive (drive works fine) to another machine.
    Specifically, all the settings in Site Manager...I really don't want to enter all that in manually, as I have over a dozen sites to maintain.
    Is there a way to do this? Copy a certain folder or folders, or a utility in DW?
    I have a 2-bay e-sata drive dock attached to the second computer so I can access the files no problem.
    Many thanks in advance!
    Sincerely,
    wordman

    Wordman-GL wrote:
    SE,
    One thing, the drive is accessable on my second computer through the use of a drive dock. The computer that the drve came out of won't boot.
    Cheers,
    wordman
    Bregent is correct about WIndows.
    What I was stating is that if this is the original drive from the other computer it is a bootable drive.  What you would normally do in this instance is tell the OS that you want to boot from the remote drive and not your C:/ drive in the working computer.  On a Mac this can be done by holding down the option key on a restart ( http://support.apple.com/kb/ht1310 ).  Then you are prompted to select the disk you want to boot.  I believe Windows has a similar feature usually using the F keys on startup.  Another way to think of the booting from other drives is that normally the BIOS will look in the USB or CD drive before looking at your hard drive to boot in case you were doing an OS upgrade.  Otherwise, when you restarted, it would ignore the CD/USB installation and go straight to the hard drive.
    If you are on a Mac I know the files are in the Library somewhere, but I don't know the exact filename and I can't find a KB article pointing to what you should be looking for.  But if you are doing this I would be selective and only look for the Adobe and Dreamweaver files and nothing else.

  • Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one.  How, help?? Phone is a 3GS

    Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one.  How, help?? Phone is a 3GS

    So the answer to my question is yes - from an old Exchange account that was provided by a previous employer.
    If so, you can't.
    You can't merge or transfer contacts that were synced over the air with an Exchange account with another account, and the same for syncing the contacts direct with a supported address book app on your computer. This is how most employers want it.

  • I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created?

    I need to move 1000 photos from one library to another. How do I do that and keep the ratings and dates they were created? I tried exporting them, but it loses all info. Also, how do I move the quicktime movies from one iphoto library to another? They were exported as jpgs

    Add both libraries to iPhoto Library Manager.  Then select the events or albums that you want to copy from library A  and drag them to library B in iPLM.
    This video shows the process:
    OT

  • I have CS5 on a PC vith Vista. I need to move it to a PC with windows7. I had originally downloaded it so how do I move it to the new machine?

    I have CS5 on a PC with Vista. I need to move it to a PC with windows7. I had originally downloaded it so how do I move it to the new machine?

    Much the same way as you originally did.  Download it and use your serial number to activate it.
    CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
    If you registered it when you first installed it then your serial number might be available in your Adobe account online.

  • Need to "move" failover to different interface/port

    Sorry if this is the wrong area, we have so seldom had questions that were not otherwise handled I don't frequent this area.
    How difficult is it to change the interface used for active/standby failover? It's a working, already configured pair with standby, but I need to move the crossover cable and tell them to use a different interface. 
    ASA 5510 pair, already set up and working with failover that was originally configured on Ethernet port 0/3 by the senior network admin. It appears that from his use of interfaces or ports he used things straight out of examples on the web, including the interfaces used. 
    The senior network admin retired last spring and left me "in charge", gee, thanks.
    I need to make some changes and need an Ethernet port for a new important project.
    The Management 0/0 interface is unused and shutdown. We manage via inside interface from a specific subnet inside so don't need the dedicated management interface.
    I want to move failover FROM Ethernet 0/3  TO Management 0/0
    *This is the current setup:
    Result of the command: "sh run failover"
    failover
    failover lan unit primary
    failover lan interface failover Ethernet0/3
    failover link failover Ethernet0/3
    failover interface ip failover 169.254.255.1 255.255.255.252 standby 169.254.255.2
    *And this is the current interface configuration for 0/3 and Management:
    interface Ethernet0/3
     description LAN/STATE Failover Interface
    interface Management0/0
     speed 100
     duplex full
     shutdown
     nameif management
     security-level 0
     no ip address
     ospf cost 10
    I know it can run on the Management 0/0 interface because I see a lot of "how to configure" as if the ASA is brand new and several examples out there indeed show it being setup on Management.
    I'm looking for how to take an ASA pair that is currently configured and has a working functional failover configuration and simply "move failover" to a different hole or change the interfaces used for the "heartbeat" as it were.
    I assume it's not hard - but I also assume there's a specific sequence of events that must take place to prevent the pair from going into failover and switching lead roles........... 
    For example - would I shut off or turn off failover, and if so how, and on which ASA (frankly, I'm not sure how to access the secondary or standby if this must be done from or on the standby unit as I've never done that "deep" a config before)
    CLI is fine - I'd be just as comfortable in either ASDM or cli. 
    I sure hope this makes sense - I'm more of a troubleshooter and fixer than a designer or network engineer....
    And many many thanks - getting this moved will free up the interface I need and can really make a big dent in my project list while the supervisor is on vacation this week! I'd love to have this done and working before his return. 
    Oh, in case it does matter as I've been told, this is the Currently running license and versions shown here:
    Cisco Adaptive Security Appliance Software Version 8.4(4)1 
    Device Manager Version 6.4(7)
    Compiled on Thu 14-Jun-12 11:20 by builders
    System image file is "disk0:/asa844-1-k8.bin"
    Config file at boot was "startup-config"
    VRDSMFW1 up 141 days 4 hours
    failover cluster up 141 days 4 hours
    Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
    Internal ATA Compact Flash, 256MB
    BIOS Flash M50FW080 @ 0xfff00000, 1024KB
    Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                                 Boot microcode   : CN1000-MC-BOOT-2.00 
                                 SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                                 IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.06
                                 Number of accelerators: 1
     0: Ext: Ethernet0/0         : address is 0024.972b.e020, irq 9
     1: Ext: Ethernet0/1         : address is 0024.972b.e021, irq 9
     2: Ext: Ethernet0/2         : address is 0024.972b.e022, irq 9
     3: Ext: Ethernet0/3         : address is 0024.972b.e023, irq 9
     4: Ext: Management0/0       : address is 0024.972b.e01f, irq 11
     5: Int: Not used            : irq 11
     6: Int: Not used            : irq 5
    Licensed features for this platform:
    Maximum Physical Interfaces       : Unlimited      perpetual
    Maximum VLANs                     : 100            perpetual
    Inside Hosts                      : Unlimited      perpetual
    Failover                          : Active/Active  perpetual
    VPN-DES                           : Enabled        perpetual
    VPN-3DES-AES                      : Enabled        perpetual
    Security Contexts                 : 2              perpetual
    GTP/GPRS                          : Disabled       perpetual
    AnyConnect Premium Peers          : 2              perpetual
    AnyConnect Essentials             : 250            perpetual
    Other VPN Peers                   : 250            perpetual
    Total VPN Peers                   : 250            perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 2              perpetual
    Total UC Proxy Sessions           : 2              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    This platform has an ASA 5510 Security Plus license.
    Failover cluster licensed features for this platform:
    Maximum Physical Interfaces       : Unlimited      perpetual
    Maximum VLANs                     : 100            perpetual
    Inside Hosts                      : Unlimited      perpetual
    Failover                          : Active/Active  perpetual
    VPN-DES                           : Enabled        perpetual
    VPN-3DES-AES                      : Enabled        perpetual
    Security Contexts                 : 4              perpetual
    GTP/GPRS                          : Disabled       perpetual
    AnyConnect Premium Peers          : 4              perpetual
    AnyConnect Essentials             : 250            perpetual
    Other VPN Peers                   : 250            perpetual
    Total VPN Peers                   : 250            perpetual
    Shared License                    : Disabled       perpetual
    AnyConnect for Mobile             : Disabled       perpetual
    AnyConnect for Cisco VPN Phone    : Disabled       perpetual
    Advanced Endpoint Assessment      : Disabled       perpetual
    UC Phone Proxy Sessions           : 4              perpetual
    Total UC Proxy Sessions           : 4              perpetual
    Botnet Traffic Filter             : Disabled       perpetual
    Intercompany Media Engine         : Disabled       perpetual
    This platform has an ASA 5510 Security Plus license.
    Serial Number: ABC12345678
    Running Permanent Activation Key: eieioandapartridgeinapeartree 
    Configuration register is 0x1
    Configuration last modified by me at 15:03:07.132 CDT Mon Sep 15 2014

    If there was a "smack-self-on-forehead" icon here I'd use it now.
    Of course, totally logical - if you disconnect a monitored connection on the standby it's not about to take over as primary because it's had a failure and can't do the job, forcing the primary or active to remain that way. There's the key that would allow all other changes.
    Since the settings or config lines are in place already, then if I'm correct it's a matter of then just modifying what's there, and of course removing the name of the Management interface (no nameif) and making sure it's not shut down (no shutdown), etc.
    You are a handy person to have around. Thanks.
    By the way, *thanks to prior answers received here* and reading responses to others who had questions I can say I've set a record for this agency and done what no one else had been able to do - I've taken a troublesome LAN-to-LAN connection and made it trouble-free with a solid connection that is just 7.5 hours away from being up 90 days with no interruption, no collapse of any SA and improved performance.  I have 2 others out of our 34 that aren't too far behind that. The boss has recognized this after seeing his monthly up-time reports.
    Once I get this done failover change made I will be setting up a "DMZ" of sorts and trying out my hand at telling the 5510s to forward specific traffic aimed at a specific public IP address to a specific server. (But that's another topic............)

  • I have an old Mac Tower.  I need to move data from the unit to an external hard drive. What kind of hard drive do I purchase.  There is not a lot of data to be transferred.

    I have an old Mac Tower.  I need to move data from the unit to an external hard drive.  What kind of of hard drive must I purchase so that it works with the Tower?  There is not a lot to transfer.

    MG,
    What we might need to do is to change the question.  What computer do you plan to use the data on in the future?  For example, if you have a newer tower, just move the hard drive to the new tower.  If you want to use the data, what about an ethernet LAN to get the data over?  If you want to archive the data, how do you store the second drive?  What are your plans for the first drive?  If the new software will not recognize the old file type, the data must be exported.  Just getting files to another hard drive will not finish your journey.
    As Allan said, knowing the exact model and year of your tower is important.  My suggestion is to find a user group near you.  Please post back with more information, including the name of a large city near you.
    For example, our user group just experimented with a 1983 Apple IIc that predates the Mac.  It started right up, read files from 1984  and saved them from a 5.25" floppy to a 3.5" floppy.  That 3.5 floppy will go into a platinum G3 which will read PRODOS files using Apple File Exchange.  That G3, with a USB card, will allow saving the files to a USB flash drive.  But, somewhere along the way, some software has to read the file and convert it to data that is useable by current software.
    Ji~m

  • I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Ado

    I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Adobe help me? Please?

    Use the Organizer backup & restore method, starting the restore from the TLY file. Probably best to use a custom location as the XP file structure will be different. See this link for further help:
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

    How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums.  Please help.

    You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
    If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

Maybe you are looking for