Need to new dep. key with zero %

Hi,
I need to create a new dep. key with 0% and i want to assign this dep. key to my asset.
Guide me
Srinivas

Hello,
Thanks for your quick reply
The thing is that we assigned wrong dep key to one asset. now we need to replace new dep. key
for that with 0%.
After assigment of new dep. to asset, i will recaclculate the depreciation for this year only.
My problem will got resolved.
I dont find any zero % dep.key in afama.
How to do , guide me
srinivas

Similar Messages

New transaction key with the posting key 24 and 34

Hi,
i want to create a new transaction key with the posting key 24 and 34.
the corresponding table is T030B.
but what is the Tcode/ IMG path to create it?
Regards,
Swetha

Hi,
Go to FBKP. Click on Automatic Postings.
Suppose you want to see the Exchange Rate diff. then click on it. You will see the transaction. Suppose KDB. Then double click on it. Now click on posting keys. The same will be defined in the table which is given by you.
Regards,
Jigar

Do I need a new product key for Crystal Reports XI Release 2?

Post Author: jerryk
CA Forum: .NET
Hi,
We have Crystal Reports XI and the associated product key. However, we have moved from .Net framework 2.0 and VS 2005. As a part of this upgrade we downloaded and installed Crystal Reports XI Release 2. It works fine in development mode, but when we try to install a web site with the CR XI Release 2 server it asks for a product key. When I enter the key we have it says the key is incorrect. Do we need a new key?
Thanks,
Jerry

Post Author: mewdied
CA Forum: .NET
No you do not need a different keycode. The original msi file that shipped with XI release 2 did not accept XI keycodes, the updated one available off the website will.http://support.businessobjects.com/downloads/merge_modules.asp#06
Make sure you use the one ending in 2005.

I need a new Delete key for my MacBook Pro

My daughter ripped my delete key off my MacBook Pro and I need a new one. Anyone know where to get one from and how much they would be? Thanks!

Do a Google search or call an Apple store or an AASP. Ask them about the cost.

Need a new wireless router with switching

I would like to purchase a new wireless router with 4 port switch. I have an Intel iMac with 2 pc's and have spent hours trying to configure my existing Linksys router to work properly and need to make a change. I have not been able to use iChat with Powerbook users and have had other problems as well and have given up...
The recommended router list on the iChat website does not specifically mention wireless routers with 4 port switching...
Does anyone have any suggestions for a router which is easy to use and configure?
Thanks,
cj

Hi Herpestes,
If you mean which method of opening the ports should you use for those computers it will be the UPnP setting found in the Adminstarion tab
Log on to the Linksys by typing 192.168.1.1 into a web browser
Type admin as User ID and Password.
Go to Administration
Enable UPnP
10:10 PM Wednesday; June 28, 2006

Need to add prefix Integer with zero's !

Hi
The length of the a number has to be 9 for if it is not then can any one suggest some code to prefix the incoming number with zero's to make it of length 9.
for example
number 1234 becomes 000001234

Convert it to string then check its length. add zeros times (9-current length). save again as string.
save it as string afterwards so when displayed will show all zeros as well but when to do calculations simpley Integer.parseInt it.
Hope it helps if you already have not worked it out.
AK

Do I need the original dongle key with logic pro 9

I have had Logic since version 7. I now have Logic Pro 9. Do I still need that dongle key in my computer to work in Logic 9.

Defintely keep it. I suffered a HD failiure recently and once I managed to restore to a new drive Logic asked me for the original XS key or the serial number of Logic 7 and then the serial number of Logic 9. I keep my XS key and the serial numbers of 7 and 8 in the box with 9.

I need a new product key for Windows 7. I have a HPG71 Notebook VR445AW

I need to reload Windows7 and I do not have the disc. The product key is faded and I cannot read it. What do I do?
This question was solved.
View Solution.

Hi,
Unfortunately neither HP or Microsoft will have any record of your Product Key - but you can order a set of Recovery Discs from HP.
Order HP Recovery Discs.
Using these discs to reinstall windows will not require you to enter a Product Key - activation will be automatic.
A guide on using Recovery Discs to reinstall Windows can be seen on the following link.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01867418#N720
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Establishing new shortcut keys WITH coordinate values

Hello,
I don't know if it's possible, but I am trying to make a shortcut key that will let me move a text box to a specific place. I have a bunch of text boxes on each page, and I want to move each one to a specific area. Going to the transform window and entering the X and Y coordinates is time consuming, so I would like to make shortcut keys I could use for the text boxes. I've looked at the shortcut keys and couldn't find a place where I could enter X and Y coordinates.
Unfortunately when I started out on this project, I didn't know much about InDesign and I disassociated all the text boxes from the master page (yup, went and did it over the course of 2 hours, boy do I regret that now!) otherwise I'd just move the boxes on the master page.
For example, I'd like to move a box from it's current position to
X: 23.44 mm
Y; 243.00 mm
Or, if there is an easier way to do this without using shortcut keys, I'd appreciate any help.

I still get an error message. I copied Gerald's script exactly as it appears above, and the error message says "bad argument move" line 2.
Sorry to not get this, but I really have no idea how the script Gerald gave me should appear. Should the entire thing be on one line, should the spaces appear exactly as he has them??? I copied and pasted it in just as it appears below - the same form as above:
for (n=0; n<app.selection.length; n++) {
app.selection[n].move([23.44, 100.05]);
Maybe there was some slight adjustment I should have made? Please bear with me, I want to get this right, sorry if I am missing something that everyone else already knows.
I was able to get the "helloworld" script from the tutorial to work, btw, so I know that there isn't some glitch keeping me from executing scripts.

Need Authorware News Update - Future with Adobe ? Next Version ? Etc

I've been away from Authorware for many months.
I'm sure these questions have been asked before but hopefully
someone will
be kind enough to give me a quick run down and update.
- Any word on Authorware's future since Adobe acquired it?
- What about the next version ? (if any)
- Should we ditch Authorware and try to go with something
else that is more
likely to be here down the road?
thanks for any comments.

Speaking of other tools...is there anything out there that
can actually
compete with Authorware and its vast custom possibilites? I
get occasional
management requests to see if any new tools can do what AW
can
better/faster/less overhead and so far nothing. AW is the
most powerful
media based programming tool I have ever run across. Most
other products
are just training template wizards.
Thx,
K
"Erik *ACE*" <[email protected]> wrote in
message
news:e4fvih$4d4$[email protected]..
>- Not official. Apparently there's some sort of beta
going on but no
>official word. Last year's TAAC indicated work is
progressing.
>
> - The next version would be 8, considering the most
recent version is 7
> ;-)
>
> - Sure, if you want to. Does it really matter? What does
Authorware not do
> now that prevents you from continuing to work with it?
What promise is
> there that whatever that problem is will be addressed
with the next
> release? What other tool would you move to?
> Erik
>
> tmb wrote:
>> I've been away from Authorware for many months.
>>
>> I'm sure these questions have been asked before but
hopefully someone
>> will be kind enough to give me a quick run down and
update.
>>
>> - Any word on Authorware's future since Adobe
acquired it?
>> - What about the next version ? (if any)
>> - Should we ditch Authorware and try to go with
something else that is
>> more likely to be here down the road?
>>
>> thanks for any comments.
>>
>>
>>
>
> --
> Erik Lord
>
http://www.capemedia.net
> Adobe Community Expert - Authorware
>
http://www.macromedia.com/support/forums/team_macromedia/
>
>
http://www.awaretips.net -
samples, tips, products, faqs, and links!
> *Search the A'ware newsgroup archives*
>
http://groups.google.com/groups?q=macromedia.authorware
> *The Blankenship Caveat: Note that direct linking to
http content
> through any Authorware icon will likely fail if a proxy
server is
> present!*

Hi I need a new nokia phone with the following req...

Hi can someone please tell me which Nokia phones have the following spec
I need to tex and email and also use a SD memory card slot to view excel and word
documents.
Thanks for your time
rgds
phil123

Hi psychomania
Thanks very much for the info
rgds
phil123

Cube compression WITH zero elimination option

We have tested turning on the switch to perform "zero elimination" when a cube is compressed. We have tested this with an older cube with lots of data in E table already, and also a new cube with the first compression. In both cases, at the oracle level we still found records where all of the key figures = zero. To us, this option did not seem to work. What are we missing? We are on Oracle 9.2.0.7.0 and BW 3.5 SP 17
Thanks, Peggy

Haven't looked at ZERO Elimination in detail in the latest releases to see if there have been changes, but here's my understanding based on the last time I dug into it -
When you run compression with zero elimination, the process first excluded any individual F fact table rows with all KFs = 0, then if any of the summarized F fact table rows had all KF = 0, that row was excluded ( you could have two facts with amounts that net to 0 in the same request or different requests where all other Dims IDs are equal) and not written to the E fact table. Then if an E fact table row was updated as a result of a new F fact table row being being merged in, the process checked to see if the updated row had all KF values = 0, and if so, deleted that updated row from the E fact table.
I don't beleive the compression process has ever gone thru and read all existing E fact table rows and deleted ones where all KFs = 0.
Hope that made sense. We use Oracle, and it is possible that SAP has done some things differently on different DBs. Its also possible, that the fiddling SAP had done over that last few years trying to use Oracle's MERGE functionality at different SP levels comes into play.
Suggestions -
I'm assuming that teh E fact table holds a significant percentage of rows have all KFs = 0. If it doesn't, it's not worth pursuing.
Contact SAP, perhaps they have a standalone pgm that deletes E fact table rows where all KFs = 0. It could be a nice tool to have.
If they don't have one, consider writing your own pgm that deletes the rows in question. You'll need to keep downstream impacts in mind, e.g. aggregates (would need to be refilled - probably not a big deal), and InfoProviders that receive data from this cube.
Another option would be to clone the cube, datamart the data to the new cube. Once in the new cube, compress with zero elimination - this should get rid of all your 0 KF rows. Then delete the contents of the original cube and datamart the cloned cube data back to the original cube.
You might be able to accomplish this same process by datamarting the orig cube's data to itself which might save some hoop jumping. Then you would have to run a selective deletion to get rid of the orig data, or perhaps if the datamarted data went thru the PSA, you could just delete all the orig data from the cube, then load datamarted data from the PSA. Once the new request is loaded, compress with zero elimination.
Now if you happen to have built all your reporting on the this cube to be from a MultiProvider on teh cube rather than directly form the this cube, you could just create anew cube, export the data to it, then swap the old and new cubes in the MultiProvider. This is one of the benefits of always using a MultiProvider on top of a cube for reporting (an SAP and consultant recommended practice) - you can literally swap underlying cubes with no impact to the user base.

Delete batches with zero stock from dropdown list

Hi All,
I have a requirement on batch stock materials.The exist program displaying multiple batches for material plant with stock and without stock in the drop down list for MCH1 table in the pop up window.
Now i would need to delete the batches with zero stock from drop down list.I could find the data for stock and non stock from MCHB table .
Any idea how to delete the entry of non stock batches from drop down list
Regards,
Reddy

Hi All,
The logic has already been implemented to for drop down list for all batches(with or without stock) for material plant.the follwing code has been written for the same.
Any idea how to delete the entry for non stck baches from the drop down list.
this is the code
SET PARAMETER ID 'MAT' FIELD help_lips-matnr.
   SET PARAMETER ID 'WRK' FIELD help_lips-werks.
Export parameters to memory to enable search help via classes
   CLEAR dseltab.
   REFRESH dseltab.
   dseltab-fldname = 'MANDT'.
   MOVE sy-mandt TO dseltab-fldinh.
   APPEND dseltab.
   dseltab-fldname = 'MATNR'.
   MOVE help_lips-matnr TO dseltab-fldinh.
   APPEND dseltab.
   dseltab-fldname = 'WERKS'.
   MOVE help_lips-werks TO dseltab-fldinh.
   APPEND dseltab.
   dseltab-fldname = 'CHARG'.
   MOVE help_lips-charg TO dseltab-fldinh.
   APPEND dseltab.
   EXPORT dseltab TO MEMORY ID 'DSELTAB'.
Get description for search help
   mc_object = 'MCH1'.
   lf_shlpname = mc_object.
   CALL FUNCTION 'F4IF_GET_SHLP_DESCR'
     EXPORTING
       shlpname = lf_shlpname
       shlptype = 'SH'
     IMPORTING
       shlp     = lx_shlp
     EXCEPTIONS
       OTHERS   = 1.
Enable value copy from search help to dynpro field
   READ TABLE lx_shlp-interface INTO ls_interface
                                WITH KEY shlpfield = 'CHARG'.
   ls_interface-valfield = 'X'.
   MODIFY lx_shlp-interface FROM ls_interface INDEX sy-tabix.
Start search help dialog
   CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
     EXPORTING
       shlp          = lx_shlp
     TABLES
       return_values = lt_retvalues
     EXCEPTIONS
       OTHERS        = 1.
   IF sy-subrc EQ 0.
     READ TABLE lt_retvalues INTO ls_retvalue
                             WITH KEY fieldname = 'CHARG'.
     IF sy-subrc EQ 0.
       lips-charg = ls_retvalue-fieldval.
       gs_lips-charg = ls_retvalue-fieldval.
     ENDIF.
   ENDIF.
Regards
Reddy

Duplicate Hardware Key when tried to request for new license key

Dear Experts,
Our SAP ECC6 license key is going expire in these few days. Therefore, I tried to request for new license key with the same Hardware key at SAP Support Portal, but it showed "Duplicate Hardware Key".
Should I wait for the current one to expire before I could request for new one?
Regards,
Abraham

Hi Nick,
It's not a temporary license.
It just when I tried to get a new license key 1 week ago, the installation number we had was just licensed for MaxDB as database server, therefore, it only gave 2 weeks validity of license key.
Now, we have changed our contract licensed to MS-SQL server.
Therefore, I need to get the new license key based on MS-SQL server. Since, I didn't do any reformating on the server, thus, the hardware key is still the same when I tried to get the new license key.
What should I do?
Regards,
Abraham

How cna I deactivate multiple CS products and get new activation keys for them?

I need to know how to deactivate all active installs of a given CS product and serial #, then get new activation keys for the same product. I realize this is a question only an Adobe rep can answer, but online chat is closed and the phone support line is completely useless, so I have to ask here.
-- Jon W.

you'll need to contact adobe support to reset your activation count for each product if you are unable to do that yourself, http://helpx.adobe.com/x-productkb/global/service1.html
you will not get or need a new activation key. your original one will still work for cs3 and later.

Need to new dep. key with zero %

Similar Messages

Maybe you are looking for