Need to open a case for Windows Server 2008

Hi,
I'm new to this forum and my first impression is that it is "not friendly" :(
I'm looking for a section where to post a Windows Server issue, but there is not a topic for that. Where could I post it?
Thanks
Max

When you state that the forum is not friendly I hope you mean the layout etc, as I think that people who give up their own time to help others are most friendly.
You could try the Windows Server section?
Kind regards, Kev

Similar Messages

  • Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

    We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
    We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
    Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same? 

    Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
    for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
    For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
    CAL licensing method).
    (whether you use per-Device, or per-User, is up to you, it comes down to cost).
    CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
    If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
    If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
    CALs can be tricky to correctly license.
    Here's some introductory reading:
    http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
    And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
    Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
    don't physically do anything with them to own/drive a car.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Management Pack for Windows Server 2008 Enterprise SP1

    Hello,
    I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
    I have installed the normal management packs:
    On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
    What can I do?

    Hi Journey Tinoco,
    Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
    counter you want to monitor on windows server 2008 servers VIA SCOM.
    Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
    The one which you are opened is the health explorer view which is not showing much details.
    Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
    Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
    the Run button on the left to you will get the report as below.
    Please note: If the below report is what you are looking for is not available in your SCOM's  reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
    it from the below link.
    http://www.microsoft.com/en-in/download/details.aspx?id=9296
    Hope this helps you.
    Gautam.75801

  • Error on clone database, oracle 10g release 2 for windows server 2008

    Hi,
    OS: Windows Server 2008 X64
    Oracle: oracle 10g release r2 for windows server 2008
    An error occurred when creating a database, stop at last step, Screenshot:
    [http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
    the trace log content:
    [main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
    [main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
    [main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
    [main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
    [main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
    [main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
    [main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
    [main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
    [main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
    [main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
    [main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
    [main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
    [main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
    [main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
    [main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
    [main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
    [main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
    [main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
    [main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
    [main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
    [main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
    [main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
    [main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
    [main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
    [main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
    [main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
    [main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
    [main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
    [main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
    [main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
    [Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
    [Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
    [Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
    [Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
    [Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
    [Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
    [Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
    [Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.ora

    Check your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
    ORA-28547 : Connection to server failed, probable Net8 admin error
    thanks
    http://swervedba.wordpress.com/

  • Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

    Hi!
    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
    Thanks...

    I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

  • Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008

    Hi,
    I am a little confused because I have Windows Server 2008 64 bit operating system and had installed Oracle 11g 11.1.0.6.0 (x64) prior to the Oracle 11g 11.1.0.7.0 for Windows Server 2008 install package becoming available.
    My database needs no backup of data as it is a fresh installation so its removal is not a problem.
    To now upgrade to Oracle 11g 11.1.0.7.0 for Windows Server 2008 do I need to
    a) Uninstall Oracle 11.1.0.6.0 (x64) and then install Oracle 11.1.0.7.0 on Windows Server 2008
    or
    b) Apply patch 6890831 (will this upgrade from 11.1.0.6.0 x64 to 11.1.0.7.0 for Windows Server 2008?)
    Any help much appreciated as having looked at documentation I am still confused what I need to do.
    Thanks.

    Duplicate post
    Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008
    Please continue with other thread.

  • How to download oracle patch set 10.2.0.5  for Windows server 2008 R2

    I need  download and install oracle patch set 10.2.0.5 and install  for Windows server 2008 R2 (notes 1486772).
    But I  get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
    Help me, please!

    Hi,
    Have you looked at this location https://service.sap.com/oracle-download ?
    Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
    Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
    Regards,
    Bhavik G. Shroff

  • What are the netsh cmd line for windows server 2008,2012 ?

    Hi
        I am try to config ip,subnet,gateway,preferred and secondary dns using netsh for windows server 2008,2012,
    Before Netsh cmd support for all os including Win 8,win 8.1.
    I need to config form client machine to server machine using netsh cmd lines,i will try in remote login also like i will give server name,username and password with netsh cmd.Below is sample cmd line,using process i will change ip config.
    netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1
    when i run in windows server using cmd prompt it show error like "some commands line not found in specified file"
    This is my code in asp.net using vb
     Dim pip As New Process()
            Dim pipa As New ProcessStartInfo("netsh -r Admin-pc -u admin-pc\administrator -p XXXXX interface ip set address name="Local Area Connection" Static 192.168.0.60 255.255.255.0 192.168.0.1")
            pip.StartInfo = pipa
            pip.StartInfo.UseShellExecute = False
            pip.StartInfo.RedirectStandardOutput = True
            pip.Start()
            pip.WaitForExit()
    And if change  ip,subnet and default gateway,internet not work,if i change preferred and secondary dns then only internet work and can browse.
    I can change ip,subnet,gateway,both dns is some other way,below is the link
    http://www.codeproject.com/Questions/795642/How-to-change-IP-Subnet-Gateway-DNS-Prefers-and-al?arn=0
    but what problem is if server is logoff,changes not reflect in server machine,may be it logoff.
    So i need is if server is logoff,need to change ip,subnet,gateway and both dns using netsh or some other vb codings in asp,net.I am try to change ip address form client machine also.
    Pls reply asap
     Regards
         Aravind 

    For the shell scripting I'd try them here.
    Scripting forum on MSDN
    Scripting Guys forum on TechNet
    For the asp.net I'd ask over here.
    Microsoft ASP.Net forums
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Issue Installing SP2 for Windows Server 2008 SP1

    Hello, I have a very annoying issue, and I hope someone can help a bro out.
    Server: Windows Server 2008 SP1 64-bit
    Issue: SP2 wont install on Windows Server 2008 SP1
    This is what I am seeing when I check the event viewer:
    1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
    2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
    I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated. 
    What I have done so far:
    I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
    in the system.
    Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
    (Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
    Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
    ~I will provide any further info if needed.

    Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
    so I wasnt for shore what relevant data pertained to this issue):
    I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
    CBS failed. However, I have no clue where to go after that..
    WindowsUpdate.log:
    2015-02-22 19:24:15:093
    940 d10
    AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
    2015-02-22 19:24:15:093
    940 d10
    AU Setting AU scheduled install time to 2015-02-23 08:00:00
    2015-02-22 19:24:15:106
    940 1538
    DnldMgr *************
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr *********
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2015-02-22 19:24:15:107
    940 1538
    DnldMgr  * Updates to download = 1
    2015-02-22 19:24:15:107
    940 1538
    Agent  *   Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
    2015-02-22 19:24:15:108
    940 1538
    Agent  *   UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
    2015-02-22 19:24:15:108
    940 1538
    Agent  *     Bundles 2 updates:
    2015-02-22 19:24:15:108
    940 1538
    Agent  *       {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
    2015-02-22 19:24:15:108
    940 1538
    Agent  *       {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
    2015-02-22 19:24:15:108
    940 1538
    DnldMgr ***********  DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}]  ***********
    2015-02-22 19:24:15:108
    940 1538
    DnldMgr Contacting regulation server for 2 updates.
    2015-02-22 19:24:15:109
    940 1538
    Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2015-02-22 19:24:15:119
    940 1538
    Misc Microsoft signed: Yes
    2015-02-22 19:24:15:123
    940 1538
    Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2015-02-22 19:24:15:131
    940 1538
    Misc Microsoft signed: Yes
    2015-02-22 19:24:15:134
    940 1538
    DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
    2015-02-22 19:24:15:135
    940 d10
    AU  # Pending download calls = 1
    2015-02-22 19:24:15:135
    940 d10
    AU <<## SUBMITTED ## AU: Download updates
    2015-02-22 19:24:15:644
    940 1538
    DnldMgr  * Regulation call complete. 0x00000000
    2015-02-22 19:24:15:661
    940 1538
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107]  ***********
    2015-02-22 19:24:15:732
    940 1538
    DnldMgr  * All files for update were already downloaded and are valid.
    2015-02-22 19:24:15:732
    940 1538
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107]  ***********
    2015-02-22 19:24:15:733
    940 1538
    DnldMgr  * Queueing update for download handler request generation.
    2015-02-22 19:24:15:733
    940 1538
    DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
    2015-02-22 19:24:16:095
    940 1538
    Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
    2015-02-22 19:24:16:095
    940 1538
    Handler Selected payload type is ptExpress
    2015-02-22 19:24:16:124
    940 1538
    Handler UH: DpxRestoreJob returned 0x80070002
    2015-02-22 19:24:16:124
    940 1538
    Handler Detected download state is dsHavePackage
    2015-02-22 19:25:32:077
    940 dcc
    AU AU received policy change subscription event
    2015-02-22 19:26:21:898
    940 d40
    Handler FATAL: CBS called Error with 0x80070002, 
    2015-02-22 19:26:21:899
    940 1538
    Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
    2015-02-22 19:26:21:909
    940 1538
    Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0 
    2015-02-22 19:26:21:909
    940 1538
    Handler FATAL: Error source is 106.
    2015-02-22 19:26:21:909
    940 1538
    DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
    2015-02-22 19:26:21:909
    940 1538
    DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
    2015-02-22 19:26:35:006
    940 1538
    Agent *********
    2015-02-22 19:26:35:006
    940 d10
    AU >>##  RESUMED  ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
    2015-02-22 19:26:35:007
    940 1538
    Agent **  END  **  Agent: Downloading updates [CallerId = AutomaticUpdates]
    2015-02-22 19:26:35:007
    940 d10
    AU  # WARNING: Download failed, error = 0x80070002
    2015-02-22 19:26:35:007
    940 1538
    Agent *************
    2015-02-22 19:26:35:007
    940 d10
    AU #########
    2015-02-22 19:26:35:007
    940 1538
    Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
    2015-02-22 19:24:15:004-0500 1
    147 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Software Synchronization
    Windows Update Client successfully detected 2 updates.
    2015-02-22 19:26:35:008
    940 d10
    AU ##  END  ##  AU: Download updates
    2015-02-22 19:26:35:008
    940 d10
    AU #############
    2015-02-22 19:26:35:008
    940 d10
    AU Setting AU scheduled install time to 2015-02-23 08:00:00
    2015-02-22 19:26:35:008
    940 1538
    Report CWERReporter finishing event handling. (00000000)
    2015-02-22 19:26:35:009
    940 1538
    Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
    2015-02-22 19:26:22:129-0500 1
    161 106
    {D0ABB478-FFD1-448A-9058-939C0B427AD4}
    107 80070002
    AutomaticUpdates Failure
    Content Download Error: Download failed.
    2015-02-22 19:26:35:181
    940 1538
    Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2015-02-22 19:26:35:181
    940 1538
    Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
    2015-02-22 19:26:35:182
    940 1538
    Report CWERReporter finishing event handling. (00000000)
    2015-02-22 19:26:40:009
    940 1538
    Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
    2015-02-22 19:26:35:009-0500 1
    188 102
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Content Install
    Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on ‎Monday, ‎February ‎23, ‎2015 at 3:00 AM:  - Security Update for Windows Server 2008 x64 Edition
    (KB2507618)
    2015-02-22 19:26:40:009
    940 1538
    Report CWERReporter finishing event handling. (00000000)

  • Required weblogic 10.3.5 instllable for windows server 2008(64bit)

    Hi,
    I have been trying to find the weblogic server(10.3.5), CO(13.4), BO(13.4) and POS(13.4) installable for Windows server 2008(64bit) but am unable to find them in e-delivery or anywhere else on Oracle website.
    Can anyone please provide me the link for these software downloads.
    Thanks.

    Hi
    On this below link, look for older versions of Weblogic Server which is at the bottom of the page. Expand for WLS 10.3.5. You need Weblogic Server + Coherence package installer. Download the generic jar installer.
    http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
    See this below post for more details:
    Re: Why So Difficult To Find WebLogic Server 10.xx for Windows 7 64-bit??
    Thanks
    Ravi Jegga

  • StoreVault Manager for Windows Server 2008 R2

    There is this software for Windows Server 2008?I need to keep one Windows Server 2003 just to have this software installed.Any one knows any procedure for that?Best RegardsRobson

    I know this post is older then dirt but am running into this issue as well after raising the functional level to 2008. If you are still out there were you successful with doing this as I tried and am still not able to access. Wondering if i'm missing something. Has anyone else heard of a way around this? Thanks!

  • Internet Explorer 10 for Windows Server 2008 R2

    I need to install IE 9 or IE 10 on a Windows Server 2008 R2.  IE 9 or 10 is specified because of compatibility with some of our applications that have been developed in house.
    An earlier post listed the link
    http://download.microsoft.com/download/8/A/C/8AC7C482-BC74-492E-B978-7ED04900CEDE/IE10-Windows6.1-x86-en-us.exe  as a source for the IE 10 download, but when I downloaded it and tried to install it, I got an error "Operating System is not supported".
    I am hesitant to download it from one of the non-microsoft sites that offer it.
    Is there a way to download and install IE 10 to Windows Server 2008 R2?
    Thanks very much for your help.

    Hello Logan,
    Unfortunately, I did not find any download link of IE 9 or 10 from Microsoft's server. I think they are closing IE 10 or below versions for their OS.
    However, I found an external link to download IE 10, if you want then visit:-
    https://cyrusbesharat.wordpress.com/2013/02/27/download-ie-10-final-version-for-windows-server-2008-r2/
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Merge Module for Windows Server 2008

    Hallo,
    I made a project with C# in VS 2005, and when I ran this project on a XP machine where no VS 2005 was installed, I needed to make a Setup-Project with a CrystalReportsRedist2005_x86.msm on this machine.
    Now I want to run this project on a Windows Server 2008, and this Setup-Project can´t be run on Win Server 2008.
    Is there an other Mergemodule for Windows Server 2008?
    Every thing runs exept Crystal Reports!
    Can somebody help me please???

    it was just a beginner mistake, i just had to convert the VS 2005 Project into VS 2008 Project, and install the runtime on the target machine (CRRedist2008_x86.msi). and that´s it!
    it was not possible with the Merge Module.
    at first I tried to do it with CrystalReportsRedist2005_x86.msm on a Windows 2008 Server.

  • Require list of all events for Windows Server 2008 Active Directory

    Hi all,
    I require list of all events for Windows Server 2008 Active Directory. Event Log name for Active Directory log is "Directory Service".
    Regards,
    SR

    Hi,
    Thanks for your posting.
    Do you mean you want to list all Active Directory logs into one file named “Directory Services”?
    If that, it’s hard to achieve. There are kinds of Active Directory logs stored in different locations and they have different file formats. It’s hard
    to collect them into one file.
    Active directory records events in the directory services log in Event Viewer. By default, Active Directory records only critical error events. To instruct Active
    Directory to record other events in the directory services log, we need to modify registry.
    For more information please refer to following MS articles:
    Active Directory Diagnostic Logging
    http://technet.microsoft.com/en-us/library/cc961809.aspx
    How to configure Active Directory diagnostic event log
    http://support.microsoft.com/kb/314980
    Lawrence
    TechNet Community Support

  • Where can I download the Crystal Run Time for Windows Server 2008 64 bit ?

    Hi,
    Where can I download the Crystal Reports 08 RunTime for Windows Server 2008 64 bit ?
    Rock
    Edited by: Rock_1234 on Aug 5, 2009 9:25 AM

    Thanks all for your replys.
    As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
    Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
    ' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
    When will be 64 bit runtimes for CR 08 will be available?
    Thanks

Maybe you are looking for