Need to open a new mail

I have a JSP which contains an email icon. On clicking the icon, a new mail should open either in Microsoft Outlook or Netscape Navigator, depending on whichever has been configured. The mail should contain an HTML attachment of the page from which the icon was clicked. The user would then type in the receipient's address and send the mail.
Any pointers ??

I have a JSP which contains an email icon. On clicking
the icon, a new mail should open either in Microsoft
Outlook or Netscape Navigator, depending on whichever
has been configured.Guess this can be done thru mail-to: tag.
The mail should contain an HTML
attachment of the page from which the icon was
clicked. The user would then type in the receipient's
address and send the mail.
Any pointers ??

Similar Messages

  • TS3276 cannot send open a new mail window. hear a small beep

    it will not let me open a new mail screen. The mail is working (all green dots) I just hear a faint beep.....please help!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Click the Clear Display icon in the toolbar. Try the action again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I can't open or save a file if illustrator needs to open a new window to do so.

    Hardware Overview:
      Model Name:          iMac
      Model Identifier:          iMac13,2
      Processor Name:          Intel Core i5
      Processor Speed:          3.2 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          8 GB
      Boot ROM Version:          IM131.010A.B05
      SMC Version (system):          2.11f16
      Serial Number (system):          C02L609MDNCW
      Hardware UUID:          25D8B2EA-C39C-5B82-82F6-BC2A34DB1EEC
    I need to save a file as a PDF but when Illustrator needs to open a new window (ie, when I have to select the location the file is saved to) the window opens for a split second before disappearing. It is the same when trying to open a file or any time Illustrator needs to open a new window. The window appears for a split second then vanishes. From what I've tried, it is only Illustrator doing it. Photoshop displays this error: "Could not complete your request because of a program error." when I first try and open a file but will only do it the first time and then it works ok. Indesign is working fine.
    I've tried re-installing Illustrator and Photoshop, restarting my computer but the issue is still there. Is there anything else I can do myself or is there a chance it is an issue with my computer?

    I am also having this problem.  The issue appears with both my rMacBook pro as well as my 2012 imac.  Very frustrating. 

  • Open a new mail item in Lotus notes with all names from table view..

    HI
    the requirement is like this .. There is a table view with checkboxes..
    Now user will select the particular checkboxes and one mail should be created in Lotus Notes with all the user ids selected.
    How do i achieve
    1) Selecttion of either all ( Select ALl/deselect all ) or some users funtionality in table view
    2) Opening a new mail item with all users selected.

    Hi Raja
    The problem is this
    I have 2 buttons mail to Selected  and mail to all .
              <htmlb:button id            = "b_mailtosel"
                            text          = "Mail to Selected"
                            onClick = "onInputProcessing(b_mailtosel)" />
              <htmlb:button id            = "b_mailtoall"
                            text          = "Mail to all"
                            onClick = "onInputProcessing(b_mailtoall)" />
    Table view below is having this value..
    <htmlb:tableView id             = "tab1_list"
                          table          = "<%= i_list %>"
                           footerVisible  = "false"
                           selectionMode = "MULTISELECT"
                           design          = "ALTERNATING"
                           emptyTableText = "No data available"
                           width          = "100%"
                            >
    OninPut processing
    WHEN 'b_mailtosel'.
          application->s_flag = '1'.
          l_tv ?= cl_htmlb_manager=>get_data( request = request
                                               name    = 'tableView'
                                               id      = 'tab1_list' ).
          IF NOT l_tv IS INITIAL.
            table_event = l_tv->data.
            IF NOT table_event->PREVSELECTEDROWINDEXTABLE IS INITIAL.
            i_selected_mail = table_event->PREVSELECTEDROWKEYTABLE.
            ENDIF.
          ENDIF.
    table_event->PREVSELECTEDROWKEYTABLE is blank since there is no key column defined in the Tableview  ( since this combination doesnt work with select all ) .
        WHEN 'b_mailtoall'.
        cl_htmlb_manager=>check_tableview_all_rows(
          rowcount = rowcount
          request = request
          id = 'tab1_list'
          check = 'X'
          application->s_flag = '1'.
          l_tv1 ?= cl_htmlb_manager=>get_data( request = request
                                               name    = 'tableView'
                                               id      = 'tab1_list' ).
          IF NOT l_tv1 IS INITIAL.
            table_event1 = l_tv1->data.
            IF NOT table_event1->PREVSELECTEDROWINDEXTABLE IS INITIAL.
            i_selected_mail = table_event1->PREVSELECTEDROWKEYTABLE.
            ENDIF.
          ENDIF.
    NO DATA is coming in Select all too..
    HOw do i frame my code to atleast get the values...

  • Whenever I access my Hotmail inbox to open a new mail it starts reloading the mail after every second unless i switch it to full view?

    whenever I access my Hotmail inbox to open a new mail it starts reloading the mail after every second unless i switch it to full view. Kindly help me to solve this continuous problem.

    I confirm this is a known bug and Microsoft are working on a fix. They plan to fix this before Firefox 4 reaches release candidate phase.
    A workaround is to change a preference in Firefox:
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''html5.enable''' and double-click on it to change its value to '''false'''
    If you do this, remember to set the preference back to true by double-clicking on it again when Firefox 4 release candidate is made available, the bug should be fixed by then.

  • Need to add a new mail account but option is greyed out

    Hi, I need to add a new mail account (I already have 2 setup), but when I go to Settings > Mail, Contacts, Calendars, the "Add Account" field is not available for me to click on.

    Fixed it... was a Restrcition setting that I obviously turned on after I had set the other two accounts up... Doh

  • I already have an iTunes account but need to open a new one as I have many apple products but am limited to how many I can use my iTunes account on. How do I open a new one please. Thanks

    Hi I already have an itunes account registered to my address and email address.
    The problem is, I have many apple products but i'm limited to how many products I can use one itunes account for.
    How do I open a new itunes account for the same address please.
    Thanks for your help.
    Sam

    Well, you can probably do it, but then you also have to buy the products again to use them from the other account since they cannot be transferred or shared between accounts.  So if you have 7 computers and want the same movie authorized on all of them, you'll have to buy the movie twice and then authorize some devices on one account and others on the other.
    Do you really have >5 devices, or is it just that you have a lot of devices authorized that no longer exist but are tying up authorization slots?  If that's the case, you can deauthorize things.
    iTunes Store: About authorization and deauthorization - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050
    I have no idea how to do multiple accounts but you may need to create a new e-mail address (plenty of free ones out there).

  • Why does pages 09 keep opening a new mail message

    I'm using pages 09 now (was using 08; tried the new 5.0 but it is useless based on backward compatability)
    When I click on a name in a document it immediately opens a new email message with To as the contact  I clicked on. I've tried turning off all the auto complete, etc I can find but it still happens.
    Specifically,
    if I go to the footer, the next time I land on a name in the body of the document it opens up a new email.
    Once I close the mail message I can continue typing, editing etc.; but the moment I go to the footer and then return to the text box it jumps to a new mail message when I click on a name.
    How do I turn this off?
    George O.

    More on this and a correction-
    there is a part of this document outined in blue- whenever I go into this part from the footer it initiates an email to me;  it doesn't matter where I click. My earlier question said when I click on a name this happens; but actually anywhere in the outlined area.
    some of the document does not have thin blue outlines; when I go there I'm ok- no new email.
    so, what are the blue lines about?
    and why does it send me an email when I move into the outlined area?
    thanks for any help !
    george

  • How to change cursor when need to open a new dialog?

    Hi,
    I try to change cursor to WAIT when client open a new dialog, which it tell user the program was running to ready display new dialog.
    My code was like the following
    scene.setCursor(Cursor.WAIT);
    someclass.showMyDialog(); // The dialog was a new stage with StageStyle.UTILITY style
    scene.setCursor(Cursor.DEFAULT);
    But the cursor didn't be changed, I didn't know it why? Anybody know it? thank in advance!
    I had search the google, and didn't find the perfect answer, most of they was like to use setCursor(Cursor.WAIT) mode.
    the current ENV in my host was: windows 7 and Java
    java version "1.7.0_13"
    Java(TM) SE Runtime Environment (build 1.7.0_13-b20)
    Java HotSpot(TM) 64-Bit Server VM (build 23.7-b01, mixed mode)
    Best regards,
    Edited by: user13005878 on May 27, 2013 1:48 AM

    If you have a long running process ("long" means anything the user will notice), you need to run it in a thread other than the JavaFX Application Thread. In other words, you need to change the cursor to the wait cursor on the FX Application Thread, launch a user-defined thread for your long running process (connecting to the database), and once that thread is complete, show the dialog and change the cursor back on the FX Application Thread again. If you try to do everything on the FX Application Thread, you'll likely block that thread and prevent any changes from being visible to the user until the long process is complete (so you'll never see the wait cursor).
    All that said, and as jsmith said, there are some bugs in JavaFX 2.2 with the appearance of the cursor. So on my system (Mac OS X 10.7.5) the "correct" behavior is only observed with JavaFX 8.
    This is an example of doing things wrong. Here I don't see any change to the cursor, even on JavaFX 8:
    import javafx.application.Application;
    import javafx.event.ActionEvent;
    import javafx.event.EventHandler;
    import javafx.scene.Cursor;
    import javafx.scene.Scene;
    import javafx.scene.control.Button;
    import javafx.scene.layout.BorderPane;
    import javafx.stage.Stage;
    public class WaitCursorDemo extends Application {
      @Override
      public void start(Stage primaryStage) {
        final BorderPane root = new BorderPane();
        final Scene scene = new Scene(root, 600, 400);
        Button button = new Button("Do something time-consuming");
        button.setOnAction(new EventHandler<ActionEvent>() {
          @Override
          public void handle(ActionEvent event) {
            System.out.println("Starting...");
            scene.setCursor(Cursor.WAIT);
            try {
              Thread.sleep(2000);
            } catch (InterruptedException exc) {
              exc.printStackTrace();
            scene.setCursor(Cursor.DEFAULT);
            System.out.println("Done");
        root.setBottom(button);
        primaryStage.setScene(scene);
        primaryStage.show();
      public static void main(String[] args) {
        launch(args);
    }This works on JavaFX 8: after pressing the button I see the wait cursor for two seconds, then it reverts to the default cursor.
    import javafx.application.Application;
    import javafx.concurrent.Task;
    import javafx.concurrent.WorkerStateEvent;
    import javafx.event.ActionEvent;
    import javafx.event.EventHandler;
    import javafx.scene.Cursor;
    import javafx.scene.Scene;
    import javafx.scene.control.Button;
    import javafx.scene.layout.BorderPane;
    import javafx.stage.Stage;
    public class WaitCursorDemo extends Application {
      @Override
      public void start(Stage primaryStage) {
        final BorderPane root = new BorderPane();
        final Scene scene = new Scene(root, 600, 400);
        Button button = new Button("Do something time-consuming");
        button.setOnAction(new EventHandler<ActionEvent>() {
          @Override
          public void handle(ActionEvent event) {
            System.out.println("Starting...");
            scene.setCursor(Cursor.WAIT);
            Task<Void> task = new Task<Void>() {
              @Override
              protected Void call() throws Exception {
                try {
                  Thread.sleep(2000);
                } catch (InterruptedException exc) {
                  exc.printStackTrace();
                return null;
            task.setOnSucceeded(new EventHandler<WorkerStateEvent>() {
              @Override
              public void handle(WorkerStateEvent event) {
                scene.setCursor(Cursor.DEFAULT);
                System.out.println("Done");
                // Display your dialog now you have the data from the database...
            new Thread(task).start();
        root.setBottom(button);
        primaryStage.setScene(scene);
        primaryStage.show();
      public static void main(String[] args) {
        launch(args);
    }

  • External user needs to open CRES e-mails in bulk, options?

    What would the options be for an external user to open CRES e-mails in bulk?
    My first thought is they could install the Outlook plug-in, but they would not be able to reply securly without the plug-in being configured for Encryption.
    Appreciate any thoughts,

    If you want to simplify the opening of multiple CRES messages then there are a couple of options:
    1 - If they have Outlook then the Outlook plug-in is one solution.  One issue here is although it is "free" you need a Cisco id with an associated service contract to be able to download the plug-in.   Also as you have noted you need to be configured for encryption to reply within Outlook, but you can still use the secure reply option if you open the CRES envelope "normally" (in a browser). 
    2 - If you send them envelopes with medium security then the recipient can "remember" their password in a secure cookie so they entry their password once and then for subsequent envelopes they just click open button.  No plug-in is required and any email client can be used.  You can set medium security / sensitivity in the encryption profile or in an x-header.
    3 - If you send them envelopes with low security (sometimes called "no-authentication") then no password is required and the envelope just opens by clicking the acknowledge button (which replaces the open button).  The downside of this is that there is no authentication so the message is encrypted but anyone can open it.  Depends on your security requirements as to whether this is acceptable.
    In my opinion option 2 would be the best and certainly easiest to implement.

  • Opening a new mail window takes 5 seconds to appear

    When I click New Mail it takes 4 seconds to appear for this Window. This is already for many months. I have a .Mac account and three other POP accounts and a fresh other user doesn't have this problem. I might trash some prefs, but I don't want to organize my whole E-mail again. Somebody some clue what to do?

    Go to Apple Menu > System Preferences > Network > Show: Network Port Configurations. Make sure that the configuration used to connect to Internet is at the top of the list. Also, disable any communications/networking configuration enabled, but not in use. Since you don't experience the problem when logged in as another user, this probably won't solve it, but it's worth looking at anyway.
    Now, in Mail go to Mail > Preferences > Accounts > Mailbox Behaviors for your .Mac account. Do you have Store draft messages on the server enabled? If so, disable it and see whether it makes a difference.

  • Need to Open a new Window through Oracle Function

    Hi all ,
    I have created an Oracle Function say Func1 and tagged it to a menu of HTML TAB Type .
    The function is working fine . However , i have a requirement.Whenever i click on the Func1 Tab , the function should open in a new window .
    The Web_Html Call of the function is a call to a HTML Page.
    I want the HTML page to open in a new window
    Kindly advise how to do the same
    Thanks
    Chirag

    The server cannot affect windows on the client machine.
    All a server sees is a request, to which it sends a response.
    What the client does with that response is up to it.
    Simplest way is in viewresult.jsp set the target of the form to be "_blank"
    This tells it to open the results of the request into a new window.
    You can't decide at the server side whether to remain on the same page, or open a new window. You have to make that decision when you submit the page - not on the results of that submission.

  • I no longer have tabs on the window - if I want to go anywhere I need to open a new window

    everything is gone that I used before - cannot open anything in a new tab - I need to go to an empty tab - type or find bookmark and open in a new window - everything is messes up

    {Ctrl + Click} doesn't open a hyperlink in a new tab? <br />
    Do you have that problem in the Firefox SafeMode? <br />
    http://support.mozilla.com/en-US/kb/Safe+Mode

  • Need MP3 open in new browser window - Think I solved it... come on no one knows????? are u kidding me??

    <script>
    window.resizeTo(350, 500);
    </script>
    that is what I did
    it works
    but is there anyway I can get rid of the menu bars and scroll for the windowresize?

    Look up window.open(). The open() method will create a new window object and allow you to specify the parts of the window that shows, the chrome.

  • Clicking on an email address on a webpage, opens outlook express, but does not create a new mail, which it used to. annoying as it then means cutting & pasting the details

    As I said above, clicking on an email address on a webpage, opens outlook express which is my default email client. In the past it used to also open a new mail, ready for me to type the message but now it does not. It works if I load internet explorer as the browser but does not in firefox. I prefer firefox, so can someone help me resolve this. Its so annoying to have to open a new mail then cut & paste the email details.

    I posted this reply elsewhere in the support forum but I'll copy it here for you, as follows....
    I had the same problem. Initially thought I needed a string (code) to run the "Create new e-mail" command for Outlook but I didn't. I did a few things that eventually made it work, but I don't know for certain which one it was so here goes.
    1.) Go to Control Panel and click on Internet Properties. Go to the Programs tab and double-check that Outlook Express is your default e-mail client. (This is probably for IE).
    2. Close Outlook Express. Select the RUN command from the Start Menu and type the following: <msimn /reg>. Only type the info between the brackets. Click the OK button and wait about 5 seconds. Nothing will happen on screen but the information is being silently written to the registry.
    3. Open Outlook Express and go to the Tools Menu. Select Options. On the General tab, look down to the Default Messaging Programs. More than likely, the top option will say that "This application is NOT the default Mail handler" Click the button next to it that says "Make Default". This should trigger an available option in Firefox, below, if it was not already available.
    4. In Firefox, go to the Tools menu. Select Options. Click on Applications. Under the column, "Content Type" look for the mailto function. In the column Action, select "Use Outlook Express (default)" if it is not already selected. "(default)" must be part of the phrase. Somehow there is code behind this option that will bring up a new e-mail in Outlook that otherwise does not work if Outlook is selected manually. (To choose Outlook manually, you will indeed have to find the string code somewhere.)

Maybe you are looking for