Need to Output 24P Video

I am outputting a video that I cut in 24P and I want to open it up on to a new time line. I want the most uncompressed way of exporting and space is not an issue. Should I go with 8bit or 10bit uncompressed?
Any assistance would be greatly appreciated!!!
Thanks

If you export an uncompressed file, you need to create a sequence that matches those settings. Choose an EASY SETUP that matches, then create a new sequence.
But, again, we are ALL asking you, why are you doing this? I fail to see how exporting an uncompressed QT will help with soundtrack. Even exporting a self contained QT Movie (what you SHOULD be doing if you want a QT with no further compression)....why? All that will do is make your audio into a Stereo pair, and negate any sound mixing you can do in Soundtrack.
Why do you assume that it is the fact that your footage is scattered on several drives is what is causing Soundtrack to crash? That doesn't sound right. Scattered media doesn't cause applications to crash...other things do, like corrupt preferences or bad permissions. If I were you, I'd pose this question in the SOUNDTRACK forum and ask for assistance.
Shane

Similar Messages

Output 24pn video for television?

Here is the situation. I’m working on a video which I shot 720p 24pn on my HVX200. I need to output the video onto tape to play on local TV channels (so I'm assuming i need to make the tape NTSC 29.97 interlaced, 720x480)
I’m using fcp 5.1.4. My sequence is set to 'DVCPRO HD 720p60' with the frames per second set to 23.97.
*This is my question- What is the best workflow step by step going from the 720p24pn timeline to a NTSC tape?*
Can FCP add the pulldown to the 720p 24pn footage? Id so how do I do that? If not, do I need to use an external plugin like Graeme Nattress GAddPulldownDown to do the pulldown and then convert the frame size with compressor? Any other suggestions? Then do I bring that converted video file back into a FCP DV NTSC timeline and print to tape?
I am not familiar with handling progressive footage and 24fps footage so any advice is much appreciated- I just want to make sure I do it right and it looks the best it can.
Thanks

Where in Montana? I lived half my life in Missoula, and went to college in Bozeman.
You gotta talk to the channel as to what they will take. SD 29.97 NTSC doesn't say much at all. BetaSP, Digibeta, DV, DVCPRO 50, 3/4" Umatic, MII (they had MII at the PBS station in Bozeman...ugh). Don't figure on anything...ask them. Just because it is Montana doesn't mean it is completely backwards. I have no doubt they have beta and digibeta tapes. But, being as low cost as the TV stations must be, I'll wager that DV and DVCAM are more the norm.
If you have a DVCPRO HD deck and you are ouputting DVCPRO HD, ONLY THOSE DECKS will remove the pulldown. And an HVX-200 isn't a DVCPRO HD tape mechanism, that is DV. You cannot downconvert from DVCPRO HD to DV via firewire, much less remove the pulldown, and just dropping a DVCPRO HD 23.98 clip into a DV timeline and rendering won't do it either. FCP is horrid at removing the pulldown. Find a deck and export, or export a self contained file and take it to someone with a Kona or Decklink card.
Man, the faculty at MSU have approached me with the idea of teaching as an adjunct for a year. That is heavy on my mind...
Shane

How to see Canon HDV native 24p video on a CRT external monitor?

Mac Pro 2009, FCP 7, brand new install- I'm trying to view Canon HDV native 1080/24p video in my timeline via s-video to a JVC TM-H150C external 15" CRT monitor (or via component if I buy the additional JVC card). The footage is from a Canon HV40 camcorder.
I've spoken with BlackMagic Design and found that the Intensity Pro card CANNOT handle display of Canon HDV native 1080/24p on an external CRT monitor. Apparently the 24 frames per second rate is the problem. Some people on various forums have said that it can do 24p, but BMD says it cannot, and I can't confirm anything without plunking down $200 to test it myself. With all the various flavors of HDV out there, I can't go by what another user has experienced on his system.
I don't need a card for capture, only display, so I don't want to spend a fortune just to be able to use my little CRT production monitor to view the 24p video. What can I do? Is there a setting in FCP or a plugin that can do this?

The no cost way is to nest the 16:9 sequence in a 4:3 sequence. The 16:9 sequence should be letterboxed and will play back at the correct aspect ratio on the monitor.
Otherwise, you'll need a 3rd party device (AJA, Blackmagic, Matrox) to do the letterboxing for you.
x

What adapter/converter do I need to put GoPro videos onto iPad

What adapter/converter do I need to put GoPro videos from my iMac to my iPad?

What file type are the videos? If you have converted them to GoPro video format, iMovie should be able to convert the video to a format that con be used by the iPad.
H.264 videos output by the camera may be able to be used by the iPad by directly importing them from the camera to the iPad with Apple's Camera Connection Kit.

Output iPad video to 27" iMac as an external monitor?

Hi, I was wondering is it possible to Output iPad video to 27" iMac as an external monitor using iPad VGA adaptor?
Thx.

You'd need something to redirect the VGA signal to a DisplayPort connector on the iMac. Your other option is VGA is easily adaptable to S-Video, though its resolution is not as great as VGA and using http://www.elgato.com/ 's hardware for that. A third one is using a Remote Desktop app for the iPad. Several exist.

MPEG-2 Output audio & video in ONE File

I have a lot of videos to batch in MPEG-2 and I need the output to be ONE .M2V file with audio in it. I know that I can do this with Quicktime Pro but that requires me to do this one video at a time. My Compressor presets are great but the output is a M2V file and a separate AIFF file.
Is there any preset setting in Compressor where the MPEG-2 file includes both audio and video in same file?

OOHH.. you need a transport stream?
and since you did mention broadcasting, it makes sense now.
i use the optibase encoder to create elementary .m2v and .ac3 files, then i create a .cfg file and i use manzanitas multiplexer (sp).
but if you dont have that, you can also use MPEG Streamclip to export to your transport file.
as far as creating transport streams on compressor, unless someone knows otherwise, the answer would be no.
but do check out the above app i suggest. it works, but not as good as the multiplexer, but it IS free
Mikey
rereading your post, i see you are asking about a batch transport encoder. the closest i can think of is the above mentioned app by manzanita.
here is the link:
http://www.lilapple.com/mp2tsme.html
it is both a gui based app, but is more powerful (IMHO) command line.
the gui does have a batch option, but you can just as fast write the command syntax.
it works wonders for me! also, it has a trial version, check it out!
Mikey
Message was edited by: Mikey M.

How much external disk space is needed for editing HD video?

If I'm using FCE:
1) How much external disk space is needed for editing HD video:
if I downloaded 150mins of HD video? and
do editing with it which will have an output of 120mins.
Now PC, going to a MAC user soon Windows XP

Hi(bonjour)!
As a rule of thumb for HDV editing, use those numbers:
12 to 15 meg/second for capturing ( your project is 150 minutes long, so 780 meg/minute, or 117 to 125 Gig).
If you do any editing, add transition, video effect, add 12 to 15 meg /second to the total.
As your project will have to be rendered for the print to tape operation, calculate 12 to 15 meg/second for all the length of your final movie. Add this amount to the total. (example: a 60 minutes movie : 49 Gig).
If you want to burn a DVD on your Mac, calculate 3 to 4 meg/second for downconversion to DV material if you check "self-contained" in quicktime export dialog. (example: your finished project is 60 minutes long : 10.8 Gig)
iDVD itself needs 3 to 4 times this amount if you want flawless operation.
Finally, if you use your internal hard disk for all this storage (it's not a good idea to capture on the same drive where Mac OS X belongs), your Mac OS needs some spare room to breath (doing caching, etc), and your hard drive must have a least 25% of free space to avoid file's fragmentation.
As hard drive's price drop, get the maximum size you can afford. 250 Gig is a good choice if you want to do just one project of 90 to 150 minutes at the time.
Michel Boissonneault

I am needing 3 output displays on my mini.

We are needing 3 outputs but the thunderbolt only allows 2 outputs. Can I use the USB output as my 3rd display with an adapter?

Yes, there are USB video adopters like
http://www.tripplite.com/usb-3.0-superspeed-to-displayport-dual-monitor-external -video-graphics-card%20adapter-512-mb-sd…
However, there may be some lag.
there is also this
http://www.matrox.com/graphics/en/products/gxm/dh2go/digital_me/

Need to convert music videos that are tagged as "Movies" and re-rag them as "Music Videos" to get them out of my movies library and into the Music Video folder. Likewise, I ha e some educational videos that belong in "Podcasts." Help?

Need to convert music videos that are tagged as "Movies" and re-rag them as "Music Videos" to get them out of my movies library and into the Music Video folder. Likewise, I have some educational videos that belong in "Podcasts." Help?

Select/highlight the ones that you want to change in your iTunes library, do Get-Info (control-I) and change their Media Kind on their Options tab to 'Music Video' - and then similarly for the podcasts.

Need to convert ajp video file to quicktime

Need to convert ajp video file to quicktime any ideas?

More info needed.
Where is this file? What software made it? If Web based could you provide a link?

Report is executing in background and need data(output) in excel format

Report is executing in background and need data(output) to get downloaded in excel format in my PC from an internal table;;in any drive i.e. C: or D: .When executing in backround it prompt to user with which location excel file to be saved and the name of file.How to download in background in excel format?
Edited by: PRASHANT BHATNAGAR on Aug 26, 2008 6:24 AM

Hi
Download a report to excel with format (border, color cell, etc)
Try this program...it may help you to change the font ..etc.
Code:
REPORT ZSIRI NO STANDARD PAGE HEADING.
this report demonstrates how to send some ABAP data to an
EXCEL sheet using OLE automation.
INCLUDE OLE2INCL.
handles for OLE objects
DATA: H_EXCEL TYPE OLE2_OBJECT,        " Excel object
      H_MAPL TYPE OLE2_OBJECT,         " list of workbooks
      H_MAP TYPE OLE2_OBJECT,          " workbook
      H_ZL TYPE OLE2_OBJECT,           " cell
      H_F TYPE OLE2_OBJECT.            " font
TABLES: SPFLI.
DATA H TYPE I.
table of flights
DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
*&   Event START-OF-SELECTION
START-OF-SELECTION.
read flights
SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
display header
ULINE (61).
WRITE: /     SY-VLINE NO-GAP,
          (3) 'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (4) 'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
          (8) 'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
ULINE /(61).
display flights
LOOP AT IT_SPFLI.
WRITE: / SY-VLINE NO-GAP,
           IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
           IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
ENDLOOP.
ULINE /(61).
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-007
       EXCEPTIONS
            OTHERS     = 1.
start Excel
CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
PERFORM ERR_HDL.
SET PROPERTY OF H_EXCEL 'Visible' = 1.
CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-008
       EXCEPTIONS
            OTHERS     = 1.
get list of workbooks, initially empty
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP.
PERFORM ERR_HDL.
tell user what is going on
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - start
CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
PERFORM ERR_HDL.
add a new workbook
CALL METHOD OF H_MAPL 'Add' = H_MAP EXPORTING #1 = 2.
PERFORM ERR_HDL.
tell user what is going on
SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
          PERCENTAGE = 0
           TEXT       = TEXT-009
       EXCEPTIONS
            OTHERS     = 1.
output column headings to active Excel sheet
PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
PERFORM FILL_CELL USING 1 3 1 'Von'(003).
PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
LOOP AT IT_SPFLI.
copy flights to active EXCEL sheet
    H = SY-TABIX + 1.
    PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
    PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
    PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
    PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
    PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
ENDLOOP.
changes by Kishore - end
disconnect from Excel
     CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'C:\SKV.XLS'.
FREE OBJECT H_EXCEL.
PERFORM ERR_HDL.
      FORM FILL_CELL                                                *
      sets cell at coordinates i,j to value val boldtype bold       *
FORM FILL_CELL USING I J BOLD VAL.
CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
PERFORM ERR_HDL.
SET PROPERTY OF H_ZL 'Value' = VAL .
PERFORM ERR_HDL.
GET PROPERTY OF H_ZL 'Font' = H_F.
PERFORM ERR_HDL.
SET PROPERTY OF H_F 'Bold' = BOLD .
PERFORM ERR_HDL.
ENDFORM.
*&      Form ERR_HDL
      outputs OLE error if any                                       *
--> p1        text
<-- p2        text
FORM ERR_HDL.
IF SY-SUBRC <> 0.
WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
STOP.
ENDIF.
ENDFORM.                    " ERR_HDL
Regards
Murali Papana

What kind of cable do I need to get digital video into my Imac?

I just purchased a JVC Mini DV video camera "GR-D347U" refurbished, just to get the feel of bringing digital video clips into Imovie and combining them with still clips and music. The camera came with just the AV cables and I was wondering what I need to port the video over to my Imac. There wasn't much help on their web site. They do offer a DV cable, that what I am looking for? Thanks for your help.
Dick Skover

Nearly all MiniDV cameras have a 4pin Firewire connector. Looking at the manual (link) for the JVC confirms that.
Macs all have the 6pin Firewire connector (and later iMac have 9pin connectors too) so you simply need a 4pin-to-6pin Firewire cable like this (example).
Once connected simply load iMovie and click import.
regards
mrtotes

I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio t

I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio tracks - specifically one stereo pair to be t1&t3, the other stereo pair to be t2&t4. This is the standard way requested by an international distributor of tv programmes. I understand how to set the sequence in FCP to output 4 audio tracks - either 2 stereo pairs (1&2, + 3&4), or 4 discrete tracks. But how do I then output this as a QT file?
The manual tells me that to export multiple audio tracks, File>Export>QT Movie has it's Config pop-up menu in the Audio Settings area of the General tab of the Sequence Settings. Well, that's set for 4 discrete channels, but the QT export settings only allow for 2 mono or 1 stereo output, and that's what I get when I try it. What it says in the manual just doesn't happen.
Exporting via Compressor, on the other hand, has an abundance of choices of 4-track outputs, none of which are labelled as anything resembling 'discrete'. Would any of those 4.0 settings suffice? Or am I likely to get myself into difficulties further down the line? As I am monitoring for this task on a 2-track audio system, I cannot confirm exactly what I am getting when I use any of those settings.
Any advice would be greatly appreciated!
John

Call me naive, but I've not heard of splitting the stereo pairs like this before.
What broadcaster? (perhaps one of our EU regulars will drop in...)
You can do all sorts of pairing but it is coincident tracks pairing- eg 1/2 + 3/4
Sorry I can't offer anything.
x

Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the video looks glitchy! Please Help!

Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the final video render looks glitchy! Please Help!
I made a new sequence at 23.976 and imported my 1280x720 59.94 video into the sequence... when i rendered it out it looks glitchy!
my client is not allowing 1280 x720 59.94 video files they want 29.97 progressive,25,24,or 23.98
Please Help what do i do! where did i go wrong! this is horrible omg!!!! please help!
Thank you!

Nice!
In my export setting i switched the frame rate to 29.97 and it looks good to me!
Thank you!

Output iPad video to 27" iMac using iPad VGA adaptor?

Hi, I was wondering is it possible to Output iPad video to 27" iMac as an external monitor using iPad VGA adaptor?
Thx.

No. The VGA adaptor is an analog connection and the only inputs are digital Mini Display / Thunderbolt ports depending on your model. It maybe possible with a conversion box of some sort or maybe trying an HDMI to mini display port cable ($44.95) and an iPad 2. The 27' should be able to be used as a second display but the 21 is not. If you have the iPad 2, pick up the cable and the HDMI adapter and try it out. If not, return the cables within two weeks.

Need to Output 24P Video

Similar Messages

Maybe you are looking for