Need to perform a reset

I think I need to perform a full reset of my printer. I have done the #6 and #3 reset but it hasn't helped. I have tried removing paper jam. Basically the printer turns on and starts feeding a half page of paper and that's it. If I try to print a test page from the printer it just says printing... but nothing happens. Same with aligning printer cartridges. Please let me know how to perform a full reset. Thanks,

You need to restore if you're going to do this from your computer.
Restoring iPod to factory settings
Unfortunately, the music on the iPod will be erased because it was purchased with is Apple ID and cannnot be transferred.

Similar Messages

Ipod was disabelled and needed connecting to itunes, with countless attempts nothing happend therefore performed as reset, now instead of turning on and off, ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes

ipod was disabelled and needed connecting to itunes, with countless attempts nothing happend therefore performed as reset, now instead of turning on and off, ipod displays connect to itunes but is not recognised by computer nor will it connect to itunes, try enabelling for restore but only connec to itunes is shown consistently

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

HP Officejet Pro 8500 Wireless A909g, CB023A, how to perform full-reset

I own this printer since December 2009, during the first 15 months I had several problems/defects and also repairs and excange units. The problems continue on and in September 2011, in October 2011 and in November 2011 I got excange devices after repair attempts (one device was delivered without any function). The last device worked with one (?) (minor resp. accepted) problem until today resp. June 2014. ...this is the previous history ---> ---> I need sequence to perform full-reset on HP Officejet Pro 8500 Wireless A909g ---> Please send procedure/sequence how to perform a full-reset on this printer - not hard reset nor semi-reset: full-reset !!! Please send this information without unnecessary questions about my problems: My only problem is to own such printer!

Hello AlexBW,
I received your private message and I thank you for writing me back.
One other step that I think may assist us would be to please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once you have the unit connected directly to a wall outlet, follow the instructions that I provided in the private message.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you once again for your time. It has been a pleasure working with you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I started getting a Timed Out error message on my iPhone 5 when browsing the web that reads Page could not be loaded. Connection timed out. I performed a Reset Network Settings and still get the error. What is the fix?

I started getting a Timed Out error message on my iPhone 5 when trying to browse the internet tthat reads Page could not be loaded. Connection timed out. I performed a Reset Network Settings and am still getting the error message. What is the fix?

Thanks so much for more direction.
I realized that I bought this iPod T4 about a year ago, so decided to check the date and it is still under the 1 year ltd. warranty until 21 Dec. I contacted Apple via Chat and was informed that the problem may lie in the version of iTunes I was running 10.7. Today Apple released v. 11 of iTunes which I was instructed to download. It's TOTALLY different from iTunes 10.7 - drastically different in fact.
The Apple Chat Rep set up a phone call appointment forl 8:00 pm ET tonight where another Rep will call me to make sure the restore was accomplished OK. With v. 11 of iTunes I can't even find the restore option!!! The phone Rep will have to help me navigate v. 11 of iTunes. It doesn't seem intuitive at all. Maybe it's just me?!?!
Thank you for sending this new link for firmware. It's not clear to me right now whether I'll need it or not. The phone Rep will probably somehow be able to resolve the problem. If not, they'll probably send me to the nearest Apple store if the problem is hardware, as it would be covered under the warranty. I will give another update as to what transpires as a result of the phone call with the Apple Rep.
Again, thank you so much for helping me.

I want to use a mac mini as a server supporting storage. Can I pair my macair to it for when I need to perform updates and maintenance ?

I want to use a mac mini as a server supporting storage. I have other devices such as an iMac and iPad that will access information from the server. I do not want to purchase a monitor and keyboard as the unit will sit in a cupboard out of sight. Can I pair my macair to it for when I need to perform updates and maintenance ?

I have a 2010 Mac Mini running Yosemite and Server which I use
as a headless home server.
I have is set up to allow screen sharing and can connect to it and
control it with my iMac, Macbook Pro, iPhone, and a 2011 Mini Server
that I use as an HTPC.
You can check this out for all the Yosemite Server capabilities:
https://help.apple.com/advancedserveradmin/mac/4.0/
I have iTunes Home Sharing set up on it and have my entire iTunes
library on it. I can then use any of my Macs to play Movies or Songs
from it and only keep locally a select subset of that on my individual
devices.
Rather than and update server, I utilize Server's Caching Service. The caching
server will duplicate any update download (system or MacApp Store purchases)
any time a device that is connected to my network down loads one. The update will
then be stored locally and all other devices will download the update from it which
can be faster than from Apple directly. This has the advantage of only having to download
once with limited bandwidth internet connections. There is also an Update Server service
available, but it is some what more involved in setting up. However, it will download
and store all available updates.
There is another thing as well if you do not care for syncing things like Contacts, Calendar, etc.
to iCloud, you can set Server up to sync these items across devices locally.

HT1212 I found an iphone over one year ago. Its locked with a passcode. I kept waiting for the owner to call it. They never did. I went to ATT store today, they put a new sim card in it. but now itunes needs the passcode to reset it to factory settings.

I found an iphone over one year ago. Its locked with a passcode. I kept waiting for the owner to call it. They never did. I went to an AT&T store today, they put a new sim card in it. and told me to go home, log on to itunes, and restore the phone to "factory settings".But itunes says the phone is locked and it needs the passcode to reset it to factory settings.
Any workaround? Or, am I doing something wrong here?
Thanks so much.
Joe

Sounds like you may be the owner of a new phone! If you don't need or want it and no one claims it you probably can sell it. Check eBay to see what the going rate is.
You are to be commended for at least trying to find the owner. Many wouldn't.
Best.
GDG

Need to perform both Queue and stack operations in Visual C# code

Need to perform both Queue and stack operations, is any Data Structure available for this. or how can i custom create the structure for this?

Hi,
In this structure contains base logics of Queue and Stack. Well stack plays major role here with operations of PUSH, POP with additional operation of Queue i.e., ENQUEUE and DEQUEUE. Here the stack has enqueue and dequeue
https://code.msdn.microsoft.com/The-Stacked-Queues-An-11f3703a
Regards,
Selva Ganapathy K

How to shrink this LOB and what steps need to perform.

Problem Description: hi
one of our production database having one table i that table having 320 gb LOB in one column
can you please suggest how to shrink this LOB and what steps need to perform.
during shrinkg of LOB how much undo tablespace is require,and does it create more archive log because LOB size is 320gb.
this table having function based index also.so we will not shrink it.
we need to release the space from database this in only big LOB out of my DATABASE its took approx. 80%.
there is any way we can reclame this space with less time.
please suggest how to do this and how much downtime is required.
database version 10.2.0.4 and OS AIX 5.3

Hi;
Please check below which could be helpful for your issue:
Shrink LOB Segment On Partitioned Table [ID 802059.1]
How to determine the actual size of the LOB segments and how to free the deleted/unused space above/below the HWM [ID 386341.1]
Why is no space released after an ALTER TABLE ... SHRINK? [ID 820043.1]
Troubleshooting Guide (TSG) - Large Objects (LOBs) [ID 846562.1]
Regard
Helios

What do I need to know about resetting my ipad2, What do I need to know about resetting my ipad2

I just moved back to the states from Singapore. What do I need to do to reset everything, including country, apple Id, credit card info

to update your apple id info you can simply go to the app store and at the very bottom left you will see your apple id signed in to the app store, tap that then view id then put in your password. You can then update your country and region and also your billing information.

Do really need to soft/hard reset after updating f...

hello..
i just wanna know do we really need to soft/hard reset our phone after updating firmware??
btw im using nokia 5800XM..im updating my firmware from V50 to V51
tq..
Buy Original..See Original..
Solved!
Go to Solution.

In my experience I've found that when I don't do the reset before and after I invariably have problems. For example when I updated my N97 to the v22 firmware the auto-rotate function stopped working properly.
I actually also remove all apps and format the mass storage prior to the firmware update which ends up taking a ridiculously long time with the reloading of my media and maps but I now realize that I'll end up having to do it anyway so I might as well do it properly the first time.
It could just be the N97 as it's such a hunk of junk but I think it's more likely that it's an issue with the update process in S^1.
Nokia N97 (RM-507) v 22
iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

Which two operattions do you need to perform after restoring---QNo.106

In your database, all the tablespace are locally managed. You started RMAN using recovery catalog and restoring the contol file by using the following command:
RMAN>RESTORE CONTROLFILE;
which two operations do you need to perform after restoring the control file from backup?(choose two)
A. shut down and restart the instance
B. add new tempfiles to the temporary tablespaces after recovery
C. perform a media recovery and open the database with the RESETLOGS option
D. perform a media recovery and bring the database to NOARCHIVELOG mode

This question is a little ambiguous.
C is a correct answer when restoring a control file
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta051.htm#BGBJJGCB
Restrictions and Usage Notes for RESTORE CONTROLFILE
After you restore a backup control file, you must run RECOVER DATABASE and then open the database with the RESETLOGS option.
B. If you were restoring a database from a backup you would need to create the temp files because temp files are not backed up.

Every time I open iPhoto, the program freezes, showing me the spinning rainbow of death. I always need to perform a Force Quit. I have updated my software, but that did not help.

Every time I open iPhoto, the program freezes, showing me the spinning rainbow of death. I always need to perform a Force Quit. I have updated my software, but that did not help.

tullch24
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Need to perform an inter facility mass asset transfer

We have a custom program to perform mass asset transfers between facilities in different company codes. However, we now need to perform mass asset transfers between facilities in the same company code. Is there anything standard that can handle mass inter facility asset transfers?
Thanks,
Patrick

Patrick,
Please try OA02 - Maintain substitution for Mass change and create your own substitution.
Then use AR01 to generate the worklist. Enter the assets to be changed and create the work list.
Go to AR31, enter the worklist number and release it.
Check whether this works for you or not.
Regards,
Vinod

Do I need to perform Process Index on the cube when measure groups has been processed with full individually?

hi there, I am not sure if I need to perform process Index? Do I have to do that after I process full on measure groups?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

I did process update on all dimensions... after that, I did process full on each measure groups...
In this case, do I need to process index on the whole cube?
Hi Cat_ca,
ProcessFull - Simple to digest, applies all objects which means it discards the storage contents of the object and rebuilds them.
ProcessIndexes - Applies to dimension, cube, measure group, and partition.
Since you did process full on each measure groups, I don't think you need do a processindex, here are some links about process options on Analysis Services for your reference.
Different Kinds of SSAS Processing in simple words
Difference between SSAS ProcessUpdate and ProcessFull
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Once you install RAM into Mac book, do I just turn it back on? Do I need to perform some type of action?

I received some great replies concerning my increasing the RAM on my laptop. From the information gathered I was able to gather more information and am curious as to what and if there are more steps besides the ones I've listed below:
1. Power off
2. Take battery cover off.
3. Remove battery cover.
4. Remove battery.
5. Remove 3 screws.
6. Remove L bracket.
7. Remove RAM(2 sticks of 512MB).
8. Install new RAM(2 sticks of 1GB).
9. Insure the new RAM is snug into the slot.
10.Reverse the process.
Now at this point do I just power it back up or do I need to perform some other type of action.
Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          1 GB
Bus Speed:          667 MHz
Boot ROM Version:          MB21.00A5.B07
SMC Version (system):          1.17f0
Any input would be appreciated.
Thank you,
Tq1

Just turn it back on. The MacBook will automaticly recognize the new RAM.
If the MacBook doesn't turn on the RAM may not be the right speed for a Mac. Macs are very finicky about RAM. Much more so than PCs. The way to test that would be to put one of the old RAM sticks back in one slot and start up.

Need to perform a reset

Similar Messages

Maybe you are looking for