Need to post text without the box

When I post text, it also posts my text box. I want to just post the characters on top of the movie. Suggestions? Tnx

You can copy music and itunes library to computer is there's enough hard disk space on new computer.
If you don't have iTunes installed on new computer, simply connect iPod to computer, copy the 'iPod_Control' folder to computer, all music store in that folder, then install iTunes and drag all music to iTunes and sync.
There's a lot of software do this job. What I'm using on Windows is ipod copy expert

Similar Messages

  • Tiger to SL without the Box Set?

    I currently have a MBP w/ Leopard and a Mini with Tiger. What is the cheapest way for me to get both up to SL?
    Is there any way to go from Tiger to SL without the Box Set? I don't want, or have to pay for, iWork?

    You made it very clear and that's a great solution. Problem is, Apple doesn't offer the Leopard update:
    http://store.apple.com/us/browse/home/shop_mac/software/apple?n=osx&mco=NDcwMzM1 MQ&s=topSellers
    So, as I have been saying (and as Apple states on the website), if you are currently running Tiger, you MUST purchase the Box Set to upgrade to SL. Meaning, the only option Apple offers for Tiger to SL is to buy the Box Set. Thus, following Apples guidelines for updating to SL, I must (aka forced) to purchase iWork.
    All I'm asking is why wouldn't Apple make an SL update for any OSX and charge $100 or $130, rather then imposing (notice I didn't say force, which they are really doing) iWork on everyone. You have to admit, that does sound like something Microsoft would do.
    I knew the "msish" line would get everyone riled up ....hehehe.
    Message was edited by: blazz

  • When I try to post a comment on an article I just read, my post stays in the box w/out posting. And when I want to click thumbs up or down in the comment section in these articles, the number stays the same. Also, my Skype has stopped functioning.

    When I try to post a comment on an article I just read, my post stays in the box w/out posting. And when I want to click thumbs up or down in the comment section in these articles, the number stays the same. Also, my Skype has stopped functioning.

    Glad you seem to have sorted things out.
    The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

  • How can I paste a part of a sheet from Numbers in Pages as text, without the formulas.The reason I need this (and was used to in Office) so that I have the freedom to delete something in one cell (in pages document) without causing changes.

    How can I paste a part of a sheet that I copied in Numers in a pages document without the formulas, simply as text. Used this a lot in Office. When I make some changes in the pages document. f.i. deleting a cell, I don't want to change other cells. Also when I copy a part of a sheet from Numbers and one of the cells that is part of the formula is not also copied, when I paste in Pages it shows as an error.
    Hope that You can me help with this.

    Leon,
    There are two solutions to the first question, narrowing to one solution when you have a broken link causing an error.
    Here's the "works always" solution.
    Copy (Command-C) the table or range in Numbers
    Click off the table on the blank canvas of the sheet.
    Edit > Paste Values
    Command-C
    Switch to Pages
    Command-V
    Regards,
    Jerry

  • Exporting text without the background?

    Hi all,
    I am working on an awards project using keynote and Livetype, I would like to export specific text livefonts without the generic background. For example, after exporting, being able to drag them onto a keynote slide without the black background being imported aswell, I just need the text. I am aware I could use Photoshop to remove it but as it is a large project I dont want to have to remove it all. any info would be greatly appreciated.
    many thanks tommy
    DUAL 2.5GHZ G5 20" CINEMA DISPLAY 2.5GB RAM   Mac OS X (10.4.8)   LOGIC 7.1.1 MOTU 828 MK2 ISIGHT BT KEYBOARD AND MOUSE 30GB ipod Video

    Photoshop would not be appropriate for removing the black at all since it's not really there if you export properly with the alpha channel from LT.
    LT is not very good typesetting tool unless you simply must have access to the weird custom fonts or visual effects. You cannot perform typesetting adjustments such as kerning in LT.
    bogiesan

  • Checkbox without the box

    Hey Forum,
    I'm trying to create a JCheckbox without it showing the box. The functionality is simple, when a user clicks on the text of the checkbox the check will appear or disappear (but no box should be visible). I'm using this in a JMenu to turn tabs on and off.
    Any ideas on how to do this?
    Thanks
    Jurgen

    Or JCheckBoxMenuItem?
    Or a normal JMenu where you manually set the icon to a check image or null?

  • Return Sony without the Box?

    Hello,
    I bought a Sony hdr-as100v.
    It works as it should.
    Yet truthfully, I want to exchange it for the Go Pro Hero3 Black.
    Can I return this Sony cam without the original box?
    I have all the accessories, documentation, original recipt, with me.
    Yet I do not have the box the camera came in with.
    Any idea what I can do?

    Hey sonyCamUser,
    Good question! You can absolutely return products without the original packaging as long as you're still within the 15-day return period. Just be aware that a small deduction may apply for any missing documentation or accessories when processing the return. The return period is also extended to 30 days for My Best Buy Elite members and to 45 days for Elite Plus members. Full details can be found here:
    BestBuy.com > Help Center > Return & Exchange Policy
    http://bbyurl.us/RTE
    I hope this helps.
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

  • RVS4000: Need help with out-of-the-box device

    The router is performing very badly.
    1. Router's "INTERNET" is connected to ADSL cable modem, providing automatically an IP address.
    2. The device is getting "freezed"/"stoned" very often. The longest time record for up-time was just over 1 hour. The shortest up-time was somewhere over 2 minutes.
    3. When "freezed" the router:
        a. Still can perform as a switch
        b. No access to WAN
        c. No ping to the router
        d. Green indication lamps.
        e. No access to the web-interface
    4. Same behavior with 1.3.0.5, 1.3.1.0 and 1.3.2.0 firmwares
    5. Sometimes after "Restore to factory defaults" DIAG-RED led is lit, and does not go off.
    6. To get device back helps to power-off it for an hour or two.
    Is it possible to get any information from the router, when it is "freezed"

    Pavel Kopylov,
    It look like we got out of sync. I see you just sent another reply about opening the box Friday.
    With it only being Friday, I would take it back to the store I bought it from and get another. The same or better.
    ======================================================================
    If you want to use this as a learning experiance and figure out this problem yourself, then the following maybe for you:
    In all of your communications. I hear you saying your RVS-4000 freezes and will not communicate. No in or out of data. Is that correct?
    You are also saying, these freezes occur at various times. Correct?
    Which I hope this means is that it is working until it stops working...
    If that is correct. Then you need to figure out if the problem is coming in over your WAN connection or it's the hardware of the Router itself.
    If you think it's the hardware of the Router. Then do things like measure the temperatures of the Router. (Carefully) Try to heat it or cool it to see if this makes it fail, quicker... Check the Voltage to this Router and make sure it's correct and you are not getting Black outs or brownouts, etc... Also check for lose data connectors. (Watch the lights on the front panel)
    However, If you think this is from a TCP/UDP attack on your Router. Then you can place a HUB between your Router and the Cable/DSL Modem and the Router. Next plug in a PC into the same HUB and run Network Software Monitoring on this PC in Continues Record mode. Until a failure. Then go thru the Data and see what you find.
    There are a few free Network Software Monitoring Tools you can find and download. Even Microsoft has a nice one for free. Microsoft Network Monitor 3.x
    You can also buy another Router. The same or better and if you have the same kind of problems. Then it just might be coming in over your connection. And the new Router can then be returned as its still new.
    You can call Cisco and or your local ISP and work with them on this problem.
    These are just a few Ideas... I'm sure others will have even more.
    Bruce

  • Saving Delivery text without the delivery number

    Hi,
    during delivery creation I need to create a standard item text. I did this using SAVE_TEXT in userexit_save_document and it works fine on the central system. But, the delivery is replicated to our decentral system and the text value is not there. The reason it fails is that the function SHP_BAPI_DELIVERY_REPLICA is called before the COMMIT so the new text is not saved yet.
    I cannot find any userexit before the SHP_BAPI_DELIVERY_REPLICA where the delivery number exists - the number is '$        1'. 
    So...._is it possible to create a text where the delivery number is not generated yet?_
    This is what I have tried with VBELN = '$        1'  and  'XXXXXXXXXX':
            CONCATENATE lips-vbeln lips-posnr INTO l_textname.
            l_headertext-tdobject = l_stxh-tdobject.
            l_headertext-tdname   = l_textname.
            l_headertext-tdid     = l_stxh-tdid.
            l_headertext-tdspras  = l_stxh-tdspras.
            CALL FUNCTION 'SAVE_TEXT'
                 EXPORTING
                      header          = l_headertext
                      savemode_direct = 'X'
                 TABLES
                      lines           = lx_lines
                 EXCEPTIONS
                      id              = 1
                      language        = 2
                      name            = 3
                      object          = 4
                      OTHERS          = 5.
    Any ideas?
    Thanks.

    Hi,
    Try calling the function module SAVE_TEXT with parameter
    insert  = 'X'
    fin orm routine 'USEREXIT_SAVE_DOCUMENT_PREPARE" ,user exit 'MV50AFZ1'.
    Regards
    Vinod

  • Logic Pro X needs Rap around text in the Markers

    Where is the Rap around text in the Markers, this is a major problem 4 me...............?!!!!

    Henrik C G wrote:
    Hi, 
    Thanks for answering.
    I got: Svensk - Pro (Swedish Pro)
    Where do i find the Logic Pro X preferences regarding this?
    Sorry, I thought i was clear that I meant the Mac's system preferences, not Logic's preferences.
    Might want to check your fonts for errors.

  • How should I transport my imac without the box

    I am going to take my imac home with me for the summer but i cant find the box. What is the best way to transport it with out paying for an expensive iLugger?

    Go to the USPS website.  They will ship you boxes for free.  idk what sizes they offer, but surely they have something that you could use.

  • Need to Put text in the Body of the email while sending PO as email attachm

    Hi MM friends,
    My client wanted to have the PO emailed to the vendor.
    I could do all the necessary steps to do that. thanks to the earlier posts in SDN for the same. It helped a lot.
    I have few other requirements that needs to be addressed.
    1.We need to send a 2 liner note in the email along with the PO attachment.
    how to put this note in the body of the email ?
    2.The PDF PO doc created as attachment to the email has a std name... starting  with SAPM....etc...
    Can we have PO no as the PDF doc?
    Request your help..
    Thanks in advance.
    Sarvan

    Hi Sarvan
    Go to messages >> communication method , change the field Cover Page Text with ur po number and send. This is a manual process which you will have to do it for each po.
    Now if you want to automate this then you can ask ur abaper to write a small program which will copy the po number to this field. 
    Table Name       NAST
    Field Name       TDCOVTITLE
    Regards
    Rajesh
    Do reward if useful.

  • Centralise text in the Box

    Hi Sir/Mdm,
    I humbly seek help and tips to centralise a word in a box. Whenever I drag the Text Box, the first character is always starts from the left and it is not in the middle of the Text Box. Any help is greatly appreciated. Thanks

    The way tis is usually done is to add a new fill and
    drag it below the characters in the Appearance Panel
    then select the new fill in the appearance panel and go to Effects>Convert to Shape>Rectangle (or Rounded Rectangle or Ellipse)
    and you get this
    it is actually better to use point text with soft returns instead of a frame so that as you edit the text the rectangle
    will resize automatically.
    If you us a text frame you need to manually resize the text frame first before you add text or after you delete text.
    Here it is with point text
    Here it is with added text and point text
    And as i continue to type it resizes
    you can also constrain the width so that you manually adjust the breaks according to a specified dimension for the rectangles width.
    You just change the line breaks
    Edit ignore what I wrote here before the height does not adjust but it remains centered until you run out of room

  • Write a text in the box

    In my sapscript form, which have a three box. Now, i would like write a page no in one of box of bottom right corner, how can i do that. Thanks

    hi portfoilo,
    good question...
    since u have 3 boxes...to display the page number in 3rd box u just need to shift that particular variable from left side where the horizontal line of 3rd box is defined...
    thats all....
    hope this would help u out..
    please reward points in case usefull...
    regards,
    Prashant

  • Legal to use iWork '09 from box set without the box set?

    I purchased iWork '09 from the Mac Box Set off of ebay. It was for only the iWork software and not the entire set. The seller is telling I can legally have this software installed and use it even though the bx set comes with one serial # for all software included in it.
    I did find a post on a different forum that states it is illegal to sell parts of the set separately. Is any of this true? Am I okay to have this software or should I return it? I am worried since I have a business which will use this software and just want to make sure there is never a chance for repercussions in the future.
    Thanks

    Yep. One of the reasons to be quite careful about dealing on eBay. Here's what's provided at the online store:
    The Family Pack Software License Agreement allows you to install and use one copy of the Apple software on up to a maximum of five (5) Apple-labeled computers at a time as long as those computers are located in the same household and used by persons who occupy that household. By “household” we mean a person or persons who share the same housing unit such as a home, apartment, mobile home, or condominium, including students who are primary residents of that household but reside at a separate on-campus location. This license does not extend to business or commercial users.

Maybe you are looking for