Need to Print the Report Output
Hi,
I want to print the report output. How to install a printer in Oracle Appls. If i give number of copies 1 or morethan 1(from SRS Window)...the report is completed-warning. pls advice
Thanks in advance.
Hi,
I changed the printer to Epson LQ2170 and Epson LQ2180 but since I don't know the initialization and reset parameter (already search for the manual but couldn't find it, downloaded from Epson's website but couldn't find it either) so I register it with LQ1070. I'd tested to print the reports directly from Reports Builder 6i and it printed just as I wanted to but when I tried to print from oracle apps it only printed up to about 3/4 width of the paper. I tried to change the report's height and width, paper size, orientation but no luck. What should I do? Thanks
Similar Messages
-
Need to send the report output in email body.
Hi Friends,
I need to send the report output in body of the email but not as an attachment.
Requesting your suggestions. Please elaborated answers are expected.
Thanks & Regards,
S.Suresh Babu.If you are looking for same output to be available in the email body, i think this is not possible.
If you are just concentrated on the data, then you can do as below.
1. In your custom program, submit the actual report program via spool and by making use of that spool, read the spool content (We have function modules which can download the content from spool to the internal table), and by making use of this internal table, build the actual internal table as required which will be passed to email function module lets say SO_OBJECT_SEND etc..
2. You can make use of even LIST_TO_MEMORY and LIST_FROM_MEMORY function modules as well instead of spool, if you have data in the final internal table.
I am not sure, how can we handle in terms of logos if any.....or the data in the top of page related things...... -
Directly Printing the Reports Output to a Printer in 10g.
Hi All,
We need to print directly from the reports to a printer. How it can be achieved?
i.e Reports running in client machine and when I hit the Run Button in my form the report runs. Similarly the report output should be printed to the printer attached to the Server PC where reports server is running.
How this can be achieved without much of complication. We have achieved this changing the existing servlet of report which does this. But is it possible to achieve this on other ways too.
Appreciate early responses and awaiting for it.
ThanksHi,
Many Thanks. I checked the URL its very descriptive and helpful.
Meanwhile when i try to configure printer from the application server it asks for the network userid and password. What is that which i should provide? Either its the local user account of that PC or the administrator user on which the oracle services run.
Please clarify.
Thanks in advance. -
NOT Able to print the Report output in the Printer
Hello guys
I have a concurrent Program-which is a report.A printer is installed in Oracle apps and i have assigned that printer to the concurrent Program.Now the problem is when i run the report after giving number of copies as 1 in options button,the report is getting completed sucessfully but it is not getting printed in the printer.
please help me in this issue.
log message:
Printing output file.
Request ID : 56734501
Number of copies : 1
Printer : xx-printer
Finished executing request completion options.
thanksPl post your OS and EBS versions and pl confirm that you can print the file to the printer from the OS level using OS commands.
MOS Doc 297522.1 - How to investigate printing issues and work towards its resolution ?
HTH
Srini -
Need to download the report output list to a Excel file.
Hi,
I have a report output list, which i need to download to an Excel file, could any body suggest how to do this with out writing the ws_download.
My report data is coming from two internal tables, one internal table for left side reprt display and another internal table for right side report display, both the internal tables having the same fields.
suggest me how to combine these two internal table data in one internal table.
2 internal table structure is same but data is different.
SunilHi,
in the o/p list use the below menu path.
LIST>SAVE/SEND>FILE,
then a pop-up window with different formates will appear,then choose u r required format.
Thanks,
Anji -
How to increase the font size of the report output in the printout.
Hi Team,
i have a requirement like to print the report output as a direct print from an internal table.I am using the below mentioned code, the output is printing fine but the Font size of the output text is so small so i need to increase the font size of the text of output data.
call function 'GET_PRINT_PARAMETERS'
exporting
immediately = 'X'
line_count = 65
line_size = 320
mode = 'CURRENT'
no_dialog = ' '
release = 'X'
user = sy-uname
importing
out_parameters = st_param
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
if sy-subrc eq 0.
new-page print on parameters st_param no dialog.
could you please suggest me how to increase the font size while printing the report output..
Thanks in Advance.
Puneet.hey,
in our system when we click on print. on widow is coming.
there is a properties button.
we click on it.
there FORMAT----AND then we select forat from there and then printing .
not sure. but check on ur system. is there properites button.
HI,
READ THIS,
You can specify attributes such as the character width and font size in the device type formatting yourself.
contact ur basis team .
in the report PRINT-CONTROL SIZE option is there. try to find more o this. -
Print the report on page has width larger than height and not landscape mode
Hi,
I'm trying to print report on page (Width: 18cm, Height: 13cm) which the width larger than the height.
The problem is windows keeps changing the page oreintation to landscape and when I change it back to portrait its changing the width to 13cm and height to 18cm.
I'm using dot matrix printer to print the report, if i put Landscape , printer is printing the text in horizontal.
Already i have tried to setup the custom for on printer, and used custom page size but it is changing to landscape.
I need to print the report with out preview, direct print top printer, NO PDF....
Thank you .....Hi Anil,
After testing the issue in my environment, I can reproduce it. When I set (Width: 18cm, Height: 13cm) as the Report Page size, it would automatically convert Orientation from Portrait to Landscape. Because the Orientation displayed is dependent on the page
width and page height of the report.
But in my scenario, the Orientation option just change the Width and Height sizes, it couldn’t affect the text rotation. I guess this issue can be caused by the printer and printer driver, please try to update them. Reference:
http://stackoverflow.com/questions/15244336/printing-in-landscape-or-portrait-automatically-rotates-text-ssrs?lq=1
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Hello guys,
I have button in my form, which displays
a report, I need to print the report,
once the the button the pressed.
Are there any ready made functions !!!
A.Kishore
nullKishore,
Do you want the report to show up and then
the browser print window to show up?
If so, then in the unstructured template, call the window.print() method using the onLoad event for the body tag. When the report loads in the browser, you will get the browser print window (in Netscape). In IE, the print starts automatically. -
<table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"></tr><tr><td height="1" style="font-size: 1pt"></td></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p>I initiate a CR XI from a C++ routine using ShellExecute command, the report file is opened and the C++ program continues to execute, this is working fine, now I need the following two things:</p><p>1. When the report is invoked I would like it to run and print the result either to a printer or to a file.</p><p>2. I need to send the report parameters since it will not prompt for it if it runs automatically.</p><p>Thanks in advance for your help.</p></td></tr><tr></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p> </p></td></tr></tbody></table></blockquote></blockquote>
Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly
-
I want to print the LOGO on the report output
Hi ,
i want to print the LOGO on the report output. How can tyhis possible ?using "SMWO" to upload LOGO image.
add a customer "customer control" named P1 using "SE51"
the following program for your reference:
=============================================
REPORT ytest17.
DATA ok_code TYPE sy-ucomm,
save_code TYPE sy-ucomm.
DATA container TYPE REF TO cl_gui_custom_container.
DATA picture TYPE REF TO cl_gui_picture.
DATA init.
CALL SCREEN 100.
MODULE user_command_0100 INPUT
MODULE user_command_0100 INPUT.
save_code = ok_code.
CLEAR ok_code.
CASE save_code.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. "user_command_0100 INPUT
MODULE status_0100 OUTPUT
MODULE status_0100 OUTPUT.
IF init IS INITIAL.
DATA url(255).
CLEAR url.
CREATE OBJECT container
EXPORTING container_name = 'P1'.
CREATE OBJECT picture
EXPORTING parent = container
EXCEPTIONS error = 1.
IF sy-subrc NE 0.
ENDIF.
PERFORM load_pic_db CHANGING url.
CALL METHOD picture->load_picture_from_url
EXPORTING
url = url.
IF sy-subrc NE 0.
ENDIF .
init = 'X'.
ENDIF.
ENDMODULE. "status_0100 OUTPUT
*& Form
text
FORM load_pic_db changing p_url.
data query_table like w3query occurs 1 with header line.
data html_table like w3html occurs 1.
data return_code like w3param-ret_code.
data connect_type like w3param-cont_type.
data connect_length like w3param-cont_len.
data pic_data like w3mime occurs 0.
data pic_size type i.
refresh query_table.
query_table-name = '_object_id'.
query_table-value = 'TESTPIC'.
append query_table.
CALL FUNCTION 'WWW_GET_MIME_OBJECT'
TABLES
query_string = query_table
html = html_table
mime = pic_data
changing
return_code = return_code
content_type = connect_type
content_length = connect_length
EXCEPTIONS
OBJECT_NOT_FOUND = 1
PARAMETER_NOT_FOUND = 2
OTHERS = 3
IF sy-subrc <> 0.
pic_size = connect_length.
ENDIF.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown
SIZE = pic_size
DATE =
TIME =
DESCRIPTION =
LIFETIME = cndp_lifetime_transaction
CACHEABLE =
SEND_DATA_AS_STRING =
FIELDS_FROM_APP =
tables
data = pic_Data
FIELDS =
PROPERTIES =
COLUMNS_TO_STRETCH =
changing
url = url
EXCEPTIONS
DP_INVALID_PARAMETER = 1
DP_ERROR_PUT_TABLE = 2
DP_ERROR_GENERAL = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
*& Module CANCEL INPUT
text
module CANCEL input.
LEAVE PROGRAM.
endmodule. " CANCEL INPUT
============================================= -
Hello All,
I have a report page with some search item.When I print the page the title does not appear on the output page.
How I can print the report and its title on the output page.
any quick help pleaseHi Mohammad
I allow users to download reports using the Interactive Reports Region.
If you use that method then you can insert a title at the top of the report by populating the Report Region > Print Attributes (TAB) > Page Header
Note: This is available when using APEX coupled with Oracle Business Intelligence Publisher. It does not work with "CSV" output.
Kind regards
Simon Gadd -
PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12
Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report. -
Unable to print the report after SP2 (CR 2008 / VS 2008)?
I'm developing an ASP.NET application using VS 2008 (Framework 3.5). I have installed CR 2008 with SP (0, 1, and 2).
I created an invoice report and I printed it as test for the report and it works okay. I needed to change the page size of the report to a user defined size and reset all of the margins to zero.
After I did that I was unable to print the report again and every time I tried to print the report nothing gets printed.
I checked my environment to find the cause of this problem but I found nothing except that I'm using CR runtime for SP1 and I'm currently using SP2. So I did remove CR runtime for SP1 and install CR runtime for SP2.
The problem didn't go away and I faced one more problem.
Usually I'm using a dataset as a data source for my reports. After installing the CR runtime for SP2 I couldn't see any date column in my report data source (Dataset). All other types of columns appear except date fields! Why I have no Idea?
After I do some more testing regarding my issue I found out the following
1. When I add a new report to my web application and I don't change the page setting the report work fine.
2. When I change the page setup settings (Page Margins, horizontal width and vertical height) the report show up okay but never gets printed.
Why I don't know?
Addition to that the report dataset (Data Source) showing in the field explorer never shows any date type field?
All of the above issues happened with me after installing SP2.
OS: WindowsXP Pro SP3
CR 2008 (SP 0, 1, 2)
VS 2008 SP1
Please I need your help.
Edited by: Sami Aljafer on Oct 12, 2009 8:35 PM
Edited by: Sami Aljafer on Oct 12, 2009 8:38 PMHi, Sami;
Are you printing from the Crystal preview window, or in code?
If you are printing from the preview window, try printing via code, such as:
An example of print to printer:
crReportDocument = New ReportDocument
crReportDocument.Load("h:\labels2.rpt")
''Use error handling in case an error occurs
Try
''Set the printer name to print the report to. By default the sample
''report does not have a defult printer specified. This will tell the
''engine to use the specified printer to print the report. Print out
''a test page (from Printer properties) to get the correct value.
crReportDocument.PrintOptions.PrinterName = "
dwcb12003\ZDesigner ZM400 200 dpi (ZPL)"
''Start the printing process. Provide details of the print job
''using the arguments.
crReportDocument.PrintToPrinter(1, True, 1, 1)
Please post your question about the dataset as a new post.
Regards,
Jonathan
Edited by: Jonathan Parminter on Oct 12, 2009 2:28 PM -
How to Print the Report Column headers on each page of any report
Can someone offer assistance on how I can go about achieving the ability to show and print the Report Column headers on each page of any report using the Print Attributes of APEX 3.0? These reports will be printed using Excel and Word.
I read a thread with a similar request but the answer seems vague for my level of understanding.
I am connected to a print server and using BI Publisher.
Thanks,
RicHello Ric,
>> These reports will be printed using Excel and Word.
I'm not sure I understand what you are trying to do. You are using a very powerful tool – BI Publisher – why do you need Excel or Word for printing? Is there a special need only Excel or Word can provide?
One of the major advantages of using BI Publisher is that it's taking care of all these tedious tasks like reasonable page breaking, headers and footers, and also table headers.
Regards,
Arie. -
How can I make signature darker when I print the report?
I need to put my manager's signature on the report. The signature is too light, How can I make it darker when I print the report?
I used file link and OLE, both did't make it.
Thanks.No way to do it directly in the report. You need to work with signature image file using any graphic software to increase its contrast. The easiest probably would be to use Paintbrush and change the image to black-and-white, then save back as jpeg file.
Maybe you are looking for
-
Found random files in trash - date/time when I wasnt home
I noticed today while looking in my trash bin, that there were pictures that were not mine or that I havent even seen before (ie Denzel Washington at a hospital, planes, emoticons, ect...) All the items are dated at times when I am either not at home
-
APD with date variable in filter object
Have an APD with a filter object. The filter uses a range for 0CALDAY. the range includes a variable (customer_exit) whic calculates the date of previous fiscal period-end date. Works perfectly in Bex. However, when running the APD, the date format c
-
Essbase 11.1.2.1 Users not inheriting filter access from group
Hello all! We installed Essbase 11.1.2.1 in a distributed environment integrated with Shared Services and ran into an issue when provisioning users via groups. Using Shared Services we created a Native Directory Group and User. We provisioned the gro
-
Load all brushes in brush preset folder at startup
I'm wondering if this is possible or if there is a better solution for what I'm trying to do. What I need to do is have a central repository of brushes or brush sets. I'll create a symlink inside the brushes folder to a space in the local drive. When
-
Pcsync2.exe application error 0x00000034
I'm having trouble with Nokia PC Suite, I've uninstalled & reinstalled it several times and each time I get the error entitled "pcsync2.exe application error" with the following "The application failed to initialize properly (0x00000034) click OK to