Need to Print with color.

My printer (HP Photosmart D110 series) has new color cartridge, and is already Align. When I print, It come out with any color the paper, just black and no color. What Can I do?

Hi,
Try printing a Self-Test report to check rather the issue is ink or driver related:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00039556&cc=us&dlc=en&lc=en&product=4023246&tmp...
If you do see colors printed correctly, access the printing preferences from the application use to print by clicking File > Print and then the Properties / Preferences / Settings button.
Click the Color tab and ensure the driver is not configured to print as Grayscale or Black Ink only.
If the hardware report does not include any color as well the cartridge might be faulty.
Remove it and ensure you removed any tape from it, try following the steps below and check if that may help, if the same persists try replacing the color ink cartridge:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02002581&cc=us&dlc=en&lc=en&product=4023246&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Need to print with out comma

Hi all,
My table is loaded like this 123,678 .00 .I need to extract the data without comma like this 1234678.00
can any one help me to resolve this issue?
Thanks in advance.

You can do this.
data: str(15) type c value '123,678.00'.
translate str using ', '.
condense str no-gaps.
ABAP related questions should be posted in the ABAP forum.
As I see you have done.
need to print with out comma
Regards,
Rich Heilman
Message was edited by: Rich Heilman

Printer Printing with color ink in greyscale mode

Even you choose to print in black and white only, printer prints with color inks.
Printer Model : HP C4580

Hi GT501,
Thank you for your response!
Please go through the following:
Reset the printing system. OS X Mavericks: Reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
Let's start with those two steps for now, and let me know what happens.
Hope this is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Filling a hand drawn print with color

Beginner! I am trying to fill a print that has been hand-drawn (b&w) with color. I have traced it and made Live Paint Groups but when I try to color it, it only allows me to color in grays. I know there is an easy answer for this! I have saved the Color Mode as RGB and CMYK but it still converts back to grey when I begin to paint. ??? I am very new to Illustrator and cannot find how I need to save this in order to work with the colors.
Thank you!

When you traced it I assume live Trace did you choose Grayscale as the preset in the Live Trace Options by any chance?

Canon i9900 color inkjet printer. Photos are printing with colors wrong. Is there a driver that works?

I'm using a new MacBook Pro/Mavericks and a Canon i9900 color ink jet photo printer. The colors are printing all wrong, it almost looks like a negative. Printing directly from the Canon 6D photos print just fine. Is there a work around for this? Canon says it's Apple's driver that is the problem. I've tried printing from PhotoMatrix Pro, Photoshop CC, PhotoElements CC, Preview, and all kinds of software but nothing seems to work. Any suggestions out there?

Someone please correct me if I'm wrong, but a printer must be consuming a little electricity for it to sense and respond to a command to turn on and print. Therefore, I suggest you forget buying a new printer with this feature and simply leave the printer you already have on all the time.
Just a thought!

I am trying to print a webpage in black ink only but it continues to be printed with colors.

Printer OfficeJet 6500 A. I am trying to print a webpage in black ink only but it continues to be printed in color. What settings must I use?

That was just my curiosity about the web browser. It has nothing to do with the printing issue.
Have you selected gray scale and tried reprinting yet?
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Printing with colored border?

I have been wishing for one simple thing since aperture came out...being able
to print with a black (or other color) border instead of white. Is there a simple way to do
this that I am missing? with photoshop its right there in the print controls where it allows you
to select a color for the border. is this a difficult feature to add? not sure why it wouldnt be there. apple seems to appreciate using a black background for web pages...why not for printing?

Try using the book tool - simply lay out a 'template' book with pages the size of your paper, and drag images into it when you want to print.
Unfortunately you don't get the print-specific sharpening, but the layout controls are pretty good.
Ian

I need to print with a number of copies set

Hi im trying to print with number of copies set but it dosent work.. I tried it on 3 different printers.
It only print 1 copie when i say 2 or 3 or 4...
(aset.add(new Copies(2)); )
Is there something missing in that code...
thanks
Here is my code.
import java.io.*;
import javax.print.*;
import javax.print.attribute.HashPrintRequestAttributeSet;
import javax.print.attribute.PrintRequestAttributeSet;
import javax.print.attribute.standard.Copies;
    public class Print {
        public static void main(String[] args) {
            try {
                // Open the image file
                InputStream inputStream = new BufferedInputStream(new FileInputStream("c:\\coupon.txt"));
                // Find the default service
                DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
                PrintService service = PrintServiceLookup.lookupDefaultPrintService();
                PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
                aset.add(new Copies(2)); // Dosent work only 1 copie is printed
                // Create the print job
                DocPrintJob job = service.createPrintJob();
                Doc doc = new SimpleDoc(inputStream, flavor, null);
                PrintJobWatcher pjDone = new PrintJobWatcher(job);
                // Print it
                job.print(doc, aset);
                // Wait for the print job to be done
                pjDone.waitForDone();
                // It is now safe to close the input stream
                inputStream.close();
            } catch (PrintException e) {
                System.out.println(e);
            } catch (IOException e) {
                System.out.println(e);
    }

Same problem here. I have found hundreds of questions in several places, but no answer.
Problem is that when I set the copies, PrintServiceLookup.lookupPrintServices returns no results.
Please help.

Printing with color management

This question was posted in response to the following article: http://help.adobe.com/en_US/illustrator/cs/using/WSfd1234e1c4b69f30d2a5051004d659b1c-7ff6a .html

You will need a printer which will print "Borderless" to print a full page; usually a Desktop Inkjet.

Need to PRINT with PANTONE spot colors - PROBLEMS

Hello!
This is my first post here.
I am from Poland and I designed artwork for a 12" vinyl. It is going to be pressed in the US and so will be the cover get printed there.
This is my first abroad work... So far when i wanted to use Pantone for printing i prepared the artwork in CMYK and just noted (for the printer) which Pantone spot colors should be used. This is how it works here in Poland. But when i sent my artwork like this to the US printing plant - i got a reply that this is wrong and i need to prepare the files for spot color printing...
I prepared the artwork in Photoshop CS4 and i put it on a template for printing in InDesign CS4.
Meanwhile i got to know how to make new spot channels in Photoshop, but when i want to place that file on the template in InDesign - i get a message saying that i can only import RGB or CMYK files...
I Need Your help!

yeah, i knew that.
i think i sorted it out now.
i think my mistake was that i tried to import PSD files. But later on i saved them as EPS files i could import them to InDesign with the spot colrs.
We'll see what the printing plant says.
Should be good now.

Need some help with color on a column.

Hello
I need some help on how I can set the color on either column header or the whole column.
I have a report with where the first row display a total sum. The rows under that are htmldb_item.text where the user may input some values.
The sum of these textboxes should match the the total column on top. If it does not match then the header or column should be marked red.
I have one pl/sql prosess where i check this, and i return a message for that column, can I in this prosess set the column color for the report?
report looks like this
total1----total2----total3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
so if the sum of all the box1s do not match total1 then column or header is red.
thanks,
Anders

Hi Anders,
have a look at Carls example: http://htmldb.oracle.com/pls/otn/f?p=11933:7:3740381051529350
It works with row template, but maybe you can change it for working with column templates.
chrissy

I need help printing with HP laserjet 2200 and OS 10.6

I need help setting up my HP laserjet 2200 and OS 10.6 -- I've downloaded and installed all the software and still can't print.

Hey jeo1951,
If you haven't already, try running through the recommended steps in the following article:
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
It should help you set up your printer.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Help Please! PNG cut out in Photoshop placed into indesign printing with colored box

I have cut out an shape in photoshop, saved as a png and inserted into an indesign file. When I print, a discolored box around the PNG appears. I have 5 total documents done the same way, only one is behaving this way. Happens when I print from PDF also.
I have attached an image, the other 4 in the set behave just fine. I am on a mac, printing to an HP.
Thanks so much!

I think you are a Windows user, but this AppleScript will get the embedded profiles of any placed pngs and update the png's Image Settings profile with its embedded profile:
tell application "Adobe InDesign CS6"
    tell active document
        repeat with x in links
            --the image
            set i to parent of x
            --check for pngs
            if link type of x is "Portable Network Graphics (PNG)" then
                --the png's path
                set fp to file path of x
                --use image events to get profile, faster than PS
                try
                    tell application "Image Events"
                        launch
                        set mypng to open fp
                        set n to name of profile of mypng as string
                    end tell
                end try
                set profile of i to n
            end if
        end repeat
    end tell
end tell

Photoshop Help | Printing with color management in Photoshop CS6

This question was posted in response to the following article: http://helpx.adobe.com/photoshop/using/printing-color-management-photoshop1.html

This is usually done in the printer driver's console.
What make/model printer do you have?
Good luck,
Hunt

TS1398 What app do I need to print with HP printer C309?

What is a good third party app for setting up my Ipad to print to my wireless HP printer C309?

You can also try the HP ePrint app. Here is a quick link with additional info and features.
Best of Luck!
I work with HP. However, my posts and opinions are my own.

Need to Print with color.

Similar Messages

Maybe you are looking for