Need to print worked hours saved with notes

i saved my timesheet with notes and now i need to print it.
Thanks
Art

With a note selected, at the bottom are the following options.
Email the note, delete the note, or forward to the next note available.
Select the envelope icon which will create an email for the note.
Address the email to an email address that you access with an email client on your computer.

Similar Messages

Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?

Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?

wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
Paul

Need to re work project saved in Adobe Premiere 5.1 (PC) on CS6 (MAC)

I need to re work project saved in Adobe Premiere 5.1 (PC) on CS6 (MAC). Thanks for any advice

You will probably need a PC version of Premiere Pro newer than CS3 in order to open the file, and then save it again as the newer version. From there you could possibly open that new version in CS6 on the Mac.

Officejet 6700 - printer works ok but scanner not recognised by computer

I have had my HP Officeject 6700 printer for 2 years and the printer works fine but now whenever I try to use the scanner it fails to work with a message 'we can't find a scanner attached to your PC' Have downloaded the HP doctor diagnostic but does not seem to do anything. Can anyone help?

Hi there @HpNepal , welcome to the forums
I understand your printer is not detected over your wireless network from your computer. Although you mentioned you have done some troubleshooting, I would also suggest trying the steps from the guide I have found and posted for you below. The printer should be found if all steps are completed in order. Good luck!
An 'Unable to Find the Printer' Error Displays for the HP Officejet 6500A and 7500A e-All-in-One Pri...
If you run into any issues, please respond back to me with the specific errors and results from the print and scan dr.
Take care
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer works for ipad but not laptop

My printer works fine with my ipad but stopped working with my laptop. I have windows seven. I put the IP address in the search bar and went to the hp site. I tried to print a page from there and it worked fine. But I can't get it to work on any other site or for WORD.

Hi Beckyls45,
Welcome to the HP forums!
I'm sorry to hear you haven't been able to print from your laptop recently, but I'd be happy to have a further look into things and see if I can help
Which model HP printer do you have?
Since you can get to the printer's Embedded Web Server (with the IP address in the address bar) you're still connected, but something seems to be blocking communication. I will suggest that you start with downloading and running the HP Print and Scan Doctor, and follow any diagnosis it may have to offer. If that says everything is fine or isn't able to resolve the issue for you, please just let me know.
Hope to hear back from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

HELP!!! need to print to video ASAP. NOT WORKING

Hey,
I've been trying to print to video a 3 hour piece, well, it's segments of many movies for a film festival. Anyway, i've used like 4 decks now, trying to capture on dvcam, and everytime i record something to tape, it just records like pink fuzz. i've tried using different firewire ports, and messed around with the settings. so does anyone know a sure fire way of allowing me to print to video?
Thanks,
Jared

I had this happen to me a couple of days ago, and this is what I changed:
I opened the Audio/Video Settings, then selected the A/V devices tab. Then I selected the Different Output for Edit to Tape/Print to Video check box and set the video to Apple FireWire NTSC and the audio to Firewire DV.
After doing changing these things the video signal was sent to the camera and I was good to go. Hopefully that's what you need to change.
Hope that helps.
jesse.

[SOLVED]Printer working in Ubuntu, and not in Arch

Hello,
Well, it's a little bit weird I bought a new printer, it's a Epson SX415.
Cups detects it as a Epson SX410, I tried to make it work with the following drivers:
So, with the CUPS+gutenprint drivers, it seems to work (cups says job sent) but the printer doesn't make a move. With the foomatic drivers, cups says:
stopped
"/usr/lib/cups/filter/foomatic-rip failed"
If it works with Ubuntu 10.10, I guess I'll be able to make it work under Arch, but currently I don't know how to do that :s
Thanks
Last edited by Lowra (2010-10-26 17:19:42)

Ubuntu is using the following driver:
Epson Stylus SX410 - CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)
I'll check AUR
EDIT:
[david@desktop ~]$ sudo packer -S epson-inkjet-printer-escpr
warning: epson-inkjet-printer-escpr is flagged out of date
Aur Targets (1): epson-inkjet-printer-escpr
Proceed with installation? [Y/n] y
Edit epson-inkjet-printer-escpr PKGBUILD with $EDITOR? [Y/n] n
==> Making package: epson-inkjet-printer-escpr 1.0.0-1 (Thu Oct 21 23:00:30 CEST 2010)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading epson-inkjet-printer-escpr-1.0.0-1lsb3.2.src.rpm...
--2010-10-21 23:00:30-- http://linux.avasys.jp/drivers/lsb/epso … .2.src.rpm
Resolving linux.avasys.jp... 202.41.220.57
Connecting to linux.avasys.jp|202.41.220.57|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2010-10-21 23:00:31 ERROR 404: Not Found.
==> ERROR: Failure while downloading epson-inkjet-printer-escpr-1.0.0-1lsb3.2.src.rpm
Aborting...
The build failed.
[david@desktop ~]$
Last edited by Lowra (2010-10-21 18:53:10)

Need Epson printer help asap please! *Not printing*

I have a Macbook and I am trying to wirelessly print to my epson rx680 and it doesn't work! bonjour seems to be the problem. any other way to add printers connected to an AE via usb? Thanks for your help!

BUMP

When I am given a link to a separate window, that is a pdf I need to print out, the websites will not load. The websites end in .pdfT

i need it to ask me if I want to open it in Preview, or save file.
I updated my firefox, and it no longer prompts this question. HELP!

See:
* https://support.mozilla.org/kb/pdf-files-are-blank-and-cant-be-downloaded-mac
* https://support.mozilla.org/kb/Opening+PDF+files+within+Firefox
Disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
*Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader
PDF files may also be found under another entry like Portable document.

Image Adjustments Not Saved with DNG?

It appears that the adjustments (i.e. all of the work you do to "develop" your pictures) are not saved with the image file. They appear to be saved in the LR Library. So if anything happens to your library, your developing work is gone. I thought my adjustments were saved with the DNG, but this does not appear to be the case.
So, to be sure that my work is saved with the image, it appears that the processed files must be saved to a different format like JPG, TIFF, or PSD. With JPG quality is lost, and your ability to edit is severely compromised. With PSD and TIFF, you have another copy of extremely large files to deal with.
Is my understanding correct?
What are your suggestions to deal with this?
Thank you.

Geoff and John,
Thank you very much.
You confirm the critical point that your work is saved in the Library, and the Library must be closely supervised and backed up.
Beside my on-site backups, I set up a Stuffit schedule to back up a daily version of my library. My current library is 57.6MB and Stuffit compresses it to 8.7MB and automatically FTPs it to my web site for archiving.
I found that my 2GB file of previews is unnecessary, since my computer creates new previews almost as quickly as it reads the preview file, at least on a folder basis. So, I removed my preview files, and I have them saved for only one day in prefrences.
For my DNGs, beside my on-site backups, I create a DNG with the RAW (NEF) file embedded and back them up on my web site. Then I create DNGs with Adobe DNG converter, without embedded RAWs (LR embeds the RAWs)to use for my working files.
One of the reasons I decided to use DNGs is to avoid having separate XMP files. However, it sounds like you can export the XMP to the DNG without creating separate XMPs. I'll look in to that. I assume that exporting the XMPs to the DNGs will allow me to open them directly in CS2 (not by exporting from LR) or other programs with my adjustments intact. This would solve the problem of losing adjustments if the Library becomes dysfunctional.
Thanks again.
Eric

Need total worked hours of each employee

Hi all
I need the total work hour for each employee
create table pde(empno number(10),act_hour varchar(10 byte));
Table created
insert into pde values(211,'12:20');
insert into pde values(211,'06:00');
insert into pde values(213,'07:00');
insert into pde values(213,'07:20');
WITH got_total_hours     AS
     SELECT SUM (   TO_NUMBER (SUBSTR (act_hour, 1, 2))
                + ( TO_NUMBER (SUBSTR (act_hour, 4, 2))
                  / 60
                ) AS total_hours
     from      pde
SELECT        TO_CHAR (FLOOR (total_hours))
     || ':'
     || TO_CHAR ( MOD (total_hours, 1) * 60
            , 'fm00'
             )     AS hh_mm,empno,act_hour
FROM     got_total_hours ,pde
this is the output i am getting
HH_MM EMPNO ACT_HOUR
32:40     211     12:20
32:40     211     06:00
32:40     213     07:00
32:40     213     07:20
i require    HH:MM EMPNO ACT_HOUR
               18:20 211      12:20
               18:20 211      06:00
               14:20 213      07:00
               14:20 213      07:20
kindly help meThanking in advance
regards,
oracleuser

Hi Ravi,
Your solution works perfectly fine but there is a prob when i incorporate ur solution in the main query
WITH temp AS
(SELECT employee_number,
    act_hour   ,
    SUM(to_number(regexp_substr(act_hour,'[^:]+',1,1))*60+to_number(regexp_substr(act_hour,'[^:]+',1,2))) over (partition BY employee_number) tot
     FROM nap_PUNCH_DATA_EMP_LIST trn where DATE_ENTRAY between '23-Aug-2009' and '24-Aug-2009'
SELECT employee_number,act_hour,ROUND(tot/60)||':'||mod(tot,60) tothours FROM temp
o/p i am getting is
EMPLOYEE_NUMBER     ACT_HOUR             TOTHOURS
408                            06:31                         07:31
408                            00:00                         07:31
410                            18:12                          30:59 ------SUM of 18:12 and 11:47 should be 29:59
410                             11:47                          30:59
this is working correctly for majority of employee_numbers with exception of some employee_numberskindly help
regards,
oracle user
Edited by: makdutakdu on Jan 4, 2010 12:45 PM

I need to print and the printer doesn't show

my printer does not show up in the bluetooth sectino it is due tomorrow and the thing i need to print cant be saved.

I suggest you reset the SMC (with the printer off). Then restart and plug the printer in. It should be "found."
Barry
Whatever cannot be saved should be cut/pasted and then E-mailed to yourself.

Worked hours code

Hello everyone,
I need some help with an ABAP code:
I have records coming in with Employee ID, Date and Worked hours along with some other fields.
I need to look up the employee id against another table to figure out if the employee depends to a particular region or not and the date is holiday or not from different table.
Also I would like to see if worked hours are more than 8 and put the extra hours into a differemt field for calculating if the total hours in a week exceed 40.
Can you please help with this code?

Sorry. here the Post again (complete )
Hi Raj Coppar,
try this code:
this should be implemented in the End-Routine if you're working with BI 7.0.
first you need to define the internal tables that have same structure as table where comparing information is stored.
Code:
Data: it_table TYPE TABLE OF /n42/YOURTABLE,
 li_table LIKE LINE OF it_table.
DATA:
 KALENDER LIKE SCAL-FCALID,
 with_ATTRIBUTE LIKE SCAL-INDICATOR,
 lc_holiday_found LIKE SCAL-INDICATOR.
DATA: BEGIN OF FEIERTAGE OCCURS 5.
 INCLUDE STRUCTURE THOL.
 DATA: END OF FEIERTAGE.
*Store needed information for comparison
select * from /n42/YOURTABLE into table it_table.
sort it_table by /n42/employeeID.
Loop in the Data_PAckage
LOOP AT SOURCE_PACKAGE ASSIGNING <source_fields>.
*Check if Date is a Holiday
 CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
 EXPORTING DATE = <source_fields>-Date.
 HOLIDAY_CALENDAR_ID = KALENDER
 IMPORTING HOLIDAY_FOUND = lc_holiday_found
 TABLES HOLIDAY_ATTRIBUTES = FEIERTAGE
 EXCEPTIONS HOLIDAY_CALENDAR_ID_MISSING = 1
 DATE_AFTER_RANGE = 2
 DATE_BEFORE_RANGE = 3
 DATE_INVALID = 4
 HOLIDAY_CALENDAR_NOT_FOUND = 5.
*read internal table and make your checks
READ TABLE it_table BINARY SEARCH INTO li_table
 WITH KEY /n42/employeeID = <source_fields>-/n42/employeeID.
if record was found.
 IF sy-subrc EQ 0.
*if region is.....
 if li_table-/n42/REGION = "Whatever" and
*Date is a Public Holiday
 lc_holiday_found = 'X' .
*Claculate Overtime
 if <source_fields>-Hours > 8.
*write overtime to Overtime Field
 <source_fields>-overtime = <source_fields>-Hours - 8.
 endif.
 ENDIF.
modify Result_Package.
endloop.
hope this helps.
BR,
Younes

Code for employee worked hours calculation

Hello everyone,
I need some help with an ABAP code:
I have records coming in with Employee ID, Date and Worked hours along with some other fields.
I need to look up the employee id aginst another table to figure out if the employee depends to a particular state or not and the date is holiday or not from different table.
Also I would like to see if worked hours are more than 8 and put the extra hours into a differemt field for calculating if the total hours in a week exceed 40.
Can you please help with this code?
Thanks,
Raj

>
Raj Coppar wrote:
> Hello everyone,
>
> I need some help with an ABAP code:
>
> I have records coming in with Employee ID, Date and Worked hours along with some other fields.
>
> I need to look up the employee id aginst another table to figure out if the employee depends to a particular state or not and the date is holiday or not from different table--- u can use FM BKK_CHECK_HOLIDAY to find out the given date is holiday or not ? Also I would like to see if worked hours are more than 8 and put the extra hours into a differemt field for calculating if the total hours in a week exceed 40.
>
> Can you please help with this code?
>
> Thanks,
> Raj

Need help printing tiff files

I have written some code that prints any file that can be opened using JAI and the ImageIO Tools. The code works good for me but I have some special cases where I am having some difficulty. Some files I need to print are TIFF files with many pages. Some are compressed using Fax Group 4 encoding and others are compressed using OLD jpeg-in-tiff. I can read and print the files just fine, but it takes about 2 seconds to print each page. Also the spooling data for 88 pages is 900 MB in size. Printing the same files using IrfanView takes <1 seconds and the spool file is much smaller (equivalent to the size of the uncompressed tiff) The speed and size issues are problems for me because I am working on a print web service. My code to render each page is below. So far I have tried rendering hints and such to increase speed, but I think the problem is that when I read the image it takes up a lot of space in memory.
Here is the overall requirements for what I am doing: A use will request that the server print a set of files (mixed image formats, restricted to TIFF, JPEG, and GIF) be printed to specific printer as a single print job. They can specify copies and collation only. The service will open each file in order and send its data to the printer. I have created a custom class that implements the Printable interface to handle the multiple files. The class below is created for each file and handles the printing of the image file.
I am using JDK 1.4.2 and WebSphere. I am stuck with these options b/c I have to use some IBM API's (IBM Content Manager 8.3) that are not compatible with 1.5 or higher.
Is there any way to speed up my code. Possibly load the image differently?
import java.awt.Graphics2D;
import java.awt.RenderingHints;
import java.awt.geom.AffineTransform;
import java.awt.image.BufferedImage;
import java.awt.print.PageFormat;
import java.awt.print.Printable;
import java.awt.print.PrinterException;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.FileImageInputStream;
import javax.imageio.stream.ImageInputStream;
public class ImagePrinter2 implements Printable
 public static final int PAPER_SIZE_LETTER = 0;
 public static final int PAPER_SIZE_LEGAL = 1;
 private final ImageReader reader;
 private final int _pageCount;
 private final File imageFile;
 private int _pageOffset;
 public ImagePrinter2(File imageFile) throws IOException
 this.imageFile = imageFile;
 ImageInputStream fis = new FileImageInputStream(this.imageFile);
 reader = (ImageReader) ImageIO.getImageReaders(fis).next();
 reader.setInput(fis);
 _pageCount = reader.getNumImages(true);
 public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 BufferedImage image = null;
 int currentPage = pageIndex - getPageOffset(); //pageIndex is for the overall job, I need the page in this file
 int imgWidth = 0, imgHeight = 0;
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 try
 image = reader.read(currentPage);
 imgWidth = image.getWidth();
 imgHeight = image.getHeight();
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (imgWidth > imgHeight)
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.setRenderingHint(RenderingHints.KEY_RENDERING, RenderingHints.VALUE_RENDER_SPEED);
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((imgWidth > imgHeight)
 ? (pf.getImageableWidth() / imgWidth)
 : (pf.getImageableHeight() / imgHeight));
 //check the scale ratio to make sure that we will not write something off the page
 if ((imgWidth * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / imgWidth);
 else if ((imgHeight * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / imgHeight);
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (imgWidth * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (imgHeight * scaleRatio)) / 2);
 else
 drawX = (int) (pf.getImageableWidth() - imgWidth) / 2;
 drawY = (int) (pf.getImageableHeight() - imgHeight) / 2;
 AffineTransform at = AffineTransform.getTranslateInstance(drawX, drawY);
 if (scaleRatio < 1)
 at.scale(scaleRatio, scaleRatio);
 g2.drawRenderedImage(image, at);
 g2.dispose();
 image = null;
 return PAGE_EXISTS;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageCount()
 return _pageCount;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageOffset()
 return _pageOffset;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @param i
 protected void setPageOffset(int i)
 _pageOffset = i;
 * Release the reader resources
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 public void destroy()
 try
 ((ImageInputStream) reader.getInput()).close();
 catch (Exception e)
 reader.reset();
 reader.dispose();
 * Helps release memory used when printing (seems to be a 1.4.2 thing)
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 public void reset() throws FileNotFoundException, IOException
 try
 ((ImageInputStream) reader.getInput()).close();
 catch (Exception e)
 reader.reset();
 ImageInputStream fis = new FileImageInputStream(imageFile);
 reader.setInput(fis);
}

I found a couple of issues. One was related to code the other to IBM. AS for the code I found an article about drawing scaled images here: http://today.java.net/pub/a/today/2007/04/03/perils-of-image-getscaledinstance.html which was quite useful. My updated code is below. The second issues is that the JRE I am using is the IBM Websphere 5.1 JRE which pretty much sicks. I tested using a Sun statndard 1.4.2 JRE and the print was 5 times faster. Now I am looking to find a way around that issue, but it is not a questions for this form.
public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 BufferedImage image = null;
 int currentPage = pageIndex - getPageOffset(); //pageIndex is for the overall job, I need the page in this file
 int imgWidth = 0, imgHeight = 0;
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 try
 image = reader.read(currentPage);
 imgWidth = image.getWidth();
 imgHeight = image.getHeight();
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (imgWidth > imgHeight)
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.setRenderingHint(RenderingHints.KEY_RENDERING, RenderingHints.VALUE_RENDER_SPEED);
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((imgWidth > imgHeight)
 ? (pf.getImageableWidth() / imgWidth)
 : (pf.getImageableHeight() / imgHeight));
 //check the scale ratio to make sure that we will not write something off the page
 if ((imgWidth * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / imgWidth);
 else if ((imgHeight * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / imgHeight);
 //find the scaled width and height
 int scaledWidth = imgWidth, scaledHeight=imgHeight;
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (imgWidth * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (imgHeight * scaleRatio)) / 2);
 //new code to set the scale
 scaledWidth = (int)(scaledWidth * scaleRatio);
 scaledHeight = (int)(scaledHeight * scaleRatio);
 else
 drawX = (int) (pf.getImageableWidth() - imgWidth) / 2;
 drawY = (int) (pf.getImageableHeight() - imgHeight) / 2;
/*don't need transform
 /*AffineTransform at = AffineTransform.getTranslateInstance(drawX, drawY);
 if (scaleRatio < 1)
 at.scale(scaleRatio, scaleRatio);
 g2.drawRenderedImage(image, at);*/
 //use scale instance of draw image
 g2.drawImage(image, drawX, drawY, scaleWidth, scaleHeight, null);
 g2.dispose();
 image = null;
 return PAGE_EXISTS;
 }Edited by: jloyd01 on Mar 7, 2008 1:35 PM

Need to print worked hours saved with notes

Similar Messages

Maybe you are looking for