Need to puchase seperate license for different versions of ORACLE

Hi,
My client wants to install Oracle 10G & Oracle 11G.
Does he have to puchase 2 license seperately for each of ORACLE versions?
Any prompt response would be highly appreciated!
Regards,
Geetanjali

The caveat before accepting licensing advice from some random fella on the internet: It should always be confirmed by contacting Oracle sales.
The main question is probably whether the client intends to install both versions on the same hardware or on separate hardware. One hardware = one license. Separate hardware = separate licenses.

Similar Messages

  • Do I need to purchase 2 licenses for my computers in different platform?

    1. Do I need to purchase 2 licenses for my computers in different platform? One is desktop in windows, another is macbook pro.
    2. Is it possible for me to install cs6 on more than one computer by using one license?
    Thank you.

    If you buy the perpeptual license then it would be OS specific , in that case you would have to buy 2 seperate license however If you go for the Creative Cloud then in that case it would be OS independent , you can install with creative cloud on 2 Windows or 2 Mac or 1 windows and 1 Mac.
    Also , with each license you get 2 activation hence 2 can use the software on 2 machine but not at the same time.

  • Licenses for education version of photoshop

    Hello.
    I do not anderstand how and how many licenses I can buy for my college...what is the price for 25 students and one teacher for exemple?
    sinderely
    Y.P

    Thank you..but I do not have regional reseller....And I do not know 
    how and where I can find one .
    I just need some help to anderstand where I can buy some licenses for 
    my college and the price.....there is nothing about on your sites...
    Le 23 sept. 12 à 11:52, Mylenium a écrit :
    Re: licenses for education version of photoshop
    created by Mylenium in Photoshop General Discussion - View the full 
    discussion
    Perhaps this may help:
    >
    Education FAQ
    >
    In any case, you need to contact your regional reseller/ Adobe 
    subsidiary for this kind of stuff.
    >
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. 
    If you want to embed a screen image in your message please visit the 
    thread in the forum to embed the image at http://forums.adobe.com/message/4720140#4720140
    Replies to this message go to everyone subscribed to this thread, 
    not directly to the person who posted the message. To post a reply, 
    either reply to this email or visit the message page: [http://forums.adobe.com/message/4720140#4720140
    To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/4720140#4720140
    ]. In the Actions box on the right, click the Stop Email 
    Notifications link.
    Start a new discussion in Photoshop General Discussion by email or 
    at Adobe Community
    For more information about maintaining your forum email 
    notifications please go to http://forums.adobe.com/message/2936746#2936746

  • HT1660 Can I create a 2nd iTunes account on one PC that caters for two seperate devices for different people?

    Can I create a 2nd iTunes account on one PC that caters for two seperate devices for different people?

    For what reason would you do that?
    Simply connect the device, select the content desired to sync and sync.
    iTunes remembers the sync profile per device.

  • I need to buy a license for Flex Builder 2.0 as I do?

    I need to buy a license for Flex Builder 2.0 as I do?

    The Airport built-in to the iMac is exactly the same standard as that used in PC's 802.11b/g compatible and possibly 802.11n as well depending on the model. It means that anywhere you use can use a PC for wireless you should be able to use the iMac. It sounds as though your wireless network is protected with a WEP Key or similar encryption method and you have not entered the correct key into the iMac when attempting to join the wireless network or have not selected the appropriate key type from the drop down list. Quite a common situation is that if your password for your wireless network is a hex key, i.e only contains the numbers 0-9 and letters A-F then you need to select WEP Hex Key as the password type when joining the wireless network not WEP Password.

  • DOCUMENT IS LICENSED FOR DIFFERENT ACCOUNT

    Bought EPUB book off of B&N site for my Pandigital Reader, trying to read it on my computer. I keep getting message "DOCUMENT IS LICENSED FOR DIFFERENT ACCOUNT" . I followed directions in another thread to fix issue and I still get error message
    How do I find out WHAT account document CAN be read on? I have 2 diff emails attached to this ADOBE DIG READER & neither of them will allow me to read this book!
    This is WILD! As wild as not being able to unlock DRM books to read on diff devices or convert to PDF
    Anywho, is there a way to find this out (what account I CAN read it on?)
    Thank you for any help you can give me

    I am having the exact same problem! I cannot move my B&N books for my Pandigital into ADE!  I have changed everything so that all of my log ins are exactly the same, I have uninstalled and re-installed everything Adobe. I have authorized, de-authorized and re-authorized!! Someone help!!

  • Multiple License for different Labview version

    A coworker is trying to tell me that he read somewhere on the NI forums or knowledge base that with a multiple license it is possible to use
    the maximum number of licenses on EACH version of Labview.  That is, if there are 5 licenses available that there could be 5 copies of 8.5 and 5 copies of 9.0, etc. available for concurrent use.  That seems pretty unlikely to me.  Can someone clarify? 

    Hi Over_Nyquest,
    If you have a single license then the different license types are the different options you have for using the software. So, you could use your single license as a "Computer-Based License" and only activate it on one computer for multiple people to have access to. The other option you have is to use it as a "Named-User License" and install it on 3 computers in different locations for your use. For instance, you could install it on your personal PC/laptop, your office computer, and your labroom computer. This is designed for your use only and will allow you to use LabVIEW at different locations during the day.
    -Jake B.

  • Teststand deployment utility used for different versions of TestStand

    I am in a situation where I developed a test sequence in TestStand 3.5 and used the deployment utility to deliver an installer to a customer with TestStand 2010 Base deployment Engine.  We are seeing the following error "This installer installs file to the TestStand directory.  You must first install TestStand or the TestStand runtime engine version 3.5 to create the TestStand directory."
    My question becomes, is it even possible to make an installer with TestStand 3.5 and have someone else use with TestStand 2010 Base deployment engine?  What then needs to happen to get past the error if it is possible?
    Thanks,
    Bill
    John 3:16

    No you cannot use 3.5 sequences on the 2010 engine.
    You need to install the 3.5 engine on that machine.  The license will still work and you will need to use the version selector to go between the two.  You can include the engine in your installer build.
    TestStand is a scripting language.  Because sequence files are not compiled it is possible to use unsupported functions on the wrong version.  Therefore, the engine just won't run other versions.  Also, you need to switch versions because they use different adapters, engines, dlls, folders, etc...  The version selector changes settings on your machine for all those things for that version.
    Hope this helps,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • How can I distribute an application using Reprot generation Toolkit for MS Office for different versions of MS Office?

    I want to create an application which uses the Report Generation Toolkit for Microsoft Office. The office version of the target machine depends on what my customer has installed.
    From several discussions I have seen that the installer detects which version I have on my development machine. I'm not able to hold three or four machines with different versions (97,2000,2002,XP).
    I decided to do the following software architecture:
    I create a LLB MakeReport.llb with a VI called MakeReport.vi. With VI server I will start MakeReport.vi in MakeReport.llb. Over a named queue I will send a command from my application to MakeReport.vi. Then the report will be
    printed.
    I will create this LLB by saving MakeReport.vi with File>>Save with options...>>Application distribution. All neccessary VIs will be in the LLB.
    I will hold different directories for each version. I can create different version of the LLB. During installation of my application the LLB for the right version will be copied from the CD to the application folder.
    I know I will be restricted in testing my report in only one version and hoping it will be good in the other versions.
    I think that the difference lays only in the word and excel related llbs.
    1. Will my software architecture work or is it obviously wrong?
    2. How will I get all versions from the toolkit CD?
    3. Which is the registry key I must read to get the right version (a minor question, if somebody knows I do not need to search for myself).
    Waldemar
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

    Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
    Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
    Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
    I have attached examples of the files I am working with to help you better understand what I am trying to do.
    I hope that makes sense.
    Jason Phillips
    Attachments:
    HourlyTotalsTemplate.xls ‏120 KB
    eb_rain_gauge_ss.csv ‏23 KB
    EastBankHourlyRainReport.xls ‏28 KB

  • Can i set up my drive as encrypted with different partitions for different versions of osx?

    i have some questions about setting up an encrypted drive with different versions of osx installed on separate partitions, and how this choice effects time-machine and the emergency recovery disk.
    I have a new/refurbished macbook pro with a SSD.  it already has mavericks installed.  i want to fully wipe the drive and reinstall everything my self because I'm odd like that.
    first wiping the current drive
    Does the recovery partition get wiped if i use disk-utility to reformat the drive. Even thought the recovery partition does not show up as a partition, when i look at it with disk-utility? i would like to know I've wiped all partitions so that no little bugger gets left with out me knowing. Disk-utility does not show the recovery partition and this makes me concerned it might not wipe it.
    Does mavericks automatically make a recovery partition during the installation process? Or do i need to make a new 1gb partition for the recovery disk?
    Can i have two different partitions on my drive with separate installations of OSX on it? (one for work that i don't update the system os till my current project is done, and the other for experimenting with new software.)
    will time machine back up both of the partitions or just one?
    can i accomplish all this from a bootable usb drive or do i need to do this in target disk mode? 
    do i need to use a more capable utility than the stock apple "disk-utility"?
    when reformatting the drive should i format it as encrypted or let file vault do this after i install mavericks?
    how much does encryption slow down performance for things like photo/video/music production?

    Do a backup before you do anything.
    Does the recovery partition get wiped if i use disk-utility to reformat the drive
    It shouldn't
    Does mavericks automatically make a recovery partition during the installation process?
    Yes.
    Can i have two different partitions on my drive with separate installations of OSX on it?
    Yes.
    will time machine back up both of the partitions or just one?
    It will as long as one partition is not excluded in the Time Machine/Options.
    do i need to use a more capable utility than the stock apple "disk-utility"?
    No, just boot into the Recovery Volume (command  - R on a restart).
    file vault do this after i install mavericks?
    I would let File Vault do that.

  • Acrobat 9 & X License for older versions

    I have several employees here, some using Acrobat 9 Professional, others using Acrobat X professional, both of whom are experiencing the same issue: toolbar buttons are disappearing, and Acrobat is crashing shortly afterwards.  This is a known issue, and has been acknowledged in the Product Support forums, but (from what I can tell) Engineering is not expected to have the problem fixed until the next patch release, happening sometime in May/June.
    However, this doesn't really help me, as these people are experiencing crashes as frequently as every 5-10 minutes, and "...when you see the buttons start to disappear, immediately save your work and restart Acrobat" is a huge disruption to their work process.
    My question is:  is it possible (and permissible) to use these licenses for versions 9 and X to install Acrobat 8 Pro?  There are other employees here using this version, and working on the same files, that have not reported any problems related to this issue.  I was unable to find any information on this from looking through the EULA and forums.

    Hi Sheldon, serial numbers for one version won't work for another, so that's something that probably only Adobe itself could help you with (try contacting Customer Service).
    They may or may not be able to help - but if you think you'd only need 30 days using an older version, one option would be to install the free trial for Acrobat 8.  You could ask if they still have that to offer.

  • Robohelp - TFS Mapping issue for different versions

    Hi,
    I'm using Adobe Robohelp 9 with Team Foundation Server 2012 on Windows 7 -  64 bit. I've also installed Microsoft Visual Studio Team Foundation Server 2012 MSSCCI Provider. I've mapped all the project folders on my machine. We create HTML help (.chm) for our application.
    I have different versions for each module of our entire product on Team Foundation Server 2012 (As we have multiple modules in our product), for example x+1, x+2, x+3 and so on.
    Each module has different Robohelp projects for every version/branch. This means, if the Online help for any module from any version is changed, we update it in the respective version of the Online help project.
    When we move on to the next version, due to binary files, the next version contains the same path and properties of previous version. We need to have different project for single module for the next version. For this, I have changed the TFS project path of every .xpj project for every version. For example, if I'm working on version x+2, then I've changed the TFS project path from x+1 to x+2 manually on x+2 version/branch and then started working on it.
    As these Robohelp projects (for each module) are mapped to my local folder on C drive, it shows a single workspace mapped with same path on my machine. This should be the ideal condition for my all projects as follows:
    But sometimes when I try to update any file from version x+2 and then check-in my changes, the changes are getting checked-in to the previous version, i.e. x+1. And if I see the workspace of the x+1 version, it shows one more wrong workspace added below the correct one. This new workspace contains the Source control folder path of x+1 version and the Local folder path of x+2 version. That means, my robohelp project folder of x+2 version from my local drive is getting mapped to TFS folder of version x+1. That is why all the changes done in Robohelp project files from x+2 version are going in to x+1 version.
    The strange here is when I try to check-in my changes in x+2, it shows the correct path of x+2 version. But they all go to x+1 version, which should not happen.
    If anyone can help me in this problem, it would be a great help!
    Thanks in advance and waiting for solution,
    Dipali

    So, if I understand correctly, you create a duplicate of the project and
    check that in on a different location in TFS. That is the way to go.
    My guess is that the XPJ still references the old version's path. Try
    checking out the XPJ with TFS and open in with notepad. Search for
    'vc::cookie'. Check that the path there points to the correct path of
    the project in TFS. It probably still references the old path and so
    RoboHelp will check it in at the old path.
    Kind regards,
    Willam

  • Cannot download device name license for mac version

    I'm having problem when i try to deploy a installer for Mac version.I download CCPLauncher for Mac.When i launch it i only can select Serial Number License & Named License its different from Windows version which is i can download Device Named License.Can ur team help me ASAP because i have to deploy to 24 sites around Malaysia by next week.And for your information I'm buy a education licensing.

    Packager Links https://forums.adobe.com/thread/1586021
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  • Unable to install a license for NSC version 1.1.1.24

    I installed the new ncs version (1.1.1.24-small), with success. Later I will use a  temporary license for testing.
    I use the licing center and get a license but I get allways following message : "UDI of file not match the system"
    Following parameters : Product ID : PRIME-NCS-VAPL Serial : NCS-NXO:9FBA93C0-BED2-11E1-9289-005056915852
    If I type on Console show usi I get following output : SPID: Cisco-VM-SPID, VPID : V01, Serial D31CEGK4RH6 
    I try ít repeatedly allways the same output.
    Ulrich

    Ulrich:
    Text format of the license seem to show correct UDI:
    HOSTID=HOSTNAME=PRIME-NCS-VAPL:NCS-NXO:9FBA93C0-BED2-11E1-9289-005056915852
    I'll try to compare with another similar format license (different product though) and get back to you.
    Amjad

  • Could there be independent VI paths for different versions of LabVIEW?

    Hello,
    When jumping between different versions of LabVIEW (6.1, 7.1, 8.5) it is annoying that the current path for one becomes the current path for the other. 
    If I am working with LV 7.1 in a folder dedicated to 7.1 VI's, and then open LV 8.5, I don't want 8.5 to go to that 7.1 folder by default.  Alternately. if I was working in LV 8.5, closed it out, and then I click on a 7.1 VI, I don't want it to open in LV 8.5. 
    I've tried changing the path options in each version of LabVIEW, but that doesn't seem to help.  Is there any way of isolating these folder paths from one another?  One of our newer LV guys accidently opened some 7.1 code in 8.5.1 and then saved it.  Luckily, I had archived code to return to, but it could have been a disaster.
    Thanks for any ideas,
    McSynth

    You're actually asking two different questions.
    The first question has to do with which version of LabVIEW gets launched when you double-click a file. This is an operating system thing. The one that gets launched is the last one that got used. (Your first question will be: can this be changed? Answer: Change the operating system. Or, play around with the registry each time you quit out LabVIEW.)
    The second question has to do with search paths. These are independent. However, a VI will contain information about its subVIs in terms of where to find them. This is not a function of LabVIEW, as it is a function of the VI. Thus, it will make no difference which version of LabVIEW you use to open the VI. You can, if you wish, modify the search paths that LabVIEW uses to find VIs for each version of LabVIEW from the Tools->Options menu. However, this will not eliminate the problem, and your best bet is to keep those backups frequent.

Maybe you are looking for