Need to purchase a console cable for a SRW248G4

I have a client with a SRW248G4 installed.  We cannot determine the IP address assigned to the switch and we need to configure the ports.  The client cannot find the console cable that came with the unit and I have been unsuccessful in finding where I can buy one.  Anyone have any ideas?
Thanks!
Solved!
Go to Solution.

Thanks!  I called Ciso tech support and I asked where I could get a cable, if it was proprietary, etc.  His response was for him to help me, I would have to send the ENTIRE switch to them as an RMA and they would send me out a new switch that had the cable included.  I found one at Newegg, now that I know it uses a standard cable.

Similar Messages

  • I've installed Visual Studio Enterprise 6.0, Which edition of Visual Studio 2013 does the i need to purchase as the legalization for Visual Studio Enterprise 6.0?

    I've installed Visual Studio Enterprise 6.0, Which
    edition of Visual Studio 2013 does the i need to purchase as the legalization for Visual Studio Enterprise 6.0? 

    Hi,
    Here is a topic for MS Visio forum, you'd better post your question to Visual Studio forum.
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=visualstudiogeneral&filter=alltypes&sort=lastpostdesc
    Thanks for your understanding.
    Regards,
    George Zhao
    TechNet Community Support

  • We have two Mac laptops, does anybody know if you need to purchase the Lion upgrade for both?

    We have two Mac laptops in the household, does anybody know if you need to purchase the Lion upgrade for each?

    No. You only pay for Lion once and can then install it on all of your household Macs.
    Purchase Lion in the App Store using one of your Macs and the install button will appear for Lion under the Purchases tab when you open the App Store with your other Mac. The App Store will ask for your user name and password to install Lion but won't charge you for the second install. If you have more than one iTunes account use the one that you used to purchase Lion. All apps in the App Store work this way.

  • Do I need to buy any extra cables for the airport express??

    I was wondering if i need to buy any extra cables for the airport exprees.what kind of cables do i have to get to connect the airport express to my DSL modem?

    Typically all you would need is an Ethernet cable (cat5, rj45 end), and it would be connected to the LAN port on the DSL modem, and the Ethernet jack on the AP Express.

  • I need to purchase a power cord for my intel based 27" iMac.  I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

    I need to purchase a power cord for my intel based 27" iMac.  I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

    iMacs take generic power cords. If it fits into the back of the iMac and an electrical socket, it'll work.
    Good luck.
    Dr. C.

  • Is there any alternative to console cable for pix 501 firewall?

    I need help on CISCO PIX 501 Firewall, it comes with console cable having serial port, but systems now a days & the one i am having are not having serial port so i am not able to access command-in-line , is there any alternative way, can it be accessed using ethernet or lan wire, if so please provide steps, waiting for your valueable responses, ...

    Hi,
    Have you considered getting an USB adapter for the Console cable?
    I had to get that for my first work laptop since they happened to order a model without the serial port. For the most part it worked just fine.
    I guess depending on your PIX configurations you might be able to boot it up and attach a PC directly to it and manage it.
    - Jouni

  • HT201343 I need to get external connection cables for macbook air to imac - is this just a thunderbolt to standard usb?

    My screen is busted and i need to backup information/ upgrade system to icloud drive.
    To do this, i need to use an imac display - can i connect this with the standard thunderbolt to usb cable?
    I do not have apple tv, and may not work since i cant see the screen on laptop.
    Thanks,

    You need to connect the Thunderbolt cable to a Thunderbolt port or Mini DisplayPort to use Target Display mode; the iMac model also needs to support video in. Click here for more information.
    You need to connect the Thunderbolt cable to a Thunderbolt or FireWire port to use Target Disk mode. When in this mode, the computer can be treated as an external drive.
    If the connection involves USB at any point, it won't accomplish anything.
    (116521)

  • Can I upgrade from CS5.1 to CC or do I need to purchase a new product for PS

    About three years ago I purchased the student version of PS which came with MANY other items including Ai, Dw, Fw, Br, Fb, Fc,and Ct.  I mainly used Dw and Ps for website development. I was wondering if there is an upgrade for Ps to the new CC version or do I need to purchase a whole new product.  I'm also looking for a student version.  Does anyone have any suggestions?  Thanks in advance.

    CC is a subscription mode.  I know of no prior requirement to subscribe, just subscribe.

  • Console cable for WAE 574

    Hi all,
    Does anybody have a serial console cable, and showing how 9 pin in both end should go to?
    Jan Rockstedt    

    Hi Jan,
    I ran into the same issue and there is little info on the pins. Purchased blank DB9 to RJ45 backshells and created our own. The pins below work with the Rollover cable conected to it to manage via Console 512/612.
    RJ45
    DB9
    1
    N/C
    2
    N/C
    3
    3
    4
    5
    5
    5
    6
    2
    7
    N/C
    8
    N/C

  • Console cable for SRW2048

    I have lost the original console cable to the Cisco Linksys SRW2048 and was wondering if I can use the Cisco console cable or can a regular serial cable with female ends will work?
    Thanks,
    Stanley

    Hello Stanley,
    A cisco console cable probably won't work since they usually have RJ-45 on one end.  However, a regular serial cable should work just fine, as long as your computer has one as well, or you have a USB to serial adapter.
    The settings for the console port are as follows:
    Bits per second: 38,400
    Data bits: 8
    Parity: None
    Stop bits: 1
    Flow control: None
    Once you open the connection you'll have to hit enter once to make anything display.
    You can also acces the console of this switch through telnet, by connecting to the switches IP with a telnet client and use admin as the username with a blank password.
    I got most of this info from the admin guide, which is available here:
    http://www.cisco.com/en/US/docs/switches/lan/csbms/srw2048/administration/guide/SRW-US_v10_UG_A-Web.pdf
    Let me know if that works,
    Christopher Ebert
    Network Support Engineer - Cisco Small Business Support Center

  • I have a new macBook Pro 15 and need to purchase best, easiest usb for backup - help please

    I have a new MacBook Pro 15" and need to purchase the easiest, cost-effective USB for backup.  I have never done a backup and don't know what to buy.  Thanks much from an obvious novice.

    Look at these two links to OWC products.  Note that one is for enclosures only so an appropriate HDD would have to be added.  This at least should give you an idea of what is available.
    http://eshop.macsales.com/shop/USB2/OWC_Express
    http://eshop.macsales.com/shop/firewire/on-the-go
    Ciao.

  • Do you need to purchase Application Server license for WebCenter Suite?

    Before the BEA product merger, WebCenter was sold as a separate license on top of the Application Server license. Now with the new pricing of 125K, does this mean you have to pay for a separate App Server license or is the new pricing included with an App Server license?

    Appserver licenses need to be purchased separately

  • Do I need to purchase the Creative Cloud for team? even just for two single products?

    I work in a small company.
    There are 15 computers in my office.
    My boss wants to install Adobe Creative Cloud products on two computers among those 15 computers.
    Which means, my company need to buy two CC products.
    In this situation, does my company have to buy two CC products for business licensed? or just personal licensed product is okay?
    I wonder which one should I purchase for my company as a legitimacy perspective.

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each
    BUT... that is an individual license, not a "group" license, so you MAY need to read below
    -http://www.adobe.com/creativecloud/buy/business.html
    -team plans https://creative.adobe.com/plans?plan=team
    -manage your team account http://forums.adobe.com/thread/1460939?tstart=0

  • I need to purchase a power chord for imac

    Help me purchase a new power chord for imac (2009)

    How about Gmaj with diminished 7th?
    Or did you mean cord?
    You can get an IEC C13 (D-shaped socket) from any electrical or electronics retailer.
    Loads on Amazon. I got mine from B&Q Spares (a UK hardware store).
    Available in lengths up to around 3m.
    If it's a G4 iMac you need the 'cloverleaf' aka 'mickey Mouse'  socket IEC C5

  • Console cable for catalyst 5500

    I have just acquired 2 catalyst 5500's. I have a Cisco rollover cable that I have used to console into the 1200 series wireless access points and used it on 2 catalyst 2900 xl's, but I am unable to console into the 5500's. Does it require a different type of cable? Or different settings for the hyperterminal session?

    Hi Friend,
    I believe you are having sup 3 in your cat5k switch..can you try straight cable ..a normal straight cable.
    HTH
    Ankur

Maybe you are looking for

  • Screen light auto turn dark when I use program/web with background dark in windows 8.1

    Hi there, I used HP Pavilion dv6t-6000 CTO Quad for 3 years. CPU: Intel core i7-2630QM GPU: AMD Radeon 6490m It build in windows 7 and I manual install ( fresh install ) windows 8. It's fine. But when I upgrade to windows 8.1, it have an issue and I

  • 2 months in still no phone!!!

    I ordered my phone line on the 28th for march and paid a years line rental up front got an activation date of the 7th april perfect i thought. 7th april arrived got a phone call from openrech to say they were on there way. 1 hour later the engineer t

  • Select statement fails under Express, but works under Fortewhen using

    Express sometimes (e.g. with nested windows) generates SQL with a select subquery, e.g. select x1, x2 from t1 where (x1,x2) in (select x1,x2 from t2.....) This fails on DB2 with a message that the comma in the where clause (x1,x2) is not allowed. Thi

  • How to call a webservice on a local network

    Dear all, I'm trying to import a webservice that is running on a computer on our local network, and i always get the "validation failed" msg  whether i pass the IP adress or the computer name as url. I did some tries: - The webservice works perfectly

  • LR CC will not start.

    Installed LR CC today actually twice it will not start.  Even went to app exe in new folder and it didn't work either.