Need to re-pair Jaybird Freedom earbuds each use

I've got a pair of Jaybird Freedom earbuds that worked well with my iPhone 4S. Last week, I acquired a replacement 4S from Apple via my Applecare insurance. Now, for some reason, the pairing between the 4S and the earbuds doesn't "stick" - I need to re-pair every time I use them. Previously, I could turn on the earbuds, and they would simply connect. I have tried re-restoring my 4S from the backup I made just before obtaining the replacement iPhone, but this hasn't helped. Anybody have any ideas?
Thanks in advance!

Hello Richleyh,
Thank you for using Apple Support Communities!
It sounds like the bluetooth is not working the way it was before you got the new phone and does not automatically connect to your headset.
I would try these steps outlined in the article named iOS: How to troubleshoot Bluetooth connections found here http://support.apple.com/kb/TS4562.
Check that you are in range of the Bluetooth device with which you are trying to pair your iPhone, iPad, or iPod touch. Most Bluetooth devices have a range of approximately 30 feet.
On your iOS device, tap Settings > Bluetooth and find your device in the list. If your device says Not Connected, tap the name of your device to attempt to connect it.
Tap Settings > Bluetooth and turn Bluetooth off and then on again.
Make sure that your Bluetooth accessory is turned on and fully charged or connected to power.
Restart your iOS device.
Tap Settings > Bluetooth and locate the Bluetooth accessory you are currently connected to or attempting to connect to. Then tap > and Forget this Device. Try to pair your Bluetooth accessory again.
Note: You may need to re-enter your Bluetooth accessory PIN if your accessory requires one. Some common PINs are 0000, 1111, and 1234.
Restart your Bluetooth accessory by turning it off and then on again1.
Update your device to the latest version of software. See how to update your iPhone, iPad, or iPod touch.
If your Bluetooth accessory has upgradeable firmware, check to see that you have the latest version1, 2.
And possibly this part from down toward the bottom of the article:
Bluetooth disconnects, intermittent connectivity, or unable to find
Move your iOS device closer to the Bluetooth accessory.
Position your iOS device and Bluetooth accessory in direct line of sight of each other. For example, move the Bluetooth accessory and iOS device to the same side of your body.
Remove any case, stand, or other accessories from your iOS device and see if performance improves.
Check for sources of potential interference and move both the iOS device and the Bluetooth accessory away from other electronic devices.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN, and APN settings.
Cheers,
Sterling

Similar Messages

  • Do I need to power off my iPad after each use?

    I bought a new iPad. The problem is after each use I have to power off in Order to connect to internet. Is there something in settings I need to do in Order not to have to shut my iPAd off so often

    That shouldn't happen. I almost never turn my iPad off unless I do so for troubleshooting purposes. There is nothing in the settings that you should have to "fix" either as long as WiFi is always turned on.
    Try resetting your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How Can I get my JayBird Freedom Bluetooth Earbud Headset to Work with my MacBook Pro-Retina

    I have a 1st gen iPad and a relatively new MacBook Pro 15 Retina.  As well, I also have a Jaybird Freedom Bluetooth Earbud Headset (Mic/Stereo Speakers).  Finally, I have a Droid X (I'll explain in a minute why I mention this).
    My BT Earbuds can pair with my iPad and my Droid X just fine.  As a matter of fact, it can bind with my iPad for audio, and my Droid X for phone audio at the same time.  However, even when the Droid X and the iPad BT is disabled (on both), my MacBook Pro will not work with the Bluetooth earbuds.  I am able to pair them (it shows as a Jaybird Freed Headset, and shows that it can be used as an audio output/input device), but when I try to use the earbuds for audio, it almost hangs up for a few moments, then finally fails and reports that "there was an errr connecting to your audio device.." with the "stop using headset" as my only option.
    My MacBook Pro Gen 2 with Snow Leopard used to be able to pair with this headset.  I'm not sure if it is the OS or the newew generation laptop.  I have seen a few other threads on this, but no fixes that work for me.

    Just posted a problem I'm having connecting my Jaybird Freedom and iPhone5 (https://discussions.apple.com/thread/4716045). The Jaybirds connected fine with an iPhone4s and another (forgotten) device so I don't think the problem lies with the Jaybird. I'd be interested if you hear differently.

  • HT2845 do I need to pair the magic mouse each time I switch it off.

    Do I need to pair the magic mouse each I switch it off, or should the mouse be left in the on position all the time.

    It should pair automatically when switched back on. Having said that, I never turn BT devices off unless I am gone for a long time. BT devices automatically go into a low power mode after a short time of non-use.
    Barry

  • IPhone5 bluetoorh not connecting to Jaybird Freedom 3 headset

    My iPhone5 (iOS v6.0.2) doesn't recognize my Jaybird Freedom3 headset. I had no problems with my old iPhone4s and the Jaybird. The iPhone5 connects with my Ford bluetooth car system fine. Anyone else have problems with the Jaybird and IP5? Apple, please fix.

    I'm having the same issue with my JayBird Freedom.  As DaNiBuZ suggested you have to make sure you pair the device.  But my problem is in order to use the head phones I have to pair them again after powering them off.  I'm inclined to think it is a software issue. I have the iPhone 5 iOS 6.1.3 Life in the Technology Fast Lane. 

  • I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

    I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

    jpqcampos wrote:
    This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
    You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
    And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
    Here are the two tables, Data on the left and Summary on the right. Notes below.
    The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
    Data table:
    D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
    D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
    D3 (and filled down the rest of column D):   =AND(OR(B2,C2),NOT(OR(B3,C3)))
    The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
    Summary table:
    Column A contains labels for the age ranges to be counted.
    Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
    C2 (and filled right to column D, then both filled down to row 5):
        =COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
    Two changes from the previous example:
    COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
    The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
    See note below regarding my earlier formula.
    When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
    Close the reorganize pane, and the 'data entry form' is ready to use.
    To use, enter the age first, then check one of the boxes.
    As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
    Regards,
    Barry
    Note regarding formula in my earlier post:
    The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
    In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
    Fill down to E8.
    Ignore the instructions (in that post) following "Fill down to E8."
    B

  • Why do i need to buy the same app for each device over and over again??

    why do i need to buy the same app for each device over and over again??
    and why cant i just pay for the app ones for all devices as long at it is with the same account??
    i hate that i have to oay for the same game or app three time one for ipad ones for iphone and ones for mac please do something about that apple..!!!

    First, you posted in the Mac App Store forum which are apps for the Mac OS X, not iOS devices.
    You do not need to re purchase your apps. Connect your iOS devices to your computer, launch iTunes. From the menu bar click Apps then click Sync
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Need to get the exact time of each picture that I saved ( maybe as a excel sheet or word )

    Hi guys,
    I am actually a new labview user. I have successfullly been able to save pictures. But unfortunately I got two problems. The first one is that I need to use two cameras at the same time. The program I have so far is for one camera. The second problem is that I need to get the exact time for each picture saved in the profile.
    I would appreciate if someone can help me with that. Anyway plz find attached the subvi.
    Regards,
    Abbas
    Attachments:
    Abbas progress.vi ‏54 KB

    Hi Abbas,
    First, I notice that you are using IMAQ for USB.  Is there any particular reason you are not using IMAQdx?  This is the newer, supported driver for use with USB cameras that supports acquiring from multiple cameras at the same time. 
    Check these two articles:
    Can I Acquire from Multiple USB Cameras Simultaneously Using IMAQdx?
    Can I Acquire from Two USB Cameras Simultaneously with NI-IMAQ for USB Cameras 1.0?
    And also this example (if you camera does not support acquiring from multiple cameras at the same time):
    Toggle Between Multiple USB Cameras
    As for timestamps, some cameras output them with the frame timing.  However, usually this is not a feature of USB cameras; if it is not, you can look into timing options within LabVIEW.  Try playing with the property node for IMAQdx and the Acquisition Attributes.
    Cheers,
    Marti C
    Applications Engineer
    National Instruments
    NI Medical

  • Need more info abt the functions of each classes in Workflow API's of BPEL

    Need more information about the functions of each method of the classes in Workflow API's of BPEL
    The Java documentation of the workflow API (especially Identity Service classes) is having a one liner explanation for the methods of each class. We need to implement our own Identity Service that implements the BPMIdentityService interface. We are not able to map the function of each methods of this interface to what our security subsystem provides. We feel that we need more detailed information about what each method of each class is doing internally so that we can map to whatever our security subsystem provides.
    The BPEL Developers Guide does not talk about the functionality of each methods of this interface. If anybody can guide me to look into some documentation that has this information or if anybody has this information, then please do the necessary help.
    Regards
    Ramana

    Did you find out the solution for your above posted query ? I'm also in need of some documents. Can you help me out?

  • Need to store multiple xml files as each record in oracle table

    Hi All,
    I have a set of XML files (say 20 xml files). I need to store the enitire content of each file as a string into the oracle table.
    Do we have any PL/SQL procedures which will do this job. I will pass the path of the directory to the procedure, so that it takes all the xml files and store it in the table.
    After that i need to remove some tags of the xml. so it will be better if we store records as a string rather than of xmltype.
    Please help in achieving this.
    Thanks in Advance,
    Ram Mohan T

    Hi Gyanchand,
    I have wrote an article BizTalk Server 2010: Grouping
    and Debatching/Splitting Inbound Messages (TypedPolled) from WCF-SQL Adapter  which is for SQL, but yes same can be done with Oracle.
    If grouping is not required then, you can overlook it and apply debatching only.
    Maheshkumar
    S Tiwari|User
    Page|Blog|BizTalk
    Server: Multiple XML files to Single FlatFile Using File Adapter

  • Need to refresh my report OBIEE for each ten min intervel

    Hello All,
    I have following requirement,
    Requirement 1 :-
    I need to refresh my OBIEE report for each 10 min.
    Could you please any one suggest me how to configure the report to refresh automatically for each 10 min
    Requirement 2:-
    I had changed the column name in the presentation layer, on the basis of the column i had build few report
    How i can update that column name in all the reports. I need to update manually or automatically is it get update?
    Regards,
    Krishna reddy

    Thanks Srini for your reply.
    on goggling i also found following workaround on report refresh
    http://biztricz.blogspot.in/2010/11/refresh-only-particular-reports-in.html
    Request 2:
    I did work around that ,
    if you change the column name in the presentation layer it will automatically reflect in all the report which all using that column
    Regards,
    Krishna

  • Are the JayBird Freedom Sprint Bluetooth Headphones good for the iPod air

    Are the JayBird Freedom Sprint Bluetooth Headphones good for the iPod air

    I have the motorola S9. Works great through the whole house. Listening to them right now as I type. Odd, I can hear the click of the keyboard through the headphones.

  • Need help to pair two iPhones?

    Need help to pair two iPhones 3GS. Both have Bluetooth turned on but only one shows the other phone. Please help?

    What are you trying to accomplish?
    Iphones support bluetooth for stereo speakers/headsets, hadsfree telephone devices/headsets, some peer-to-peer apps from the app store, some keyboards and internet tethering where provided by the carrier.
    Other than this it will not connect to another phone/device/computer.
    File transfer is not supported at all.

  • Problemas con Jaybird Freedom Bluetooth headphones

    Mi nuevo Z3 Compact no funciona correctamente con los audífonos, solo suena por el auricular derecho

    My Z3 Compact is not working properly with Jaybird Freedom bluetooth headphones. I only can listen through right earpiece

  • My iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?

    my iPad will not auto-connect to my network. I need to type in a security key each time. Is there a way aound this?
    Thanks

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for